CS Paper Radar

Stream Decoding with Confidence Scores at Room and Cryogenic Temperatures

Maries Tahaab, Tim Chan, James Kirkman, Simon C. Benjamin

cs.DC quant-ph ·submitted 2026-08-11 07:01 UTC · v1

Abstract

In fault-tolerant quantum computing, fast and accurate decoding is crucial. Snowflake is a decoder for the surface code that runs in a streaming fashion. In this paper, we implement Snowflake on commercial FPGAs and validate them at room and cryogenic temperatures. Our results demonstrate high decoding throughput for small code distances that, when extrapolated, remains within acceptable limits for larger distances. Further, we incorporate the calculation of certain decoder confidence scores with negligible overhead both in terms of latency and physical resource utilisation. We note that implementing a large-scale system would require either a large FPGA beyond today's technology or clusters of FPGAs connected via a high-speed bus. Thus, we discuss an alternative architecture that exploits the locality of Snowflake by processing 2D slices of the 3D decoding window and offloading segments of the 3D structure to a high-speed memory.

Comment
12+5 pages, 10+4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Scaling classical hardware for accurate real-time quantum error correction

cs.AR quant-phcs.LG ·2026-11-19 ·Chenyang Jin, Susanne F. Yelin, Andi Gu
similarity 0.78
Abstract · 13 pages, 5 figures, 4 Extended Data figures, 1 Extended Data table

Fault-tolerant quantum computation requires a classical decoder fast enough to process syndrome measurements at the rate at which they are generated, and to return its decisions with low latency. This is most demanding for superconducting processors, whose fast syndrome cycles force a trade-off between decoding speed and accuracy. Decoders fast enough to keep up sacrifice accuracy, which must be compensated for with larger codes and thus additional physical qubits. Here we introduce Rapids, a streaming neural decoder that is both fast and accurate. We achieve this by co-designing the decoder with a field-programmable gate array (FPGA): the network is built from operations that map cheaply onto the device and trained in its integer arithmetic. For the distance-19 surface code, Rapids decodes each round of syndromes in under a microsecond on a single FPGA, fast enough for superconducting processors, and returns its decisions with the low latency that fault-tolerant algorithms require. Its logical error rate is 240 times lower than that of existing real-time hardware decoders. The same design extends to the color code and the [[144,12,12]] bivariate-bicycle code, on which our decoder is 16 times more accurate than the real-time Relay decoder. We further show that the decoder scales: spread over several FPGAs or hardened into custom silicon, it becomes faster, more accurate, or able to decode larger codes. Classical hardware thus becomes a further resource, alongside qubits, that can be scaled to improve fault-tolerant quantum computers.

0.19

Architecting Instruction Execution for Scalable Fault-Tolerant Quantum Computing

cs.ET quant-ph ·2026-10-12 ·Dmitry Filippov, Justin Hogaboam, Mathias Soeken, Raghu Gatta, Prakash Murali +1 more
published similarity 0.71
Abstract · Published in IISWC 2026

Scaling fault-tolerant quantum computing (FTQC) requires orchestrating millions of operations continuously across a tightly coupled classical-quantum control stack. A critical challenge in this orchestration is determining the optimal hardware-software boundary, i.e., the Quantum Instruction Set Architecture (QISA). We focus on cryogenic, fixed-connectivity qubit platforms, such as superconducting and topological Majorana qubits. For these, existing QISA choices either operate at too low a level, violating cryogenic thermal budgets at scale, or at too high a level, imposing unrealizable complexity on the control engine. To reason about these tradeoffs, we introduce the ARIES instruction set hierarchy, which categorizes QISAs into distinct abstraction levels. To systematically evaluate these levels, we develop an end-to-end evaluation toolflow featuring a cycle-accurate classical driver and hardware engine simulator. Using eight quantum applications across superconducting and topological qubit platforms, we measure instruction bandwidth, transceiver power dissipation, and measurement processing overheads. We demonstrate that while physical-level abstractions exceed the thermal limits of dilution refrigerators by orders of magnitude, canonical-level abstractions significantly underestimate hardware routing congestion and execution runtimes. Our Level 4 QISA (local logical operations) offers an optimal architectural balance. As quantum hardware platforms scale toward FTQC in the coming years, our findings provide concrete architectural guidance for the design of their classical control stacks and instruction interfaces.

