CS Paper Radar

Completion-Path Credits: Multi-Resource Control for Scale-Up Fabrics

Fan Yang, Jiaqi Liu, Tao Jiang, Zhan Wang

cs.NI ·submitted 2026-08-18 08:46 UTC · v1

Abstract

Scale-up fabrics connecting GPUs and AI accelerators carry tensor transfers together with remote reads, writes, atomics, and notifications over shared target-side receiver resources. Byte-denominated credits protect link buffers and streaming HBM traffic, but poorly represent small operations dominated by Atomic execution or response injection. This paper presents SemaCredit, a receiver controller that admits each remote-memory operation against a vector of target-resource demands and returns each component when its corresponding HBM, Atomic, or response stage completes. In a deterministic event simulator with multipath queues, eight HBM partitions, a serialized Atomic engine, and a response engine, SemaCredit matches a strong per-resource byte baseline on HBM-hotspot traffic while reducing small-operation P99 latency by 52.4% under Atomic contention and 10.2% under response incast. Application-shaped mixes show 57.7% and 14.5% P99 latency improvements for AllReduce-shaped and remote-read-shaped traffic while matching byte credits on HBM-dominated MoE traffic.

Comment
10 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Purlin: Separating Orchestration from the Datapath of Collectives

cs.DC cs.AI ·2026-09-29 ·Osayamen Jonathan Aimuyo, Swapnil Gandhi, Christos Kozyrakis
similarity 0.70
Abstract

Distributed inference depends on GPU collective communication that must keep pace with evolving hardware and specialized workloads. However, existing works often couple the semantics, orchestration (where and when data moves), and datapath (how data moves) of collective communication. This coupling makes it costly to adopt new hardware mechanisms and customize communication for applications. We present Purlin, a scale-up communication framework that separates these concerns. At the top of Purlin, we specify collectives as a naming of an input and output layout and a copy or reduction operation. In the middle, we introduce a shared orchestration protocol, Stage, Notify, And Consume (SNAC), which derives coordination from these specifications. Below SNAC sits a hardware-specific datapath we call Atom, which implements two key data movement primitives for collectives: copy and reduce. This separation lets us customize collectives and adopt new hardware mechanisms while reusing orchestration via SNAC. We evaluate Purlin on A100, H200, and B200 GPUs. Across seven collectives, Purlin achieves latency speedups of up to 5.14x and bandwidth improvements of up to 4.50x over baselines. Integrated into SGLang, Purlin improves offline LLM serving throughput and interactivity by 1.13x on average and up to 1.37x over baselines. For online LLM inference, Purlin improves interactivity by 1.26x on average and up to 2.85x, with the largest gain occurring under overload. For diffusion image generation, Purlin reduces end-to-end latency by up to 1.13x.

0.19

SURMA: Efficient Fine-Grained Communication Offload for SuperPOD

cs.AR ·2026-11-16 ·Haoran Shang, Weifeng Zhang, Mengzhu Li, Huizheng Wang, Sihan Guan +12 more
similarity 0.69
Abstract

GPU SuperPODs underpin large language model (LLM) serving, but growing bandwidth and round-trip times make inter-GPU communication consume increasing compute resources. SM-driven remote memory access occupies shared memory or registers for in-flight data and competes for SM-to-NoC bandwidth. Dedicated engines can free these resources, but must handle fine-grained transfers, down to a 576\,B KV-cache entry. NVIDIA's CopyEngine uses less than 1\% of NVLink bandwidth at 7\,KB granularity. We present SURMA, an on-die Scale-Up Remote Memory Access engine. Adapting RDMA requires overcoming slow doorbell submission, excessive per-application connection state, head-of-line blocking of completion notifications on shared connections, and costly ordering for multipath transfers. SURMA uses a credit-based shared send queue to reduce submission latency from 1.2\,$μ$s to 400\,ns; fused write-with-atomic semantics to share connections while independently notifying each transaction; and Network Per Path Ordering to ensure data arrives before the completion flag without Sender or Receiver Ordering. We implement SURMA in RTL on a two-FPGA prototype and evaluate it with two 8-GPU NVLink servers. At 512\,B granularity, SURMA saturates attainable bandwidth with a single SM, whereas NVLink needs over 14\% of the SMs. SURMA occupies under 0.5\% of GPU area and accelerates inference on four models by 1.05--1.26$\times$ over NVLink.

