CS Paper Radar

KOOPMAN-Luenberger Observer Design for Nonlinear Systems with Application to the Monitoring of a Latent Thermal Energy Storage

Mustapha Habib, Dario Aguiar, Esther Kieseritzky, Tilman Barz, Qian Wang

eess.SY ·submitted 2026-08-11 10:04 UTC · v1

Abstract

State estimation for nonlinear dynamical systems remains a fundamental challenge, particularly when measurements are sparse and internal states are inaccessible. This work presents a KOOPMAN-based Linear State Observer (KOOPMAN-LSO) design framework that enables linear observer synthesis for nonlinear systems through KOOPMAN operator theory. The nonlinear dynamics are lifted into a higher-dimensional observable space using physics-informed basis functions, where a linear predictor with control is identified via extended dynamic mode decomposition with control (eDMDc). A discrete-time Luenberger observer is then constructed in the lifted space, and the observer gain is obtained through a dual linear - quadratic regulator (LQR) formulation to ensure stable and tunable estimation error dynamics. The proposed framework combines the representational capability of KOOPMAN lifting with the simplicity and computational efficiency of linear observer design, providing a systematic approach for nonlinear state estimation under limited sensing. Its effectiveness is demonstrated on a latent thermal energy storage (LTES) system based on phase-change materials (PCM), where internal temperature states are not directly measurable. Experimental results under varying operating conditions show accurate reconstruction of unmeasured states from limited output measurements, illustrating the potential of KOOPMAN-LSO design for practical nonlinear systems. The proposed approach achieves high-fidelity reconstruction with an RMSE as low as 0.0819 °C for the LTES outlet temperature and generally below 1.0 °C for observable internal PCM temperatures.

Closest papers

Nearest neighbours by meaning across the whole index.

Model-Based Koopman-Galerkin Lifting for Guaranteed H-Infinity Output Feedback Control of Nonlinear Systems

eess.SY math.OC ·2026-10-05 ·Burak Kürkçü, Christopher Phan, Aleksandar Zecevic, Maryam Khanbaghi
code/data similarity 0.60
Abstract · 16 pages, 4 figures. Code: https://github.com/kurkcub/RCCG

In this paper, we present a model-based Koopman-Galerkin framework for output-feedback control of nonlinear systems with known dynamics. With a suitable actuator augmentation, the finite-dimensional realization preserves the actuator dynamics and the constant input matrix. The approach is based on an exact decomposition of the lifted dynamics into an LTI system and a finite-order closure residual. It also applies to non-control-affine systems and allows dictionaries that do not span an invariant subspace. Regional bounds are derived for the closure residual, actuator-realization defect, and output-reconstruction error. We use these bounds to formulate a standard $\mathcal{H}_\infty$ output-feedback problem. The controller is linear and dynamic and is implemented using only the measured tracking error. Neither full-state measurements nor a separate state observer are required. Lifting is performed offline. With the state coordinates retained in the dictionary, we obtain explicit transient bounds on the original state and tracking error. A sufficient condition for regional containment is also given. Under this condition, the nonlinear closed loop is forward complete, and the state and tracking error are uniformly ultimately bounded. The cart-pendulum example illustrates the nonlinear closed-loop guarantees. The proposed output feedback gives lower RMSE and peak tracking error on average than Jacobian-based $\mathcal{H}_\infty$ feedback, full-state backstepping, and Koopman-based hybrid MPC.

0.39

Data-Driven Switched State Estimation with Sparse Sensor Scheduling for Nonlinear Networked Systems

eess.SY ·2026-09-25 ·Gianfranco Gagliardi, Franco Angelo Torchiaro, Vincenzo Gallelli, Ayman El Qemmah, Alessandro Casavola
similarity 0.58
Abstract