0.24

Hierarchical Decoding for Quantum Error Correction

cs.ET quant-ph ·2026-11-12 ·Xulong Tang, Narges Alavisamani, Joan Camps, Matthew Cha, Elise Jennings +16 more
similarity 0.69
Abstract

Fault-tolerant quantum computing requires classical decoders that can keep up with syndrome data streams and supply correction information and logical measurement outcomes to the quantum control system. Meeting these requirements at scale requires high throughput while controlling the end-to-end latency from readout to usable correction. In this paper, we organize decoding algorithms, execution strategies, and code constructions using common classifications and examine their performance and trade-offs under the reported evaluation conditions. We distinguish decoder-level hierarchy, where multiple decoding stages or resources cooperate to decode a single code, from code-level hierarchy, where the code construction itself introduces multiple decoding levels. We first review single-code hierarchical decoders and their cascaded predecoding and windowed, streaming, and distributed implementations. We then study hierarchical and concatenated codes, focusing on how decoding is coordinated across code levels through hard decisions, soft reliability information, or syndrome information. We also examine how qubit modalities shape decoding workloads and timing requirements, and review how different decoding platforms meet these requirements, including central processing units (CPUs), graphics processing units (GPUs), field-programmable gate arrays (FPGAs), application-specific integrated circuits (ASICs), and cryogenic platforms. By assessing design trade-offs, this paper clarifies connections across the literature and provides a shared foundation for QEC design exploration. It also identifies gaps in performance reporting and system integration to guide future research toward practical quantum error correction.

0.14

Do Not Let CNOTs Overwhelm the Decoder: Scheduling Transversal Gates for Fast FTQC

cs.AR quant-ph ·2026-08-12 ·Shota Ikari, Yuga Hirai, Yasunari Suzuki, Hiroshi Nakamura, Yosuke Ueno
similarity 0.68
Abstract · 16 pages, 18 figures, 3 tables

Transversal CNOT (TCNOT) gates can accelerate fault-tolerant quantum computation (FTQC) in the surface code by reducing the number of syndrome extraction rounds required between logical operations from $O(d)$ to $O(1)$. This is particularly attractive for quantum platforms with long-range connectivity, such as neutral atoms. However, dense TCNOT schedules substantially increase the classical decoding workload. TCNOTs propagate errors across multiple surface-code patches, enlarging the spatiotemporal region that must be decoded jointly. Consequently, denser TCNOT schedules increase decoding latency and memory requirements and potentially exceed available decoder capacity. Moreover, because the detector error model (DEM) of each decoding window depends on the TCNOT schedule, exhaustively precomputing all possible window-level DEMs is infeasible, requiring just-in-time (JIT) DEM compilation. Thus, the practical benefit of TCNOT gates is limited not only by quantum hardware performance but also by classical decoding and DEM-compilation capacity. We introduce PACE, a decoder-aware scheduling framework for TCNOT-based FTQC. PACE first mitigates the decoder-side costs of aggressive TCNOT scheduling through three complementary techniques. Hybrid Window Decoding assigns different decoders for each decoding window according to its DEM structure. DEM Stitch generates schedule-specific window-level DEMs just in time by assembling reusable precompiled fragments. Sub-window Parallel Decoding decomposes large windows into smaller sub-windows with graph-coloring formulation. Building on these techniques, PACE then performs decoder-aware scheduling to maximize TCNOT concurrency within the available decoder resources. Our evaluation shows the trade-off between quantum acceleration and classical decoding cost, revealing the limitations of current decoding systems for TCNOT-based FTQC.

0.10

MagiCFirm: A Runtime for Magic-State Cultivation with Algorithm-Hardware Co-Design

cs.AR quant-phcs.DC ·2026-09-24 ·Jubo Xu, Abbas B. Ziad, Prakash Murali, Hongxiang Fan
code/data similarity 0.68
Abstract

Magic-state cultivation offers a promising alternative for lowering the cost of non-Clifford operations in fault-tolerant quantum computing (FTQC). However, realizing cultivation in practice exposes two challenges: (i) the lack of an open-source classical runtime layer between logical software and physical control, and (ii) the latency constraints on protocol-specific decisions that determine magic-state readiness. To address these challenges, we adopt an algorithm--hardware co-design approach. At the algorithm level, we develop a two-stage early-escape scheme that identifies an informative subset of detectors offline, constructs a compact decoding problem, and performs partial decoding in parallel with complete decoding at runtime, allowing high-confidence attempts to advance before full decoding completes. At the hardware level, we present MagiCFirm, a configurable runtime that combines offline-compiled microprograms with dedicated datapaths for detector construction, event processing, and protocol control, enabling end-to-end execution of magic-state cultivation. Across evaluated configurations, MagiCFirm reduces wall-clock magic-state preparation time by up to 39.3% at matched logical error rate. For a representative magic-state-bound workload, this translates to an estimated 11% reduction in overall application runtime.

