CS Paper Radar

Digital Twin Degradation: Detecting Cyber Physical Attacks via Temporal Inconsistencies

Konstantinos E. Kampourakis, Vasileios Gkioulos, Sokratis Katsikas

cs.CR cs.AIcs.LG ·submitted 2026-08-17 06:24 UTC · v1

Abstract

Digital Twins (DTs) are increasingly used to monitor and analyze Cyber Physical Systems (CPS). However, in adversarial environments, the fidelity of a DT cannot be assumed. Communication delays, data manipulation, sensor degradation, or partial information loss may cause the DT state to diverge from the physical process it represents. Such divergence creates temporal inconsistencies that may reveal cyber physical attacks. This paper proposes a detection framework that monitors temporal consistency between the physical system and a potentially degraded DT view. A DT predictor is trained exclusively on normal system behavior to model short-term system dynamics. During operation, discrepancies between predicted and observed states are transformed into multi-horizon temporal features capturing the magnitude, persistence, and evolution of prediction residuals. An unsupervised density model characterizes normal consistency patterns, while a sequential change detection mechanism identifies sustained deviations indicative of attacks. The approach is evaluated on three widely used Industrial Control System (ICS) datasets, SWaT, HAI, and BATADAL, under multiple DT degradation scenarios, including time desynchronization and partial observability loss. Results show that temporal inconsistency patterns enable reliable event-level attack detection with bounded false alarm rates and low detection latency. The proposed method achieves up to 98% detection reliability on SWaT and false alarm rates below 2%. Unlike conventional anomaly detection methods, the proposed framework does not require attack signatures or labeled attack data and remains effective even when the DT view is degraded. These results suggest that DT degradation, often treated as a limitation, can instead serve as a useful signal for cyber physical security monitoring.

Comment
18 pages, 2 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Detect First, Explain Later: Training-Free Temporal-Memory Digital Twin Anomaly Detection with Post-Hoc LLM Interpretation for ICS

cs.CR ·2026-08-31 ·Konstantinos E. Kampourakis, Vasileios Gkioulos, Sokratis Katsikas
similarity 0.74
Abstract

Industrial Control Systems (ICS) are increasingly exposed to cyber-physical attacks that manifest as subtle and temporally evolving deviations in process behavior. Detecting such anomalies requires reasoning over persistence, cross-signal dependencies, and process-level constraints. Digital Twins (DTs) encode system knowledge through physical and logical relationships between signals, but existing DT-based approaches rely on instantaneous rule violations and lack mechanisms to aggregate weak evidence over time. This paper proposes a training-free anomaly detection method that combines deterministic DT constraints with explicit temporal memory. The DT monitors process signals and produces anomaly scores based on constraint violations, while a lightweight memory mechanism captures persistence and contextual relationships across time. The approach is evaluated on the HAI and BATADAL datasets. Ablation results show that the memory-less detector fails completely, demonstrating that temporal aggregation is essential for DT-based detection. On HAI, the memory-aware DT achieves stable detection with only 4 false alarm events, and on BATADAL, it remains effective without retraining, with 21 false alarms under domain shift. In comparison, Isolation Forest (IF) produces substantially more false alarms (328 on HAI and 127 on BATADAL), while Autoencoder (AE) exhibits dataset-dependent behavior, achieving high precision on BATADAL but low recall and inconsistent performance overall. A gated LLM is used for post-hoc interpretation, providing structured explanations without affecting detection performance. Our findings highlight the importance of temporal memory in constraint-based detection and support the use of decoupled reasoning for interpretability in ICS monitoring.

