CS Paper Radar

Some Modifications to Our End-to-End UAV Planner

Junjie Lu, Bailing Tian

cs.RO ·submitted 2026-08-16 13:39 UTC · v1

Abstract

The one-stage planner YOPO maps a single depth image and the robot state directly to a set of candidate trajectories, trained by backpropagating through differentiable trajectory costs. This yields dense, geometrically informative supervision, but inherits the pathologies of soft-constrained optimization: the safety cost competes with the smoothness and goal-reaching terms, is non-convex across homotopy classes, and the single-piece polynomial is limited in expressiveness. In this report, we summarize several effective modifications. We adopt a two-piece MINCO parameterization, trading time for smoothness without altering the trajectory's spatial profile. We further lift YOPO's multi-modal prediction to span distinct homotopy classes, treating each motion primitive as a homotopy anchor that confines the trajectory to a feasible basin - without explicit safe-flight-corridor construction or front-end search. For dynamic feasibility, we impose barrier penalties on velocity and acceleration together with a curvature-dependent speed limit whose gradient acts only on the velocity, producing an adaptive-speed behavior that decelerates in cluttered regions or sharp turns. We replace score regression with a ranking loss, preventing small score errors from reordering the candidate set. These yield richer trajectory representations, safer obstacle avoidance, and more direct flight paths.

Closest papers

Nearest neighbours by meaning across the whole index.

NMPP: Nonlinear Model Predictive Planning for Agile UAV Flight in Cluttered Environments

cs.RO ·2026-10-06 ·Ondřej Procházka, Juraj Pauko, Robert Pěnička, Martin Saska
similarity 0.72
Abstract

Flying a quadrotor through a cluttered environment requires not only planning a collision-free reference trajectory based on perceived obstacles, but the reference also needs to be dynamically feasible and within the actuation limits of the vehicle, so that the controller can track it precisely. Existing methods either optimize a smooth polynomial inside a convex corridor, which limits agility, or treat obstacles as soft costs traded against tracking performance. We propose a Nonlinear Model Predictive Planning (NMPP) that imposes perceived obstacles as hard geometric constraints and hands a full-state reference to an obstacle-blind SE(3) controller. Our planner achieves a 58-67 % lower position RMSE than a linear Model Predictive Control trajectory planner and a 41-70 % lower RMSE than a polynomial trajectory planner. It also completes all forest flights with up to 9.5 m/s speed without collisions, and achieves 86 % flight success rate under a more aggressive speed profile where a state-of-the-art planner has only 26 % success rate. The real-world deployment showed reliable execution flying up to 5.5 m/s in an unknown cluttered environment.

0.19

Trusted Polytopic Action Sets for Fast Planning in Underactuated Systems

eess.SY cs.RO ·2026-08-25 ·Akshay Jaitly, Siavash Farzan
publishedbenchmarkcode/data similarity 0.70
Abstract · Accepted for publication in IEEE Control Systems Letters (L-CSS); to be presented at the 2026 IEEE Conference on Decision and Control. Code …

Underactuated systems pose a challenge for convex motion planning because their dynamically feasible motions lie on a manifold of trajectories in function space. Building on our earlier formulation of polytopic action sets (PAS), this paper presents a method for rapidly generating, online, trusted convex sets of short-horizon actions for underactuated and potentially nonlinear systems. Around a nominal trajectory, we construct local finite-dimensional action coordinates in which each parameter vector encodes a complete nearby motion through an affine trajectory map, rendering collision-avoidance and control bounds linear. To remain consistent with the nonlinear dynamics, we introduce a dynamics-violation metric and extract a trusted convex inner approximation using an IRIS-inspired inflation procedure directly in action space. The resulting PAS are reusable convex families of actions that can be queried and composed with linear programs, and a PAS-guided tree expansion treats nodes as composed reachable families rather than single trajectories, coupling local nonlinear fidelity with convex reuse for longer-horizon planning. The planner solves cluttered planar scenes in tens of milliseconds (14-78x faster than a kinodynamic RRT baseline) and reduces terminal error on a nonlinear underactuated benchmark by 26-86% over sampling and NLP baselines.

