CS Paper Radar

Adaptive surrogate modeling for high-dimensional spatio-temporal output

Berkcan Kapusuzoglu, Shunsaku Matsumoto, Yoshitomo Miyagi, Daigo Watanabe, Sankaran Mahadevan

cs.CE cs.AIcs.LGstat.MEstat.ML ·submitted 2026-08-18 01:11 UTC · v1
publishedhighly cited

Abstract

This paper develops an adaptive surrogate modeling method for problems with very high-dimensional spatio-temporal outputs. The analysis of spatio-temporal multi-physics systems is computationally expensive and consists of a large number of inputs and outputs. Surrogate models are often constructed to replace the physics-based model to achieve computational efficiency in analyses such as uncertainty quantification and optimization that require many function calls. In order to address the challenge introduced by the high dimensionality of spatio-temporal output, a dimension reduction method is first employed to map the high-dimensional output to a low-dimensional latent space. This is followed by the construction of the surrogate model in the low-dimensional space. The prediction error in the original space, which includes both the reconstruction error and surrogate model error, is evaluated using different error metrics. Based on the prediction accuracy of the surrogate model, new training points are identified for adaptive improvement of the surrogate model. We present a novel adaptive sampling technique that combines exploration and exploitation to improve the surrogate model accuracy with the fewest possible runs of the expensive physics-based model. Thermo-mechanical analysis of a gas turbine engine blade is used to analyze the effectiveness of the proposed method.

Comment
Structural and Multidisciplinary Optimization
Journal ref
Struct. Multidiscip. Optim. 65, 290 (2022)
DOI
10.1007/s00158-022-03402-x

Closest papers

Nearest neighbours by meaning across the whole index.

Dimensionally consistent surrogate modelling through dimensional analysis and harmonic expansions

cs.LG hep-ph ·2026-09-29 ·Ernest Tarrus, Hector Gisbert
published similarity 0.61
Abstract · 45 pages, 15 figures. Published in Scientific Reports

Dimensional homogeneity is a fundamental constraint on physically meaningful models, requiring invariance under changes of units. We present a data-driven method for constructing surrogate models that satisfy this constraint at the level of the hypothesis class. Starting from a dimension matrix of measured variables, the method derives Buckingham $Π$-groups, constructs admissible dimensional prefactors, and approximates the remaining dimensionless dependence using truncated harmonic expansions on normalized invariant domains. Once the prefactor and dictionary are fixed, the coefficients are obtained from a regularized linear regression problem. We test the approach on the simple pendulum, Planck's black-body law, the double-pendulum Lyapunov field, and an experimental COBE/FIRAS black-body spectrum dataset. The results show that dimensional constraints improve conditioning, robustness to noise, and sample efficiency relative to unconstrained baselines, while the choice of dictionary becomes important in non-periodic or multi-invariant settings. The learned expressions are explicit and inexpensive to evaluate, which makes them useful as surrogate models for structured physical problems.

0.37

Equation informed time reparametrization for physics informed neural networks

cs.CE ·2026-10-30 ·Orestis Belokas, Christoforos Rekatsinas
similarity 0.59
Abstract · 25 figures, 4 tables

Physics Informed Neural Networks offer a mesh-free approach to solving differential equations, but their application to time-dependent problems remains challenging, particularly when the governing dynamics involve widely different time scales. With collocation points spread uniformly in time, short intervals of rapid change are under resolved. This work introduces an equation informed time reparameterization framework that modifies the temporal coordinate used during PINN training based on the local dynamics of the governing equation. The proposed method follows a two stage procedure. First, a pilot PINN training provides an approximate solution, which is used to linearize the governing differential operator and estimate its local response to small perturbations. These responses are combined into a time-dependent rate function, large where the dynamics are fast, that defines a strictly increasing transformation from physical time to a new computational time coordinate. A second PINN is then trained on the transformed governing equation, with uniformly sampled collocation points in the new coordinate producing a nonuniform distribution in physical time. Different combination rules and spatial reduction strategies are considered. With the cost of the pilot training included, the method reduces the error by a factor of 4 to 29 relative to the best alternative method on the Kachanov Rabotnov creep-damage model near rupture, and by a factor of 5 to 16 relative to every alternative method on the Frank-Kamenetskii equation near blow up.

