CS Paper Radar

Voxel-based 3D Facies Segmentation from Seismic Data: A Comparative Study

Duc-Thanh Pham, Minh-Tan Pham, Anh Nguyen, Van Nguyen

cs.CV cs.AI ·submitted 2026-08-14 08:05 UTC · v1
benchmarkcode/data

Abstract

Seismic facies segmentation has emerged as a significant challenge in geophysics, requiring robust methods and systems to effectively identify geologically analogous facies with limited labeled data. Although existing studies have shown promising results in 2D facies segmentation, they often preprocess the original 3D seismic volumes into sets of 2D slices, typically the inline and crossline directions, and treat this problem as a purely 2D segmentation task. This simplification introduces discontinuities across slices and fails to preserve the spatial and structural continuity in 3D seismic data, thus limiting the model's ability to learn coherent geological patterns. In this work, we present a comparative and reproducible benchmark for voxel-based 3D seismic facies segmentation, built upon publicly available seismic volumes including the Netherlands F3 and the Parihaka datasets, with standardized data splits and evaluation metrics. By evaluating the three representative families of modern 3D segmentation architectures, we establish strong baseline results that highlight the potential and remaining challenges for future research in this domain.

Comment
5 pages

Closest papers

Nearest neighbours by meaning across the whole index.

DeepStratNet: A Context-Aware Coordinate Regression Framework for Seismic Horizon Tracking under Sparse Labels

cs.CV ·2026-10-01 ·Aniq Ahmad, Musham Ahmad Malik, Ahmad Mustafa, Heather Bedle
similarity 0.61
Abstract

Automatic horizon tracking is a foundational task in 3D seismic interpretation. Most existing deep learning approaches formulate it as dense semantic segmentation, typically using U-Net-based architectures. The model produces a probability map over all pixels that must be post-processed to extract precise horizon coordinates, while horizon picks in time/depth must be converted into dense masks for training. Unpicked seismic traces are consequently treated as background, which can hinder convergence, and both pre- and post-processing can introduce errors into the final interpretation. Moreover, 2D segmentation models do not inherently capture inter-slice context, while 3D models are often computationally prohibitive. We instead formulate horizon tracking as a bounded coordinate regression problem, where the model directly predicts the time/depth coordinate of the target horizon at each lateral position. We propose a lightweight regression head compatible with any pretrained vision backbone, coupled with an LSTM module to model inter-slice context and produce a continuous horizon surface across the volume. A combination of L1 and L2 losses supervises predictions at valid horizon picks, while a geology-informed regularization enforces lateral continuity between successive traces. Under controlled experimental conditions, we evaluate four pretrained vision backbones under both segmentation and regression configurations on a seismic volume from New Zealand. The proposed approach consistently outperforms its segmentation counterparts quantitatively, using metrics including RMSE and PCC, and qualitatively, while also demonstrating greater robustness to increasing sparsity of training picks. Finally, we show that prediction variation across successive traces captures local variations in geological complexity, providing an automated quality control measure for downstream seismic interpretation.

0.24

UniPro: Unified Multi-Mode Medical Image Segmentation from 2D Images to 3D Volumes via Propagation

cs.CV ·2026-10-03 ·Bangwei Guo, Yunhe Gao, Meng Ye, Yang Zhou, Difei Gu +3 more
similarity 0.59
Abstract

Medical image segmentation remains fragmented along two axes: segmentation paradigms and data dimensionality. Existing methods are typically developed separately for semantic, in-context, and interactive segmentation, and are further specialized to either native 2D images or 3D volumetric data. In clinical practice, however, segmentation workflows take many forms: a case may be initialized by semantic prediction, reference-guided segmentation, or user interaction. Regardless of how it begins, fine-grained refinement is naturally performed on 2D views; for volumetric scans, such 2D edits must propagate coherently to the rest of the volume. We present UniPro, a unified model that bridges segmentation paradigms and data dimensionality, using propagation to extend 2D segmentation to 3D volumes. Our key insight is that volumetric propagation and in-context segmentation share the same reference-conditioned prediction mechanism, differing only in whether the reference image-mask pairs come from other cases or from previously segmented neighboring slices. Building on this view, UniPro supports semantic, in-context, interactive, and propagation-based segmentation within a single slice-based framework, using class priors, reference exemplars, user clicks, and neighboring-slice predictions as mode-specific conditioning inputs. To improve propagation reliability, UniPro further incorporates bidirectional and 3D supervision to regularize slice-wise propagation beyond per-slice losses. Extensive experiments across diverse modalities and anatomies show that UniPro achieves strong performance across all segmentation settings, enabling annotation-efficient 3D segmentation from sparse 2D initialization and reducing slice-by-slice correction effort.