0.50

Accelerating Optimization over Graphs of Convex Sets via Neural Network Approximations

cs.RO ·2026-08-15 ·Ananya Trivedi, Sarvesh Prajapati, Zhexin Xu, Mohamed Khalid M Jaffar, David Rosen +1 more
code/data similarity 0.69
Abstract

Motion planning problems such as collision-free navigation and contact-rich manipulation can be naturally formulated as optimization problems that couple discrete decisions with continuous trajectories. The Graphs of Convex Sets (GCS) framework offers a practical solution to these problems. It represents discrete decisions as nodes of a graph and encodes continuous trajectories in the edges connecting them. However, the resulting optimization subproblems can become computationally prohibitive for online replanning. In this work, we propose a learning-based strategy to mitigate this limitation. Specifically, we replace the costly convex relaxation step required by nominal GCS with a single forward pass through a Graph Attention Network that predicts a set of highly probable candidate paths through the graph. A lightweight ranking network then orders these candidates by their estimated trajectory cost. Evaluating them in this order, we terminate our search early while still recovering a near-optimal motion plan. We validate the resulting pipeline across diverse robotic tasks, including collision-free motion planning for a 3D quadrotor and a 7-DoF manipulator, and planning through contact for planar pushing. Across both convex and non-convex cost and constraint settings, our approach yields up to two orders of magnitude speedup over nominal GCS while maintaining a 100% success rate, at the cost of some suboptimality in the recovered solutions. Code implementations and video demonstrations can be found at https://neural-gcs.github.io/.

0.20

Continuous-Time Motion Planning and Steering with Global Convergence

cs.RO ·2026-10-22 ·Mohsen Amiri, Sima Didari, Davoud Ataee Tarzanagh, Hankyu Moon, Yeongdae Kwon
benchmark similarity 0.69
Abstract

Motion planning is central to robotics, and it is increasingly used to correct the motions proposed by learned planners and policies. In both uses, constraints must hold at every instant of the motion, not only at sampled times. To our knowledge, no algorithm provably converges to a globally optimal motion once a smoothness cost is combined with such constraints. We cast planning and steering as a single continuous-time program: robots avoid one another and static or moving obstacles, and a learned proposal is steered by keeping the motion close to it. The program is elementary to state, yet nonconvex. We propose GlobMP (Global Motion Planning), a gradient projection method over piecewise-polynomial curves, on which each constraint is one polynomial per piece that must stay nonnegative over the whole motion; it alternates cost reduction with feasibility restoration. Under mild assumptions, we show that, from a fine grid start, its cost approaches the global optimum as the number of polynomial pieces grows, with every constraint met to any chosen tolerance, or exactly on stable instances. We demonstrate its superior performance over strong baselines in real and synthetic experiments, including teams of up to $200$ robots, multi-robot planning on the Robotarium testbed and an extended benchmark, maze navigation, and steering tactile-reactive policies on a bimanual humanoid.

0.16

LLM-guided Planar Loco-Manipulation for Quadruped Robots

cs.RO cs.LG ·2026-10-29 ·Georges Jetti, Michael Khayyat, Jean-Pierre Sleiman, Stefano Arrigoni, Francesco Braghin
similarity 0.69
Abstract · 20 pages, 9 figures, 15 tables. Includes appendix

Robotic navigation typically assumes a collision-free route to the goal exists; in cluttered environments with movable obstacles, however, reaching the goal may require physical interaction. Classical solutions encode these behaviors through geometric rules and task-specific logic, while learning-based approaches often constrain the decision space to low-dimensional motion commands or predefined action sets. We instead consider a broader decision space, jointly selecting the skill, relevant object, and geometric target. Our language-conditioned task planner, fine-tuned with LoRA on synthetic data, maps natural-language tasks and a structured scene representation to variable-length sequences of parameterized actions, executed by low-level reinforcement-learning policies. The planner learns the geometric relations underlying interactive navigation and outperforms a classical planner and a prompted frontier model on interactive navigation tasks. Comparisons with models trained from scratch indicate that composition does not require pretraining when the representation is structured, whereas pretraining yields more reliable geometric targets. At the low level, we introduce an end-to-end whole-body planar pushing policy that achieves a 93.3% success rate in simulation, versus 83.5% for a hierarchical baseline, while reducing completion time by more than 60%. On hardware, the hierarchy yields the correct skill composition in 44/45 trials and end-to-end success in 34/45. Project website: https://anonymousprojects-dev.github.io/LLM-guided-LocoManipulation-Quadrupeds/

