CS Paper Radar

Sensorimotor Stickies: A Reconfigurable On-Body Platform for Closed-Loop Sensorimotor Training

Tianhong Catherine Yu, Jiwei Zheng, Chi-Jung Lee, Qifeng Yang, Tingyu Cheng, Qiuyue Shirley Xue, Cheng Zhang, Yiyue Luo

cs.HC ·submitted 2026-08-13 16:07 UTC · v2
top venue

Abstract

Closed-loop sensorimotor training systems can improve learning by sensing movement and delivering real-time feedback, yet most are built as fixed implementations tied to a single task, even though the core technology (inertial and tactile sensing, vibrotactile cueing, rule-based logic) remains the same. We present Sensorimotor Stickies, a reconfigurable on-body platform that treats sensing and vibrotactile feedback as modular stickies that can be patched onto the body as needed. The platform includes miniaturized adhesive modules for IMU sensing, optional tactile sensing, and vibrotactile actuation; low-power firmware and BLE infrastructure for raw streaming and motor control without task-specific rewrites; and a companion mobile app that provides a shared body-centered model for placement, calibration, and feedback authoring. Together, these components enable reconfiguration across training scenarios, user needs, and feedback setups. We evaluate the platform through technical characterization, configured application demonstration, practitioner-mediated configuration sessions, and an end-user study, demonstrating technical feasibility, reconfiguration breadth, and end-user configurability for first-time setup, calibration, and within-task feedback reconfiguration.

Closest papers

Nearest neighbours by meaning across the whole index.

Vision-Based Tactile Intelligence for Robotics: Sensing, Learning, and Embodied Manipulation

cs.RO ·2026-08-16 ·Peng Zhou, Jun Hu, Sihan Chen, Zeqing Zhang, Haofei Ma +10 more
similarity 0.64
Abstract

Tactile sensing is essential for robots in contact-rich tasks, yet many tactile sensors still provide sparse, low-dimensional signals that do not capture sufficient information for complex robotic perception and interaction. Vision-based tactile sensors (VBTSs) offer a powerful alternative by con-verting contact-induced deformation of a soft interface into im-ages. The image-based formulation gives VBTSs high-resolution, information-rich tactile observations that enable complex robotic tasks. This review surveys the full VBTS pipeline and treats sensing hardware, learning methods, simulation, and datasets as an integrated sensing-and-learning system. We 1) organize representative VBTSs into a hardware taxonomy structured by deformable elastomer design, sensor size and shape, and optical system design to guide future sensor development; 2) present a hierarchical view of learning-based tactile intelligence from low-level signal understanding to task-level policies and foundation models; and 3) examine simulation platforms and tactile datasets as a scaling layer, together with sim-to-real transfer and cross-sensor adaptation for training, benchmarking, and deployment. Finally, we identify open challenges and future directions for VBTSs in robotics. By providing a holistic view of how hardware, AI architectures, simulation, and datasets interact, this review aims to advance tactile intelligence for contact-rich robotic tasks.

0.40

Tactile-Guided Robot Learning: From Representation Learning to Foundation Models

cs.RO ·2026-10-14 ·Kiyanoush Nazari, Luchen Li, Haoshu Fang, Nima Fazeli, Zhibin Li +2 more
similarity 0.63
Abstract

Tactile sensing is becoming central to robust, adaptive, and dexterous robotic manipulation. Beyond its traditional role in contact detection and reactive control, touch is increasingly used to learn transferable representations, condition manipulation policies, and support embodied physical reasoning. Yet existing surveys largely emphasize tactile hardware and perception, leaving the rapid shift toward learning-based tactile manipulation insufficiently synthesized. This paper reviews tactile-guided skill learning from a learning-centric perspective, organized by the functional role of touch across the learning and control pipeline. We examine tactile representation and policy learning, tactile foundation models, predictive and adaptive control, and generalization across objects, tasks, sensors, embodiments, and simulation-to-real transfer. Across these directions, we identify common design principles and remaining challenges in learning transferable physical representations, integrating semantic reasoning with contact-level control, and scaling tactile learning across heterogeneous data and hardware. Finally, we outline emerging directions toward tactile foundation and world models that can predict, reason about, and adapt physical interactions. Together, this review characterizes the transition of touch from a task-specific feedback signal toward a core modality for general-purpose embodied intelligence. An accompanying database of the reviewed literature and associated resources is available at https://sites.google.com/view/touch-in-robot-learning-review.

