CS Paper Radar

ReForce: Learning Force-aware Retargeting for Dexterous Manipulation

Yuhang Wu, Lingqi Zeng, Changwei Jing, Jianglong Ye, Xiaolong Wang

cs.RO ·submitted 2026-08-16 06:13 UTC · v1

Abstract

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

Closest papers

Nearest neighbours by meaning across the whole index.

Dexterous Robot Manipulation from Human Demonstrations via Contact-Anchored Retargeting and Residual Policy Learning

cs.RO ·2026-09-21 ·Zihao Yang, Chengyuan Liu, Yu Zhou, Runze Lv, Tianyu Cui +4 more
code/datahighly cited similarity 0.83
Abstract · 16 pages, 6 figures, 5 tables. Technical report. Code: https://github.com/DexGEM-Lab/real2sim2real

Learning dexterous manipulation from demonstrations is bottlenecked by data: the contact forces that determine whether a grasp succeeds are absent from every scalable source of human demonstrations. This paper builds on two observations. First, what survives the change from a human hand to a robot hand is the contact structure of a demonstration - which finger regions touch which object locations, and in what order - rather than its joint motion. Second, physical consistency need not be engineered per task: a single residual reinforcement learning (RL) policy, trained once across diverse demonstrations, can repair kinematic recordings into physically consistent, contact-annotated trajectories, and the same residual formulation restores dynamic feasibility after retargeting. These observations yield a three-stage pipeline that converts human motion-capture recordings into dexterous robot policies with no real-robot training data: physics refinement with a simulated MANO hand recovers contacts and forces, contact-anchored retargeting transfers the demonstrated contact structure through an objective independent of hand morphology, and residual policy learning adapts the result to robot actuation. The pipeline reconstructs 25,454 single-hand trajectories (success 7.3% -> 59.3%) and 25 dual-hand tasks (16.0% -> 62.4%) with one shared policy per setting, transfers one human dataset to four morphologically distinct robot hands (+62.4 pp), and executes four contact-rich bimanual tasks on physical hardware with zero real-robot training data.

0.60

Contact Imitation Interface: Transferring Dexterous Skills by Showing How Contact Unfolds

cs.RO ·2026-10-29 ·Zhixuan Xu, Yichen Li, Bingchen Wu, Rui Wang, Yiwen Hou +3 more
similarity 0.82
Abstract · 15 pages (8-page main paper and 7-page supplementary material). Project website with code and hardware designs: https://nus-lins-lab.github.…

Robot-free human demonstrations offer a promising route to scaling dexterous manipulation data. The key challenge is to preserve the demonstrator's natural dexterity while producing contact-grounded observations and actions that transfer to robot hands. We present Contact Imitation Interface (CIMI), a framework with contact-grounded demonstration and learning interfaces. The demonstration interface combines shared contact geometry and fingertip RGB views with contact-alignment-first retargeting and reprojection of wider scene views. The learning interface introduces a hierarchical policy in which a contact-surface planner predicts relative contact-surface trajectories and a controller coordinates wrist and finger commands to improve contact alignment. CIMI combines contact-grounded observations, retargeting, and action representations, improving mean final-stage success by at least 50 percentage points over baseline policies across six hand-task pairs on LEAP and Wuji. Hardware designs and software are publicly available.

0.21

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.81
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.81
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39

FoLD: Force-Informed Learning for Dexterous Articulated Object Manipulation

cs.RO ·2026-09-27 ·Haowei Shen, Tingai Li, Yumeng Liu, Wenyuan Guang, Xuanze Yang +4 more
benchmarkcode/data similarity 0.81
Abstract · Project Page: https://gghgghgghgg.github.io/FoLD-project-page/

Transferring human demonstrations to dexterous robots remains challenging because differences in hand morphology and contact dynamics often cause retargeted motions to fail at producing the intended object behavior. We present \textbf{FoLD}, a framework for learning dexterous manipulation of articulated objects through explicit force guidance. FoLD compute compensatory force fields from human demonstrations together with the robot's current interaction state, yielding a force prior that promotes the demonstrated object motion. This force prior informs a residual policy that adapts retargeted hand motions to the contact requirements of the task. We evaluate FoLD on a public benchmark for articulated object manipulation, where it consistently outperforms state-of-the-art baselines across tasks and embodiments. We further validate FoLD on real dexterous robot platforms, demonstrating successful transfer of human manipulation skills to robot execution. Here is the link of our project page: https://gghgghgghgg.github.io/FoLD-project-page/.

0.29

Kinematic-Tactile Aligned Dexterous Retargeting with Contact Wrench Space Alignment

cs.RO ·2026-10-29 ·Xinyuan He, Ziheng Xu, Yueyuan Chen, Yufan Ye, Yuanshuo Tan +4 more
similarity 0.81
Abstract · 8 pages

Human demonstrations provide a natural and scalable source of data for learning dexterous manipulation policies. However, existing retargeting methods primarily transfer human kinematics, while the tactile information underlying physical interaction is rarely preserved across embodiments. To address this limitation, we present a hierarchical three-stage framework for kinematic-tactile aligned dexterous retargeting. We use object-centric contact wrench space as a physical representation for tactile alignment between human and robot hands. The framework first aligns hand kinematics and contact geometry, and then constructs a human wrench support profile from tactile forces and contact geometry. Robot fingertip force targets are subsequently optimized to cover the human wrench support and converted into joint position corrections, yielding directly replayable robot hand trajectories. We evaluate the framework in simulation and real robot experiments across three pouring conditions. In the real robot experiments, our method achieves a 96.7\% replay success rate and higher wrench transfer fidelity than representative retargeting baselines. The framework enables physically grounded transfer of kinematic and tactile information from human demonstrations to robot hands, providing a path toward scalable learning of contact-rich dexterous manipulation.

0.14

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.81
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Touch2Robot: Robot Touch in the Human Demonstration Loop

cs.RO cs.AI ·2026-09-21 ·Shengcheng Luo, Xiaoyang Cheng, Hong Ying, Xiaoying Zhou, Jiaming Jiang +4 more
similarity 0.81
Abstract · 12 pages, 13 figures

Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.

0.52