0.27

OmniRisk: Omnidirectional Trajectory-Risk Learning for Agile Quadrotor Dynamic Avoidance

cs.RO ·2026-09-16 ·Yifan He, Yang Liu, Wenhao Zhao, Hai Lin, Deping Zhang +6 more
code/data similarity 0.69
Abstract · 8 pages, 5 figures, 6 tables

Agile quadrotor avoidance of fast-moving obstacles requires anticipating collisions and selecting feasible maneuvers within short reaction windows. Reliable predictive avoidance remains challenging because sparse range observations do not directly reveal obstacle motion, while online trajectory optimizers either scale poorly with obstacle count or remain efficient at the expense of reliability in dense, high-speed encounters. We present OmniRisk, an omnidirectional planning framework that learns trajectory-level risk offline for efficient onboard evasion. A fixed-dimensional tensor combines LiDAR range panoramas, dynamic masks, and Cartesian surface velocities to represent geometry and motion jointly. We formulate an asymmetric risk field aligned with obstacle velocity that emphasizes approaching interactions and attenuates receding ones. Accumulating this risk along predicted relative trajectories provides dense supervision and discourages unnecessary hesitation after obstacles pass. A dual-branch circular convolutional network predicts terminal boundary states and dynamic risks for candidate primitives over an omnidirectional anchor lattice in a single forward pass, followed by selection and closed-form reconstruction of the selected candidate primitive. This formulation removes online risk accumulation along trajectories and makes risk-inference cost independent of obstacle count. OmniRisk enables efficient onboard avoidance, with real-world flights demonstrating consecutive evasive maneuvers at relative encounter speeds up to 15 m/s without fine-tuning. Code is available at https://github.com/VANdexj/OmniRisk.

0.37

Dream What I Can: Sparse Visual Planning for Long-Horizon Robot Manipulation

cs.RO ·2026-10-18 ·Chongkai Gao, Wenlong Huang, Haonan Chen, Lin Shao, Yilun Du +3 more
similarity 0.68
Abstract

Video models provide rich priors for generalizable robotic manipulation, but plausible visual futures are not always executable. We introduce DreamCan, a hierarchical policy that grounds video models through sparse visual planning: a high-level planner adapted from a pre-trained video model and a low-level visuomotor policy. Rather than predicting dense trajectories, the high-level planner generates sparse visual subgoals that balance reachability and task utility. From offline, action-free robot videos, we estimate these quantities and use dynamic programming to select subgoal sequences without manual annotations. The resulting subgoals are more reliably attained than uniformly spaced alternatives, and the full system outperforms language, dense-video, and uniform-subgoal planners, reaching high planning success rates on Language-Table tasks and 91.2% success on LIBERO-Long with a 0.1B-parameter low-level policy. Additional suboptimal videos and test-time compute further improve success. The system also performs challenging real-world bimanual tasks, including box folding and packing with unseen object combinations. More results are available at https://dreamcan.github.io/.

0.22

Control-Geometry Straightening for Sampling-Based Latent Planning

cs.LG stat.ML ·2026-09-28 ·Ziang Fu, Ning Ning
similarity 0.68
Abstract

Joint-embedding predictive architectures enable planning with latent world models, but accurate transition prediction alone does not ensure that the planning objective is easy to optimize. We introduce Control-Geometry Straightening (CGS), a single auxiliary loss that learns planner-friendly representations by directly straightening control geometry for sampling-efficient planning. CGS matches pairwise cosine similarities among actions to those among corresponding latent differences only using local transitions from pixel-action pairs. The loss can be applied across world-model architectures using end-to-end learned or pretrained representations. Under linear-dynamics, our theoretical analysis connects this objective to temporal straightening and more balanced terminal-cost curvature across the full planning horizon, yielding finite-budget guarantees for MPPI, local contraction results for CEM, and convergence bounds for gradient descent. Across four control environments and multiple planners, CGS improves planning with fewer sampled candidates and refinement steps, achieving success-rate gains up to 20 and 12.6 percentage points over LeWorldModel (LeWM) and its temporal-straightening variant (LeWM+TS), respectively, with sampling-based planners using 128 candidates per update. Probes, comparisons with DINO-WM architecture, and planner-side ablations clarify how latent motion organization, state dependence, and dynamical context shape planning behavior. Straightening control geometry thus makes good action sequences easier to find under limited planning budgets.

0.16