0.44

Tactile Sensors Are an Effective Substitute for Wrist Cameras in Contact-Rich or Occluded Manipulation

cs.RO ·2026-11-07 ·Aijia Yang, Arsh Tangri, Sergey Zakharov, Krishna Murthy Jatavallabhula
similarity 0.62
Abstract · Accepted at the 3rd Workshop on Dexterous Manipulation: Full-Stack Robotics on Learning and Design, CoRL 2026

Learned manipulation policies often rely on wrist-mounted cameras for close-range visual feedback that complements external views of the workspace. However, contact-rich manipulation requires establishing and maintaining contacts that can remain hidden even from wrist cameras. Tactile sensors mounted on fingers can reliably and directly measure contact, without needing visual access. In this work, we show that this feedback enables policies to recover the performance advantage of wrist cameras using scene and egocentric vision together with touch. Our approach incorporates two low-cost tactile arrays into a visuotactile ACT policy, without wrist images during training or deployment. We evaluate six real-world task families spanning placement, insertion, occluded retrieval, and sustained-contact tool use. On three contact-rich tasks, we independently vary wrist-camera and tactile availability while keeping the demonstrations, policy architecture, and optimization settings fixed. Adding wrist cameras improves success by 18.3-28.3 percentage points over vision without wrist images. Adding tactile sensing instead improves success by 31.7-60.0 percentage points and yields higher observed success than vision-only policies with wrist cameras on all three tasks, with significant advantages on two under Holm-corrected tests. These results support finger-mounted tactile sensing as an effective alternative to wrist cameras in the evaluated contact-rich settings.

0.24

TACROSS: An Efficient and Low-Cost Scalable Human Touch System Across Heterogeneous Tactile Sensors for Dexterous Robot Learning

cs.RO cs.LG ·2026-10-08 ·Bo Chen, Huanzhang Hu, Junyang Ma, Bo Yue, Fangdi Yu +9 more
code/data similarity 0.62
Abstract

Collecting tactile demonstrations on robots is costly and slow, motivating the use of lower-cost human tactile gloves for scalable data collection. However, human capacitive/piezoresistive gloves and robotic tactile sensors differ fundamentally in transduction principle, sensor layout, spatial resolution, and dynamic response, making alignment of raw sensor channels ill-posed. To address this problem, we present TACROSS, a scalable system for learning from human touch and transferring it to robots that bridges this heterogeneity by aligning tactile streams at the level of contact events rather than raw sensor values. The hardware component of TACROSS integrates a piezoresistive glove with five layers and a cost of USD 10.86 with 285 sensing points. To align contact semantics, we design canonicalizers and residual adapters that map heterogeneous signals into a shared tactile latent with 256 dimensions via a temporal Transformer with attention across fingers. We further introduce a robot-grounded policy learning scheme in which robot demonstrations provide the sole source of ground-truth action supervision, while human demonstrations support tactile representation learning and provide confidence-weighted auxiliary supervision through valid retargeted hand targets. We evaluate our system on four contact-rich manipulation tasks. Compared to conventional teleoperation, our proposed system achieves a 3.5-fold efficiency improvement while reducing demonstration acquisition equipment cost by 95.7%. We will open-source the TACROSS hardware and software system and publicly release a tactile dataset comprising over 150 hours of recordings. Project page: https://tacross-touch-project.github.io/.

0.23

PolyUMI: Accessible Visual-Tactile-Audio Data Collection for Object Inference and Manipulation

cs.RO ·2026-09-24 ·Conor W. Hayes, Rickmer Krohn, Aravind Ramaswami, Anunth Ramaswami, Nils Dengler +4 more
code/data similarity 0.61
Abstract · 9 pages, 10 figures, preprint

Humans typically rely on vision, touch, hearing, and proprioception to perceive contact and adapt their actions during manipulation. Providing robots with comparable responsiveness therefore requires hardware that can retain and use these complementary sensory signals. Most imitation-learning systems, however, observe demonstrations primarily through vision and proprioception, limiting access to contact information that is difficult to infer visually. We present PolyUMI, an open-source platform for scalable visual--tactile--audio demonstration collection and robot deployment. Its lightweight, wireless handheld gripper records synchronized wrist-camera, optical tactile, contact-audio, and proprioceptive observations without requiring a tethered workstation. The same sensing finger can be transferred to the robot end effector, preserving the sensing geometry between demonstration collection and policy execution. To effectively use these heterogeneous observations, we further introduce VisTA, a token-level multimodal policy that integrates information across sensors and time to predict contact-aware robot actions. Experiments spanning object inference, slip control, and contact-rich manipulation show that touch and audio reveal task-relevant information beyond vision and that VisTA is competitive with or outperforms existing multimodal policies. Together, PolyUMI and VisTA provide an accessible pipeline for collecting multimodal demonstrations and learning policies that perceive physical interaction beyond vision. Project Page: https://polyumi-vista.github.io

0.35

TacClaw-Infinity: A Large-Scale Vision-Tactile-Language-Action Dataset for Dexterous Manipulation

cs.RO ·2026-10-14 ·Fucai Zhu, Xidong Zhang, Yichi Zhang, Yipan Wang, Fubo Wang +21 more
code/data similarity 0.61
Abstract · Updated project website and code repository links; research content unchanged. Project: https://tacclaw-infinity.github.io/ ; Code: https://…

