CS Paper Radar

Latent variable models for simultaneous EOV identification and removal in population-based SHM

M. D. Champneys, M. R. Jones, A. J. Hughes, T. J. Rogers, E. J. Cross, K. Worden

eess.SP cs.LG ·submitted 2026-08-12 12:33 UTC · v1
benchmark

Abstract

The robust treatment of environmental and operational variability (EOV) is an open challenge in population-based structural health monitoring (PBSHM). The difficulty is compounded in the case that the EOV signals are unmeasured. A common approach in conventional SHM is to apply \emph{projection-based} methods that discard subspaces of healthy feature data, reasoning that the EOV signal dominates the variance of the measured features. However, a common pitfall of projection-based approaches is that when damage acts close to the same variance-dominant direction, damage sensitivity is removed along with the EOV. An alternative identifying assumption for the removal of particular unmeasured EOVs is slowness; the latent EOV process is characterised by its long temporal correlation. In this paper, the latent EOV is cast as a state-space Gaussian process, enabling tractable $\mathcal{O}(T)$ inference via a Kalman filter. A robust hierarchical Bayesian identification framework is developed that enables population-level identification of latent EOVs and EOV-free residual features, using a Laplace approximation. The approach is first validated on a single laboratory-scale benchmark structure from the literature, subject to thermal EOVs, demonstrating robust damage detection and EOV recovery. The method is then applied to a simulated nine-turbine offshore wind farm with staggered deployment and damage, where it delivers a substantial true-positive uplift over projection and cointegration-based baselines at matched false-positive rates.

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Identifiable Representations under Misspecified Structure

cs.LG ·2026-09-27 ·Yuke Li, Yujia Zheng, Ziyi Chen, Kun Zhang, Heng Huang
theory similarity 0.56
Abstract

The presence of noise that depends on the latent variables poses a fundamental challenge to identifiability. Existing results rely on conditional independence among the observations given the latent variables. We study a more general \emph{misspecified structure}, where this conditional factorization does not hold, and establish both precise and approximate identifiability guarantees. We characterize structural misspecification as a perturbed factor analysis problem. For precise identifiability, we establish subspace identifiability under spectral separation and controlled perturbation, followed by component-wise identifiability under structural sparsity. When the precise condition is not guaranteed, we derive an approximate subspace-identifiability theorem. Based on these results, we develop an unsupervised variational estimator for recovering latent variables. Experiments demonstrate the effectiveness of the proposed framework.

0.27

Deep Bayesian Filtering for Nonlinear Structural System Identification: A Tutorial on Structural and Physical Inductive Biases

cs.LG cs.CEstat.ML ·2026-10-27 ·Wei Liu, Konstantinos Vlachas, Eleni Chatzi
benchmark similarity 0.55
Abstract

Nonlinear structural system identification remains challenging when governing physics is only partially known and measurements are sparse. Deep Bayesian filtering addresses these challenges by combining learnable dynamical representations with probabilistic state-space models, physical inductive biases, and uncertainty-aware inference. This paper presents, for the first time, a unified tutorial treatment of deep Bayesian filtering for nonlinear structural system identification, connecting model formulation, learning, posterior inference, and evaluation. Amortized variational inference and differentiable Kalman filtering are introduced as complementary strategies within this broader framework. The Deep Markov Model (DMM) provides a data-driven reference, while the Physics-guided Deep Markov Model (PgDMM) and Neural Extended Kalman Filter (Neural EKF) serve as illustrative instances through which methodological choices and their implications are examined. Dynamic state estimation and joint state and parameter estimation are demonstrated on a three-dimensional shear-frame benchmark with hysteretic Bouc-Wen connections and sparse acceleration measurements. The comparative analysis yields new observations concerning the relationships among reconstruction accuracy, predictive fidelity, physical interpretability, and estimation robustness. Physical structure improves latent-state interpretability without necessarily ensuring faithful predictive dynamics, while comparable typical reconstruction accuracy can conceal substantial differences in estimation robustness. These findings motivate practical guidelines for model construction, training, and evaluation that distinguish reconstruction, forecasting, state recovery, and parameter identification. The tutorial concludes by outlining challenges in uncertainty calibration, identifiability, and validation on real structures.