0.19

HBF-EventLab: A Discrete-Event Simulator for Studying Host-Device Coordination in High Bandwidth Flash

cs.AR cs.ET ·2026-11-15 ·Ziqing Mei, Yiwei Huang, Zhiyi Zeng, Yuhao Xiao, Pu Pang +3 more
code/data similarity 0.67
Abstract · 15 pages, 12 figures

High Bandwidth Flash (HBF) combines NAND flash density with high-bandwidth accelerator connectivity, offering additional memory capacity for large language model inference. However, limited hardware availability makes it difficult to evaluate how host behavior and device resource constraints jointly affect HBF request processing. We present HBF-EventLab, an open-source, transaction-level discrete-event simulator based on the Open Compute Project HBF specification. HBF-EventLab connects host request dispatch, command admission, fragmented write assembly, read dispatch, NAND execution, and completion feedback within a shared event loop. It explicitly models distinct resource lifetimes and separates configurable scheduling policies from ordering and resource constraints, enabling controlled exploration of host-device coordination. Experiments show how resource limits, address interleaving, fragment arrival patterns, and scheduling policies affect write completion and request latency. The results highlight the need to consider resource limits and scheduling policies jointly, accounting for their interactions with write assembly and read eligibility. We also integrate HBF-EventLab with real GPU execution of Qwen3-0.6B, combining profiled GPU activity durations with simulated weight-access delays to estimate time to first token and time per output token, with logits and output tokens remaining bitwise identical to those from native GPU execution. HBF-EventLab provides a configurable foundation for studying HBF mechanisms, exploring scheduling policies, and assessing how HBF access delays affect application-level timing. The source code is publicly available at https://github.com/sjtu-epcc/HBF-EventLab.

0.36

HBF-Sim: An Extensible HBF Simulator for Large-scale GPU Memory Systems

cs.AR ·2026-09-24 ·Yaqi Li, Jing Wang, Junfeng Wang, Long Yang, Han Yan +2 more
similarity 0.66
Abstract · 12 pages, 9 figures

High-bandwidth flash (HBF) is introduced to address the memory wall, which can co-package a dense NAND stack with the GPU, targeting the performance gap between near-accelerator bandwidth and flash density. HBF, however, is neither a large HBM nor a fast NVMe SSD. Its usable bandwidth depends on how GPU cache-line requests map onto NAND pages, how concurrency spreads across channel-affine die sets, and how media management interacts with the GPU memory pipeline. To our knowledge, existing GPU, SSD, or HBF simulators cannot faithfully model this behavior. We present HBF-Sim, an extensible, reusable, and faithful HBF simulator integrated with simulated GPUs. It closes the loop between GPU issue limits, device queuing, and NAND behavior in one end-to-end request path. HBF-Sim separates a GPU-HBF interaction controller from page-based parallel stack storage, and it models the full GPU-HBF request path. It provides an MSHR-based address mapping table that merges cache-line requests into page-based operations, as well as a page-based multi-stack flash manager for highly parallel reads and writes. Validation tests and device-level microbenchmarks expose performance bottlenecks caused by limited channel distribution and resource conflicts, offering concrete guidance for next-generation HBF architectures.

0.16

Beyond Capacity: Scalable MoE LLM Inference via High-Bandwidth Flash with Direct GPU and HBM Paths

cs.AR ·2026-08-14 ·Seeyeon Kim, Juhyeong Jin, Joo-Young Kim
highly cited similarity 0.66
Abstract

Modern mixture-of-experts (MoE) language models increasingly strain the capacity and cost efficiency of high-bandwidth memory (HBM), as rapidly growing expert weights must be provisioned close to GPUs. High-bandwidth flash (HBF) offers substantially greater capacity, but conventional designs typically deliver HBF-resident expert weights to the GPU through HBM, leaving an additional direct GPU-HBF connection underutilized. We explore an HBF organization that simultaneously exploits two independent expert-delivery routes: a direct path that transfers expert weights from HBF to the GPU and a relay path that transfers them from HBF through the HBM base die to the GPU. Whole experts are assigned to one of the two routes, and transfers over both routes proceed concurrently, increasing aggregate expert-delivery bandwidth without replicating expert weights or introducing a shared relay bottleneck. Early expert determination identifies upcoming experts ahead of their conventional execution point, allowing HBF read latency to overlap with preceding computation, while separate management of immutable expert weights and mutable KV-cache data reduces interference between the two traffic classes. We evaluate the architecture using an event-driven continuous-batching LLM serving simulator with empirically measured GPU compute latencies. Across representative MoE workloads, concurrently utilizing the direct GPU-HBF and HBF-HBM-GPU routes consistently improves expert-delivery efficiency over designs restricted to either route alone. For a representative workload, the proposed architecture can achieve 1.94$\times$ higher throughput and 1.90$\times$ end-to-end speedup over a design that delivers all HBF-resident expert weights to the GPU through the HBM base die.

0.43

SlipStream: Enabling HBF for GPU Systems by Mitigating the Latency and SRAM Overheads

cs.AR cs.DCcs.LG ·2026-11-10 ·Anish Saxena, Hritvik Taneja, Christos Kozyrakis, Aamer Jaleel
top venue similarity 0.66
Abstract · To appear in 2027 IEEE International Symposium on High-Performance Computer Architecture (HPCA)

