CS Paper Radar

BiTSE: Binaural Target Speaker Extraction in Noisy Multi-Talker Environments for AR Glass Arrays

Selani A. Indrapala, Wageesha N. Manamperi

eess.AS ·submitted 2026-08-10 18:14 UTC · v1

Abstract

Isolating a desired speech signal in noisy multi-talker conversational scenarios is a key requirement for augmented reality (AR) wearable microphone array systems. In this work, a binaural target speaker extraction (TSE) framework, termed BiTSE, is proposed. It leverages both spatial and temporal cues, specifically the direction-of-arrival (DoA) of the target speaker and corresponding voice activity information, to guide the extraction process. Built upon a binaural signal denoising architecture, our model integrates three key enhancements: (i) a DoA-aware attention mechanism using cyclic positional embeddings, (ii) a timestamp-based masking strategy that utilizes speaker activity to suppress non-target segments, and (iii) a novel two-stage loss optimization strategy that first trains the model for robust denoising and then fine-tunes it to improve perceptual quality. Evaluations on the SPeech Enhancement for Augmented Reality (SPEAR) challenge dataset demonstrate that the proposed BiTSE consistently improves upon conventional approaches, leading to enhanced signal fidelity and perceptual quality.

Comment
This is the preprint version of the paper accepted at APSIPA ASC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Separate First, Then Associate: A Two-Stage Approach for Real-World Audio-Visual Speech Enhancement

eess.AS ·2026-08-14 ·Tongtao Ling, Zhong-Qiu Wang
similarity 0.69
Abstract

Audio-visual speech enhancement (AVSE) aims at extracting target speech from multi-speaker mixtures by exploiting visual cues. Although recent studies have reported strong performance on simulated datasets, the performance, however, often drops dramatically when they are applied to real-world audio-visual recordings. To bridge this gap, the Real-World AVSE Challenge held in the ISCSLP 2026 conference calls for participants to design a practical solution for AVSE under real-world conditions, where speaker overlap, acoustic interferences, room reverberation and visual degradations naturally co-exist. In our submission to the challenge, we propose a decoupled separation-then-association approach. It consists of two stages: a separation stage in which a trained, audio-only model (i.e., not using visual cues) is used to separate input multi-speaker mixture to individual speaker signals, followed by an association stage, where an audio-visual CLIP model is used to identify the separated speech signal with the highest similarity with the target speaker's facial video via cross-modal similarity matching. Evaluation results on the challenge dataset show the effectiveness of our proposed approach.

0.04

Adapting Personalized Speech Enhancement for Low-Latency Audio-Visual Target-Speaker Extraction

eess.AS cs.CVcs.SD ·2026-09-24 ·Rayhan Rashed, Senja Filipi, Ross Cutler
hot direction similarity 0.69
Abstract

Online audio-visual target-speaker extraction aims to remove competing voices while preserving speech quality and bounding lookahead. Existing extractors are built and evaluated for separation on synthetic mixtures, leaving listening quality and meeting behavior largely untested. We introduce Audio-Visual Personalized Voice Quality Enhancement (AV-PVQE), which approaches these requirements from the other direction. We start from a personalized speech enhancement model that reconstructs a requested voice at high quality but confuses the target in 46% of two-speaker mixtures despite clean enrollment. Adding mouth features at its speaker-conditioning input and jointly fine-tuning the visual and reconstruction networks reduces this rate to 1.6%, with no future frames and 20 ms of algorithmic delay. Compared with an online autoregressive audio-visual extractor, AV-PVQE yields separation gains on two synthetic benchmarks and larger gains on recorded meetings, and keeps its advantage on excerpts with more speakers than the fine-tuning mixtures. In personalized P.835 listening tests on two meeting corpora, it improves overall quality over this extractor by 0.57 and 0.63 MOS, with similar mean rating relative to the starting model. Preservation and rejection tests show that it keeps the target intact when no competing voice is present and suppresses competing speech when the target is absent.

