CS Paper Radar

Removing Infrastructure Barriers in Human-Robot Collaboration Through Wireless Reconfigurable Cells

Emma Takács, Mátyás Hajós, Ádám Juniki, Ádám Fischer, Zoltán Komáromi, Kristóf Abai, Dániel Horváth, Sándor Máthé, Konstantinos Kousias, Bence Tipary

cs.RO cs.CVcs.HCcs.NI ·submitted 2026-08-10 14:34 UTC · v1
published

Abstract

Human-Robot Collaboration (HRC) plays a vital role in dynamic, high mix, low volume industrial scenarios such as remanufacturing, which frequently face workcell rearrangements. Traditional setups are constrained by power and data cabling, restricting modularity and reconfigurations, while the selection of commercial wireless devices suitable for real-time perception and safe collaboration are limited in availability. This paper presents a highly flexible, wireless, 5G-based system that serves as a versatile experimental testbed for applications including remanufacturing, operator training, and user studies. To eliminate infrastructure barriers, the workcell integrates a novel battery-powered, multi-sensor platform prototype. Additionally, to support operator safety and system adaptability across environmental shifts, the system integrates a computer vision module for object detection and pose estimation, further augmented for robust hand recognition. Trained on synthetic and real data, the model reliably detects oriented grasping poses and human hands across varying lighting and background conditions (with an mAP@50-95 of 97.74 +- 0.10% and a mean inference time of 12.5 ms). Offloading these computationally intensive tasks to the edge via 5G, the proposed architecture contributes to resolving the bandwidth-latency trade-off. To demonstrate portability, the system was implemented in both Hungary and Norway, and was evaluated across a combination of public and private, Standalone and Non-Standalone 5G infrastructures. The performed network experiments produced results in round-trip response times down to 12 ms in case of compatible network-device pairings, suitable for safe, adaptive HRC. However, these measurements also revealed practical limitations related to interoperability in current 5G deployments that should be addressed in future works.

Comment
Accepted at the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). A supplementary video demonstrating the workcell is available at https://youtu.be/zobin6oytGk

Closest papers

Nearest neighbours by meaning across the whole index.

ALFRED: Requirement-driven development of an open-source mobile manipulator for long-term plant monitoring

cs.RO cs.ARcs.CV ·2026-10-01 ·Ciarán Miceal Johnson, Christopher Quail, Garry Ellard, Alistair McConnell, Steve Tonneau +1 more
code/data similarity 0.61
Abstract · 36 pages, 19 figures

Tracking seasonal change in crops and forests requires observing the same plants repeatedly. Ground robots can do this at close range, and a manipulator gives their sensors more viewpoints. Yet the robots behind long-term field datasets are rarely released with their design files, and how a robot's own structure limits arm reach and occludes its sensors is seldom compared between builds. We present ALFRED, an open-source mobile manipulator built from commercially available components. It carries a six-degree-of-freedom arm, LiDAR, RGB-D cameras, RTK GNSS and an IMU on an Ackermann-steered base, all mounted on a reconfigurable aluminium strut frame, and runs containerised ROS software. It was developed through four builds against six requirements for repeated outdoor deployment: durability, modularity, repairability, sensing reach, endurance and reproducibility. Model-based analysis of the last three builds shows the usable share of the arm's reachable poses rising from 34.0% to 60.0% and then 66.1%, and ray casting shows that only the final build keeps the frame-mounted LiDAR's horizontal view clear both forwards and backwards. ALFRED completed a year of monthly forest surveys (528 traversals) without missing a scheduled collection. This was despite battery degradation, reconfiguration for another researcher's study, and the parallel development of ALFRED 2.0 for autonomous crop-row operation, with each switch between builds taking about six hours. The deployment also showed that mechanical modularity is only as dependable as the robot description that tracks it.

0.36

Semi-Autonomous Prosthesis Control Empowered by 5G and Mobile Edge Computing

eess.SY ·2026-08-31 ·Ozan Karaali, Hossam Farag, Strahinja Dosen, Cedomir Stefanovic
similarity 0.60
Abstract

Prosthetic hands equipped with cameras can use computer vision to plan grasps automatically, reducing cognitive effort. However, running modern vision models on wearable devices is impractical due to power and processing constraints. We present the first prototype of a 5G-connected mobile edge computing (MEC)-enabled semi-autonomous prosthetic hand, which streams RGB-D images to an edge server for real-time grasp planning. Thirteen able-bodied participants performed pick-and-place tasks under six conditions: manual EMG control, on-device inference, wired Ethernet connectivity, and three 5G connectivity configurations (private 20 MHz network, private 100 MHz network, and a commercial 5G link) to the server. All network-based conditions performed similarly, achieving task times around 8.6 s (34% faster than manual control), failure rates of 20-38%, and 62% lower overall workload. On-device processing performed the worst with 10.3 s task time and a 76% failure rate due to slow embedded inference (3 fps vs. 6-20 fps over the network). Network latencies remained below 180 ms for private 5G and 270 ms for commercial 5G. All 5G configurations, including bandwidth-constrained and commercially variable networks, matched wired Ethernet performance while significantly outperforming both manual control and local processing, establishing 5G edge-offloading as a practical path to deploying compute-intensive prosthesis control.

