CS Paper Radar

CADEngBench: It Looks Like CAD, but Does It Work? Evaluating Parametric Design, Assembly Reasoning, and Physics Simulation

Harmanjot Singh, Abhra Dubey, Jorge Alejandro Amador Herrera

cs.AI cs.CVcs.LGcs.RO ·submitted 2026-08-10 08:47 UTC · v1
benchmarkhighly cited

Abstract

A CAD model is not engineering-grade merely because it looks correct. It must satisfy design requirements, respond predictably to parameter changes, support controlled edits, match a reference structural response under a declared analysis, and connect to other parts through valid joints. We present CADEngBench, a two-track benchmark for these capabilities. CADEngBench-P evaluates 300 parametric parts, each used for one zero-to-CAD task and one functional-editing task (600 tasks in total), through boundary-representation (B-Rep) validity, engineering and DFM checks, parameter-family perturbations, functional editing, and matched linear-static FEA in CalculiX. CADEngBench-A evaluates 150 body pairs through ranked joint retrieval, exact face-and-edge grounding, joint-frame prediction, and kinematic verification. Across eight multimodal, code-capable models, editing supplied CAD is substantially easier than generating it, while complex edits and matched FEA remain difficult. Assembly predictions often locate the relevant region but fail to recover the recorded joint or mating entities. These results show that CAD evaluation must test engineering behavior rather than appearance alone.

Closest papers

Nearest neighbours by meaning across the whole index.

Can It Actually Work? Synthesizing Functional CAD Mechanisms

cs.CV cs.CLcs.GR ·2026-10-19 ·Wenqian Zhang, Yangyi Huang, Zigeng Xu, Weiyang Liu, Zhen Liu
benchmarkcode/data similarity 0.75
Abstract · 45 pages, 16 figures, project page: https://thegenlab.ai/funcad/

While LLM agents can generate visually plausible CAD assemblies, these designs often fail to fulfill their intended physical functions. We study functional CAD design, a setting where agents interpret underspecified requests to construct and iteratively revise mechanisms that satisfy functional requirements in physical simulation. Verifying these requirements is nontrivial: different candidate mechanisms may realize the same function through entirely different components, controls, and operating sequences. To bridge this gap, we propose FunCAD-Harness, a framework that translates abstract requirements into candidate-specific physical tests and uses simulation feedback to guide design revisions. To systematically evaluate this capability, we introduce FunCADBench, a benchmark spanning 46 mechanism families with interdependent and multi-step operations. Experiments across frontier LLM agents show that FunCAD-Harness exposes subtle mechanical failures invisible to visual inspection, substantially improving functional success rates over standard simulation-augmented baselines. Ultimately, our work marks a step toward CAD agents capable of translating human intent into working mechanisms.

0.39

RealCADBench: Benchmarking Parametric CAD Modeling from Industrial Design Intents

cs.CV cs.CL ·2026-09-03 ·Guanlin Li, Zhichao Huang, Huimu Yu, Yichen Long, Hongsen Liu +6 more
benchmark similarity 0.74
Abstract

Parametric computer-aided design (CAD) modeling is difficult to evaluate with a single metric. Existing CAD benchmarks often emphasize synthetic or CAD-native settings, limited input modalities, or executability and IoUs alone. We introduce RealCADBench, a benchmark for intent-to-program CAD modeling from real industrial design intents. It contains 12,632 tasks from 19 factory-automation categories and spans text descriptions, 2D engineering drawings, real product pictures, and rendered images for both Part and Assembly modeling. We report results on a 1,770-task evaluation slice: 1,745 Part tasks across four input regimes and RCB-Assm25, a 25-task assembly study used in every reported assembly comparison. Each method generates FreeCAD API Python, which a shared runtime executes to export the 3D model. We evaluate the exported model using executability, Solid IoU, Surface IoU, and a rubric-based visual-semantic identity Judge. Among the nine standalone frontier large models evaluated, no model leads all four metrics. Across six frontier-scale large models, executability ranges from 0.565 to 0.812, Solid IoU from 0.2841 to 0.5379, and Surface IoU from 0.112 to 0.217 across the four Part regimes. The highest regime-balanced composite comes from a different model than the leaders on the four component metrics. On RCB-Assm25, Codex with GPT-5.5 improves executability and both IoU metrics over standalone GPT-5.5, but lowers the Judge score by 6.98 percentage points, leaving GPT-5.5 as the Judge leader. We also observe recurring failure modes, most notably missing fine structures, loss of part identity, and incorrect assembly placement. These results show that execution alone is insufficient to characterize realistic CAD modeling and that frontier models and agents differ substantially across executability, IoUs, and visual-semantic identity.

