CS Paper Radar

Training-Free Agentic Computer Vision for Structural Component Detection in 2D Structural Framing Plans

Mohammad Talebi-Kalaleh, Qipei Mei

cs.CV cs.AI ·submitted 2026-08-18 00:53 UTC · v2
benchmark

Abstract

Converting structural framing plans into editable finite-element model drafts is labor-intensive and susceptible to transcription errors. Existing building-component recognition systems generally depend on task-specific neural detectors, whereas language-model agents in structural engineering typically operate on text or model data rather than on drawings. To the authors' knowledge, this work is the first to apply an agentic vision-language layer to structural-component detection and model drafting from framing-plan PDFs without task-specific detector training or fine-tuning. A deterministic stage extracts geometric primitives, estimates scale by dimension-ratio consensus, recognizes five entity classes using an explicit drafting grammar, and assembles an editable layout. The agentic stage constrains typed corrections through deterministic candidates, operation-specific admission tests, change-level review, and fail-closed transactions. Evaluation used an author-generated benchmark of 100 plans, divided equally between a development half used for all rule revisions and a seed-disjoint held-out half generated after the rules were frozen and evaluated once. All scores are end-to-end results for the complete framework on the held-out half. Scale estimates were within 0.1% of the generator reference for every drawing. Recall and precision were 0.922/0.997 for columns, 0.886/0.990 for beams, 1.000/1.000 for walls, 1.000/1.000 for braces, and 1.000/0.964 for openings. A controlled study repeated two corruptions three times on three development drawings. Calibration passed all nine trials, whereas member repair satisfied every strict end-state criterion in five of nine trials. Because both benchmark halves share a generator, the evaluation does not address independently drafted plans, raster input, analytical connectivity, or solver validation.

Closest papers

Nearest neighbours by meaning across the whole index.

Can AI Co-Design Structures? An AI Agent for Early-Stage Structural Design

cs.AI ·2026-10-22 ·Ricardo Maia Avelino, Mennatallah El-Assady, Tom Van Mele, Philippe Block
published similarity 0.64
Abstract · Paper accepted to the International Association for Shell and Spatial Structures (IASS) Annual Symposium 2026, in Torino, Italy

Recent advances in large language models and agentic workflows offer a new paradigm to early-stage structural design translating design intent into structural models. Although text-to-3D approaches have demonstrated that natural language can be used to produce visual, mesh-based geometric models, structural design requires domain-specific geometric arrangements and semantically rich data types. This paper introduces a proof-of-concept workflow for prompt-to-structure generation using an AI agent connected to a COMPAS-based structural modelling API through a Model Context Protocol (MCP) server. Through controlled modelling operations, the agent creates and modifies a graph-based structural data model composed of explicit building elements. The resulting artifacts can be inspected, modified, serialised, and further connected to downstream AEC workflows. The approach is demonstrated through selected prompt-to-structure examples and by progressive and editable design sequences that resemble typical iterative structural design workflows. The results are preliminary, but demonstrate the possibility of combining natural language, agentic workflows, and domain-specific structural data structures as a first step toward AI-assisted structural co-design.

0.24

Beyond Atomic Layouts: Compositional Design Understanding with Vision-Language Models

cs.CV ·2026-08-27 ·Yiyang Huang, Zhaowen Wang, Simon Jenni, Jing Shi, Yitian Zhang +2 more
top venue similarity 0.62
Abstract · ECCV 2026

Layout understanding, or the interpretation of element organization, is essential for document analysis, user interface (UI) creation, and graphic design. While recent vision-language models (VLMs) excel at interpreting atomic layouts composed of independent elements, they struggle with compositional layouts that require reasoning over visually entangled elements within hierarchical multi-layer structures. In this paper, we introduce a new task, compositional layout understanding, and present CoDeLayout, a VQA dataset of ~20K real-world multi-layer layouts annotated with compositional element pairs and design intent. Through empirical analysis on CoDeLayout, we identify two key challenges for existing VLMs: semantic drift between textual metadata and visual content, and structural ambiguity in hierarchical inter-element relationships. To address these challenges, we propose MASON, a post-training paradigm that integrates multimodal alignment (MA) and structural perception (SP). MA enhances element interpretation by grounding metadata-defined elements to their visual counterparts, mitigating semantic drift, while SP models layer-aware inter-element spatial relationships to improve hierarchical understanding and reduce structural ambiguity. Experiments reveal substantial gaps in existing VLMs: even the strongest baseline, GPT-o3, achieves only 79.68% accuracy, whereas Qwen2.5-VL 7B with MASON reaches 91.66%. Notably, MASON surpasses full-data Direct Finetune using only 30% of the training data and scales better with additional data.