0.21

Microphone Geometry Aware Regional Target Speaker Extraction

cs.SD cs.AIeess.AS ·2026-10-31 ·Shitong Xu, Niki Trigoni, Andrew Markham
similarity 0.67
Abstract · 7 pages, 2 tables, 2 figures

Regional target speaker extraction (RSE) aims to extract speech originating from a specified angular region, relaxing the requirement for precise target speaker location when performing location based speech extraction. However, existing RSE methods typically assume a fixed microphone array configuration and microphone number, limiting their applicability to unseen microphone geometries and varying numbers of microphones. In this work, we propose a geometry-aware RSE framework capable of extract with varying microphone array geometry and microphone numbers. Specifically, we introduce an attention-based multichannel front-end to encode inter-microphone phase information, together with a spatial audio reconstruction-based auxiliary objective to improve the front-end spatial representations quality. Experimental results demonstrate that the proposed framework improves SI-SDRi by 5.1 dB over geometry-aware baselines across microphone arrays with four-microphones, while maintaining a performance gap of less than 0.6 dB compared with a tetrahedral geometry-specific baseline when evaluated on the tetrahedral microphone array.

0.22

Geometry-Conditioned Target Speaker Extraction based on spatial features incorporating acoustic propagation principles

eess.AS ·2026-10-21 ·Jiatong Li, Simon Doclo
similarity 0.67
Abstract

Recently, spatially selective non-linear filter (SSF) was proposed for target speaker extraction, utilizing the direction-of-arrival (DOA) of the target speaker as a spatial cue. To overcome its dependency on a fixed microphone array geometry, geometry-conditioned SSF (GCSSF) was proposed, which maps the target DOA and the microphone positions into abstract high-dimensional embeddings using positional encoding. As an alternative to these high-dimensional embeddings, in this paper we propose utilizing two spatial features incorporating acoustic propagation principles for geometry conditioning: 1) the steering vector of the target speaker, which captures inter-microphone phase differences, and 2) a spatial mask based on GCC-PHAT, which quantifies presence of the target speaker per time-frequency bin. These features are used as input to a geometry-conditioning encoder and integrated via a FiLM layer into the GCSSF system. Experimental results on circular and random arrays demonstrate that conditioning with spatial features improves target extraction performance compared to abstract high-dimensional embeddings, maintaining a clear performance advantage across a wide range of target DOA errors.

0.19

CF-AVSS: A Coarse-to-Fine Audio-Visual Speech Separation Framework with Target-Speaker Refinement and Post-Fusion for Real-World AVSE Challenge

cs.SD cs.AI ·2026-10-15 ·Longjie Luo, Zhongshu Hou, Yuepeng Li, Gang Yang, Shidong Shang +1 more
published similarity 0.67
Abstract · Accepted by ISCSLP 2026

Audio-visual speech enhancement (AVSE) leverages visual cues to recover target speech from mixtures corrupted by reverberation, noise, and overlapping speakers. We propose a coarse-to-fine two-stage AVSE framework. In the first stage, a progressive SPAV-TFGridNet is extended to two synchronized visual streams to produce visually ordered coarse estimates by progressively suppressing interfering speech while preserving target reverberation and shared background noise. In the second stage, a TFGridNet-based target speaker refinement network takes the original mixture and both coarse estimates as input to further recover target speech and improve signal quality. The coarse and refined estimates are finally combined using development-set-calibrated fusion. On the ISCSLP 2026 Real-World AVSE Challenge, our system tied for first place on Track 1 and ranked second on Track 2 in OVRL, while achieving the lowest CER on both tracks at 12.31% and 14.79%, respectively.