0.19

MABEL: An Open Anthropomorphic Mobile Bimanual Platform for Teleoperation and Learning

cs.RO ·2026-11-02 ·Qilong Cheng, Rooholla Khorrambakht, Mohamed Yassine Kabouri, Quang Nam Nguyen, Luca Macesanu +3 more
code/data similarity 0.60
Abstract · 8 pages, 10 figures, 1 table. Project page: https://robotmabel.github.io/website/

As robot learning moves beyond the tabletop, many tasks require mobility, adjustable reach, active perception, and bimanual dexterity. Commercial platforms combining these capabilities are costly, while affordable open-source alternatives cover only a subset and require software integration. We present MABEL, an open-source anthropomorphic mobile bimanual robot with 56 degrees of freedom (DOF) and a US$8.1k parts cost. It combines two 7-DOF arms with 17-DOF hands, a pitching torso, a lift, a 3-DOF neck, and a holonomic base. Back-drivable arms and torso support compliant interaction, with fingertip reach from floor level to 2.23 m. The head and torso roughly triple modeled camera coverage relative to a torso-fixed camera. Apple Vision Pro head and hand tracking enables whole-body teleoperation without handheld controllers, with 137 ms mean glass-to-glass stereo video latency over the robot's Wi-Fi hotspot. We demonstrate an end-to-end imitation learning pipeline, from teleoperated data collection to policy deployment, using a shared command interface and whole-body controller.

0.30

PRISM: Precision and contact-rich Real-world Industrial Skill dataset with Multimodal sensing

cs.RO ·2026-08-18 ·Tengbo Yu, Jiahao Wu, Hanning Wang, Rui Chen, Chuanhou Liu +2 more
benchmarkdatasetcode/data similarity 0.58
Abstract

Recent progress in robotic learning has been fueled by large-scale datasets collected in everyday environments. However, most existing datasets emphasize short-horizon, low-contact tasks such as pick-and-place, and therefore do not capture the precision control, force/torque or tactile regulation, and multimodal feedback required for industrial assembly. To address this gap, we introduce PRISM, a large-scale multimodal dataset for contact-rich industrial operations. The dataset spans more than 25 manipulation tasks (e.g., electronic components plug/unplug, conveyor-based sorting) and covers diverse mechanical constraints. PRISM includes more than 5,000 trajectories totaling 45 hours of teleoperated demonstrations, recorded using synchronized multi-view RGB-D, force/torque, tactile, and robot-state measurements. In contrast to datasets collected in household or laboratory settings, PRISM provides a realistic benchmark for multimodal perception and control under high-precision industrial constraints, and serves as a foundation for contact-rich, generalizable manipulation in real-world manufacturing environments. The dataset is open-sourced at: https://tengbo-yu.github.io/PRISM/

0.33

A Multi-Modal Robotic Framework for Physical GUI Interaction Testing

cs.SE ·2026-10-30 ·Davi Freitas
top venue similarity 0.57
Abstract · 3 pages

Automated testing of mobile applications remains challenging when realistic user interactions must be reproduced and GUI behavior verified without relying on invasive mechanisms such as instrumentation or ADB-level control. Existing approaches, including DLD and R-DLD, detect data loss triggered by activity restarts but still depend on system-level access, which limits their applicability on real devices. This doctoral research proposes RFNIT, a multi-modal, fully non-invasive robotic framework for physical GUI interaction testing on smartphones. RFNIT supports end-to-end automation by perceiving the device state through external sensing and executing physical interactions, enabling human-like actions while preserving reproducibility and execution accuracy. The framework integrates a vision-based perception module, an LLM-driven reasoning agent, and a robotic actuator capable of performing touch, swipe, and typing gestures. Multimodal data, including external camera images and OCR-extracted text, are combined to identify GUI elements and guide subsequent testing decisions. Preliminary results indicate that RFNIT accurately recognizes buttons, text fields, and virtual keyboards from external camera input, achieving over 85\% visual detection accuracy. Ongoing and future work will focus on improving robustness, repeatability, and coverage of GUI states during long-running testing sessions.

