CS Paper Radar

HiFi-BRep: High-Fidelity Latent Representation for Robust B-Rep Generation

Junhao Hou, Chenqi Luo, Pufan Wang, Jiaying Lu, Yusheng Liu, Feiwei Qin, Meie Fang, Kun Zhou

cs.CV ·submitted 2026-08-17 12:25 UTC · v2
top venuecode/data

Abstract

Boundary representation (B-Rep) generation is a fundamental task in computer-aided design, yet the direct synthesis of high-fidelity and structurally valid B-Reps remains a major challenge. Existing deep generative methods suffer from two forms of brittleness: representation brittleness, caused by padding noise and feature contamination in the latent space, and generation brittleness, stemming from sequential error propagation and a train-inference mismatch due to non-differentiable validity enforcement. We propose HiFi-BRep, a novel framework that addresses these limitations through two synergistic contributions. First, a topology-aware encoder constructs a high-fidelity latent representation by eliminating padding via learnable queries and preventing feature contamination with topology-guided attention. Second, a single-stage decoder jointly predicts geometry and topology in parallel, embedding core manifold constraints as a differentiable learning objective. This design ensures mutual guidance between geometry and topology while avoiding cascaded errors. Extensive experiments show that HiFi-BRep significantly outperforms state-of-the-art methods in both structural validity and geometric fidelity, providing a robust solution for high-quality B-Rep synthesis. Code and models are publicly available at https://github.com/1nnoh/HiFi-BRep.

Comment
Accepted to CVPR 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Train to Stitch: Topology-Preserving Regularization for Interoperable Representations

cs.LG cs.CVeess.SP ·2026-10-14 ·Akshay Malhotra, Nicolas Zilberstein, Shahab Hamidi-Rad
similarity 0.67
Abstract

As large, powerful pre-trained models become more prevalent, there is growing interest in developing methods that allow different neural networks to be seamlessly combined with little or no direct communication between them. Take autoencoder-based data compression as an example: the ability to independently choose architectures and train encoder and decoder models, while still ensuring they work together, could fundamentally transform how such models are built, deployed, and updated. In this work, we introduce a novel approach that leverages topological regularization to align the latent spaces of two independently trained autoencoder models, entirely eliminating the need for coordination during training. We provide a conditional theoretical analysis showing how the structural agreement encouraged by our regularizer can translate into approximate geometric compatibility between independently learned representations. Reconstruction experiments validate this approach empirically, substantially narrowing the interoperability gap across multiple datasets.

0.20

UniBRep: Learning Unified Geometry and Topology for Image-conditioned B-Rep Generation

cs.CV cs.GR ·2026-10-02 ·Haiyang Ying, Allen Tu, Jiaye Wu, Tom Goldstein, Matthias Zwicker
benchmark similarity 0.65
Abstract · 15 pages, 11 figures

Generating a boundary representation (B-rep) conditioned on a single image requires faithful reconstruction of geometry, valid topology, and support for complex shapes. We present UniBRep, a geometry-first framework that adapts a pretrained image-to-3D model to generate a feature mesh as a unified intermediate representation. Its surface provides a geometric scaffold, while spatially aligned learned features encode face-separation cues for topology recovery. Dual decoder branches generate the geometry and face-separation features; a geometry- and feature-guided construction pipeline then fits parametric surfaces, recovers boundary curves and connectivity, and assembles an explicit B-rep using a CAD kernel. Recovering topology from mesh regions avoids predefined architectural face-count limits, allowing face count to scale with shape complexity. On the standard DeepCAD benchmark, UniBRep produces valid B-reps for 80.49\% of inputs and reduces face Chamfer distance from 0.1096 to 0.0345 relative to CADDreamer. In a matched comparison, UniBRep also outperforms the HoLa public demo across all reported metrics. Further evaluations demonstrate scalability to high-complexity shapes beyond the standard 30-face range, generalization to objects outside the CAD training distribution, and qualitative transfer to real photographs.