This paper presents a data-driven framework for joint observer design and sparse sensor scheduling for unknown nonlinear networked systems. The nonlinear dynamics are approximated online as a piecewise sequence of locally linearized discrete-time systems, resulting in a switched linear representation recursively identified through Subspace State-Space System Identification (4SID). To ensure consistency across regime transitions, an Orthogonal Procrustes alignment is introduced to promote coordinate consistency across consecutive regime transitions and mitigate artificial discontinuities caused by arbitrary state-space coordinate changes. Based on the identified local realizations, a dual-rate predictor-corrector observer is designed. The observer gain is computed through a convex optimization problem that jointly addresses estimation accuracy, sensor sparsity, and stability requirements. In particular, an L_{2,1}-norm regularization term promotes column sparsity in the gain matrix, enabling the automatic selection of informative measurement channels, while a spectral-norm constraint guarantees Schur stability of the estimation error dynamics. The proposed framework is first validated on a traffic network simulated in Aimsun Next. Results obtained on an 18-link network show that the observer accurately reconstructs macroscopic traffic states while significantly reducing the number of active sensors required for real-time estimation.

0.21

Model Predictive Control of Heating Systems via Koopman-Operator Bilinearization

eess.SY ·2026-11-02 ·Paula Chanfreut, Erfan Shakhesi, Mircea Lazar, Maurice Heemels
similarity 0.57
Abstract

Hydronic heat emitters are widely used in buildings, but their control is challenging due to nonlinear dynamics, arising from both the heat transfer in each emitter and the hydraulic coupling among those that share a circulating pump. These nonlinearities are often simplified or neglected in the literature. In this paper, we use Koopman theory to make the resulting model more tractable for control. In particular, we propose an input reparameterization and construct an infinite-dimensional set of observables that yields an exact bilinear representation of the system in the chosen lifted space. We then show that truncating the infinite-dimensional representation leads to bounded approximation errors that decrease as the truncation order increases, as well as bounded trajectory deviations over a finite horizon. The resulting bilinear model is incorporated into a model predictive control (MPC) framework to provide thermal comfort in multi-zone buildings while reducing energy use. Using a numerical case study of a five-story building with 20 zones, we show that the proposed Koopman-based MPC achieves a realized performance cost close to that of nonlinear MPC with faster solve times, and outperforms MPC formulations based on time-invariant and time-varying linearizations.

0.27

Adaptive Observer of Nonlinear One-Sided Lipschitz Systems Using Estimated State Regressors With Finite Excitation

eess.SY ·2026-08-31 ·Hamid Taghavifar, Brian Delgado Aguilar
similarity 0.56
Abstract

For systems with unknown parameters, finite excitation and concurrent learning can potentially yield parameter convergence without persistent excitation but the regressor may still depend on inaccessible states, leading to regressor mismatch. In this paper, this problem is addressed for a class of nonlinear systems with one-sided Lipschitz properties and quadratically inner-bounded nonlinearities with bounded disturbances and linearly parametrized uncertainties. To this aim, an output-integral regression is utilized by using measured outputs and estimated states, and history-stack residual is explicitly bounded in terms of state-estimation error and disturbance. Furthermore, a perturbation bound between the estimated-state and true-state information matrices is derived. Additionally, an OSL-QIB LMI condition is applied for the observer design and a projected adaptive law is designed without needing exact output matching. Stability analysis's results indicate the proposed observer and parameter estimation outperform observers without history-stack learning term.

0.13

DeoPC: Data-Enabled Output-Feedback Predictive Control for State Regulation

eess.SY math.DS ·2026-11-19 ·Jingyuan Li, Dawei Shi, Ling Shi
similarity 0.54
Abstract · 14 pages, 4 figures

Constrained regulation of the internal state of an unknown linear system is challenging when only input-output measurements are available online. In this work, we develop a data-enabled output-feedback predictive control (DeoPC) framework for constrained state regulation using input-output data. Specifically, a data-driven state estimate is constructed from past input-output data via a subspace-based singular value decomposition. Based on this state representation, we formulate a predictive controller that directly penalizes the state and control effort while enforcing the system constraints. Under persistent excitation and initialization conditions, we establish recursive feasibility and closed-loop stability of DeoPC in both noise-free and bounded-noise settings. In addition, we show that DeoPC can be calibrated to the physical state coordinates using a few offline state measurements, or treated as a model predictive control tuning problem when no state measurements are available. The effectiveness of DeoPC is demonstrated through simulations on an unstable batch reactor system.

