CS Paper Radar

Multitask Scanning Probe Microscopy

Aditya Raghavan, Yu Liu, Ian Mercer, JP Maria, Sergei Kalinin

cs.LG cond-mat.mtrl-sciphysics.ins-det ·submitted 2026-08-10 04:19 UTC · v1

Abstract

Scanning probe microscopy provides nanoscale access to structural, electrical, electromechanical, magnetic, and mechanical properties of materials. Its increasing use for wafer-scale characterization and combinatorial materials exploration creates a need to distribute measurements efficiently across large spatial domains. This is particularly important when available modalities differ in acquisition time and potential for tip and sample damage, making exhaustive multimodal mapping over spatial grids impractical. Here, we demonstrate multitask scanning probe microscopy, a live, closed-loop workflow in which a multitask Gaussian process learns spatial and cross-modal relationships and autonomously selects both the next measurement location and the next experimental protocol. The approach is implemented on an automated large-sample atomic force microscope and demonstrated on a composition-spread AlScN wafer using tapping-mode and Dual AC Resonance Tracking (DART) measurements. Paired initial measurements establish the relation between the tasks, after which noncoincident measurements are used to update both response landscapes. The resulting workflow extends active learning in scanning probe microscopy from spatial sampling to autonomous allocation of measurement modalities and provides a basis for combining rapid, weakly perturbative imaging with slower contact, electrical, electromechanical, magnetic, or spectroscopic measurements.

Closest papers

Nearest neighbours by meaning across the whole index.

Building heterogeneous multistep workflows in automated microscopy: reward design and knowledge transfer for autonomous structure property discovery

cs.LG ·2026-11-08 ·Sergei V. Kalinin
similarity 0.60
Abstract

Autonomous microscopy can turn fast acquisition into scientific progress when it decides not only where to measure, but also what information to acquire, at what scan rate, and when to recalibrate the instrument. We develop a budget constrained framework for such multistep structure-property workflows. It combines explicit scientific rewards, action costs, instrument observation models, transfer of pre experiment knowledge into the online campaign, and evaluation kept independent of the controller. The transferred knowledge includes predictor accuracy and computational cost, empirical learner maturity functions that weight model-derived rewards, and drift characteristics established before controller training. Using a real electron energy-loss spectroscopy dataset, we run two complementary campaigns. In the first, the controller chooses between imaging and spectroscopy, image size, and scan speed. In the second, the instrument drifts and the controller also decides when to recalibrate. The campaigns show that response discovery and structure-property learning favor different surrogate models and acquisition strategies. They also show that simple acquisition rules form strong, practical baselines. Independent error analysis reveals where model uncertainty is and is not a reliable learning signal. In the drift campaign, explicit registration greatly improves positional accuracy, and the framework measures what this costs in spectroscopy throughput. Together, these results provide a reproducible way to design, compare, and audit autonomous experiments, and they define what microscopes must provide for deployment: independently executable actions, characterized scan and detector responses, timestamped registration telemetry, and complete action records.

0.20

Real-Time Atomic-Resolution Electron Phase Imaging without Probe Calibration via Ptychography-Supervised Learning

cs.CV cond-mat.mtrl-sci ·2026-09-22 ·H. Yue, C. -C. Chen, C. -N. Hsiao, J. Cheng, Y. Liu +2 more
similarity 0.57
Abstract · Submitted to Advanced Science on June 18, 2026

Atomic-scale phase imaging is central to resolving defects, interfaces, and weakly scattering atoms that govern the behavior of nanoscale materials. Electron ptychography delivers sub-ångström phase sensitivity but remains an offline technique, because its iterative reconstruction is computationally expensive and sensitive to experimental calibration, preventing live use during data acquisition. Here, a ptychography-supervised local inference framework is presented that converts four-dimensional scanning transmission electron microscopy (4D-STEM) into an acquisition-compatible phase-imaging workflow. Physics-constrained reference phase maps reconstructed from a single experimental AuPd dataset serve as teacher labels for a compact model that predicts local phase patches directly from diffraction measurements, without explicit probe input or online iterative optimization. Full-field images are assembled by deterministic overlap stitching. The workflow reaches an online latency of about 0.27 ms per probe position and a throughput of about 20,000 positions per second, an approximately 1,000-fold speed-up over GPU-accelerated ePIE, while preserving atomic-scale lattice contrast and reciprocal-space fidelity. Without fine-tuning, the same model transfers across materials (WS2), defocus conditions (high-entropy alloy nanoparticles), and instruments (hBN at 300 kV). The approach amortizes ptychographic redundancy into a fast, generalizable workflow that enables real-time atomic-scale phase imaging for materials microscopy.