0.43

Evidence-gated multimodal parsing and vectorization of architectural floor plans

cs.CV ·2026-09-22 ·Hongxuan Chen, Wenda Wang, Jiachen Lu, Qirui Shen, Zilong Huang +3 more
benchmark similarity 0.61
Abstract · 33 pages, 43 figures, 27 tables

Architectural floor plans remain a high-friction barrier to archive digitization and early design-model preparation because heterogeneous graphics encode spatial semantics and editable geometry together. We introduce SALI-FP, an evidence-gated multimodal pipeline that converts a plan into reviewable semantic maps, objects, vectors, and relation records while constraining local revisions by image evidence. In a full production audit of 11,534 heterogeneous plans, SALI-FP produced structured outputs for every plan, including 752,510 valid polygon-bearing objects. The same output form has supported initial drawing digitization and design-model preparation in practical design work. Public-benchmark calibration is paired with a 30-case matched visual evidence set in Appendix F, where room-scale coverage, openings, oblique boundaries, and circulation continuity can be inspected directly. SALI-FP offers an engineering-oriented interpretation-to-geometry workflow for reviewed CAD/BIM preparation and existing-building information recovery.

0.16

Handoff-H1: An Orchestrated Vision-Agent System for Material Quantity Takeoff from Construction Blueprints

cs.CL cs.AIcs.CV ·2026-08-15 ·Bruno Chicelli, Henrique Alves, Rodrigo Anselmo, Joshua Weinberg, Felipe Lemos +1 more
benchmarkcode/data similarity 0.61
Abstract · 15 pages, 7 figures. Evaluation harness available on https://github.com/handoffai/residential-takeoff-benchmark/. Request data via e-mail to…

Converting a set of architectural blueprints into a complete material quantity takeoff requires visual perception across drawing sheets, dimensional and multi-hop reasoning, and grounding in construction conventions that the drawings never state. We present Handoff-H1, a takeoff system built from three layers: purpose-built computer-vision models that extract primitives; tool-using agents equipped with image operations and in-house visual-task tools, including CV-model-backed counting, detection and plan decomposition; and a persistent, hierarchically structured project foundation, grounded in a curated construction knowledge base. We evaluate on the Construction Blueprint Takeoff Benchmark: 10 real residential blueprint sets paired with consensus-validated expert takeoffs - 2,009 verified line items, restricted for scoring to the 1,348 primary-tier materials that drive an estimate - scored per trade by an LLM judge on material coverage and quantity Precision@25% (P@.25) and combined into a weighted composite. Under identical scoring from the raw PDF, seven frontier and open-weight models span composites of 35-61, and independent professional estimators - scored against the same reconciled gold standard - post 77.6% (65.5% coverage, 87.9% P@.25). Handoff-H1, working end-to-end from the raw PDF, reaches 81.6% (86.1% coverage, 78.8% P@.25): roughly 20 points above the strongest frontier agent, and above the independent estimators by pairing near-human quantity precision with coverage they do not reach. The evaluation harness is public for the open harbor framework; the blueprint sets and ground truth are available upon request for research use.

0.30

BlueprintAgent: Constraint-Triggered Targeted Revisits for Simulation-Ready Generation from Scanned Structural Blueprints

cs.CL cs.AIcs.CV ·2026-09-07 ·Zhouyuan Xu, Chen Yang, Linhao Wang, Jiansheng Fan, Chen Wang
top venue similarity 0.60
Abstract · Accepted to Findings of EMNLP 2026. 14 pages, 4 figures

Converting in-service reinforced-concrete (RC) building blueprints into simulation-ready models---structured frame representations that support deterministic FEM export and qualified-engineer review---underpins safety assessment and seismic retrofit, but the process remains manual. Direct prompting of a multimodal large language model (MLLM) over a scanned sheet is unreliable: outputs often violate engineering constraints on beam--column support, span count, or 3D continuity. We present BlueprintAgent (BPA), a constraint-triggered multimodal agent for simulation-ready frame extraction from scanned blueprints. BPA treats the MLLM as the primary reader and decision maker, with OCR and computer vision supplying localized evidence. Its central mechanism realizes engineering constraints as callable validators whose entity-level conflict reports trigger targeted MLLM revisits over the local region---an inference-time control distinct from fixed pipelines and free-form self-reflection. We evaluate BPA on 300 real scanned blueprint sheets from 20 anonymized RC frame projects, against five baselines and six ablations. BPA reaches a macro-averaged Beam F1 of 0.994, against 0.301 for single-MLLM zero-shot and 0.820 for a fixed pipeline; removing MLLM-led axis adjudication collapses Beam and Column F1 on complex multi-sheet projects. For dense technical drawings, engineering constraints are best deployed as triggers for entity-level targeted revisits rather than as post-hoc output filters.

