CS Paper Radar

Self-Geometry: GT-Free and Plug-and-Play Test-Time Adaptation for Geometrically Consistent 3D Vision Foundation Models

Seokhyun Youn, Dahyeon Kye, Sung-Ho Bae, Jihyong Oh

cs.CV ·submitted 2026-08-11 09:28 UTC · v2
code/data

Abstract

Recent Vision Foundation Models (VFMs) predict depth, camera pose, and pointmap in a single forward pass without per-scene optimization, achieving strong generalization. However, enforcing explicit multi-view geometric consistency, e.g., through bundle adjustment, is computationally costly and is thus not imposed during VFM pretraining, so such inconsistency can arise. To address this, implicit self-consistency derived from model outputs (e.g., pointmaps, features), though enforced at test-time in prior work, delivers inherently limited performance gain, especially on scenes where the pretrained VFM is highly inaccurate. In contrast to this implicit signal, we propose Self-Geometry, a plug-and-play test-time adaptation pipeline that directly imposes explicit multi-view geometric constraints using 2D pixel correspondences as pseudo ground-truth. Our proposed Self-Geometry consists of Geometric Disentanglement Optimization, which combines Multi-View Consistency and Epipolar Consistency losses with Gradient Disentanglement to prevent gradient conflict; Frame Angular-Neighbor, a view sampler based on SO(3) geodesic distances for lightly imposing these constraints; and Lightweight TTA, which adapts VFMs via LoRA. Our method achieves consistent improvements in both pose and geometry estimation across six VFMs (VGGT, $π^3$, DA3-Giant/Large/Base/Small) and four benchmarks (7Scenes, ETH3D, ScanNet++, HiRoom).

Comment
Project page: https://cmlab-korea.github.io/Self-Geometry/

Closest papers

Nearest neighbours by meaning across the whole index.

IntriAdapt: Generalizable Intrinsic-Guided Test-Time Adaptation for Metric Geometry Estimation

cs.CV ·2026-10-17 ·Jiaxing Chen, Zizheng Yan, Jingyu Zhuang, Jinwei Chen, Shuguang Cui +2 more
similarity 0.79
Abstract

Recovering metric 3D geometry from images is fundamentally ill-posed due to perspective projection ambiguity. Current geometry models incorporate supplied or predicted intrinsics during inference, but do not use them to supervise model adaptation. To refine these predictions, test-time adaptation (TTA) typically relies on external depth measurements. In this paper, we instead use camera intrinsics as an output-side geometric verifier. Comparing the point cloud's viewing rays with those defined by the known intrinsics yields a direct measure of geometric inconsistency. We propose \textit{IntriAdapt}, a TTA framework that minimizes this closed-form geometric residual. By optimizing a lightweight LoRA adapter on a frozen geometry foundation model, our method aligns the prediction with the specific camera model without depth sensors or external priors. We further extend this approach to video sequences, demonstrating that adapting a short sequence generalizes to other sequences captured by the same camera. The adapted model processes held-out images in a feed-forward pass, without repeating optimization for each frame. Experiments on ten single-image and seven sequence benchmarks across multiple base models show that \textit{IntriAdapt} consistently outperforms both unadapted and oracle-intrinsics baselines in metric accuracy and relative geometry.

0.12

SURE-Map: Self-Correcting Streaming Geometric Foundation Models

cs.CV ·2026-09-14 ·Mingkai Liu, Hao Zhao, Xingxing Zuo
positioncode/data similarity 0.74
Abstract · Corrected a typo in the title; manuscript content unchanged

Streaming geometric foundation models are emerging as a compelling alternative to SLAM systems. Yet this streaming nature introduces a fundamental issue: each prediction is made from limited context, which is vulnerable to dynamic objects and weak textures. Small local errors accumulate into severe geometric distortion and long-horizon scale drift. We argue that reliable streaming reconstruction requires geometric foundation models to be not only predictive, but also self-correcting. We introduce SURE-Map, a self-correcting framework built upon two complementary principles. First, we explicitly model cross-view geometric uncertainty. Unlike conventional depth or point confidence, which primarily reflects the reliability of individual-view prediction, our uncertainty directly measures whether the jointly predicted pose and depth induce geometrically consistent cross-view pixel correspondences. Second, because local correction alone cannot eliminate slowly accumulating scale errors, we introduce multi-timescale self-correction: fast consecutive-frame inference preserves streaming efficiency, while sparse keyframe-window inference provides longer-range geometric evidence to periodically recalibrate the scale of recent trajectories. SURE-Map establishes new state-of-the-art performance for online feed-forward reconstruction across long-horizon benchmarks, reducing ATE-RMSE from 24.00 to 17.24 m on KITTI, 5.11 to 4.74 m on Oxford Spires, and 31.37 to 28.58 m on VBR, with further improvements to 15.17, 4.63, and 22.12 m when incorporating loop-closure refinement. Project page: https://mingkai-liu.github.io/projects/sure-map/.