0.08

Multi-output Gaussian process prediction of physical fields under linear equality constraints

cs.LG stat.ML ·2026-08-26 ·Mahamat Hamdan Nassouradine, Clément Gauchy, Pierre-Emmanuel Angeli, Sébastien da Veiga
benchmark similarity 0.59
Abstract

We address the simultaneous prediction of multiple high-dimensional physical fields governed by linear equality constraints, a setting that arises in many real-world applications in physics machine learning. Gaussian process (GP) regression is a widely used surrogate modeling approach due to its effectiveness in small-sample regimes and its ability to provide uncertainty quantification. However, applying GP models in this setting raises two major challenges: the high dimensionality of the discretized output fields and the enforcement of the physical constraint in predictions. For the latter, a common strategy consists in deducing one output from the others via the constraint relation. Through a benchmark, we show that this deductive approach is sensitive to the arbitrary choice of which output to deduce, affecting both predictive accuracy and uncertainty quantification. Consequently, there is a need for an approach that treats all fields symmetrically while strictly respecting the underlying physics. Motivated by these limitations, we propose a robust framework for jointly modeling constrained multi-field data. Our approach first leverages a specific PCA procedure for multi-field data, coined row-wise PCA, which has the interesting property of preserving the constraint in the latent space. Since standard PCA strategies for multi-field data do not preserve such constraints, we investigate theoretically the optimality of the row-wise choice. In a second step, we consider a linearly-constrained multi-output GP approach based on a specific kernel parametrization which is trained on the latent space of row-wise PCA. The proposed framework is validated on a population dynamics problem and on an industrial CFD application, which involves the prediction of Reynolds stress tensor components under the incompressibility constraint.

0.15

Dimension Bridging for 3D RANS with Neural Network Accelerated Gaussian Functional Regression

cs.CE ·2026-08-27 ·Wesley Lao, Thomas Scott, Tan Bui-Thanh, Paul Laiu, Matt Bement
similarity 0.58
Abstract

In many computational science and engineering problems, repeatedly solving fully resolved physics-based models to design for a quantity of interest (QoI) can quickly become intractable, requiring the use of low-fidelity models to predict the same QoI but introduce errors where some features are neglected or are otherwise inaccurately resolved. We use Gaussian Functional Regression (GFR) to learn a correction to a 2D Reynolds-Averaged Navier-Stokes (RANS) model to predict the aerodynamic coefficients from a 3D RANS model. This model pair has a disparity in the governing physics from the reduced dimensionality, a previously unexplored application for GFR. Empirically, our results show that with a proper choice of low-dimensional (LD) model, the proposed kernel allows for the use of fewer high-dimensional (HD) evaluations to regress a response surface to the same level of accuracy as standard stationary kernels. Moreover, the new kernel provides more informative uncertainty quantification, which we show is advantageous when used to drive an adaptive sampling algorithm. Finally, we propose a novel neural network accelerated kernel, which we show offers predictions in good agreement while speeding up evaluations by millions of times in wall clock measurements, bringing the computational budget within the real-time regime.

0.15

Learning PDE solution operators with variable initial conditions via Latent Dynamics Networks

cs.LG math.NA ·2026-10-06 ·Stefano Maria Pizzamiglio, Stefano Pagani, Francesco Regazzoni
similarity 0.58
Abstract

In many-query scenarios, data-driven surrogate models provide an efficient alternative to high-fidelity solvers for simulating physical systems governed by Partial Differential Equations (PDEs). In this context, the Latent Dynamics Network (LDNet) has recently demonstrated remarkable performance in predicting the response of spatio-temporal systems, combining Neural Ordinary Differential Equations with nonlinear dimensionality reduction. However, the original formulation assumes a fixed initial condition, limiting its applicability to many real-world applications where a system evolves from varying starting states. In this work, we overcome this limitation while keeping the end-to-end training procedure of the original LDNet and its encoder-free nature, which preserves its intrinsic independence from spatial resolution and grid topology. We infer the initial latent state directly from a small set of early-time observations, treating latent-state initialization as an adaptation problem, and investigate two strategies: an auto-decoding formulation and a meta-learning approach in which the initial latent state acts as a task-specific context variable. We demonstrate the accuracy of the proposed methods across diverse physical phenomena, spanning advection-diffusion, fluid dynamics, and solid mechanics. Meta-learning markedly accelerates latent-state inference and induces smoother, better-conditioned optimization landscapes, and spontaneously organizes the latent space into a structured representation that reflects physically meaningful features of the underlying dynamics. The coordinate-based decoder enables training from spatially subsampled data while recovering high-resolution solution fields at inference. The resulting approach provides an efficient and resolution-independent surrogate modeling framework for many-query simulations of time-dependent PDEs with varying initial conditions.