0.42

FLOORA: A Human-Aligned Domain-Specific Language Model for Architectural Design

cs.LG cs.AI ·2026-09-28 ·Sahand Rezaei-Shoshtari, Patryk Wozniczka, Shu Ishida, Gregg Streuber, Farnoosh Javadi +12 more
code/data similarity 0.58
Abstract

Foundation models are powerful generators, but many engineering domains require structured representations that general-purpose systems handle poorly. We introduce FLOORA (Floor Layout Optimization with RL Alignment), a family of small domain-specific language (DSL) models for architectural layout generation. With specialized data and alignment, our 0.6B model outperforms much larger frontier models, achieving VLM judge win rates up to 92.0% on out-of-distribution real-world buildings and 96.0% on synthetic buildings. Human evaluations further corroborate these results, with FLOORA selected as the best model in 89.3% of evaluations. FLOORA combines a token-efficient DSL, custom tokenization, domain-specific pretraining, supervised fine-tuning (SFT), and reinforcement learning (RL) with learned human-preference and verifiable rewards. This pipeline improves architectural and geometric validity, supported by extensive empirical evaluation and ablation studies. Although focused on architecture, our results suggest that similar domain-specific recipes may be useful in other engineering domains with structured, verifiable outputs. Datasets, models, and inference code are available at https://github.com/AutodeskAILab/floora.

0.32

BIMScript: Material-Aware Structured Scene Programs for BIM Ingestion

cs.CV ·2026-08-19 ·Prakash Kondibhau Naikade, Thomas B. Moeslund, Andreas Møgelmose
publishedcode/data similarity 0.58
Abstract · Project Page: see https://bimscriptworld.github.io/BIMScript/ ; to be published in ECCV 2026 TwinWorld Workshop

Structured-language models such as SceneScript reconstruct a scene as a short program of parametric commands, an inherently editable and semantically explicit representation. We ask three questions that stand between such models and their most compelling application, automated ingestion of existing buildings into BIM tools, studied here on synthetic scans: \emph{what} is the scene made of, \emph{how fast} can it be produced, and \emph{exactly where} is each element. BIMScript answers all three within one grammar. First, we extend the layout language with per-element \emph{material} and \emph{condition} attributes, supervised by a vision-language-model material-passport corpus we build over 100k synthetic scenes (1.9M pseudo-labeled elements), and route image appearance to the material tokens through a lifted-feature point encoder. Second, we show that autoregressive decoding of these programs is dominated not by compute but by kernel-launch and host-synchronization overhead, and remove it with an output-exact CUDA-graph decoder (1.9 vs 6.4\,ms/step, $3.4\times$) plus a grammar-parallel, tolerance-verified draft-and-verify scheme that exploits the deterministic entity schema. Third, we address the model's 5cm token-grid granularity with training-free geometric snapping and a hybrid discrete--continuous decoder head that regresses a sub-bin offset, and measure how much of the residual error each recovers. Because each command maps one-to-one onto a native Revit object, we validate direct ingestion into a BIM authoring tool end to end with a working add-in and its IFC4 export, and the same program's language form is designed to support LLM-driven, sustainability-aware reasoning over the built asset.

0.38

CivilBench: Benchmarking Vision-Language Models for Multimodal Information Integration in Civil Engineering

cs.AI cs.CV ·2026-11-16 ·Dan Yuan, Yue Wen, Zhili He, Zhenkui Zhou, Shicen Liu +1 more
benchmarkcode/data similarity 0.57
Abstract · 17 pages, 8 figures

Artificial intelligence (AI), particularly large language models (LLMs) and vision-language models (VLMs), is increasingly applied in civil and structural engineering for disaster assessment, structural analysis, and engineering decision support. However, the extent to which current VLMs possess the reasoning capabilities required for reliable engineering judgments remains unclear. In this work, we introduce CivilBench, a comprehensive benchmark for evaluating VLMs in civil engineering and disaster-related scenarios. CivilBench covers three major task families: Sequential Reasoning, Image-based Structural Understanding, and Open-world Understanding, encompassing numerical reasoning, structural damage assessment, risk inference, causal analysis, and repair planning. The benchmark is constructed through a systematic pipeline of domain-specific data collection, engineering-oriented captioning, expert annotation, question design, and quality verification. Evaluation of representative state-of-the-art VLMs reveals substantial limitations in domain-specific reasoning, with Sequential Reasoning emerging as a major bottleneck, particularly when models must infer numerical relationships from sparse structured observations. Further experiments show that numerical priors and external knowledge can alleviate these limitations, although their effectiveness depends on the model's ability to reliably interpret and use the available evidence. CivilBench provides a capability-oriented testbed for identifying reasoning limitations and evaluating progress toward reliable AI-assisted engineering decision-making. The benchmark will be publicly available at https://huggingface.co/datasets/traceuryuan/CivilBench.

0.38