CS Paper Radar

Time-Deterministic and Instruction-Dynamic Execution: A field-programmable gate array quantum-control processor

Xiaoqin Luo, Jiayun Song, Xiaolu Su

cs.AR quant-ph ·submitted 2026-08-15 11:20 UTC · v2
published

Abstract

Long-running quantum computations, including error-corrected workloads, demand instruction availability, measurement-dependent control, and calibration updates. We present Time-Deterministic and Instruction-Dynamic Execution, an FPGA quantum-control processor supporting runtime revision at both instruction and parameter levels. Dynamic Instruction Parameter Update supplies one-shot, next-match patches before parameter capture, while Dynamic Instruction Stream Overwrite provides guarded replacement, logical deletion, and out-of-line insertion in eligible future regions of a resident program. A moving fetch-visibility guard coordinates instruction updates with execution, and event commitment isolates complete descriptors for independent hardware-timed dispatch. Revision applicability depends on update timing and execution progress; deterministic service applies to committed events under the stated scheduling conditions. The Xilinx ZCU102 implementation uses a 250-MHz control core and a 425-MHz timing/update domain. FPGA-resident measurements at the registered digital interfaces confirmed programmed-cycle dispatch for all tested descriptors committed at least one timing-domain cycle before their timestamps, with downstream ready and the stated FIFO ordering conditions. Separate tests confirmed post-commit timestamp and payload invariance. The minimum all-success mapped DIPU margin was four control-domain cycles, and a replacement of L instruction words completed in L+5 update-domain cycles under continuous payload delivery. Within the tested guard-distance range, rejected DISO requests reported an error and preserved the resident path, whereas all admitted revisions tested here executed complete revised sequences. These results provide a hardware execution basis for incorporating runtime-generated sequences and parameter corrections into precisely timed quantum computations with feedback.

Comment
15 pages, 4 figures
Journal ref
Rev. Sci. Instrum. 97, 103204 (2026)
DOI
10.1063/5.0356629

Closest papers

Nearest neighbours by meaning across the whole index.

Latency-Preserving Rewrites and Translation Validation for Dynamic Quantum Circuits

cs.PL quant-ph ·2026-11-14 ·Rylan Malarchick
similarity 0.70
Abstract

A dynamic quantum circuit measures qubits during a run and chooses later operations from the outcomes. These branches make the qubits wait: the outcome must reach the classical controller, and the controller must decide. We present qlin, a compiler that reduces this waiting time. qlin moves operations out of branches without delaying the program, a property proved in Lean 4. For error-correction decoders, which branch on syndromes that are almost always zero, qlin compiles the likely syndromes into one multiway branch and keeps the original program for the rest. A cost model decides when a classically controlled gate should become a quantum-controlled gate instead. On all benchmarks, qlin checks that the compiled program computes what its source computes, and the checker is proved sound in Lean 4. At the published per-decision cost of the QICK controller (42 ns), 10 of 65 programs run at least 10% faster than the best baseline in our cost model, up to 91.2%, mostly because one multiway branch replaces a long chain of if statements. On the register-transfer logic of the QubiC controller, a compiled distance-5 repetition decoder selects its correction in 21.3 instead of 151.1 expected cycles. Timing runs on an IBM device were too noisy to confirm or reject the model's ranking.

0.28

DynaMite: Dynamic Measurement Scheduling To Accelerate Fault-Tolerant Quantum Programs

cs.AR quant-ph ·2026-11-03 ·Dongwhee Kim, Suhas Vittal, Poulami Das
similarity 0.68
Abstract · 19 pages, 18 figures

Fault-tolerant quantum computers run millions of logical cycles to perform quantum error correction (QEC). As logical operations span entire logical cycles, the logical cycle time (LCT) dictates program runtime. Qubit measurements, critical to extract parity information for QEC, are the slowest operations and account for 43-86% of LCT. Measurement latencies impact fidelity: fast measurements lower our ability to correctly classify quantum states, whereas slow measurements increase the likelihood of decoherence. Hardware providers thus calibrate measurement latencies that maximize readout fidelity per qubit and use them to schedule all measurements during program execution. However, calibrated latencies are sub-optimal for logical performance because logical cycles span multiple QEC rounds, during which data qubits are not measured. This increases LCT and logical error rates (LERs) due to decoherence at the logical level. We propose DynaMite, a lightweight real-time measurement latency selection policy built on two key insights. First, logical cycles must use a measurement latency that is fast enough to reduce both LCT and LER for the QEC code, instead of the calibrated latency that only maximizes readout fidelity. Second, not all logical cycles are equal; many do not fully utilize the error budget of the QEC code, i.e., the number of failed parity checks it can tolerate without compromising LER. These cycles could use even faster measurements but do not, because latencies are chosen statically, whereas error information is only available at runtime. DynaMite exploits the fact that a logical cycle comprises multiple QEC rounds and selects the fastest latency for an upcoming round based on the error budget left and rounds remaining. Our evaluations show that DynaMite reduces LCT by 1.69x on average and up to 2.29x, and reduces LER to 0.46x on average and up to 0.13x of baseline.