0.05

Attributing Sensor Deviations to Degradation, Weather, or Attack in Oilfield Digital Twins: A Simulation Study of Probabilistic Attribution and Cost-Based Decisions

cs.CR eess.SY ·2026-09-25 ·Mustafa S. Aljumaily, Nawar S. Alseelawi, Hayder Kareem Abed
code/data similarity 0.64
Abstract · 15 pages, 8 figures, 8 tables. Simulation study; code: https://github.com/nawaralseelawi/oilfield-dt-attribution

When an oilfield digital twin disagrees with its instruments, the operator must decide whether the cause is hardware degradation, harsh-weather effects, or malicious data manipulation. Existing digital-twin work appears to treat these causes separately: sensor-validation architectures target faults, and attack-focused twins have been evaluated on water-sector testbeds. We study joint cause attribution on a simulated four-well wellpad with 15 coupled instruments, legitimate operating transients, and weather. A physics-informed twin, identified from normal data only, produces analytical-redundancy residuals; windowed features feed a gradient-boosted classifier whose posterior drives an alarm gate with a fixed false-alarm rate and a cost-based decision rule that may defer to an analyst. On three independently generated sites, the classifier reaches macro-F1 of 0.818 on windows where the injected deviation is observable (0.723 when latent post-onset windows are included at the primary site). The physics twin accounts for essentially all of this: removing the data-driven twin changes macro-F1 by less than 0.01, whereas removing all twins drops it to about 0.58. Attacks are detected quickly (median 1.7 h) but attributed correctly at alarm time only 42% of the time, rising to 73% six hours later. A cost-aware policy that defers ambiguous cases had the lowest expected cost among all policies in every one of 144 cost and prior settings tested, sometimes by a small margin; the result depends on illustrative costs and on analysts resolving deferred cases. A twin-aware attacker was detected in 45% of episodes yet almost never attributed to attack. These results are conditional on the simulator's generative assumptions and have not been validated on field data.

0.39

LogiC-Diff: Embedding Security Properties Into AI-Enabled Cyber-Physical Systems

cs.CR cs.AI ·2026-09-29 ·Ziyan An, John Stankovic, Meiyi Ma
similarity 0.63
Abstract

AI-enabled Cyber-Physical Systems (CPS) are highly vulnerable to adversarial and anomalous inputs, where small perturbations can induce cascading errors and unsafe control actions. Existing approaches, such as rule-based filtering, training-time regularization, or diffusion-based reconstruction, either operate outside the model or lack mechanisms to incorporate formal security specifications into the prediction process. In this paper, we take the first step toward embedding security properties directly into AI-enabled CPS, enabling predictive models to enforce system-level constraints during inference rather than relying on external defenses. We introduce a logic-conditioned bi-stage diffusion framework that integrates Signal Temporal Logic (STL) specifications into forecasting. STL serves as a first-class conditioning signal that guides both an input repair stage and an output refinement stage, allowing the model to jointly mitigate adversarial perturbations and enforce desired temporal behaviors to satisfy security-critical properties. We evaluate our approach on two real-world multivariate CPS forecasting datasets under a diverse set of physical sensor and cyber attacks. Across sensor faults, gradient-based attacks, adaptive attacks, and varying attack strengths, our method consistently improves robustness and specification compliance, degrades more gracefully as attack strength increases, and generalizes better to unseen attacks. Ablation studies on specification coverage and quality further show that embedding logical security properties yields gains unattainable by reconstruction-based methods alone, highlighting a new direction for integrating formal methods with generative models in secure CPS.

0.24

Digital Twin-Based Intrusion Detection for Vehicle Powertrain CAN Bus Systems

cs.CR cs.LG ·2026-08-17 ·Araf Rahman, M Sabbir Salek, Mashrur Chowdhury
similarity 0.62
Abstract · 20 pages, 4 figures Paper submitted for presentation at the Transportation Research Board Annual Meeting and publication in Transportation R…

