CS Paper Radar

Exploring High-Bandwidth Flash for Modern LLM Inference: Opportunities and Challenges

Dowon Son, Yonggon Park, Hyunuk Cho, Hyungkyu Ham, Onur Mutlu, Sungjin Lee, Gwangsun Kim, Jisung Park

cs.AR ·submitted 2026-08-14 01:36 UTC · v1
top venuehighly cited

Abstract

This work investigates the potential benefits and technical challenges of using high-bandwidth flash (HBF) for large language model (LLM) inference. HBF has gained increasing attention as a promising solution to mitigate memory-capacity bottlenecks in modern LLM-serving systems, but its benefits and challenges remain largely uninvestigated. To address this gap, we thoroughly analyze HBF-based LLM-serving systems under diverse system configurations and operating scenarios in which HBF serves as a main GPU-memory component to handle both reads and writes. Our analysis shows that, despite its limited write performance, HBF can significantly improve the batch size, throughput, and flexibility of LLM-serving systems while reducing the minimum GPU requirements, but realizing these benefits critically depends on sustaining HBM-comparable read bandwidth and requires significant endurance improvements.

Comment
4 pages, 7 figures, IEEE Computer Architecture Letters (CAL)
DOI
10.1109/LCA.2026.3705817

Closest papers

Nearest neighbours by meaning across the whole index.

SlipStream: Enabling HBF for GPU Systems by Mitigating the Latency and SRAM Overheads

cs.AR cs.DCcs.LG ·2026-11-10 ·Anish Saxena, Hritvik Taneja, Christos Kozyrakis, Aamer Jaleel
top venue similarity 0.78
Abstract · To appear in 2027 IEEE International Symposium on High-Performance Computer Architecture (HPCA)

Large language model (LLM) inference demands ever more memory capacity for larger models and batch sizes. High-Bandwidth Flash (HBF) replaces the DRAM dies of HBM with NAND flash and provides up to 16x the capacity at comparable read bandwidth. However, HBF can incur a read latency of nearly 20$μ$s, 20x that of HBM, so on-demand HBF accesses slow inference by up to 12.8x. Conventional cache-line prefetchers require 20x more in-flight tracking state to cover this latency. Tensor-streaming designs, such as H3, follow virtual-address order as opposed to kernel-demand order, and therefore need hundreds of megabytes of buffering. We propose SlipStream, a software-hardware co-designed prefetcher that turns prefetching into a demand-paced producer-consumer pipeline. In software, SlipStream profiles the repeatable weight-page demand order of data-independent LLM kernels and inserts a staging warp that replays this order with non-blocking STAGE instructions. In hardware, the staging warp acts as the producer and the work warps as consumers. Our key insight is to retire each STAGE tracking entry only when demand first accesses the page, as opposed to when the page returns from HBF. Demand thus paces staging and bounds how far staging leads consumption. SlipStream tracks 4 KB pages instead of cache lines and allocates buffer slots only when pages return, which decouples the buffer size from outstanding traffic. Across seven dense models spanning 16-800 GB, SlipStream with a 40 MB staging buffer achieves 92.4% of the performance of an ideal HBF with HBM-like latency. H3 achieves only 43.1%, even with a 320 MB buffer. The buffer sizing of SlipStream is independent of HBF latency and workload. SlipStream with 16 MB buffer, 20x smaller than that of H3, performs within 4% of SlipStream-40MB. SlipStream also supports Mixture-of-Experts models and reaches 91.2% of ideal performance (40 MB buffer).

0.55

Potential Applications of HBF in LLM Serving Systems

cs.AR ·2026-08-13 ·Yihan Yin, Yinlun Zhao, Zhixin Yun, Guanying Wu, Feng Zhu +6 more
similarity 0.78
Abstract

LLM serving is increasingly constrained by memory capacity as model weights, KV caches, and the number of served model variants continue to grow. This report examines High-Bandwidth Flash (HBF) as a capacity-oriented extension to HBM-based serving systems. We first discuss how HBF can be integrated into the GPU memory hierarchy without undermining the bandwidth expected by the compute die. We then model the system-level value of added capacity as expanded residency for read-mostly model-state objects. Under this view, HBF can improve MoE serving by enabling more expert replicas and can improve multi-model serving by reducing model loading and supporting hot-model replication. Our simulation results show that these benefits depend on preserving the HBM-resident execution path while using HBF to expand the resident set of model weights.