0.47

RoboSpan: Learning Modular Coordination Policies for High-DoF Whole-Body Mobile Manipulation with Teleoperation

cs.RO ·2026-10-14 ·Keqiang Ren, Xuecheng Ye, Hanyu Liu, Zhihua Wang, Tao Jian +4 more
similarity 0.56
Abstract

Whole-body mobile manipulation suffers from two fundamental challenges: inherent motion heterogeneity across locomotion, arm, and hand modules, and progressive error accumulation over long-horizon multi-stage tasks. Existing teleoperation platforms also lack integrated dexterous tactile sensing to support coordinated whole-body decision-making. This paper presents RoboSpan, a high-DoF whole-body teleoperation and demonstration platform, and the Hierarchical Modular Framework (HMF) for learning modular coordination policies. HMF functionally decouples the 29-DoF action space into fine hand manipulation, arm pose adjustment, and mobile-base spatial configuration branches, and introduces the Coordinated Modular Embodied Transformer (COMET) with inter-modular cross-attention to enable dynamic information exchange and action coordination. Vision-language model driven hierarchical task decomposition structurally suppresses temporal error propagation, while a full-palm 2D tactile representation encodes distributed contact signals for cross-module tactile empowerment. Experiments on a physical 29-DoF robot demonstrate that the proposed method achieves over 20\% higher task success rate than mainstream baselines across a range of long-horizon whole-body tasks, markedly improving stability and robustness in contact-rich manipulation.

0.16

ToolDex: An Ego-Exo Human Demonstration Dataset for Creative Physical Tool Use

cs.RO cs.AI ·2026-11-06 ·Mohamed Elmoghany, Kehan Li, Ruoqu Chen, Tarun Chiruvolu, Shutong Zhang +9 more
benchmarkcode/data similarity 0.56
Abstract

Creative tool use is a fundamental human capability and an important step toward general-purpose embodied intelligence. It requires agents to reason about object affordances, physical constraints, and manipulation strategies, especially when standard tools are unavailable. However, progress in this area is limited by the lack of real-world datasets that capture human tool-use behavior with sufficient scale, fidelity, and diversity. Existing benchmarks are often simulation-based, focus on simplified interactions, or lack detailed observations and annotations. We introduce ToolDex, a large-scale egocentric-exocentric (ego-exo) human demonstration dataset for creative physical tool use. ToolDex captures scenarios in which humans select, adapt, and repurpose available objects as tools. Using synchronized egocentric cameras and eight exocentric cameras, the dataset provides high-fidelity multi-view observations and rich annotations for hands, tools, target objects, and their deformable interactions. Beyond data collection, we establish a benchmark suite characterizing three core capabilities: physical tool-use reasoning, sparse-view 3D and 4D reconstruction, and robot policy learning. ToolDex provides a foundation for studying human tool-use behavior and developing embodied agents that can adaptively use tools in complex real-world environments. Dataset visualizations and benchmarking results are available at https://tooluse-dataset.github.io/.

0.28

AI-Driven Collaborative Assembly Line Inspection: System Integration and Deployment Challenges

cs.RO cs.CVcs.HC ·2026-09-27 ·Asya Ünal, Amr Okasha, Ege Çırakman, Perin Ünal
published similarity 0.56
Abstract · 13 pages, 4 figures, 2 tables. Accepted at the 22nd International Conference on Mobile Web and Intelligent Information Systems (MobiWIS 2026…

Manual visual inspection on assembly lines is a persistent manufacturing bottleneck: operator fatigue over extended shifts lowers defect-detection rates. This paper presents the design, integration, and field deployment of an AI-assisted collaborative inspection cell at the Silverline kitchen-appliance factory, developed within the AI-PRISM project. The cell couples a Universal Robots UR 10e cobot carrying a machine-vision defect-detection pipeline with a Comau Racer-5 cobot for functional tests, coordinated through ROS 2 Humble on an Ubuntu 22.04 LTS server. Multi-modal data (Basler camera imagery, TIA microphone acoustics, and SPS electrical-safety measurements) are logged locally and visualised in real time with Grafana. We report the practical deployment challenges (close-proximity safety, AI robustness under glare and reflections, ROS 2 namespace collisions across two cobots, and operating-system and dependency issues) together with the engineering solutions adopted, and structure the integration through a four-level Human-Robot Interaction analysis. The deployed cell cuts per-unit quality-check time from 82 s to 61 s (about 25%), raises final-control resource efficiency from 0.75 to 0.88, reduces operator visual-inspection viewing time by 82%, and significantly lowers operator mental demand (p = 0.005, NASA-TLX).

0.30