CS Paper Radar

Tactile Sim2Real without Tactile Simulation via Bottlenecked Latent Reconstruction

Fan Yang, Youngsun Wi, Jinhao Yu, Nima Fazeli, Dmitry Berenson

cs.RO ·submitted 2026-08-16 19:09 UTC · v3

Abstract

Robot sensor designs, particularly tactile sensors, are highly diverse and evolve rapidly. Modeling each sensor in simulation demands substantial domain expertise and computational approximations can degrade the fidelity of the simulated signals. We propose Sim2Real via Bottlenecked Latent Reconstruction (SBLR), a framework that avoids sensor-specific simulation entirely by (1) training policies on a simulator-native oracle sensor that is easy to construct without modeling any particular sensor (e.g. we use a point-cloud and finger-tip forces as a tactile oracle), and (2) aligning real sensor latent embeddings to those of the oracle sensor at inference time. Policy training proceeds in two-stage: the policy first learns from the oracle sensor latents, then a bottlenecked latent reconstruction adapts it to the information loss expected when using the real sensor instead of the oracle. The alignment between oracle and real sensor is learned from unpaired random-play data collected in both simulation and the real world, using rectified-flow-based transformation networks trained on nearest-neighbor pseudo-pairs. Simulation experiments on three contact-rich tasks show that SBLR matches or approaches the performance of an oracle with direct access to tactile simulation. Hardware experiments on Peg Insertion and Gear Meshing with GelSight Mini and DIGIT sensors demonstrate 85-97.5% zero-shot success without requiring any sensor-specific modeling or calibration, outperforming a physics-based tactile simulation baseline by 7.5-15%.

Closest papers

Nearest neighbours by meaning across the whole index.

TACROSS: An Efficient and Low-Cost Scalable Human Touch System Across Heterogeneous Tactile Sensors for Dexterous Robot Learning

cs.RO cs.LG ·2026-10-08 ·Bo Chen, Huanzhang Hu, Junyang Ma, Bo Yue, Fangdi Yu +9 more
code/data similarity 0.73
Abstract

Collecting tactile demonstrations on robots is costly and slow, motivating the use of lower-cost human tactile gloves for scalable data collection. However, human capacitive/piezoresistive gloves and robotic tactile sensors differ fundamentally in transduction principle, sensor layout, spatial resolution, and dynamic response, making alignment of raw sensor channels ill-posed. To address this problem, we present TACROSS, a scalable system for learning from human touch and transferring it to robots that bridges this heterogeneity by aligning tactile streams at the level of contact events rather than raw sensor values. The hardware component of TACROSS integrates a piezoresistive glove with five layers and a cost of USD 10.86 with 285 sensing points. To align contact semantics, we design canonicalizers and residual adapters that map heterogeneous signals into a shared tactile latent with 256 dimensions via a temporal Transformer with attention across fingers. We further introduce a robot-grounded policy learning scheme in which robot demonstrations provide the sole source of ground-truth action supervision, while human demonstrations support tactile representation learning and provide confidence-weighted auxiliary supervision through valid retargeted hand targets. We evaluate our system on four contact-rich manipulation tasks. Compared to conventional teleoperation, our proposed system achieves a 3.5-fold efficiency improvement while reducing demonstration acquisition equipment cost by 95.7%. We will open-source the TACROSS hardware and software system and publicly release a tactile dataset comprising over 150 hours of recordings. Project page: https://tacross-touch-project.github.io/.

0.23

Factorized Tactile Representation and Control for Sim-to-Real Manipulation

cs.RO ·2026-10-07 ·Siqi Shang, Bianca Aumann, Tye Brady, Joshua Migdal, Taskin Padir
similarity 0.72
Abstract · 8 pages, 7 figures

Tactile sim-to-real learning must bridge simulated contact and device-specific sensor responses while preserving information needed for control. We propose a factorized tactile representation and control framework that maps normal force and contact patch to an effective contact response recoverable from sensor readings. The response is separated into contact geometry, force distribution, and temporal contact change, with representation-specific encoding and randomization. A Tactile Gated Policy preserves these representations separately through control and operates over all mask configurations without retraining. We evaluate the approach through response reconstruction, spatial alignment, force regulation, and contact-rich adversarial peg insertion in simulation and the real world, enabling the utility and transfer reliability of different tactile representations to be assessed independently. The approach achieves <1 mm contact localization, 1.69 N force-tracking error on unseen geometries, and a 35% improvement in real-world adversarial peg insertion over the unfactorized response, with different tactile representations benefiting different interactions.