0.42

SPLASH: Co-Designing Sparse Attention with High-Bandwidth Flash for Efficient Long-Context Inference

cs.AR ·2026-09-20 ·Aditya Anirudh Jonnalagadda, Agasthi Haputhanthri, Pranav Dangi, Rohan Juneja, Wenshuo Yue +3 more
position similarity 0.77
Abstract

The key-value (KV) cache has become the dominant consumer of memory in large language model (LLM) serving systems as context lengths, concurrency, and request lifetimes grow. High-bandwidth memory (HBM) provides the bandwidth attention decode needs but limited capacity, while off-package memory and storage add capacity but lack the bandwidth to sustain attention decode. High-Bandwidth Flash (HBF) is a promising substrate that combines terabyte-scale capacity with near-HBM read bandwidth. Limited write endurance makes read-only model weights its natural use, but we argue that HBF paired with HBM as a hierarchy can also hold the KV cache. Unlike prior hierarchies, whose secondary tiers are bandwidth bottlenecked, the comparable bandwidths let the two act as one logical memory for the long-context KV cache. HBF capacity enables long-context serving, and sparse attention makes it efficient by limiting KV-cache reads during memory-bound decode. Since HBF reads full flash pages and aggregates bandwidth by accessing thousands of parallel flash planes, sparse attention must be co-designed with these physical properties. We present SPLASH, an algorithm and architecture co-design that virtualizes the KV cache across HBM and HBF and adapts sparse attention to HBF's page granularity and plane-level parallelism. Across models and context lengths, SPLASH improves decode throughput per GPU by 3.5x-11.4x over the evaluated baselines under a 100 ms per-token latency objective, while keeping accuracy within 4% of dense attention across long-context suites.

0.17

HBFSim: A Simulator for Exploring HBF in Memory Hierarchies for LLMs

cs.AR cs.ET ·2026-10-16 ·Jinheng Li, Guosheng Wang, Hongchao Du, Shangyu Wu, Qiao Li +1 more
publishedcode/datahighly cited similarity 0.77
Abstract

High Bandwidth Flash (HBF) has recently emerged as a promising technology that provides terabyte-scale accelerator-local capacity at bandwidths approaching HBM, with a potential cost-per-bit advantage over HBM. However, its NAND foundation brings long latency, out-of-place updates, and finite write endurance directly into the accelerator memory hierarchy, making its effects on performance and lifetime difficult to predict. To study this emerging design space, we present HBFSim, an LLM-aware event-driven simulator for heterogeneous HBM+HBF memory systems that preserves application-level memory semantics while modeling flash-internal behavior. HBFSim models HBM, HBF with host-managed flash translation, and conventional capacity tiers in one simulation driven by a calibrated serving frontend. Using HBFSim, we study decoding of Llama-3.1-70B and Qwen3-235B-A22B under three workloads that differ in their input and output lengths. HBF serves data that does not fit in HBM 11.0--19.0$\times$ faster than host DRAM; HBM is better used to hold the running sequences' KV cache than as a cache for HBF; and at a published peak load of Llama-3.1-70B, HBF lasts 2.0 to 6.9 years, in proportion to the stacks that share the KV writes. The artifact is available at https://github.com/FlashLabAE/HBFSim and will track public HBF device data as it becomes available.

0.52

HBFlex: A Flexible Memory System for Bridging Fine-Grained LLM States and Coarse-Grained HBF Parallel Execution

cs.AR ·2026-09-16 ·Shuzhang Zhong, Weikai Xu, Yifan Zhou, Tongbin Zhao, Tenghao Zhao +5 more
similarity 0.77
Abstract

Large language models (LLMs) require increasing memory capacity to accommodate growing model weights and KV caches. High-Bandwidth Flash (HBF) offers high memory density and aggregate read bandwidth through massive plane-level parallelism, making it an attractive option for LLM serving. However, serving LLMs entirely from HBF introduces three challenges: fine-grained KV reads create placement and access imbalance, incremental writes interfere with foreground reads, and mixed KV lifetimes amplify garbage collection. Hybrid HBM/HBF designs retain HBM to support dynamic KV management, but this allocation reduces the HBF resources available under a fixed packaging budget, limiting aggregate HBF bandwidth. We present HBFlex, a full-HBF memory system with coordinated optimizations for KV reads, writes, and reclamation. HBFlex balances KV placement and attention accesses to improve plane utilization. It aggregates incremental updates and schedules writeback within sufficiently long compute windows to reduce write--read interference. It also combines lifetime-guided block packing with deferred reclamation to reduce valid-page migration. We evaluate HBFlex through trace-driven simulation across different configurations. HBFlex achieves average throughput speedups of up to 1.58$\times$ over FlashAccel and 3.30$\times$ over H3, benefiting from higher HBF bandwidth and more efficient management of dynamic KV-cache reads, writes, and erases.