0.52

Rethinking Asymmetry in Self-Supervised 3D Geometry Learning

cs.CV ·2026-10-30 ·Gyeongjin Kang, Freeman Cheng, Botao Ye, Weijie Lyu, Ming-Hsuan Yang +1 more
similarity 0.73
Abstract · Website: https://gynjn.github.io/rethinking-asymmetry/

Self-supervised learning relies on asymmetry between what a model observes and what it must explain. Recent methods learn 3D geometry from unposed images by predicting cameras and scene structure, then rendering held-out views. To avoid trivial solutions, they impose this asymmetry in the input space, restricting how views interact through separate branches or masked attention. We revisit this design with geometric accuracy, rather than rendering quality, as the main objective. When a held-out view lies between context views, the context already constrains the geometry it observes. We therefore impose the asymmetry in the 3D representation space, excluding held-out views only from the reconstructed scene while a shared backbone uses all views for correspondence. This improves depth and pose estimation over input-space designs. We further exploit view density: sparse and dense observations depict the same scene but provide different amounts of correspondence. Aligning sparse-context features with dense-context features supplies a geometric training signal alongside rendering, without a pretrained geometric teacher. We additionally align features with a frozen vision foundation model, which brings further gains. None of these signals requires geometric annotation, and the resulting model improves geometry estimation over prior self-supervised methods. Controlled experiments isolate the contribution of each component, and self-supervised pretraining also improves subsequent supervised training.

0.16

Geometry-Grounded Unified 3D Perception for Autonomous Driving

cs.CV ·2026-08-13 ·Longfei Xu, Xiaohui Wang, Zehao Huang, Han Li, Ya Yang +2 more
published similarity 0.72
Abstract · Accepted by BMVC 2026

Camera-based autonomous driving perception requires a shared representation that preserves metric 3D structure across synchronized multi-camera streams. However, existing image-based frameworks often rely on backbones pretrained for semantic recognition, and introduce 3D geometry through downstream task-specific modules. As a result, their shared representations may fail to preserve explicit metric geometry and consistent 3D scene structure. In this paper, we present a Geometry-grounded Unified 3D Perception (GeoUP) framework that adapts the reconstruction-oriented latent of VGGT to calibrated, streaming multi-camera driving scenes. GeoUP factorizes cross-image interaction into self, temporal, and view attention to capture structurally distinct temporal and cross-view correspondences. It further injects calibration-aware raymap encodings to provide metric scale and camera geometry. The resulting geometry-grounded latent is decoded for metric depth estimation, 3D object detection, and semantic occupancy prediction, corresponding to surface-, instance-, and volume-level readouts of the same 3D scene. Through joint multi-task and multi-dataset training, GeoUP effectively leverages heterogeneous annotations and generalizes across diverse sensor configurations and perception ranges. Extensive experiments on nuScenes, Argoverse 2, Waymo, KITTI, and DDAD demonstrate that GeoUP achieves SOTA performance across detection, occupancy, and depth estimation. These results validate the effectiveness of geometry-grounded representations for unified 3D driving perception.

0.64

GeoWeaver: Accurate Long-Sequence 3D Reconstruction via Hierarchical Geometric Assembly

cs.CV ·2026-08-18 ·Tinghao Jiang, Sheng Tang, Shengzhe Wei, Juntong Fang, Weiqi Zhang +2 more
code/data similarity 0.72
Abstract · 15 pages, including supplementary material; 7 figures and 10 tables. Project page: https://kosmoresearch.github.io/GeoWeaver/

Long-sequence 3D reconstruction from RGB videos requires both accurate local geometry and globally consistent camera motion. Feed-forward models provide strong depth and pose predictions, but their memory cost prevents joint inference over long sequences. Chunk-wise processing improves scalability, yet independently predicted chunks often exhibit scale drift, pose errors, and point-cloud misalignment. We present GeoWeaver, a unified framework comprising a Geometric Prior Model (GPM) and Test-Time Adaptation (TTA). The GPM predicts chunk-wise depth, confidence, and camera parameters as adjustable geometric priors. TTA then performs sequential initialization, global chunk-level Sim(3) alignment, and coarse-to-fine refinement of camera poses, affine depth corrections, and intrinsics. Dense correspondences provide adjacent, cross-chunk, and long-range constraints, while a robust CDF-style objective jointly optimizes weighted 2D reprojection and 3D consistency residuals. This design preserves local geometric accuracy while correcting accumulated pose, scale, depth, and calibration errors. Experiments across diverse long-sequence benchmarks demonstrate improved camera accuracy, global consistency, and point-cloud quality. Ablations verify the contribution of each adaptation stage, and applying the same TTA procedure to different geometric prior models consistently improves their trajectory estimates, demonstrating that GeoWeaver is not tied to a specific GPM.