0.24

BRepA: Graph-Based B-Rep Pretraining for Unified CAD Understanding and Generation

cs.CV cs.GR ·2026-11-17 ·Dekai Zhu, Zhaiyu Chen, Stefan Gavranovic, Slobodan Ilic
similarity 0.64
Abstract

Boundary representation (B-Rep) of CAD models encodes geometric primitives and their relations as a graph structure, enabling efficient shape modeling within CAD software. Learning on B-Reps for downstream tasks, such as segmentation and novel shape generation, requires specialized neural network designs. Moreover, performance improvements and accelerated training can be achieved with effective pretraining strategies, which is particularly important for tasks with limited labeled B-Rep data. In this paper, we introduce BRepA, a unified self-supervised pretraining framework that explicitly reconstructs both the geometry and topology of B-Rep objects via graph-based modeling. By learning from large-scale unlabeled CAD data only once, BRepA produces representations that generalize across tasks and significantly enhance both discriminative and generative learning. On segmentation tasks, BRepA demonstrates remarkable data efficiency. For instance, with only 1% labeled samples, BRepA pretraining improves mIoU by 32.52% compared to models trained from scratch. On generative tasks, aligning diffusion model representations with pretrained BRepA features substantially accelerates convergence, achieving nearly 2 times faster training while improving generation quality under the same computational budget, despite the diffusion model being roughly 20 times larger than BRepA. Overall, our results show that geometry- and topology-aware B-Rep pretraining provides a powerful foundation for both understanding and generating CAD structures, serving as a versatile representation backbone for diverse downstream applications. We will release the code to facilitate future research.

0.16

HiRAE: Hierarchical Representation Autoencoding with Residual Budgets

cs.CV cs.AI ·2026-09-29 ·Xuanyu Zhu, Yan Bai, Yang Shi, Yihang Lou, Yuanxing Zhang +3 more
similarity 0.64
Abstract

Pretrained visual representations support image generation, but may not fully preserve the fine-grained details needed for faithful reconstruction. Meanwhile, intermediate encoder layers contain complementary visual details, but learning to fuse them for reconstruction can produce a latent distribution that is difficult to model. Existing fusion methods require empirical tuning of layer selection or staged optimization of fusion and decoding, increasing configuration effort or training complexity. We introduce HiRAE (Hierarchical Representation Autoencoder), which learns a hierarchical fusion framework over the full encoder hierarchy to improve reconstruction fidelity while maintaining compatibility with generative modeling. HiRAE groups encoder layers by depth and learns residual corrections to the deepest representation. Group-wise norm caps bound these corrections relative to the deep anchor, with tighter budgets for shallower groups. Our HiRAE-24 preserves the latent token count and channel dimension. On ImageNet-256, HiRAE-24 reduces reconstruction FID from 0.299 to 0.209 relative to RAEv2 while maintaining competitive guided generation quality. For text-to-image generation, HiRAE-24 improves alignment over RAEv2 on GenEval, DPG-Bench, and GenAI-Bench both before and after supervised fine-tuning. Under the same generator-training and evaluation protocol, post-fine-tuning GenEval increases from 84.86 to 87.70.

0.16

Dual-Manifold Variational Autoencoders

cs.CV cs.AI ·2026-11-18 ·Hongxu Chen, Chun Wang, Yanghao Wang, Hongxiang Li, Zhen Wang +2 more
positiontheory similarity 0.64
Abstract

In latent diffusion models, expanding the latent dimension of variational autoencoders (VAEs) is essential to push the upper bound of reconstruction quality. However, without explicit structural constraints, such unregularized expansion easily yields a rugged and ill-conditioned latent manifold, causing generated latents to drift off the manifold during generation (i.e., off-manifold problem). Recent works smooth this manifold by using external foundation models (e.g., DINOv2) as a topological regularizer. However, we argue that tying the latent space to frozen external priors inherently restricts generalization: bound by their pre-training distributions and semantic biases, they may fail to capture faithful visual details on out-of-distribution domains. Observing that low-dimensional latents naturally form a smoother, generation-friendly manifold, we propose dual-manifold VAE (DM-VAE) to leverage internal representations as a topological regularizer. Specifically, DM-VAE pairs a high-dimensional reconstructive branch with a low-dimensional branch that extracts a clean topological skeleton, anchoring the high-dimensional manifold to this smooth subspace. Building upon this framework, we further introduce topological representation alignment (TRA) to supervise intermediate generator features during training, and internal guidance with topological skeleton (IG_TS) to guide structural components while preserving high-frequency details at inference. On ImageNet-1K (256x256), our foundation-model-free DM-VAE achieves a state-of-the-art rFID of 0.12 and a generation FID50K of 1.28 (w/o CFG) and 1.20 (w/CFG), and further reaches 1.11 when orthogonally combined with DINOv2.