Existing automotive intrusion detection systems (IDSs) for the Controller Area Network (CAN) largely target discrepancies in message timing, frequency, or sequencing and cannot detect attacks that preserve these properties while manipulating the payload. Digital twins (DTs) have been used to emulate CAN traffic and generate attack scenarios for IDS evaluation, but their use for intrusion detection remains unexplored. This study develops a DT-based IDS that jointly models physical relationships among decoded powertrain signals and identifies attacks through residuals between predicted and observed behavior. A shared-encoder LSTM DT was trained on 17 decoded signals from a real Hyundai/Kia CAN log to jointly predict seven numeric and two categorical gear signals over a 24-step window. A timestep is flagged when a residual exceeds a calibrated threshold, while adaptive rollout protects the twin's input history from sustained contamination. Four attacks (plateau, continuous drift, masquerade, and gear masquerade) were evaluated against the twin and a range-and-plausibility baseline. The DT outperformed the baseline across all attacks, achieving detection rates of 94.6% for continuous drift and 89.2% for masquerade, while the baseline detected almost none of the fabricated payload attacks. These results demonstrate that learning coupled vehicle dynamics enables detection of stealthy payload manipulations that preserve normal CAN communication patterns. False positive rates reached 39.6%, highlighting the need for improved robustness under sustained attacks. The DT-based IDS shows promise for detecting stealthy payload-level CAN attacks that preserve normal communication patterns, supporting behavior-based cybersecurity for connected and automated vehicles.

0.35

A Roadmap to Available ICS Datasets and Testbeds for Cybersecurity Research

cs.CR eess.SY ·2026-08-31 ·Ebtesam J. Alqahtani, Mohammad Hammoudeh
similarity 0.62
Abstract

Industrial Control Systems (ICS) are the backbone of many critical infrastructure sectors; however, their growing level of connectivity, long lifespan and integration with the Information Technology (IT) environment introduces numerous cybersecurity challenges. The merging of Operational Technology (OT) and IT along with the deployment of Industry 4.0 technologies increases the attack surface of ICS environments, which in turn makes them more vulnerable to advanced cyber threats. Therefore, many researchers have shown interest in the field of cybersecurity of ICS. The topics of intrusion detection, anomaly detection, threat intelligence, attack simulation and resilience assessment of ICS have received much attention. Nevertheless, the development and testing of cybersecurity solutions for ICS remains to be challenging due to the lack of appropriate datasets and experimental environment. The main objective of this paper is to provide the roadmap of existing ICS cybersecurity datasets, testbeds and digital twins. This paper presents various taxonomies along with systematic analysis of architecture, characteristics, capabilities, pros and cons of these tools. The results of the analysis demonstrate the presence of persistent problems such as lack of standardized benchmarking datasets, lack of modern attack scenarios, insufficient number of datasets based on real operational traffic and difficulty in validating artificial intelligence-driven cybersecurity solutions. In addition to summarizing current research on ICS cybersecurity datasets and testbeds, this roadmap provides the identification of research gaps and recommendations on creation of new tools.

0.20

A Human-Centric Adaptive Multi-Fidelity Digital Twin Framework for Cyber-Physical Systems

cs.HC eess.SY ·2026-11-18 ·Clarisa Grijalva-Lugo, Yu-Zheng Lin, Shalaka Satam, Sicong Shao, Jesus Pacheco +2 more
similarity 0.62
Abstract · 20 pages, 3 figures, 11 tables; submitted to Advanced Engineering Informatics

Digital twins of cyber-physical systems must operate with scarce data, on assets that change after deployment, and for humans whose needs differ, yet existing implementations fix fidelity at design time and do not match the representation to the human or the task. This paper proposes a human-centric adaptive multi-fidelity digital twin framework that models the evolving human, the physical twin, and the digital twin core, and adds a human inference and adaptation function that estimates the human state, predicts the response, and adapts the representation. The framework defines low-, medium-, and high-fidelity tiers distinguished by adaptivity and by coupling, quantified as the ratio of the digital twin latency to the duration of the process step it follows. Three proof-of-concept instantiations are evaluated: a virtual reality tutor, a computer numerical control milling model, and an industrial training station. The low tier estimated learner sentiment with an accuracy of 0.86. The forecasters of the milling model and the training station, both medium-tier, showed a normalized error decline of 0.39 to 0.89 and a human adaptation gain of 1.16 to 1.51, but their latency exceeded the physical process step by 25 to 87 times. Only the station's vision model met the physical step. The tiers are separated by which functions adapt and where the latency constraint lies, not by a monotone increase in gain or coupling.