0.26

Residual-Corrected Physics-Informed Neural Network KKL Observers with Input-to-State Stability Guarantees

eess.SY ·2026-11-10 ·Hannah Berin-Costain, Jun Liu, Kirsten Morris
theory similarity 0.53
Abstract · 7 pages, 1 figure, ACC 2027 conference submission

Physics-informed neural network (PINN) Kazantzis--Kravaris--Luenberger (KKL) observers require an approximate solution to a KKL partial differential equation (PDE) and an approximate inverse of this solution. Either approximation can leave a nonzero estimation bias even without measurement noise. In this paper, we remove both errors from the implemented observer by construction. We build an encoder containing an explicitly invertible neural map. Its closed-form inverse provides the internal state reconstruction used to evaluate the learned KKL residual and correct the latent dynamics. This construction makes the synchronization manifold exactly invariant for every value of the network weights. Based on contraction of the residual-corrected observer dynamics, we prove an input-to-state stability (ISS) result for the implemented error dynamics with respect to measurement noise. A direct consequence is that the estimation error converges exponentially to zero in the noise-free setting. We provide two numerical examples, the Van der Pol oscillator and the chaotic Lorenz system, in which the residual-corrected observers achieve exact noise-free convergence and improved error responses compared with released PINN--KKL baselines.

0.27

Adaptive Koopman Predictive Control without Persistent Excitation via Matrix Normal Invariant Priors

eess.SY ·2026-11-16 ·Mircea Lazar
theory similarity 0.53
Abstract

Finite-dimensional Koopman models are increasingly used in predictive control, but their accuracy remains limited by truncation errors and offline identification data. Adaptive Koopman predictive control promises to address this limitation, but typically requires closed-loop persistent excitation (PE). Since this is difficult to achieve in practice, in this paper we develop an adaptive generalized Koopman (GeKo) predictive controller that does not require PE. To this end, we formulate a recursive matrix regression in fixed lifted coordinates that extends the Kalman filter with back-to-the-prior forgetting to matrix-valued operators and uses a matrix normal invariant prior, centered at the operator identified offline. For any regressor sequence, and thus under any feedback law, we prove that the covariance remains between two multiples of the prior covariance and that the estimation error is input-to-state stable. On an academic example, a differential-drive robot and a power system with plant changes and little excitation, the invariant-prior estimator yields the lowest overall tracking error among the compared estimators and prevents covariance windup.

0.24

SALTO: Solver-Anchored Lifted Transfer Operators for Nonlinear Event Inference

cs.LG math.DS ·2026-10-15 ·Qi Wang, Rylie Foster
unusual similarity 0.51
Abstract · 22 pages, 11 figures, 12 tables. Under review. v2: corrected author affiliation

Learned dynamical models can accurately predict trajectories while producing unreliable sensitivities when differentiated or transposed, limiting their use in inverse problems and scientific decision-making. Classical adjoints provide exact local derivatives, but a single adjoint cannot represent the nonlinear response of a system to a family of finite-amplitude perturbations. We introduce SALTO (Solver-Anchored Lifted Transfer Operators), a Koopman-based framework for inferring finite-amplitude sources. In the lifted space, the nonlinear dynamics are approximated by a linear propagator, and its transpose carries each sensor backward in a single solve. The result is a reusable lifted adjoint that predicts the measurement produced by any candidate localized event with one encoder pass and an inner product. To give the model the simulator's exact local behavior, SALTO imposes three structural constraints: it anchors the physical-state dynamics to the simulator's linearized propagator, centers the learned observables so that they vanish to second order at the reference state, and uses a block-triangular lifted propagator. These constraints guarantee that the model reduces to the simulator's tangent dynamics and classical adjoint as the amplitude vanishes, while the learned observables carry only the finite-amplitude correction. On three nonlinear PDE systems, SALTO predicts the measurements of finite-amplitude sources to within 2-8% where the classical adjoint is in error by 41-165%, recovers source position and intensity from sparse sensors nearly as accurately as inversion through the solver, and samples the joint posterior of two interacting sources, matching the solver's posterior on reaction-diffusion at a twentieth of its cost. One trained model serves new sensor layouts and measurement times with a single backward solve.

0.27