0.13

Depth-progressive 3D seismic velocity model building via 2D generative diffusion models

cs.AI physics.geo-ph ·2026-10-10 ·Shijun Cheng, Randy Harsuko, Mohammad H. Taufik, Tariq Alkhalifah
benchmark similarity 0.58
Abstract

Three-dimensional (3D) velocity model building (VMB) remains computationally challenging with conventional approaches and native 3D neural networks, largely due to the prohibitive memory and training cost of full 3D formulations. Therefore, we introduce a depth-progressive framework that achieves 3D VMB using 2D generative diffusion models through a depth-as-channel formulation, in which the depth dimension of each 3D velocity patch is mapped to the channel dimension of a 2D U-Net. This allows the model to synthesize overlapping depth patches sequentially from shallow to deep while conditioning the prediction of the deeper patch on the shallower one, as well as on any available geophysical constraints, including well logs and structural attributes. During training, paired shallow-deep patch pairs with randomized overlaps are used to teach the network how deeper velocity structures relate to shallower information, and a classifier-free guidance strategy enables the model to handle missing constraints gracefully. At inference, starting from a shallow velocity prior, the model recursively generates deeper patches in a top-down manner, and a depth-attenuated Gaussian blending scheme merges overlapping predictions into spatially coherent 3D volumes while accounting for the progressive accumulation of uncertainty at greater depths. Numerical experiments on both in-distribution benchmark models, including Overthrust, SEAM Arid, and SEG/EAGE, and the out-of-distribution Marmousi model demonstrate that the method effectively propagates shallow velocity priors downward and produces high-quality 3D velocity volumes across a range of geological settings and conditioning scenarios. Compared to a 3D benchmark of equivalent architecture, the proposed method significantly reduces parameter count, training cost, and inference cost, while maintaining superior VMB accuracy.

0.18

MANTLE: A Framework for Adaptive In-Situ Planetary Perception Using a Modular Uplink Principle

cs.CV ·2026-08-28 ·Pranav Durai, Gary Doran
similarity 0.58
Abstract · 10 pages

Planetary surface exploration missions rely increasingly on autonomous robotic platforms capable of interpreting complex terrain to ensure safe navigation, enable targeted science, and improve operational efficiency, as demonstrated across past Mars missions from Viking through Perseverance. Among the key perception capabilities, landform classification provides contextual information for landing site selection and scientific analysis, while boulder segmentation supports hazard assessment and path planning. This paper presents MANTLE, a multi-task adaptive network for terrain and landform extraction. The model uses a shared DINOv2 backbone for high-level feature extraction with task-specific heads: a classification head for large-scale landform classification, and a segmentation head for pixel-wise boulder localization, each trained on curated datasets built respectively from HiRISE orbital imagery and MSL surface-level imagery. The classification head achieved a test accuracy of 92.56% across seven Martian terrain classes, while the segmentation head achieved a validation IoU of 0.753 and showed strong cross-sol generalization on a held-out test set from previously unseen rover traverses. A key advantage of MANTLE is its modular, extensible design, formalized here as the Modular Uplink Principle: only a shared, frozen backbone needs to remain onboard, while subsequent perception capabilities are trained on Earth as lightweight task-specific heads and uplinked without retraining the full model. This work demonstrates two such high-impact capabilities, terrain classification and boulder segmentation, as an initial realization of a framework built to support many more over a mission's lifetime. With this foundation, future explorers need not arrive on Mars fully formed, but can continue to learn, adapt, and grow more capable with every uplink.

0.21

Confidence-Aware Teacher-Student Distillation for 3D Medical Segmentation

cs.CV ·2026-09-20 ·Georgios Triantafyllou, Dimitris K. Iakovidis
theory similarity 0.57
Abstract

Medical image segmentation models typically rely on large amounts of densely annotated volumetric data, limiting their scalability across tasks and imaging modalities. This work addresses the challenge of predicting entire 3D anatomical structures from extreme annotation sparsity. An annotation-efficient student-teacher framework is proposed for automatic 3D medical segmentation that requires only a set of point prompts on a single 2D slice per volume, as input. A foundation model serves as an offline teacher, utilizing the provided point prompts from the selected slice to full-volume pseudo-annotations alongside their corresponding spatial confidence scores prior to student training. To mitigate the error propagation of noisy pseudo-annotations, a task-specific 3D student network is trained using a confidence-aware optimization strategy. By leveraging the teacher's pre-computed confidence scores, this strategy explicitly excludes statically uncertain regions of the pseudo-annotations from the loss calculation, while simultaneously emphasizing regions with higher confidence. Evaluated on 3D cardiac MRI datasets, our framework outperforms state-of-the-art semi-supervised methods, improving segmentation performance by up to 43.6%. Furthermore, it drastically reduces the manual annotation burden to just a few positive point prompts per volume, while improving surface boundary precision by up to 14.7% over the teacher and successfully recovering up to 34.1% of the performance gap toward the fully supervised upper bound.