0.11

Resource-Aware Scheduling for Distributed Quantum Computing

cs.NI ·2026-10-21 ·Connor Howe, Raghav Mundada, Jake O'Shaughnessy, Ibrahim Abdullahi, Ali Anwar
similarity 0.68
Abstract

Distributed quantum computing (DQC) is a promising near-term approach for executing circuits that exceed the capacity of a single quantum processing unit (QPU). Prior work has made significant progress on circuit partitioning and reconstruction, but practical DQC requires more than cutting a circuit into smaller pieces. A runtime system must determine whether to execute the circuit intact, cut it for sequential execution on one QPU, or distribute it across multiple QPUs, while accounting for queueing, communication, reconstruction, and hardware constraints. We present a resource-aware scheduler for DQC that compares these execution alternatives at runtime using explicit models of QPU execution, communication, and host-side reconstruction, together with hardware-informed timing derived from simulated IBM QPUs. By treating communication and reconstruction as first-class scheduling costs, the scheduler selects execution plans using a more realistic view of end-to-end overhead than cutting-only approaches. Across our experiments, reconstruction accounts for over 83% of cutting overhead, distributed execution reduces P90 latency by up to 39% relative to uncut single-QPU execution, and scheduling overhead itself remains negligible, never exceeding 0.038% of end-to-end job latency. Together, these results show that DQC must be treated as a runtime scheduling problem over both quantum and classical resources, not just circuit partitioning.

0.15

QSimAdv: A Late-Bound, Vendor-Agnostic Architecture for High-Performance Quantum-Circuit Simulation

cs.DC quant-ph ·2026-08-11 ·Shusen Liu, Pascal Jahan Elahi, Wenyun Sun, Shenjin Lv, Xiaohan Shan +1 more
similarity 0.68
Abstract · 24 pages

Portability in high-performance quantum-circuit simulation need not begin at the kernel. We present QSimAdv, which makes late binding, rather than a common kernel, the basis of vendor independence. Representation, operator lowering, and data placement are bound only when their required inputs become available. Before full-state allocation, circuit, noise, and output inspection can route eligible generic sampled-count requests to a stabiliser tableau; explicitly requested representations remain fixed. For full-state execution, backend constraints shape fusion; an ordered fused operator binds to a native lowering only after its physical targets are known. A first-class logical-to-physical layout map records non-canonical order across local and rank-address bits, so the dispatcher moves nonlocal targets only on demand. GPU, CPU, and Message Passing Interface (MPI) backends share these semantics while retaining native execution paths. We realize this design on NVIDIA GH200 and AMD MI250X/EPYC systems across local and distributed execution. With matched complex 32-bit floating-point state storage, QSimAdv leads both Aer Hopper configurations at $N=32$ and Aer's HIP backend at four shared MI250X sizes from $N=24$ to 30. Strong scaling exposes platform dependence: on setonix, QSimAdv leads both GPU and CPU comparisons at every measured rank, achieving $3.4\times$ and $2.8\times$ speedups, respectively, from one to eight ranks; neither the GH200 path nor the CPU path speeds up at eight ranks. Weak scaling reaches 256 ranks with 2 TiB GPU and 1 TiB CPU states. Together, these results support that portability can reside above the kernel boundary while execution remains native and extends across distributed memory.

0.10

Architecting Instruction Execution for Scalable Fault-Tolerant Quantum Computing

cs.ET quant-ph ·2026-10-12 ·Dmitry Filippov, Justin Hogaboam, Mathias Soeken, Raghu Gatta, Prakash Murali +1 more
published similarity 0.67
Abstract · Published in IISWC 2026

Scaling fault-tolerant quantum computing (FTQC) requires orchestrating millions of operations continuously across a tightly coupled classical-quantum control stack. A critical challenge in this orchestration is determining the optimal hardware-software boundary, i.e., the Quantum Instruction Set Architecture (QISA). We focus on cryogenic, fixed-connectivity qubit platforms, such as superconducting and topological Majorana qubits. For these, existing QISA choices either operate at too low a level, violating cryogenic thermal budgets at scale, or at too high a level, imposing unrealizable complexity on the control engine. To reason about these tradeoffs, we introduce the ARIES instruction set hierarchy, which categorizes QISAs into distinct abstraction levels. To systematically evaluate these levels, we develop an end-to-end evaluation toolflow featuring a cycle-accurate classical driver and hardware engine simulator. Using eight quantum applications across superconducting and topological qubit platforms, we measure instruction bandwidth, transceiver power dissipation, and measurement processing overheads. We demonstrate that while physical-level abstractions exceed the thermal limits of dilution refrigerators by orders of magnitude, canonical-level abstractions significantly underestimate hardware routing congestion and execution runtimes. Our Level 4 QISA (local logical operations) offers an optimal architectural balance. As quantum hardware platforms scale toward FTQC in the coming years, our findings provide concrete architectural guidance for the design of their classical control stacks and instruction interfaces.