0.26

CADWorld: Computer-Use Benchmark for Long-Horizon Computer-Aided Design

cs.AI ·2026-09-14 ·Zihan Dong, Yuanzhe Liu, Zhiyuan Ma, Qishi Zhan, Dehan Kong +2 more
benchmark similarity 0.73
Abstract

Computer-use agents are increasingly evaluated in realistic desktop environments, but existing benchmarks provide limited coverage of professional engineering workflows whose outputs are persistent, structured artifacts. Mechanical computer-aided design (CAD) is a particularly demanding setting: an agent must manipulate geometry and constraints over long interaction horizons while producing a native project whose dimensions, construction structure, and downstream engineering state remain valid. We introduce \textbf{CADWorld}, a benchmark for long-horizon computer use in FreeCAD. CADWorld contains 200 tasks spanning 11 mechanical-CAD workflow categories, including sketching, part modeling, assembly, CAM, FEM, measurement, mesh processing, and technical drawing. Agents operate through screenshots and GUI actions, while success is determined by task-specific executable checks over saved FreeCAD artifacts and auxiliary outputs, covering geometric properties, parametric structure, constraints, manufacturing state, and simulation results. Across seven current agents on the full benchmark, the strongest agent achieves 17.5\% success, compared with an 87.0\% expert reference pass. We find that weaker agents often fail before producing a valid artifact, whereas stronger agents increasingly fail on structural, geometric, and construction-process requirements. CADWorld therefore exposes a gap between general GUI competence and reliable execution of persistent, verifiable engineering workflows. Project accessible at https://cad-world.github.io.

0.46

Parametric CAD Bench v3: Evaluating Agentic Parametric CAD Authoring from Text and Engineering Drawings

cs.AI cs.CVcs.GRcs.LG ·2026-11-02 ·Mei Chen, Yu Xia, Haipeng Mao
benchmarkcode/data similarity 0.73
Abstract · 31 pages, 12 figures, 11 tables. Benchmark: https://cadbench.ai/ ; tasks and leaderboard: https://hub.harborframework.com/datasets/gnucleus-…

Producing an executable CAD script is not sufficient to establish that an agent has satisfied an engineering design request. Evaluation must also consider the resulting geometry, specified dimensions, and native CAD modeling history. We present Parametric CAD Bench v3, a 100-task benchmark comprising 30 text-to-CAD creation tasks, 30 text-to-CAD create-and-edit tasks, and 40 tasks that reconstruct mechanical parts from engineering drawings. Agents operate in a pinned FreeCAD environment and submit native CAD artifacts to a separate programmatic verifier. The primary metric is mean continuous task reward, combining geometry similarity and specification consistency rather than binary task success. A September 24, 2026 snapshot covers 13 model-agent systems; Claude Code with Claude Opus 5.5 achieves the highest overall point estimate, 61.03%, and an image-to-CAD mean reward of 84.66%. These measurements describe complete systems, not isolated model capabilities. We release versioned tasks, evaluation configurations, and inspectable result artifacts.

0.31

CADFather: Autonomous CAD Reconstruction through Coordinated Tool Use

cs.AI cs.LG ·2026-10-06 ·Gennadiy Savrasov, Maksim Elistratov, Nikita Gavrilov, Albert Garifullin, Oleg Pavlov +5 more
similarity 0.70
Abstract · 17 pages, 7 figures, 6 tables

Reconstructing an editable CAD model from a 3D shape remains a challenging engineering task. Existing methods can propose CAD operations, but no single source of proposals works equally well across different part geometries and stages of reconstruction. We introduce CADFather, an autonomous agentic system that coordinates complementary tools to recover parametric CAD programs from 3D meshes. A vision-language assistant inspects renders of the target and intermediate reconstructions, then decides which candidate CAD programs to extend, which tools to invoke, how many proposals to generate, and when to finish. Learned and algorithmic tools propose CAD operations, while numerical optimization refines the parameters of existing programs. Proposed or refined programs are executed and evaluated to provide feedback for subsequent decisions. The agent maintains alternative candidate programs for each target part and preserves the best valid result throughout reconstruction. CADFather uses pretrained generation and assistant models without additional training. We evaluate reconstruction quality and execution validity on the full DeepCAD, Fusion360, and MCB test sets, as well as on CADENA-Bench, CADBench, and BenchCAD. We additionally analyze computational cost and the trade-off between cost and reconstruction quality.