0.32

Variational Parameter Calibration with Physics-Aware Latent-Space Surrogates

cs.LG physics.comp-phphysics.data-anphysics.flu-dyn ·2026-08-11 ·Qiyao Zhou, Xujia Zhu, Pierre Joli, Yu Cong, Sibo Cheng
similarity 0.58
Abstract

Forward and inverse modeling of parametric dynamical systems requires surrogate models that are not only accurate for state prediction, but also informative for parameter calibration. However, a systematic end-to-end differentiable formulation for coupling deep-learning-based reduced-order surrogates with variational parameter estimation remains underdeveloped. In this work, we introduce a physics-aware neural-network-based latent-space framework for reduced-order forward modeling and variational parameter estimation. The proposed autoencoder-based approach yields a differentiable surrogate that maps physical parameters to predicted flow fields through a latent representation. The observable supervision is used during offline training to encourage the latent variables to retain information correlated with system parameters, while the online inverse problem is solved in the parameter space through the surrogate-induced observation operator. The method is evaluated on two computational-fluid-dynamics benchmarks. The results show that reconstruction accuracy alone is insufficient for inverse modeling, owing to the lack of end-to-end differentiability or physics awareness for variational parameter calibration. Quantitative latent-space analysis further shows that observable supervision improves case-level separability and temporal organization of latent representations. Experiments with realistic measurement settings, including noisy, low-resolution, randomly masked, and block-wise partial observations, demonstrate the robustness of the proposed framework and show that it generally reduces calibration error and variability compared with the standard surrogate models.

0.04

Beyond Compression: Training Latent Representations for Stable Long-Horizon Rollout in Neural Surrogate Solvers

cs.LG cond-mat.mtrl-scics.CE ·2026-09-24 ·Andreas E. Robertson, Ashley T. Lenau, John D. Shimanek, Benjamin A. Jasperson, Vivek Oommen +3 more
similarity 0.58
Abstract

Latent neural surrogate solvers, or latent dynamics models, accelerate simulations of time-dependent physical systems by evolving a compressed latent space rather than resolving full-resolution fields directly. In principle this reduces computational cost and simplifies learning, but in practice errors often accumulate rapidly during long autoregressive rollouts, limiting predictive utility. We show that this instability does not stem from the latent representation itself, but arises when it is trained solely for reconstruction, producing representations poorly suited to long-horizon forecasting. We systematically evaluate training-level interventions that align latent representations with long-horizon rollout: Koopman operator learning and Hamming noise injection during autoencoder training to improve compression, together with noise injection and multi-step rollout fine-tuning to improve dynamics. Interventions that improve long-horizon rollout stability often degrade conventional training metrics, including reconstruction and one-step prediction accuracy. Collectively, these interventions reduce long-rollout error by approximately 40\% and match or exceed the accuracy of full-resolution models on two physics benchmarks, while requiring 2 orders of magnitude fewer floating point operations and half the GPU memory. Applied to mesoscale crystal-plasticity simulations of high-cycle fatigue, the resulting surrogate achieves stable extrapolation over horizons orders of magnitude beyond those observed during training. More broadly, these results show that neural compression should be designed not merely to reduce dimensionality, but to restructure the solution space for stable dynamical evolution, a key requirement for reliable, efficient neural surrogates in scientific applications.

0.24

Multifidelity Operator Inference for Dynamical Systems

cs.CE stat.MLcs.LGmath.NA ·2026-11-12 ·Vignesh Sella, Anirban Chaudhuri, Karen Willcox
similarity 0.57
Abstract · 19 pages, AIAA SciTech Forum 2027 (Uncertainty Quantification Conference)

This paper presents a multifidelity (MF) formulation of Operator Inference (OpInf) for learning non-intrusive, physics-based reduced-order models (ROMs) of nonlinear dynamical systems. OpInf learns reduced operators from projections of snapshot data by solving a least squares regression problem. However, generating high-fidelity snapshots can be computationally expensive, limiting parameter coverage and the temporal extent of training trajectories for many aerospace applications, which can lead to inaccurate or unstable ROM predictions. This work proposes MF-OpInf, which combines limited high-fidelity snapshots with more plentiful low-fidelity snapshots through a control-variates-inspired MF least squares formulation to learn a single set of reduced operators across multiple trajectories. Low-fidelity trajectories provide additional parameter coverage and extend beyond the high-fidelity training time horizon. The low-fidelity snapshots are also used to construct an improved reduced basis through weighted proper orthogonal decomposition. We demonstrate MF-OpInf on a nonlinear reaction-diffusion problem with parametrized sinusoidal forcing and a two-dimensional incompressible flow past a cylinder with a parametrized inlet pulse. In these experiments, under an equal training simulation budget, MF-OpInf reduces the mean relative prediction error at unseen parameters by up to $87\%$ for the reaction-diffusion problem and $28\%$ for the cylinder flow problem over the test time regime, which extends beyond the high-fidelity training time horizon. These results demonstrate that MF-OpInf can improve temporal extrapolation and prediction at unseen parameters without increasing the training simulation budget.

0.16