0.18

OpenViTac: Learning and Benchmarking Visuo-Tactile Policies in a Unified Sim-and-Real Framework

cs.RO ·2026-10-07 ·Yifan Wu, Qin Li, Nan Min, Guojin Zhong, Haoyu Zhao +12 more
benchmark similarity 0.71
Abstract · Project website: https://fvl-repo.github.io/OpenViTac/

Tactile feedback provides embodied agents with physical information beyond visual observations, enabling more reliable interaction with the real world. However, despite the rapid progress of vision-tactile-language-action (VTLA) policies, there remains a lack of unified benchmarks for evaluating tactile-enabled robot manipulation across simulation and the real world. To address this gap, we introduce OpenViTac, a visuo-tactile manipulation benchmark for evaluating robot policies across simulation and the real world. OpenViTac organizes contact-rich manipulation into four tactile-relevant capability dimensions and provides paired simulation-real-world settings for consistent evaluation of VLA, WAM, and VTLA policies. Building upon this benchmark, we investigate how different tactile representations and integration strategies affect the performance of pretrained VLA models. Correspondingly, we introduce OpenVTLA, a tactile augmentation framework that combines the best-performing representation and integration strategy. Furthermore, we leverage the paired benchmark setting to study sim-real co-training and analyze factors affecting cross-domain policy learning. Together, OpenViTac provides a unified platform for evaluating and advancing visuo-tactile robot manipulation.

0.48

TacMind: Benchmarking and Modeling Tactile Interaction States for Robotic Manipulation

cs.RO ·2026-10-30 ·Jiaxin Shi, Zibin Wu, Yichi Zhang, Jianghua Duan, Siyu Zhu +1 more
benchmarkcode/data similarity 0.71
Abstract · Project Page: https://tacmind-bench.github.io/

Tactile sensing provides robots with direct observations of contact physics, local geometry, and interaction dynamics, making it a vital source of feedback for contact-rich manipulation. However, existing tactile manipulation studies are often developed and evaluated within specific task settings, making it difficult to systematically compare how tactile information contributes under different interaction conditions. In this work, we develop a benchmark in simulation comprising 128 tasks organized around three complementary evaluation regimes: Precise, Recognition, and Dynamic. The benchmark further includes controlled static and dynamic task variants and 12 perturbation settings for evaluating robustness under changes in visual and physical conditions. These settings motivate studying tactile information as a temporally evolving interaction representation rather than only as an instantaneous observation. We therefore propose an action-conditioned latent predictive world model that integrates tactile history and learns a tactile state through prediction of future tactile latents. Building on this representation, we design a model that conditions action generation on the learned tactile state and uses predicted future tactile information to refine candidate actions through predictive tactile reflection. Experiments on the proposed benchmark show consistent gains from incorporating tactile information across the evaluated regimes. Project Page: https://tacmind-bench.github.io/

0.42

TaF-Foundation: Wrench-Grounded Cross-Sensor Tactile Representations

cs.RO ·2026-11-16 ·Jiaming Jiang, Yuzhe Huang, Baokun Yang, Hao Liang, Li Gao +6 more
benchmarkcode/data similarity 0.71
Abstract · 17 pages, 6 figures, including supplementary material

Tactile sensing is essential for contact-rich manipulation, yet heterogeneous sensing mechanisms and observation formats hinder cross-hardware transfer. Since physical contact is governed by Newtonian mechanics, we ground tactile representations in six-dimensional wrenches, establishing a common physical reference across sensing mechanisms. Specifically, we pair tactile observations from all sensors with wrench measurements, enabling shared physical supervision without requiring direct tactile-to-tactile pairing between sensors. To support learning at scale, we develop a dedicated acquisition platform and collect over 100 million paired tactile observations and wrench measurements from 24 sensors spanning four families of sensing principles. Building on this dataset, our framework combines sensor-specific input adaptation with a shared tactile encoder. By learning to reconstruct wrenches, the encoder maps observations from different sensors into a shared, continuous feature space grounded in contact physics. To leverage these representations for manipulation, we introduce TaF-Policy, which integrates tactile features with visual observations and robot states to generate action chunks. We evaluate the learned representations through wrench estimation, cross-sensor retrieval, few-shot adaptation to unseen sensors, and robotic manipulation. On the core benchmark, our method reduces single-frame force RMSE by 17.1% and improves cross-sensor retrieval R@1 by 13.11 percentage points over the strongest baseline. In manipulation experiments, TaF-Policy achieves average success rates of 51.33% across three simulated tasks and 46.25% across four real-world tasks, compared with 47.33% and 23.75%, respectively, for the strongest baselines evaluated on the same task sets. Project page: https://mrjiangjm.github.io/TaF-Foundation/.