0.32

Depth Anyviewpoint? Evaluating Monocular Depth Over Viewpoint Sequences

cs.CV ·2026-11-01 ·Theo Rode, Rui Zhang, Ryan Aubrey, Olivia Li, Jessica Huang +3 more
similarity 0.71
Abstract

Monocular depth estimation aims to predict depth maps from single RGB images (forgoing the need for stereo camera pairs) and has seen impressive leaps in performance in recent work due to the introduction of affine-invariant losses and the use of foundation model features. These monocular depth models predict affine-invariant depth, which describes the relative positions of objects in the scene instead of absolute depth. While these models demonstrate strong performance on single image benchmarks and qualitatively consistent predictions in video, their effectiveness at preserving consistent spatial structure has been less thoroughly explored. Many potential real-world applications, such as handling video streams as input, rely on coherent three dimensional consistency in scenes. Further, anchoring relative depth predictions to a metric reference for a given scene is a key challenge for applying monocular depth models to real-world situations. We develop a novel evaluation protocol for monocular depth models using video sequences with moving camera positions to test the consistency of prediction across variation in viewpoint. We demonstrate this methodology over diverse, real-world video sequences where we are able to anchor depth model output to metric depth values using structure from motion. Our work demonstrates open challenges in the development of broadly applicable monocular depth foundation models, particularly with their ability to provide temporal consistency over long time frames. We also identify challenges in the straightforward adoption of structure-from-motion as a metric grounding tool for monocular depth estimation models.

0.14

VGGT-CAD: Reconstructing Parametric CAD 3D Model with Geometric Grounding

cs.CV ·2026-09-18 ·Chunan Yu, Tianrun Chen, Fu Shen, Cheng Chen, Lanyun Zhu +1 more
benchmark similarity 0.71
Abstract

Parametric CAD reconstruction requires recovering both precise geometry and editable modeling operations from visual observations, making it challenging under limited and ambiguous views. Existing methods mainly rely on 2D appearance cues and lack strong multi-view geometric priors. In this work, we present VGGT-CAD, a geometry-aware framework for parametric CAD reconstruction from single- and multi-view observations. We transfer pretrained 3D geometric priors into CAD reconstruction by encoding camera parameters as condition tokens and jointly modeling them with image tokens. To handle varying numbers of viewpoints, we introduce a variable-view cross-view context aggregation module that adaptively fuses multi-view features. We further develop a training-free geometry-aware view selection strategy to select complementary and reliable frames during inference. The resulting representation is decoded into CAD command sequences using a non-autoregressive decoder. We also develop VideoCAD, a large-scale multi-view video benchmark derived from existing CAD data through multi-view re-rendering. Extensive experiments demonstrate the effectiveness of VGGT-CAD for visual CAD reconstruction under different observation configurations.

0.42

GenIA: Generative Reconstruction with Test-Time Input Alignment

cs.CV ·2026-10-08 ·Stefano Esposito, Naama Pearl, Polina Karpikova, Samuel Rota Bulò, Lorenzo Porzi +3 more
code/data similarity 0.71
Abstract

Reconstructing complete 3D object assets from monocular or sparse multi-view observations remains challenging. Generative 3D foundation models can complete object geometry beyond the observed views, but their predictions may not faithfully reproduce the observed geometry, appearance, or pose. We introduce GenIA, a framework for test-time input-aligned generation that grounds SAM3D's generative prior in geometric and photometric observations without retraining the foundation model. We improve object pose by deriving translation and scale from geometry while retaining the learned rotation prior, and align appearance through visibility-biased attention, cross-observation fusion, and differentiable rendering guidance during denoising. An optional post-denoising refinement further adapts the appearance latent, lightweight decoder adapters, and object placement to the observations. Our framework also supports externally supplied geometry; when given temporal shapes of dynamic objects, it recovers a shared, input-aligned canonical appearance and stable world-space placement. Across synthetic and real benchmarks, GenIA improves pose prediction and object reconstruction from monocular, multi-view, and dynamic inputs, outperforming recent optimization-based, per-frame image-to-3D, and video-to-4D methods. Our project page is available at https://facebookresearch.github.io/GenIA.

0.26