0.18

VisCAD: A Foundation Model Suite with Multimodal Industrial CAD Intelligence

cs.CV cs.CL ·2026-09-03 ·Guanlin Li, Zhichao Huang, Huimu Yu, Yichen Long, Hongsen Liu +7 more
similarity 0.70
Abstract · Technical report

AI-assisted computer-aided design (CAD) for industrial products involves two challenging phases. Part-level generation maps diverse forms of user intent, including renders, text descriptions, 2D drawings, and real photographs, to executable programs in a CAD domain-specific language. Assembly-level generation must additionally handle interacting parts, plan mating relations, estimate poses, and place all parts correctly. Existing specialized CAD models are commonly trained on narrow input domains, such as renders or texts, and often generalize poorly, while general-purpose frontier models cover broader inputs but perform inconsistently across CAD domains. We present VisCAD, a foundation model suite designed to provide both broad generalization and strong CAD capability for realistic industrial products. At its core is VisCAD-M1, a 27B model trained through mid-training and post-training for part-level design generation. On PubCADBench and RealCADBench, VisCAD-M1 achieves the highest average part-level score among the evaluated models, reaching 0.5540 compared with 0.5496 for the strongest frontier model. Reusing VisCAD-M1 as a test-time verifier can further raise the score to 0.5797, an approximately 5 percent relative improvement over the previous state of the art. VisCAD also includes a domain-specific harness that leverages frontier models for complex assembly generation and demonstrates advantages over general-purpose harnesses in both quantitative and qualitative evaluations.

0.08

ReliCAD: From Uncertain LLM Generation to Reliable Parametric CAD Modeling

cs.RO ·2026-09-16 ·Peng Zheng, Xintong Dong, Chuanyang Li, Jiaxin Jing, Chuqi Han +3 more
similarity 0.68
Abstract

Large language models have shown considerable potential for natural-language-driven parametric CAD modeling. However, a fundamental contradiction exists between their probabilistic generation and the deterministic requirements of CAD modeling, resulting in limitations in reliability, design-intent preservation, and geometric validity. Existing methods typically rely on large-scale annotated datasets, lack explicit modeling of design intent, and underutilize the deterministic capabilities of CAD kernels. To address these limitations, we propose ReliCAD, a unified framework that transforms uncertain LLM generation into reliable parametric CAD modeling. Through explicit design-intent modeling, ReliCAD converts user requirements into structured design specifications and explicitly models geometric relations, topological dependencies, and feature construction order. It then generates constraint-aware parametric instructions and invokes the CAD kernel through an Agent-ready API to perform geometric construction and constraint solving. ReliCAD further records runtime evidence and employs a verification-feedback mechanism to assess consistency between the generated model and the design specifications, enabling error localization and iterative repair. Experiments on the public HistCAD generation dataset and our multi-granularity CAD editing dataset demonstrate that ReliCAD significantly outperforms baseline methods, achieving 99.8\% validity rate and 0.8753 IoU. ReliCAD provides a verifiable, repairable, and generalizable approach to natural-language-interactive CAD modeling.

0.12

PhyCAD: Physics-Aware Text-to-CAD Generation via Hierarchical Reinforcement Learning

cs.AI ·2026-11-06 ·Yuxin Cui, Weijie Zheng, Zhengyang Li, Han Wang, Wenjie Feng +1 more
dataset similarity 0.68
Abstract

Language-driven computer-aided design (CAD) generation enables the creation of editable parametric models from text, yet geometric correctness alone does not ensure physical feasibility. We present PhyCAD, a framework for physics-aware Text-to-CAD generation that trains language models to produce executable CadQuery programs under geometric and physical constraints. To support this setting, we construct a Text-to-CAD dataset that links parametric CAD models with geometric specifications, loading conditions, and physical constraints. We further develop an automated CAD--CAE verifier that combines program execution, geometric checks, and finite element analysis to provide feedback for model training. A key learning challenge is to prioritize joint satisfaction of geometric and physical constraints while retaining informative feedback on partial progress. A flat aggregation of heterogeneous rewards can obscure this priority, allowing improvements in individual criteria to compensate for unmet design requirements. We therefore introduce a Hierarchical Balanced Advantage for Group Relative Policy Optimization, grouping candidates into levels according to their verification status and combining between-level progress with objective-wise peer ranking within each level. This formulation preserves cross-level priority in the training signal while providing fine-grained feedback for satisfying constraints and improving feasible designs. Experiments across multiple language models show that PhyCAD consistently improves joint geometric and physical constraint satisfaction. These results demonstrate the value of verifiable engineering feedback for advancing language-driven CAD generation beyond geometric reconstruction toward physics-aware design.

0.19