0.40

Characterizing High Bandwidth Flash for LLM Serving

cs.LG cs.ARcs.DC ·2026-09-30 ·Zack Yu, Chloe Wong, Coleman Hooper, Minjae Lee, Wonjun Kang +5 more
similarity 0.76
Abstract

Large language model (LLM) serving requires substantial memory to store model weights and KV caches. As models grow larger and contexts become longer, memory capacity and bandwidth increasingly become bottlenecks for serving performance. Agentic workloads compound this pressure through repeated interactions over growing contexts, making it increasingly important to retain KV state for reuse. High-bandwidth flash (HBF) offers a way to expand accelerator memory capacity for large language model (LLM) serving, but its access costs and limited write endurance complicate its use. We evaluate HBF for high-throughput agentic serving across system design and scheduling choices to understand when additional capacity improves serving performance and energy efficiency. We introduce an HBM-HBF-host hierarchical storage system and buffered cache-aware scheduling, and use trace-driven simulations to analyze their effects on performance, energy consumption, and HBF write lifetime. Across the evaluated workloads, the fastest HBF-augmented systems reduce completion time by 36.1-87.7% relative to HBM-only systems. Modeled energy savings reach 59.1%, with benefits depending on the workload and weight placement. Buffered cache-aware scheduling extends estimated HBF write lifetime from 1.21 to 14.82 years in the evaluated configuration. These results demonstrate the importance of coordinating data placement and scheduling to improve serving efficiency while sustaining a practical HBF write lifetime.

0.25

LLM Inference in a Flash!

cs.LG ·2026-09-14 ·Sebastian Zhao, Minseo Kim, Coleman Hooper, Luca Manolache, Michael W. Mahoney +3 more
similarity 0.76
Abstract

Large Language Models (LLMs) have shown impressive capabilities across a range of natural language processing tasks, and LLM inference has emerged as a critical workload for enabling downstream applications. The demands of serving LLM inference are becoming increasingly challenging as requests shift toward longer sequences and heavier inference, driven by retrieval-augmented generation, inference-time compute scaling, and long-context applications. Additionally, these challenges are compounded by hardware trends, as memory capacity and communication bandwidth are not scaling as fast as increases in workload complexity. Compute-in-Flash is a promising solution to address memory bandwidth limitations by moving computation close to memory, and to exploit the large capacity of SSD technologies. However, it is challenging to deploy LLMs on these systems as they lack support for high-precision floating point operations and have limited write endurance. In our work, we aim to address these challenges by designing inference algorithms to enable LLM inference on Flash compute-in-memory devices. We present an end-to-end integer-only quantization approach to eliminate expensive floating-point computations. To address the limited write endurance, we design a dictionary-based KV cache compression strategy based on sparse dictionary coding that represents each KV vector as a linear combination of static dictionary vectors. These algorithmic improvements enable us to exploit the benefits of Compute-in-Flash for both model weights and KV cache, and to minimize expensive data transfer operations. Across Llama-3.1-8B and Qwen-2.5-7B, our combined method exhibits limited accuracy degradation while reducing dynamic KV cache traffic by 15$\times$.

0.38

FlashOffloading: Low-Latency KV Cache Offloading for Long-Context LLM Serving

cs.AI ·2026-11-05 ·Xuan Wang, Zhuanhao Wu, Tingzhu Fang, Xushi Li, Sicheng Zhang +15 more
code/data similarity 0.74
Abstract · 13 pages including references,13 figures

In large language model (LLM) serving systems, the key-value (KV) cache grows linearly with sequence length and concurrency, so long-context inference easily hits the high-bandwidth memory (HBM) capacity wall and results in low concurrency. Offloading the KV cache to host dynamic random-access memory (DRAM) frees HBM space and raises concurrency, but the additional cache management and host-to-device (H2D) load overhead inflates inference latency, higher concurrency fails to translate into effective throughput. We present FlashOffloading, a host-DRAM-centric inference architecture that fully offloads the KV cache in both the prefill and decode phases. FlashOffloading builds rolling HBM cache for prefill, a hot cache for decode, a reverse sparse index with zero extra miss-lookup overhead, and a compute--load overlapped kernel, optimizing KV offloading latency across the entire pipeline and delivering throughput gains under a time-per-output-token (TPOT) service-level objective (SLO). In experiments deploying GLM-5.2 with multi-token prediction (MTP3) speculative decoding on an Ascend910C prefill--decode (PD)-disaggregated platform, FlashOffloading improves prefill throughput by up to 1.38\(\times\) and decode throughput by up to 1.91\(\times\) under a 30 ms TPOT constraint. FlashOffloading is integrated into an open-source serving framework: https://github.com/vllm-project/vllm-ascend/tree/releases/v0.30.0.

0.31