0.14

AutoRASOR: Autonomous Rapid Scanning Electron Microscope Operator

eess.IV cond-mat.mtrl-sci ·2026-09-18 ·Kevin Zhang, Mohammad Taha, Rafael Espinosa Castañeda, Yutong Liu, Yin Zhu +5 more
similarity 0.57
Abstract

Scanning Electron Microscopy (SEM) is a foundational technique for characterizing material microstructure, which dictates many fundamental physical and chemical properties. With the rise of Self-Driving Labs (SDLs), samples are now synthesized in large batches, demanding equally high-throughput, autonomous characterization. Existing automated electron microscopy pipelines are task-specific: they detect pre-defined features, optimize known properties, or require prior knowledge of the sample, restricting each pipeline to the material system it was built for. We introduce AutoRASOR, a task-agnostic autonomous SEM pipeline that captures the multi-scale morphology of an unknown sample without domain-specific pre-training, fine-tuning, or human prompting. AutoRASOR embeds micrographs in real time with a vision foundation model (VFM), DINOv3, and selects regions of interest (ROIs) through two complementary policies: Latent Farthest Point Sampling (LFPS) and active learning on morphological ambiguity, which is the conditional variance of unresolved fine-scale features given lower magnification appearance. Active learning on ambiguity consistently captures more diverse and rare morphologies than random ROI selection, while LFPS reliably recovers the specimen's morphological distribution within a limited capture budget, tested both on real SEM micrographs and synthetic phase-field images. By shifting autonomous characterization from pre-defined, task-specific targeting of features to morphological survey, AutoRASOR generates information-rich multi-scale datasets for diverse downstream tasks. Without the need for domain-specific pre-training or prior material assumptions, this framework can be deployed out-of-the-box to characterize novel materials produced by SDLs.

0.31

Physics-Informed Sequential Reconstruction of Scanning Probe Microscopy Images with Calibrated Uncertainty

eess.IV ·2026-09-09 ·Surya Prakash Reddy, Sergei V. Kalinin
similarity 0.56
Abstract

Scanning probe microscopy (SPM) has become a mainstay of materials science, condensed matter physics, nanotechnology, biology, and semiconductor metrology. An SPM image, however, is acquired sequentially as the probe traverses the surface under closed-loop feedback while thermal drift, feedback dynamics, tip state, mechanical disturbances, and electronic noise evolve during the experiment. Image correction has therefore become an intrinsic part of SPM data analysis. Classical approaches rely on line leveling, filtering, registration, interpolation, and explicit models of tip or scanner distortions, whereas recent work increasingly uses neural networks trained to map corrupted images to corrected ones. Here, we explore a different formulation in which SPM reconstruction is treated as a Bayesian sequential state-estimation problem. The hidden state represents surface height and its low-order evolution along the slow-scan direction; an artifact-dependent quality score continuously modifies the observation likelihood; a forward Kalman pass provides the causal estimate and innovation diagnostics; and a Rauch-Tung-Striebel (RTS) backward pass incorporates information from the complete acquisition. The result is a reconstructed surface, a relative posterior uncertainty map, and line-resolved diagnostic signals. The recursion is computationally lightweight and scales linearly with the number of image pixels, while the physical parameters can in principle be initialized from instrument characterization or from priors learned during previous operation, an extension not exercised here. We organize the method as a multi-axis family of models so that the contributions of state representation, artifact recognition, lateral coupling, and acquisition redundancy can be evaluated independently.

0.29

Spatial-Frequency Learning for Scanning Transmission Electron Microscopy Image Enhancement

cs.CV ·2026-10-27 ·Hesong Li, Ying Fu, Ziqi Wu, Ruiwen Shao, Tao Zhang
top venuedataset similarity 0.56
Abstract · Accepted by IEEE TPAMI

Scanning Transmission Electron Microscopy (STEM) enables the observation of atomic arrangements at sub-angstrom resolution and plays a key role in the discovery and characterization of advanced materials. Raw STEM images are often noisy and blurred due to multiple degradations. Although recent deep learning methods improve STEM images, their performance remains limited under severe degradations. In this work, we propose a spatial-frequency learning framework for STEM image enhancement. Specifically, we design a spatial-frequency fusion network that exploits periodic atomic arrangements in the frequency domain and restores local atomic details in the spatial domain. Spatial- and frequency-domain features are enhanced separately and then fused. We also present a STEM noise calibration method for synthesizing more realistic STEM images. The parameters of scan noise, pointwise noise, and background noise are estimated through statistical analysis and fitting of real STEM images. Using these calibrated parameters, we construct a diverse dataset containing a wider range of atomic arrangements, imaging modes, and degradations. Random masks combine different atomic arrangements to simulate interfaces between multiple materials. Experimental results demonstrate that our method achieves state-of-the-art enhancement performance on synthetic datasets and real images of advanced materials while improving atomic localization accuracy.

