CS Paper Radar

Channel Estimation for OTFS Systems With Overspread Doppler Shifts

Preety Priya, Yi Hong, Emanuele Viterbo

cs.IT cs.ET ·submitted 2026-08-12 18:56 UTC · v1
top venue

Abstract

In this paper, we consider an orthogonal time frequency space (OTFS) system in time-varying channels with overspread Doppler shifts, typically found in non-terrestrial multi-satellite links. The overspread Doppler shifts with magnitude greater than half of the subcarrier spacing, result in aliased Doppler shifts in the delay-Doppler (DD) domain due to the OTFS modulo operation. This makes channel estimation very challenging and the traditional channel estimation methods become ineffective. To address this challenge, we propose a DD training frame and a two-stage channel estimation method. The training frame comprises a cosine pilot signal and a pilot symbol. In the first stage of the channel estimation, the pilot symbol in the DD domain is utilized to estimate the delays, aliased Doppler shifts, and channel gains of the propagation paths. In the second stage, the received time domain signal is converted into the frequency domain to detect the peaks of all the Doppler shifts using the cosine pilot signal. Then, we present a threshold-based method to pair the estimated actual Doppler shifts with their corresponding delays and channel gains. The complexity of the proposed channel estimation is also discussed. Finally, the performance of the proposed channel estimation is validated in terms of the normalized mean square error (NMSE) and bit error rate (BER) in various scenarios.

Closest papers

Nearest neighbours by meaning across the whole index.

Channel Estimation for OFDM via Delay-Doppler Refinement

cs.IT ·2026-09-09 ·Mingcheng Nie, Hao Chang, Xiaoqi Zhang, Junkai Liu, Wibowo Hardjawana +2 more
similarity 0.73
Abstract

In this paper, we propose a novel channel estimation (CE) algorithm for orthogonal frequency division multiplexing (OFDM) systems that exploits the unique characteristics of the delay-Doppler (DD) domain channel. Specifically, the time-frequency (TF) domain input-output relationship (IOR) is derived in a compact form by focusing solely on the non-zero elements of the TF domain channel matrix. Based on this compact IOR, a coarse TF domain CE is first performed using a linear minimum mean square error estimator. Then, the resultant TF domain estimates are transformed to the DD domain through a unitary transformation for further refinement. We reveal that the effective DD domain channel matrix can be viewed as an aggregation of multiple DD domain channel responses with different phase shifts. This allows us to devise a threshold-based estimation for DD domain channel parameters with high accuracy. The estimated DD domain channel parameters are then applied to form a refined estimate of TF domain channel. Our numerical results demonstrate that the proposed method can achieve substantial performance gains over conventional OFDM channel estimation techniques under the same pilot deployment.

0.24

Neural Network-Based Delay-Doppler-Assisted Channel Estimation for OFDM

cs.IT ·2026-08-29 ·Mingcheng Nie, Hao Chang, Shuangyang Li, Haiyao Yu, Jiafu Hao +1 more
published similarity 0.68
Abstract

Conventional orthogonal frequency division multiplexing (OFDM) channel estimation relies on single-tap estimation and time-frequency (TF) interpolation, which becomes unreliable in high-mobility channels because Doppler-induced inter-carrier interference (ICI) invalidates the underlying element-wise TF model. This paper proposes a neural-network-based delay-Doppler (DD)-assisted channel estimation framework for OFDM over doubly selective channels. We first derive an ICI-aware TF domain input-output relation and formulate channel estimation as a DD recovery problem. Unlike conventional sparse recovery approaches, the proposed framework does not require the equivalent DD domain channel vector to be strictly sparse, thereby accommodating the leakage induced by fractional delay and Doppler shifts. Since the data symbols are unknown during channel estimation, the sensing matrix is constructed using only the known pilot symbols. As a result, data-induced interference is not explicitly modeled, leading to a structured mismatch in the pilot observations. To tackle this challenge, the adopted network iteratively exchanges observation- and channel-domain features through the sensing matrix to learn the mapping from these contaminated observations to the equivalent DD domain channel, which is subsequently used to reconstruct the TF-domain channel. Simulation results show that the proposed method achieves lower normalized mean-square error and bit-error rate than conventional OFDM estimators.