Large-scale robot learning increasingly relies on diverse human demonstrations, yet tactile manipulation data remain difficult to scale, and existing multimodal datasets often lack consistent quality control and structured supervision. We present TacClaw-Infinity, a large-scale structured Vision-Tactile-Language-Action (VTLA) dataset for contact-rich manipulation, collected with TacClaw, a tactile-enabled UMI-style handheld interface that records synchronized visual observations, fingertip tactile signals, and end-effector trajectories without requiring a target robot during data collection. TacClaw-Infinity is built through a distributed worldwide collection across homes, laboratories, industrial workplaces, retail stores, and outdoor environments including tasks contributed by academic and industrial collaborators. Together, these efforts yield over 10,000 hours, 1 million episodes, and 1 billion frames spanning more than 1,000 task types. We develop a scalable pipeline for trajectory reconstruction, multimodal quality control, embodiment-aware filtering, and structured annotation, covering contact-centric segmentation, subtask description, and spatial grounding. We validate TacClaw-Infinity at both the data and model levels: At the data level, we assess the collection interface, the action-space compatibility of the curated demonstrations, and the structured annotations, while for the model level, we demonstrate cross-embodiment transfer across three heterogeneous robots without robot-specific demonstrations.

0.24

SoTa: Soft Tactile Skins for Dexterous Manipulation

cs.RO cs.LG ·2026-10-01 ·Jingyun Yang, Baiyu Shi, Timothy Yu, Haitian Liu, Alberta Longhini +4 more
code/data similarity 0.61
Abstract · The first three authors contributed equally. Project website: https://sota-skin.github.io

A growing body of work suggests that tactile sensing gives robot policies contact information that complements vision in dexterous manipulation. However, visuo-tactile robot data remains scarce: dexterous demonstrations require teleoperating robots, which limits dataset scale. Human demonstrations are far cheaper to collect and offer a path to scale this data, but only if human and robot hands carry tactile sensors with corresponding signals. This requires sensors that conform to different hand geometries, cover the full hand, and share a common layout across embodiments. We present SoTa, a low-cost capacitive tactile skin that provides full-hand coverage on humans and robots while preserving a shared layout of 202 taxels across corresponding finger and palm regions. Our multilayer design with fabric electrodes enables in-house fabrication of thin, soft skins with customizable geometry for under $10 in materials per skin. The sensor retains over 97% of its initial response span after 10,000 loading-unloading cycles with traces retaining continuity through 1,280 tight-fist folding cycles. The shared taxel layout supports human-robot co-training with a common tactile encoder and no learned cross-sensor mapping. Across three contact-rich manipulation tasks, tactile observations improve in-distribution success over vision-only policies. With a fixed robot demonstration budget, adding human demonstrations more than doubles mean success across eight evaluation conditions, from 22.8% to 45.9%, improving success in all five out-of-distribution conditions. We plan to open-source the resources needed to fabricate and operate these skins.

0.20

OpenTac: An Open Ecosystem for Customizable, Scalable, and Transferable 3D Tactile Sensing

cs.RO eess.SPeess.SY ·2026-10-22 ·Ariel Slepyan, Geeta Chandra Raju Bethala, Jiafeng Gu, Anagha Rajendra Dangle, Yinzhe Zhou +10 more
code/data similarity 0.61
Abstract · 15 pages, 15 figures. Project website, open-source hardware and software, and demonstration videos: https://opentac.github.io

We present OpenTac, a novel sensor and a full-stack ecosystem for tactile skins that are highly customizable, scalable, and readily deployed in downstream robot control and learning applications. Our core contribution is twofold. First, we develop a scalable resistive tactile skin with a structured deformable overlay that converts tangential loading into spatially varying pressure. Differential responses across neighboring "taxels" support decoding of local shear vectors, and the common-mode response encodes normal force. Second, we provide a highly customizable sensor design tool that is able to automatically generate fabrication files for these tactile skins from 2D outlines and developable 3D surfaces, including from abstract descriptions such as text. We develop an ecosystem around the OpenTac sensor, including the CAD design tool, a sensor simulator, cross-sensor transfer, and fast/adaptive data acquisition. We demonstrate the broad applicability of the OpenTac-CAD sensor design tool by designing and fabricating more than 30 sensors across a variety of robot embodiments. We characterize the three-dimensional tactile fields produced by OpenTac with a commercial, high-precision force/torque sensor. We demonstrate the broad applicability of 3D tactile sensing across contact-rich feedback control and manipulation policy learning on four real-world robot embodiments. Additionally, adaptive acquisition enables kilohertz-rate partial readouts, and our readout circuitry enables high dynamic range (HDR) acquisition, measuring, for example, a 3.7 kg weight stack and a 20 g weight on the same sensor in the same frame. We provide all hardware, software, and result videos at opentac.github.io

0.21