0.24

Towards Continuous Profiling and Optimization of Quantum-Classical Pipelines

cs.ET quant-phcs.OS ·2026-09-05 ·Ayush Bansal, Owen Cochell, Santiago Núñez-Corrales, Marcos Frenkel, Seetharami Seelam +2 more
similarity 0.67
Abstract

Quantum applications increasingly execute as multi-stage quantum-classical pipelines, interleaving QPU computation with classical stages like circuit generation, transpilation, layout mapping, quantum error mitigation (QEM), and post-processing. These stages have diverse resource requirements and exhibit stochastic behavior under drifting hardware noises, yet existing workflow frameworks treat them as static, isolated components. We present LLQM (Low-Level Quantum Machine), a profiling-driven meta-framework for quantum-classical pipelines. LLQM decomposes pipelines into fine-grained tasks and continuously profiles their CPU/GPU, memory, QPU, and queue dependencies alongside real-time hardware states. This unified runtime abstraction captures cross-stage resource dependencies and reveals how classical and quantum decisions interact, enabling characterization of their impact on fidelity and resource consumption. We evaluate LLQM using QEM as a representative pipeline stage, on IBM 156-qubit Heron r2 processors with circuits up to 100 qubits and 1e7 transpiled gates. Our results show that continuous profiling exposes runtime bottlenecks and enables hardware-, fidelity-, and workload-aware optimizations.

0.17

MagiCFirm: A Runtime for Magic-State Cultivation with Algorithm-Hardware Co-Design

cs.AR quant-phcs.DC ·2026-09-24 ·Jubo Xu, Abbas B. Ziad, Prakash Murali, Hongxiang Fan
code/data similarity 0.66
Abstract

Magic-state cultivation offers a promising alternative for lowering the cost of non-Clifford operations in fault-tolerant quantum computing (FTQC). However, realizing cultivation in practice exposes two challenges: (i) the lack of an open-source classical runtime layer between logical software and physical control, and (ii) the latency constraints on protocol-specific decisions that determine magic-state readiness. To address these challenges, we adopt an algorithm--hardware co-design approach. At the algorithm level, we develop a two-stage early-escape scheme that identifies an informative subset of detectors offline, constructs a compact decoding problem, and performs partial decoding in parallel with complete decoding at runtime, allowing high-confidence attempts to advance before full decoding completes. At the hardware level, we present MagiCFirm, a configurable runtime that combines offline-compiled microprograms with dedicated datapaths for detector construction, event processing, and protocol control, enabling end-to-end execution of magic-state cultivation. Across evaluated configurations, MagiCFirm reduces wall-clock magic-state preparation time by up to 39.3% at matched logical error rate. For a representative magic-state-bound workload, this translates to an estimated 11% reduction in overall application runtime.

0.20

FTWeave: Composing Logical Execution, Real-Time Decoding, and Magic-State Supply in Tightly Integrated Quantum-Classical Systems

cs.PF quant-ph ·2026-10-17 ·Panayiotis Christou, Shuwen Kan, Ying Mao
similarity 0.66
Abstract

Fault-tolerant quantum applications depend on both decoded measurement information and a continuing supply of magic states. While an operation waits for either, its logical data require protection that produces more syndrome data and decoding work. Architects must provision the quantum and classical parts of the machine together, before complete systems are available to measure. FTWeave is a system-level simulator for this architectural exploration. It accepts OpenQASM 2/3 circuits, CUDA-Q Logical compiler artifacts, Stim circuits, and provider-derived physical inputs through adapters that preserve operation and measurement dependencies. Users bind these inputs to quantum resources, classical processors, memory, communication, and factory configurations. One event timeline determines application progress, resource ownership, and continuing protection. This supplies the system model needed to connect circuit and decoder evidence to application performance. Controlled demand studies and complete multiplier and Ising circuits show why the coupling changes provisioning decisions. A fixed-work approximation predicts a 3.55x multiplier speedup from additional factories where the coupled model gives almost none. Explicit ownership also changes useful capacity: increasing decoder workers alone has no benefit in a storage-constrained case, while increasing workers and feedback entries together gives 4.93x speedup. Selected color and hypergraph-product code mappings take 53-90% longer under decoder service variability, despite an unchanged mean. These comparisons identify useful resource combinations and distinguish protection work from the elapsed lifetime of quantum data.

0.25