0.29

Out of Sync, Out of Sight: Phantom State Attacks against IIoT Intrusion Detection

cs.CR cs.AI ·2026-10-01 ·Sabrine Ennaji, Elhadj Benkhelifa, Nadia Kabachi
similarity 0.61
Abstract

Machine learning-based intrusion detection systems (IDS) are critical for securing Industrial Internet of Things (IIoT) environments. Most adversarial research against them perturbs the feature vector or the traffic that produces it, and depends on gradient access, repeated model queries, or a learned model of benign traffic. A smaller line of work reshapes packet timing without querying the detector, but makes malicious traffic mimic a learned model of benign timing. Across these approaches, one assumption of industrial monitoring pipelines has received little attention: temporal synchronization. An IDS reconstructs operational state by aggregating telemetry into sliding or tumbling windows, so its view depends not only on what is observed but on when each observation falls relative to a window boundary. We introduce the Phantom State Attack (PSA), which exploits that dependence under a passive, zero-query threat model. Rather than modifying packets, perturbing features, querying the classifier, or fitting any model of benign traffic, PSA injects bounded timing drift calibrated to the attack flow's own inter-arrival variability, moving observations across the nearest window boundary by the minimal shift needed. The IDS then reconstructs a phantom state that diverges from the true process state. We evaluate PSA on ToN-IoT and CIC IIoT 2025 (DataSense), against Random Forest, MLP and XGBoost, measuring detection degradation, synchronization distortion, stealth, and attacker cost. PSA degrades detection on flows carrying enough packets for window-boundary redistribution, and leaves others almost unchanged, so its effect is conditional. A query-based baseline reaches higher raw success but needs many queries per window, while PSA needs none. The results identify temporal aggregation as an attack surface reachable under weaker assumptions than prior evasion techniques.

0.18

SEAL-DT: An End-to-End Security Engineering and Assurance Framework for Cross-Domain Digital Twins

cs.CR ·2026-10-12 ·Iraklis Varlamis, Stelios Zindros, Christos Sardianos, Thomas Lagkas, Panagiotis Sarigiannidis +1 more
similarity 0.60
Abstract

Cyber-physical systems connect physical processes, software, networks and organizations. Securing them requires a clear account of what happened, what was observed, which actions were authorized and what evidence supports each decision. Digital Twin (DT) descriptions often fail to explain how these elements stay consistent, blur the distinction between physical events and uncertain observations, or detach simulation results from their requirements and assumptions. This paper presents SEAL-DT (Security Engineering and Assurance Lifecycle for Digital Twins), a structured approach to building and evaluating secure DTs. It brings entity definitions, process models, deterministic simulations, data contracts, evidence records, automated tests and reproducible results into one connected model. The main contribution is an end-to-end DT security framework, spanning scenario definition, entity/process modelling, simulation, security decision logic, evidence handling, validation and reproducible reporting. Security decisions and simulation results thus trace back to their data, assumptions and requirements. A DT is more than a copy of system state: it states what it can observe, how accurate and current its information is, where it came from and which decisions it may support. We demonstrate SEAL-DT in five scenarios: Car2X protection, passive IoT-device detection, an industrial control surrogate, lawful acquisition in a smart home, and medical-IoT monitoring that preserves continuity of care. Each includes formal models, deterministic and negative experiments, uncertainty analyses, schema-valid fixtures, technical reports and verified manifests, testing multiple configurations under normal and adverse conditions. Results show that the framework supports consistent model construction, traceable execution and comparable internal validation, and that security findings link to observable evidence.

0.20