0.27

Sparse Separable Factor Analysis in the Complex Domain with an Application to Local Field Potential Data

cs.LG stat.MLstat.COstat.ME ·2026-08-21 ·Ian Hultman, Kirtikanth Kalapatapu, Yassine Filali, Rainbo Hultman, Sanvesh Srivastava
similarity 0.54
Abstract · 50 pages, 9 figures, and 7 tables

Complex-valued arrays arise in signal processing, where scientific interpretation depends on retaining amplitude and phase information. Existing covariance estimation methods either ignore the multiway organization of such data or rely on real-domain embeddings that do not directly exploit their complex structure. We develop sparse separable factor analysis (SSFA), a latent factor model for complex-valued arrays with a separable covariance structure across modes. Each mode-specific covariance matrix is modeled through a low-rank Hermitian factor structure and a diagonal residual covariance matrix. To obtain interpretable estimates, we impose elementwise lasso penalties on the complex loading matrices and estimate the SSFA parameters using a mode-wise parameter-expanded expectation-maximization procedure. The resulting loading updates admit closed-form complex soft-thresholding solutions, which shrink the modulus of each loading while preserving its phase. A separate balancing step resolves the scale nonidentifiability of the separable covariance structure. Simulation studies show that SSFA improves covariance estimation relative to vectorization-based methods, including complex principal component analysis. We apply SSFA to local field potential recordings from mice, where we compare separability structures induced by different groupings of brain region, frequency, and time and perform model-based imputation of recordings missing because of electrode misplacement.

0.29

Multivariate linear regression without prior assumptions

eess.SY stat.APstat.CO ·2026-09-09 ·Mayank S. K. Gupta, Deepanjhan Das, Arun K. Tangirala, Shankar Narasimhan
benchmark similarity 0.53
Abstract · The manuscript is under further processing. Important modifications might take place in further versions. There are 32 pages containing 10 f…

Recovering the linear relationships that govern a system from noisy measurements is a basic task across the physical and engineering sciences. Because every measured variable may carry an unknown amount of noise, classical regression must commit in advance to a set of structural assumptions: ordinary least squares requires a declared input-output partition with input variables being noise-free, total least squares assumes equal noise variance across all variables, and generalized total least squares additionally requires the noisy-variable partition and variances to be known beforehand. Kalman~\cite{Kalman:1982} showed that any procedure returning a unique linear model from inexact data must rest on such unverifiable a priori assumptions -- ``prejudices'' -- that cannot be checked against the data itself, and that removing them leaves the identification problem fundamentally indeterminate. Whether these prejudices can instead be resolved directly from the data has remain unresolved. Here we show that an iterative generalized-eigenvalue algorithm, QZ-IPCA, recovers the noisy-variable partition, noise variances, number of linear relations, and regression coefficients of a multivariate linear system simultaneously, using only the raw data. Across all possible exhaustive noise configurations of a five-variable benchmark network, QZ-IPCA correctly identifies model structure and recovers coefficients with error below 6.4\%. It outperforms ordinary least squares even when given the best partition, and succeeds in rank identification precisely where standard total least squares falls once noise variances differ across variables. These results show that the assumptions conventionally required for multivariate regression are not necessary, recasting model identification as a problem solvable from data geometry alone.

0.26

Robust Covariance Estimation for Entry-wise Contaminated and Partially Observed Data via Expectation Maximization Algorithm

cs.LG stat.ML ·2026-10-15 ·Matys Savidan, Mohammed Nabil El Korso
similarity 0.50
Abstract

Robust covariance estimation under entry-wise contamination and missing data is challenging in various signal processing applications. Under the Student-$t$ model, observation-level reweighting induces a uniform attenuation across samples, which can lead to cumulative information loss even when most coordinates remain informative. The alternative Student-$t^*$ model enables coordinate-wise robustness, but its E-step is not available in closed form. We extend inference for the Student-$t^*$ model to incomplete observations through a stochastic approximation EM (SAEM) algorithm operating on a reduced latent space: stochastic updates of the coordinate-wise scales are combined with Rao-Blackwellized Gaussian conditional moments, which avoids explicit sampling of latent Gaussian variables while preserving a likelihood-based framework. Experiments on synthetic and real sensor data show a lower Fisher-Rao error than Gaussian, Student-$t$, imputation-based and detect-then-estimate estimators at moderate to high outlier rates under diffuse contamination.