0.22

GuidedSAM-Plume: An Expert-Guided Segmentation Framework for Volcanic Plumes

cs.CV ·2026-10-21 ·Taddeo D'Adamo, Simon Thivet, Catherine Pothier, Riccardo Simionato, Allan Fries +4 more
publishedcode/data similarity 0.56
Abstract

Quantitative analysis of environmental phenomena increasingly relies on image-based measurements. In volcanology, the geometric characterization of volcanic plumes and clouds from RGB images remains hindered by the scarcity of dedicated segmentation solutions and partially handcrafted annotations remain widely prevalent. We present GuidedSAM-Plume, an open-source expert-guided framework tailored for the interactive segmentation of volcanic plumes and clouds. It leverages the zero-shot, spatial prompt-based capabilities of SAM2. The framework was thoroughly validated on a challenging dataset through dedicated segmentation metrics and field-relevant volcanological descriptors. From minimal user inputs, it is able to significantly increase performance compared to fully automatic dedicated solutions while preserving the reliability of derived volcanological parameters. The absence of retraining requirements lowers adoption barriers within the volcanological community, and the framework's demonstrated suitability for complex, diffuse plume-shaped phenomena extends its applicability to broader environmental science domains. The re-annotated dataset, produced under the guidance of expert volcanologists within the proposed framework, ultimately yields a more standardized release. The framework and accompanying dataset are made available at https://github.com/tad-damo/GuidedSAM-Plume.

0.55

Pixel-wise Planarity for High-Precision Monocular Plane Segmentation

cs.CV ·2026-09-04 ·Ahmetcan Yavuz, Alpay Ozkan, Rémi Pautrat, Shaohui Liu, Marc Pollefeys
top venuecode/data similarity 0.56
Abstract · To appear at ECCV 2026. Code available at https://github.com/alpayozkan/PixelwisePlanarity

Plane segmentation from a single RGB image remains challenging due to imprecise region grouping and geometrically inconsistent supervision, often leading to over-segmentation and false planar detections. We propose instead a pixel-wise planarity prediction framework for robust monocular plane segmentation. Building on a pretrained monocular geometric backbone predicting depth and surface normals, we introduce a dedicated planarity head that estimates per-pixel planarity confidence. During inference, predicted depth, normals, and planarity are combined in a lightweight region-growing procedure that enforces geometric consistency when forming plane segments. We further analyze existing plane ground-truth annotations and demonstrate substantial geometric inconsistencies under strict distance thresholds. Across multiple datasets, our method achieves improved geometric precision and segmentation quality compared to prior state-of-the-art approaches, while improving computational efficiency. Our code and models are available at https://github.com/alpayozkan/PixelwisePlanarity.

0.57

Segmenting Geometric Textures of 3D Meshes

cs.GR cs.CV ·2026-11-06 ·Weidan Xiong, Kaijie Qu, Shihao Feng, Shunqi Fan, Rongyu Xiong +1 more
benchmark similarity 0.56
Abstract · Pacific Graphics 2026

Recognizing geometric texture patterns on 3D models is critical for applications such as heritage protection, model editing, and 3D printing. Existing 3D model segmentation methods predominantly focus on identifying high-level semantic parts, thereby failing to capture middle-level textures. While recent Vision-Language Models can perform image segmentation with appropriate text prompts, they still struggle to recognize 3D geometric textures. In this work, we present a method that segments 3D mesh models based on middle-level geometric textures. We further introduce a new geometric texture segmentation benchmark and fine-tune SAM3 accordingly. The segmented texture regions are then clustered based on DINO feature similarity and lifted from 2D to 3D. Additionally, we develop an interactive tool to enable both 3D model editing based on our segmentation results and model retrieval from the dataset based on geometric and texture similarity. Experiments demonstrate that our method significantly outperforms existing methods in segmenting geometric textures and can facilitate various applications.

0.33