0.51

Sensing Fast and Distant Targets in Fractional Overspread Channels with Zak-OTFS and Modular Arithmetic

eess.SP cs.IT ·2026-10-29 ·Andrea Novero, Mudasir Ahmad Sheikh, Danish Nisar, Saif Khan Mohammed, Michele Zorzi +1 more
similarity 0.67
Abstract · 14 pages, 8 figures, 4 tables

Delay-Doppler (DD) modulations, such as Zak-transform-based orthogonal time frequency space (Zak-OTFS) modulation, represent the channel as a sparse set of delay and Doppler shifts, which makes them well suited for radar sensing. Sensing with a single DD frame, however, is unambiguous only when the channel spread factor, i.e., the product of the delay and Doppler spreads, is less then one. Long-range mobility scenarios, including drones, airplanes, low Earth orbit (LEO) satellites, and underwater acoustic links, typically violate this crystallization condition, so that a single frame aliases the target delays, Doppler shifts, or both. Existing methods add a time-frequency pilot to a conventional DD frame, resolve the aliasing in only one dimension, and assume integer delays and Doppler shifts. We propose a frame design that combines multiple DD bases with different delay and Doppler periods, which together cover an overspread channel with fractional delays and Doppler shifts, using the same bandwidth and frame size. We show that modular arithmetic on the peak positions uniquely recovers each target by pairing the peaks through their common projection and their gains, and we derive the condition under which this pairing is ambiguous. We implement the design with two superimposed Zak-OTFS frames and propose two receivers: dual-frame sensing (DS), which performs the joint detection directly, and DS with cross-pilot cancellation (DS-XC), which additionally cancels the cross-pilot interference, re-estimates the gains by joint least squares, and removes ghost targets. Both receivers maintain a detection rate close to one as the spread factor grows, and DS-XC also achieves the lowest false-alarm rate and channel estimation error among all the compared systems. In a 100 km drone scenario, DS-XC outperforms all baselines, with a complexity that grows near-linearly with the time-bandwidth product.

0.22

Cross-Domain Channel Estimation for MU-MIMO-OFDM

cs.IT ·2026-11-05 ·Mingcheng Nie, Shuangyang Li, Ruoxi Chong, Giuseppe Caire, Yonghui Li
similarity 0.67
Abstract

Conventional channel estimation for multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) relies on the pilot interpolation without explicitly identifying the sparse delay-angle (DA) components. To exploit DA sparsity while maintaining backward compatibility with existing MIMO-OFDM systems, we propose a cross-domain channel estimation scheme for multiuser MIMO-OFDM (MU-MIMO-OFDM) systems. The scheme exploits the circular convolution structure in the DA domain to identify candidate DA pairs by correlating delay-domain observations with DA pilot responses. These pairs and the known pilots then define a time-frequency (TF) dictionary for refining the DA coefficients from TF observations through least-squares or sparsity-regularized fitting. The refined coefficients and candidate pairs reconstruct the aggregate channel across antennas and subcarriers aligning with the geometric channel model. Numerical results show approximately 10 dB and 7 dB lower normalized mean-square error than the conventional OFDM estimation schemes for integer and fractional delay and angle indices, respectively.

0.10

AFDM Channel Parameter Estimation: Exploiting its Shift Properties and Input-Output Relationship

eess.SP ·2026-10-08 ·Jialiang Zhu, Zeping Sui, Zilong Liu, Arman Farhang
hot direction similarity 0.65
Abstract

Affine frequency division multiplexing (AFDM) has attracted significant attention owing to its excellent backwards compatibility, full diversity achievability, as well as strong resilience to high Doppler and various hardware impairments. Existing AFDM channel parameter estimation methods, however, either require large pilot overhead or rely on computationally intensive grid search methods. This paper proposes a grid-search-independent, low-overhead, impulse-pilot-based channel parameter estimation method for AFDM systems by exploiting its inherent shift properties. Specifically, we show that the effect of a Doppler shift on the impulse pilot is equivalent to a delay shift in the time domain with a phase rotation. Additionally, both delay and Doppler shifts lead to cyclic shifts in the affine domain. By utilizing these properties in both the time and affine domains, two linear equations are formed to estimate the integer delay and Doppler of each path. The fractional part of the Doppler is estimated from the Doppler-induced leakage around the impulse pilot by exploiting the AFDM input-output relationship. For multipath channels, a successive interference cancellation (SIC) framework is developed, in which the strongest propagation path is first estimated, reconstructed, and canceled before the remaining paths are successively estimated. Simulation results demonstrate that the proposed method significantly reduces computational complexity and allows lower pilot overhead than the benchmarks. The proposed method also achieves improved channel parameter estimation and