0.09

Latent Bridge: From Video Latents to 3D Geometry via Feature Alignment

cs.CV ·2026-10-20 ·Shuai Zhang, Zhanpeng Ouyang, Zhengqing Chen, Ruohong Mei, Shaoyu Chen +5 more
code/data similarity 0.64
Abstract · Project page:https://shuaizhang7.github.io/latent-bridge-page/?case=car Code: https://github.com/hustvl/Latent-Bridge

Video generation and feed-forward 3D reconstruction typically use separate representations, requiring RGB decoding and visual re-encoding to recover geometry from generated latents. We propose Latent Bridge, which connects video generative latent spaces with geometric feature spaces to directly predict 3D geometry from video latents. We develop representation-specific bridges for Wan2.1 and V-RAE, enabling feed-forward prediction of cameras, depth, and 3D point clouds without the intermediate RGB pathway. Each bridge is trained on RGB videos through feature distillation, while the video encoder and geometry model remain frozen. Training requires neither ground-truth geometry nor execution of the downstream geometric aggregator or prediction heads. At inference, the same video latents support both RGB decoding and geometry prediction. The same trained bridge can be reused for image-to-video and text-to-video generation within the same video latent space, without bridge retraining. Experiments on Co3Dv2 and WildRGB-D demonstrate competitive geometric reconstruction quality, efficient end-to-end generation and reconstruction, and faster latent-to-geometry decoding, highlighting latent alignment as a practical and reusable interface between video generation and 3D reconstruction. Our code is available at: https://github.com/hustvl/Latent-Bridge.

0.46

GAE: Learning a Geometry-Native Latent Space for 3D-Consistent World Generation

cs.CV ·2026-09-21 ·Jiahao Lu, Minghao Yin, Wenbo Hu, Hengyu Liu, Wang Zhao +3 more
positioncode/data similarity 0.63
Abstract · Project page: https://jiah-cloud.github.io/GAE.github.io/ Github: https://github.com/TencentARC/GAE-GeometricAutoEncoder

We present a compact geometry-native latent space as a shared foundation for perception and generation. Visual generators can produce photorealistic frames without preserving a consistent 3D scene. We argue that this is not only a modeling problem but also a representation problem: generators typically evolve appearance-centric latents, while perception models recover geometry in a semantically rich space that encodes cross-view structure. Rather than adding geometry as another output, we reparameterize a geometry foundation model's features into a compact latent space for generation. We realize this shift with the geometry-native autoencoder (GAE), whose latent is jointly decodable to appearance, depth, cameras, and point maps. With this state, a standard conditional flow supports diverse generation tasks. In controlled comparisons that hold the generator and training protocol fixed, replacing the latent with GAE improves both visual quality and independently measured 3D coherence: FVD falls by $12.7\%$ and $23.1\%$ on RealEstate10K and DL3DV, and camera-trajectory error is halved on RealEstate10K. Together, these results show that the latent space is central to geometry-consistent generation and can serve as a shared interface between perception and generation.

0.30

Learn the Solid, Not the File: Canonical Inputs for Neural Networks on CAD Boundary Representations

cs.CV cs.AIcs.CG ·2026-09-10 ·Heinrich Jiang, Hager Yasser Mohamed, Alexander Hitt, Valeriia Lomakina, Henning Jiang +1 more
similarity 0.63
Abstract

Boundary representation (B-rep) is the standard format used by modern CAD systems for parametric 3D models. It turns out, the exact same solid can be represented by different B-reps: for example, two engineers using different operations, a geometry kernel rebuilding the file, and an export setting repartitioning faces will lead to different B-reps even though the underlying solid remains the same. We show that existing B-rep encoders are not robust to variation in the B-rep with the same solid on perturbations applied to standard benchmarks, naturally occurring variations inherent to CAD software, and differences in how designers model the same part via a human dataset we created in FreeCAD. The performance of popular B-rep encoders often collapses catastrophically. We propose the canonical region graph, an input representation whose nodes, features and coordinate frame are derived from the solid itself and show theoretical invariance guarantees on repartitioning and rigid motions. It matches the strongest baseline on standard benchmarks, and is stable under every perturbation we test.

0.34