0.14

Neural Field-of-View for Binaural Signal Matching with Wearable Microphone Arrays

eess.AS ·2026-09-23 ·Matan Yifrach, Boaz Rafaely
similarity 0.67
Abstract

The growing use of spatial audio in applications such as augmented and virtual reality has driven the development of binaural reproduction methods for wearable arrays with a limited number of microphones. Binaural signal matching (BSM) is one such method, producing high-quality binaural signals under a diffuse-field assumption, but degrading at high direct-to-reverberant ratios (DRR) where the direct sound dominates. Previous extensions incorporate Field-of-View (FoV) weighting, either with fixed apertures or based on explicit source localization, but these approaches are limited by coarse spatial coverage or reliance on localization estimation accuracy. This paper introduces FoV-BSM-Net, a signal-dependent FoV-BSM formulation that avoids explicit source estimation by learning the FoV parameters end-to-end from the microphone signals using a Convolutional Recurrent Neural Network. The method is evaluated in simulated rooms across varying reverberation conditions, and compared against BSM and a fixed FoV-BSM baseline. Results show that FoV-BSM-Net consistently improves over BSM, with gains that grow with DRR in both binaural NMSE and interaural cue errors, and are further supported by perceptual evaluation showing a substantial advantage over both baselines across low and high DRR conditions.

0.26

SPATEX: Array-Flexible Multichannel-to-Multichannel Target Speech Extraction using Direction Clue

eess.AS ·2026-11-02 ·Wen Wen, Changda Chen, Yu Xi, Haoyu Li, Qiang Zhou +5 more
code/data similarity 0.66
Abstract · Submitted to ICASSP 2027

Multichannel-to-multichannel target speech extraction (MIMO TSE) aims to recover the target speech signal at each microphone while preserving interchannel spatial information. However, existing MIMO TSE systems generally assume a fixed microphone configuration, limiting their applicability to recording devices with varying microphone configurations. In this work, we propose SPATEX, the first array-flexible MIMO TSE framework that reconstructs microphone-wise target speech signals across microphone counts and array geometries. Given microphone coordinates and a target direction-of-arrival (DOA), SPATEX combines geometry-aware channel exchange and shared temporal attention to jointly reconstruct microphone-wise target signals while maintaining permutation equivariance. Experiments show that SPATEX outperforms array-flexible single-output baselines under most test conditions and consistently improves extraction quality and spatial fidelity over fixed-array MIMO baselines. Ablation studies further validate the benefits of temporal coordination and spatial supervision, while additional evaluations demonstrate robustness to target DOA errors. Our code and dataset are available at https://github.com/Wenanzhi/SPATEX.

0.33

The SLT 2026 SmartGlasses Challenge: Benchmarking Egocentric Multi-Talker Speech Recognition and Understanding with Audio-Language Models

eess.AS cs.SD ·2026-08-12 ·Dehui Gao, Zhixian Zhao, Zhennan Lin, Yujie Liao, Yuhang Dai +12 more
similarity 0.66
Abstract · 7 pages, 7 figures

Recent advances in large language models (LLMs) and multimodal LLMs (MLLMs) have created new opportunities for wearable speech interfaces, with smart glasses providing an egocentric platform for continuous audio sensing and assistance. However, speech recognition and understanding in this setting remain challenging because of dynamic acoustic conditions, speaker overlap, and the spatial ambiguity introduced by wearer-centered recording geometry. To support systematic evaluation in this setting, we introduce the IEEE SLT 2026 SmartGlasses Challenge for egocentric multi-speaker speech processing. The challenge consists of two tracks, Dyadic Dialogue Understanding and Multi-party Meeting Understanding, and jointly evaluates Time-Stamped Speaker-Attributed Automatic Speech Recognition (TSA-ASR) and Spoken Language Understanding (SLU). It is built on a 106-hour four-channel egocentric speech dataset containing 714 sessions collected in real-world scenarios. This paper describes challenge tasks, dataset construction, submissions, and summarizes the main findings from the shared evaluation. The results show that heavy speaker overlap remains a major factor affecting TSA-ASR performance, while paralinguistic acoustic understanding continues to be difficult for current audio-language models in complex SLU settings. Further details can be found on the official challenge website.

0.38