0.26

A Parallel Two-Stage Prony Framework for Robust Delay-Doppler Estimation

eess.SP ·2026-10-28 ·Liangchen Sun, Yutaka Jitsumatsu
similarity 0.64
Abstract

This paper addresses off-grid physical delay-Doppler parameter estimation based on an orthogonal time frequency space (OTFS) pilot waveform over doubly selective channels. Based on a known single-pilot waveform with a frequency-shifted sinc pulse structure, we propose a parallel dual-order estimation framework, in which Prony-based Doppler-first and delay-first procedures are executed concurrently and their candidate paths are jointly fused. The two estimation orders provide complementary resolution characteristics, thereby mitigating ambiguities caused by closely spaced multipath components and fractional delay--Doppler mismatch. Numerical results show that the proposed framework improves detection reliability and estimation stability compared with a single-order Prony estimator, especially in off-grid scenarios and low-to-moderate signal-to-noise ratio regimes.

0.26

A Deep Iterative Refinement Receiver for OTFS Symbol Detection in Doubly-Dispersive Channels

eess.SP ·2026-08-31 ·Efe Ispir, Ian P. Roberts
similarity 0.63
Abstract

Orthogonal time frequency space (OTFS) modulation has emerged as a promising candidate for high-mobility wireless communication systems due to the diversity it offers across both time and frequency. Reliable OTFS detection, however, remains challenging under doubly-dispersive channels, where delay and Doppler dispersion induce structured interference between transmitted symbols and complicate symbol recovery. To address these challenges, we propose a two-stage iterative OTFS detector that integrates a physics-informed learned initializer with an iterative refinement network, enabling progressively more accurate symbol estimates in doubly-dispersive channels. The initializer incorporates the known delay-Doppler input-output relationship to produce a robust first-stage estimate, while the refinement stage iteratively suppresses residual symbol interference in the delay-Doppler domain. Simulation results demonstrate that the proposed detector achieves consistent performance gains over conventional and existing learning-based detectors across a variety of channel conditions. These results highlight the effectiveness of incorporating known channel structure into the detection process and using iterative refinement for improved and robust OTFS detection.

0.27

Model-Order-Adaptive Channel Estimation for AFDM Systems with Fractional Delay and Doppler

cs.IT ·2026-10-07 ·Ruizhe Wang, Cunhua Pan, Hong Ren, Shaohua Li, Jiangzhou Wang
hot direction similarity 0.62
Abstract

Affine frequency division multiplexing (AFDM) has emerged as a promising waveform for high-mobility communications owing to its ability to exploit multipath diversity. However, channel state information (CSI) acquisition remains challenging in channels with fractional delay and Doppler and an unknown number of propagation paths. In this paper, we investigate the channel estimation for AFDM systems. We first analyze the AFDM response in the presence of fractional-delay-induced frequency wrapping. The analysis reveals that fractional delay may displace the dominant extremum and generate informative secondary extrema. Then, we develop a model-order-adaptive channel estimator within an improved space-alternating generalized expectation-maximization (SAGE) framework. A dual-pilot reference symbol is employed for path and delay initialization, while pilot observations across multiple AFDM symbols provide temporal information for Doppler estimation. New paths are identified through statistically controlled residual tests, whereas unsupported or redundant paths are removed by conditional support pruning. The delay, Doppler frequency, and complex gain of each retained path are subsequently estimated through a coarse-to-fine procedure and refined using the exact AFDM likelihood. Simulation results demonstrate that the proposed method achieves lower normalized mean squared error (NMSE) and bit error rate (BER) than representative SAGE, sparse-recovery, and Bayesian benchmarks. It also provides reliable path detection and model-order estimation and maintains robust performance at terminal velocities of up to 600~km/h.

0.25