Large language model (LLM) inference demands ever more memory capacity for larger models and batch sizes. High-Bandwidth Flash (HBF) replaces the DRAM dies of HBM with NAND flash and provides up to 16x the capacity at comparable read bandwidth. However, HBF can incur a read latency of nearly 20$μ$s, 20x that of HBM, so on-demand HBF accesses slow inference by up to 12.8x. Conventional cache-line prefetchers require 20x more in-flight tracking state to cover this latency. Tensor-streaming designs, such as H3, follow virtual-address order as opposed to kernel-demand order, and therefore need hundreds of megabytes of buffering. We propose SlipStream, a software-hardware co-designed prefetcher that turns prefetching into a demand-paced producer-consumer pipeline. In software, SlipStream profiles the repeatable weight-page demand order of data-independent LLM kernels and inserts a staging warp that replays this order with non-blocking STAGE instructions. In hardware, the staging warp acts as the producer and the work warps as consumers. Our key insight is to retire each STAGE tracking entry only when demand first accesses the page, as opposed to when the page returns from HBF. Demand thus paces staging and bounds how far staging leads consumption. SlipStream tracks 4 KB pages instead of cache lines and allocates buffer slots only when pages return, which decouples the buffer size from outstanding traffic. Across seven dense models spanning 16-800 GB, SlipStream with a 40 MB staging buffer achieves 92.4% of the performance of an ideal HBF with HBM-like latency. H3 achieves only 43.1%, even with a 320 MB buffer. The buffer sizing of SlipStream is independent of HBF latency and workload. SlipStream with 16 MB buffer, 20x smaller than that of H3, performs within 4% of SlipStream-40MB. SlipStream also supports Mixture-of-Experts models and reaches 91.2% of ideal performance (40 MB buffer).

0.48

GNoF: A Low-SM-Overhead GPU-Native NVMe-over-Fabrics Completion Path for Data-Intensive GPU Workloads

cs.DC cs.AR ·2026-11-16 ·Lei Tian, Wenhao Gu
similarity 0.66
Abstract · 9 pages, 5 figures, 4 tables

GPUs are the main compute engine for data-intensive workloads whose datasets exceed device memory and reside on remote flash. The conventional host CPU orchestrates every NVMe-over-Fabrics (NVMe-oF) transaction and stages data through host memory, costing high CPU usage, repeated CPU-GPU synchronization, and redundant data movement. GPU-initiated storage removes the CPU from the I/O path, but existing designs leave two problems: synchronous lock-step completion pins streaming multiprocessors (SMs) in spin-polling, wasteful over a 10-100 microsecond RDMA round trip, and current GPU-native remote systems focus on target-side firmware while using per-command doorbells and periodic CQ polling. We present GNoF, a GPU-native NVMe-oF/RDMA data path where GPU threads build command capsules, post send work-queue elements, ring doorbells, and reap completions entirely on the device; the CPU only handles one-time connection setup, the admin queue, and a keep-alive thread. Three mechanisms target long fabric round trips: a doorbell mover that coalesces a burst's doorbells into one MMIO ring; a batched CQ poller with a lock-free fast peek and monotonic completion counters that cannot lose a wakeup; and a set-associative, reference-pinned GPU page cache with split fetch/wait pipelining and orphan-fill takeover. GNoF needs no target or firmware change and runs against an unmodified SPDK target. On a 200 Gb/s InfiniBand fabric, GNoF reaches 1.77 million 4 KB IOPS per client at 0.37% host CPU and about 1% SM occupancy, versus 40% CPU for kernel nvme-rdma and about 100% SM occupancy for lock-step polling. Against three existing baselines (kernel nvme-rdma, BaM over a BlueField-3 DPU, and BaM on a local SSD) under identical workloads, we show 10-22x gains on selective column I/O, CPU-burn immunity, and the regime where bulk staging is faster.

0.18

TailGuard-GDS: Tail-Safe Control of GPU Storage Data Movement

cs.DC cs.OS ·2026-11-13 ·Jiaqi Liu, Fan Yang, Xiaohang Shi, Xianzhe Zhang, Tao Jiang +3 more
similarity 0.66
Abstract · This is a full-length research article. The manuscript is 35 pages and contains 14 figures and 17 tables, including the appendix. It is not …

AI runtimes move state between NVMe storage and GPU memory on critical paths. GPUDirect Storage (GDS) removes host staging, yet our eight-H100 measurements show it is not consistently tail-optimal for semantically identical GPU-buffer operations. The preferred path varies with operation, request size, concurrency, placement, and resource contention; bandwidth and tail-latency winners can disagree. Frameworks specify what moves and when, while GPU I/O stacks expose mechanisms; neither combines phase semantics with measured tail behavior to choose a delivery plan. We present TailGuard-GDS, a runtime that selects a semantically equivalent plan per application phase. It profiles plans varying backend, request shape, and placement, minimizes GPU-visible tail latency under phase constraints, and revisits decisions as conditions change. Resource reuse keeps policy lookup and switching at microsecond-scale overhead. Integrated with PyTorch FSDP and DeepSpeed ZeRO-3, TailGuard reduces FSDP step p95 by 18.4% and GPU-idle p95 by 25.3% versus the strongest fixed path. Across five eight-GPU ZeRO-3 workloads, step p95 falls 7.9-24.6% versus fixed host staging and 28.4-42.6% versus fixed GDS. Against tuned DeepSpeed AIO, TailGuard reduces step p95 by 5.6% and raises estimated throughput by 6.1%.

0.24