0.21

GT-PSSM: Unified Probabilistic Framework for Stochastic Dynamics Modeling and Dependency Learning in Multivariate Time Series Anomaly Detection

cs.LG stat.ML ·2026-09-28 ·Wonmo Koo, Jaeyeong Lee, Taeseong Yoon, Heeyoung Kim
top venue similarity 0.50
Abstract

Multivariate time series anomaly detection (MTAD) is crucial for ensuring the safe and reliable operation of complex systems. Many existing methods learn normal patterns by training reconstruction or forecasting models on predominantly normal data. However, a large portion of these approaches rely on deterministic models and their associated point-wise output errors for anomaly scoring. Since real-world multivariate time series are inherently stochastic due to measurement noise and intrinsic system randomness, purely error-based scores can be unreliable, as large errors may arise from benign fluctuations rather than true anomalies. Probabilistic approaches address this limitation by quantifying uncertainty in model outputs. In particular, probabilistic state-space models (PSSMs) provide a principled framework by modeling stochastic system dynamics through latent state transitions and measurement noise via emission models. Despite this advantage, existing PSSM-based MTAD methods often struggle to capture long-range temporal dependencies and inter-variable dependencies, as they typically rely on noise-sensitive recurrent architectures and lack explicit cross-variable structure modeling. To address these limitations, we propose Graph-Transformer-Enhanced Probabilistic State-Space Model (GT-PSSM), a novel PSSM-based MTAD method that tightly integrates PSSM-based probabilistic modeling of stochastic dynamics with Graph Transformer-based learning of temporal and inter-variable dependencies. By jointly modeling stochasticity, long-range temporal dependence, and variable interactions within a unified probabilistic framework, GT-PSSM enables more robust anomaly detection.

0.32

Amortized Structured Stochastic Variational Inference for Gaussian Process Latent Variable Models

cs.LG stat.ML ·2026-10-02 ·Maksym Tretiakov, Sarah Filippi, Vincent Fortuin, Ruth Misener, Ruby Sedgwick +1 more
similarity 0.50
Abstract

Many machine learning methods aim to approximate the lower-dimensional manifold on which the data lives. A desirable feature of such methods is that they should capture the epistemic uncertainty of this learned manifold. One model that achieves this is the Gaussian Process Latent Variable Model, in which a Gaussian Process (GP) mapping from the latent space provides an estimate of the uncertainty of the manifold. However, the effectiveness of this uncertainty estimation is limited by the mean-field variational approximation between the GP inducing points and the latent variables. In this work, we apply Amortized Structured Stochastic Variational Inference to allow the variational posterior for the latent space to be conditionally dependent on the value of the inducing points. We demonstrate that this more flexible variational posterior improves several metrics relating to the reconstruction of points on the data manifold.

0.22

Identifying Dependent Components from Multi-domain Linear Mixtures

cs.LG cs.AI ·2026-10-20 ·Danru Xu, Lauri Parkkonen, Sara Magliacane, Aapo Hyvärinen
top venuehighly cited similarity 0.49
Abstract · 29 pages, 3 figures

We study a linear mixing model with dependent latent components, assuming multiple data domains. Most existing models assume that the components are independent or at least uncorrelated, in line with independent component analysis (ICA). Some recent work allows for dependent components, but then makes specific assumptions such as parametric forms of dependencies, multi-view settings, or interventions, or does not recover the individual components. In contrast, we consider a multi-domain setting in which domains differ through domain-specific scalings of the components, while the distribution of the underlying latent components is the same across domains. This approach can model data collected, for example, from different sensors measuring the same process, different laboratories conducting the same experiment, different experimental conditions, or different subjects that might differ in biological or physiological factors. We show that, under sufficient domain variability, latent variables and mixing functions can be identified from second-order statistics alone. We propose the Multi-Domain Covariance Matching (MuDo-CoM) algorithm that generalizes previous methods of joint diagonalization. MuDo-CoM is validated on simulated data and a real-world fMRI dataset.

0.63