0.35

Norm2Tex: Augmenting Visuo-Tactile Simulations with Texture

cs.RO ·2026-09-21 ·Seongjin Bien, Débora Oliveira Makowski, Roberto Calandra, Florian Walter, Wolfram Burgard
similarity 0.70
Abstract

Large-scale datasets are essential for training generalist robot control policies. Collecting real-world tactile data is costly and time-consuming, motivating the use of tactile simulations. However, current tactile simulators capture only overall contact geometry and miss fine details like texture. This results in a significant domain shift between simulated and real tactile data. To address this gap, we introduce Norm2Tex, a plug-in method that augments simulations of vision-based tactile sensors with high-frequency surface details from normal map textures. By modifying the target object's depth map before a tactile simulator's rendering pipeline, Norm2Tex seamlessly integrates into different tactile simulators. We also evaluate sim-to-real transfer using material classification and a reinforcement learning task. Our results show that Norm2Tex preserves material-dependent tactile information across domains, improving texture recognition and producing material-dependent control behavior in the real world.

0.23

BIDETA: Brain-Inspired Data-Efficient Tactile Adaptation for Unseen Sensors

cs.RO cs.AI ·2026-09-08 ·Boheng Liu, Lan Wei, Ziyu Li, Chenghua Duan, Qing Li +2 more
benchmark similarity 0.70
Abstract

Vision-based tactile sensors provide high-resolution contact information for robotic perception and contact-rich manipulation, advancing embodied intelligence through more reliable physical interaction. However, device-specific sensing mechanisms cause tactile foundation models to degrade on unfamiliar hardware. Existing cross-sensor methods often require calibration data, paired observations, or iterative training. To address this problem, we propose Brain-Inspired Data-Efficient Tactile Adaptation (BIDETA), a gradient-free framework that uses a frozen tactile encoder and a few labeled target contacts to jointly predict labels for an unlabeled query batch. Inspired by the brain's rapid sensory adaptation, BIDETA combines rapid support memory, support-conditioned spectral graphs, and reliability-gated recurrence to preserve pretrained representations, repair sensor-dependent feature neighborhoods, and integrate reliable cross-query evidence. Experiments on SITR, TacVerse Shape, and TacQuad show that BIDETA substantially improves adaptation to unknown sensors: with only 10\% labeled target data on SITR, it raises mean Sparsh accuracy from 6.86\% for the frozen source classifier to 87.09\%, exceeding the strongest implemented prior comparison by 47.22 percentage points, and these gains generalize across datasets, pretrained backbones, and tactile tasks. In the SITR timing benchmark with TVL, BIDETA also achieves approximately 20x faster target-sensor adaptation than the best baseline. BIDETA thus offers a gradient-free, data-efficient route to deploying tactile models on new hardware.

0.18

MDF++: Visuo-Tactile World Action Model with End-to-end Representation Learning

cs.RO ·2026-11-06 ·Zixuan Huang, Jinhao Yu, Zachary Charlick, Dmitry Berenson
similarity 0.70
Abstract · Corl 2026

Recently, world-action models (WAMs) have emerged as a powerful framework for robot manipulation. By jointly modeling action generation and future observation prediction, WAMs can act and anticipate the outcomes of the actions. However, existing WAMs typically rely on frozen pretrained encoders trained with reconstruction, which may not produce representations well suited for robot control. In this paper, we tackle the problem of learning physicallygrounded, control-relevant representations for WAMs. We propose MDF++, a visuo-tactile world-action model that learns latent representations of multisensory observations end-to-end with a diffusion backbone. While naive joint training can lead to feature collapse, MDF++ introduces a multi-task learning strategy that leverages cross-modal correlations to learn task-relevant representations. We evaluate MDF++ on a suite of contact-rich manipulation tasks, including realworld bolt screwing and nut mating, and show that it outperforms WAMs built on frozen pretrained representations by up to 50%. Additional videos are available on our website: jointmdf.github.io.

0.13