0.58

An Interactive, Automated 4D-STEM data acquisition and analysis routine for Scanning Electron Nanobeam Diffraction and Ptychography experiments

cs.CV physics.ins-det ·2026-08-13 ·Mohsen Danaie, Max England, Yiming Xu, Ruomu Zhang, Ed Darnbrough +9 more
similarity 0.55
Abstract · 41 pages, 7 figures, 11 SI figures

Modern transmission electron microscopes are versatile instruments which have become indispensable tools for understanding structure and chemical composition at the nano- and atomic scale. In the physical sciences these instruments are still largely manually controlled, requiring significant operator expertise, limiting throughput, and precluding statistical analysis of large datasets. Recent technical advances in both hardware and in control software now allow for the interaction with almost every functionality of the microscope through a programming interface. This enables better experimental design and data collection automation while also reducing operator collection bias and required expertise. In this study, we present an automated data collection routine with machine-driven decision-making to enable the collection of hundreds of 4D-STEM nanobeam diffraction and ptychography data from a large distribution of size-selectively deposited Pt nanoparticles. We present a semi-automated data analysis workflow to extract pertinent information from the large volumes of collected data. For the nanobeam diffraction data, reducing each dataset to its azimuthal variance profile and combining automated crystal orientation mapping with per-particle morphology descriptors reveals the orientation, shape and phase distributions across the ensemble, including a weak {110} texture. For the ptychographic data, an automated screening pipeline identifies on-zone-axis particles and enables atomic-resolution phase imaging and lattice-strain mapping of individual grains. Together these demonstrate how automation turns instrument throughput into statistically meaningful, atomic-scale microstructural information.

0.10

Agentic AI for operating scientific instruments for nanoscale characterization

cs.AI physics.ins-det ·2026-08-25 ·Zahra Ayar, Marcos Penedo, Mahdi Mehdikhani, Nahid Hosseini, Prabhu Prasad Swain +1 more
similarity 0.55
Abstract

Operating a scientific instrument such as an atomic force microscope (AFM) requires continuous expert decision-making. A trained user defines the experimental intent, translates it into instrument commands, assesses incoming data, adjusts imaging parameters, and post-processes the final image. Existing automation usually addresses only parts of this workflow through hard-coded routines, task-specific controllers, or trained machine-learning models. Here we present an agentic-AI framework that operates the executable part of the AFM workflow using a general-purpose, tool-augmented large language model connected to instrument functions through the Model Context Protocol (MCP). The framework consists of 3 MCP-based agents: AFM Messenger converts natural-language instructions into checked instrument commands; AFM Pilot assesses image quality through a large language model (LLM) and, if necessary, adapts imaging parameters; and AFM Doctor diagnoses image artifacts and applies transparent post-processing from a pre-approved tool set. Because the language model performs image assessment rather than a fixed scalar objective or external optimizer, the same strategy can be applied across sample types and imaging modes without specific retraining. Safe hardware operation is enforced through an ambiguity check layer before execution. Benchmarking against fine-tuned and off-the-shelf tool-using models shows that this guarded execution layer, rather than model capability alone, reduces wrong-command execution to zero. In live experiments on different samples, AFM Pilot matched expert operators in image quality, iteration count, and tuning time, with no significant difference. These results demonstrate a safe route to agentic operation of scientific instruments, where experimental intent remains human-defined while command execution, image-based tuning, and post-processing are delegated to AI agents.

0.34

A Digital Simulation Toolkit for Physics-Based Generation of Realistic Experimental Scanning Tunneling Microscopy Images

cs.LG cond-mat.mtrl-sci ·2026-09-29 ·Huanhuan Zhao, Laxmi Bhurtel, Connor Vernachio, Fahmy Paiziah, Wonhee Ko +1 more
similarity 0.54
Abstract · 17 pages, 6 figures in main text and 2 supplementary figures

Scanning Tunneling Microscopy (STM) is a widely used tool for characterizing surfaces of materials at the atomic scale, playing a crucial role in discoveries across condensed matter physics and materials science. Despite its extreme spatial resolution, STM is one of the most sensitive microscopy techniques and is highly prone to noise. While existing unsupervised denoising methods are very cheap to train, these are primarily focused on removing the noise with minimal recovery of key physical information. While supervised methods can offer superior performance, the major bottleneck is that a large amount of paired clean-noisy experimental images is required which are impractical to obtain. Thus, we developed a low-cost physics-driven digital toolkit to rapidly generate large volume of realistic STM images. Firstly, we simulate clean images from a chosen material system. Then, with prior knowledge of the physical characteristics of the artifacts and noise present in STM experiments, we formulate several artifact-noise functions such as Gaussian electronic noise, 1/f flicker noise, scan-line noise, background tilt and mechanical drift. These physically informed noise components are then added to the simulated clean images to generate realistic STM images. We demonstrated the capability of the proposed digital toolkit to generate AI-ready data for denoising images of the (111) surfaces of copper and lead, while preserving atoms, defects, and electron waves. We also validated the quality of the downstream image analysis of learning electron wave patterns induced by quantum interference from Cu(111) images. Results show that the supervised models trained on digitally generated AI-ready data can more effectively denoise and learn electron wave patterns on Cu(111) images than benchmarked unsupervised approaches, indicating that the proposed toolkit facilitate scientific discovery.

0.26