0.20

Python in the front, party in the Backline: compiling quantum workloads across CPUs, GPUs, and FPGAs

cs.DC quant-phcs.PL ·2026-09-08 ·Joseph K. L. Lee, Mehrdad Malekmohammadi, Hong-Sheng Zheng, Shuli Shu, Cheick Doumbia +8 more
similarity 0.67
Abstract

Moving from quantum research and development to production-grade, fault-tolerant quantum workload execution remains one of the most significant challenges facing quantum platform builders. While Python frameworks have enabled an easy entry point for quantum algorithm design, the low-latency requirements for real-time quantum error correction (QEC) demand performance that traditional interpreted environments cannot provide. FPGAs and ASICs play a central role at these layers, but their specialized programming models make development rigid and time-consuming. CPUs, GPUs, and other accelerators introduce a different challenge: as infrastructure becomes increasingly heterogeneous, programming across different devices and their associated abstractions becomes more complex. Allowing researchers to write workloads in high-level languages that map to low-latency execution across diverse distributed target platforms will enable the development of key infrastructure for utility-scale quantum systems. For this, we introduce $\textit{Backline}$, a heterogeneous compilation and runtime framework built within PennyLane and Catalyst. Backline allows us to design and build quantum-classical workloads for high-performance and low-latency devices, with compilation directly from a Python interface through MLIR. We demonstrate the compilation and execution of several quantum workloads with low-latency data movement across a mix of CPUs, GPUs, and FPGAs, for both local and distributed remote hardware targets, all from a vendor-agnostic Python frontend. With an AMD VPK120 FPGA board as the controller, issuing each round from its hardware-handshake engine, we measured median steady-state round-trip latencies over RoCE v2 of $2.305~μ$s to an AMD Ryzen Threadripper PRO CPU and $4.5~μ$s to an AMD Instinct MI210 GPU across $10^6-1$ rounds per path, demonstrating microsecond-scale synchronous co-processing.

0.41

Machine-learning decoders for fusion-based quantum computing in real time

cs.AR quant-phcs.LG ·2026-11-10 ·Daniel Barter, Jacob C. Bridgeman, Chris Dawson, Terry Farrelly, Shane Fleming +10 more
benchmark similarity 0.67
Abstract · 22+21 pages, 20 figures, 4 tables, comments welcome

Fault-tolerant quantum computation requires decoders that combine accuracy, throughput, low latency, and scalability to large numbers of physical qubits. In photonic fusion-based architectures, erasures from photon loss and probabilistic fusion measurements are a dominant error mechanism, motivating decoders that remain accurate at high erasure rates. We introduce PRISM, a transformer-based machine-learning decoder designed to exploit the known locations of erasures in protocols subject to both Pauli and erasure errors. We benchmark PRISM across a wide range of fault-tolerant protocols based on surface codes, color codes, and quantum low-density parity-check codes, with distances up to 24. Across these benchmarks, PRISM matches the logical error rates of integer-programming-based decoders while being significantly faster, including at error rates up to 50% of threshold. We further optimize the decoder and its real-time hardware implementation to reduce latency while maintaining accuracy. Our optimized implementation on an AMD VP1902 FPGA can decode logical blocks of distance 8 in both space and time, demonstrating a latency of 6.59 microseconds and an amortized decoding time of 1.56 microseconds per logical block is possible. These results show that machine-learning decoding can provide accurate, low-latency inference for erasure-dominated fault-tolerant quantum architectures.

0.15

Benchmarking StreamNTT with a Verilog-to-Routing Toolchain

cs.AR ·2026-09-19 ·Wei He, Young-kyu Choi, Hyunwoo Park, Sunwoong Kim
code/data similarity 0.66
Abstract · Accepted to the 2nd Workshop on Domain-Specialized FPGAs (WDSFPGA), co-located with ISFPGA 2026

As post-quantum cryptography algorithms move toward large-scale data center deployment, hardware acceleration of their computational bottleneck, which is the number theoretic transform (NTT), has gained increasing attention. StreamNTT, a high-level synthesis- and field-programmable gate array-based accelerator, achieves state-of-the-art throughput through various optimization techniques. However, its reliance on a commercial tool and a device makes direct comparisons difficult for researchers without access. We address this by building StreamNTT on an open-source Verilog-to-Routing toolchain, which achieves similar digital signal processing and multiplier usage. Significant differences in internal memory utilization indicate that further memory-level optimization is needed to approach commercial tool performance.

0.32