CS Paper Radar

FPGA Lifecycle Management for RISC-V Systems

Tianhai Liu, James J. Hunt

cs.AR cs.SE ·submitted 2026-08-13 13:27 UTC · v1
published

Abstract

FPGA lifecycle management remains tied to proprietary toolchains and host architectures, leaving RISC-V without a vendor-neutral model for scalable bitstream deployment. A host-agnostic control-plane architecture is presented that shifts lifecycle management to the operating-system layer by leveraging standard Linux capabilities, thereby decoupling deployment from specific ISAs and vendor stacks. This enables Linux-capable RISC-V processors to serve as control hosts in heterogeneous FPGA systems. Prototyped on a Zynq-7000 SoC and generalizable to RISC-V platforms, the architecture provides a portable foundation for fleet-scale FPGA management.

Comment
2 pages
DOI
10.5445/IR/1000193590

Closest papers

Nearest neighbours by meaning across the whole index.

Minimum RISC-V: Maximum FPGA Efficiency

cs.AR ·2026-10-15 ·Martin Langhammer, Bogdan Pasca, Gregg Baeckler
published similarity 0.67
Abstract

RISC-V processors are now widely available for FPGAs, with most FPGA vendors replacing their proprietary soft-CPU architectures with this instruction-set architecture (ISA). Although contemporary FPGAs are increasingly resource- and feature-rich, a soft processor system---including memory---often occupies a disproportionately large footprint and delivers only modest performance relative to the potential of the target device. In this work we first design a lightweight but deeply pipelined RISC-V core that can run above 700 MHz in a mid-range device and that is capable of retiring one instruction per clock under ideal conditions. We then develop and demonstrate a new optimization method that compiles the final application binary and a specialized processor instance contemporaneously. The method expands each instruction into an application-specific encoding, removes unused datapath and decode logic during synthesis, and yields cores that remain assembler-compatible with the original program while no longer being binary-compatible with a general-purpose RISC-V. We implement example designs on RV32I (base integer), RV32M (integer multiply), and RV32F (single-precision floating-point) configurations. Our optimized RISC-V is as small as 170 ALMs and closes timing at 775 MHz in an Altera Agilex-5 device. Finally, we show that these processors can be packed into a deterministic area and stepped-and-repeated continuously without material impact on performance, enabling predictable multi-core density planning.

0.35

Efficient HQC Implementations on RISC-V: A Cross-Layer Design Space Exploration

cs.CR ·2026-10-05 ·Maximilian Schöffel, Johannes Feldmann, Elias Biehl, Norbert Wehn
similarity 0.66
Abstract

RISC-V-based hardware/software co-design has become an established methodology for implementing post-quantum cryptography (PQC) on embedded devices. Its software programmability, extensible instruction-set architecture, and optional dedicated accelerators create a broad design space that offers the flexibility required for crypto-agility and post-deployment updates. For HQC, a PQC key-encapsulation mechanism selected for standardization, several RISC-V-based implementations have already been published. However, these works explore only a small subset of this design space. We present, to the best of our knowledge, the most comprehensive exploration of RISC-V-based HQC. Our exploration is centered around a new, parametrizable architecture framework on which we characterize 29,920 distinct architectural configurations across all three HQC security levels on FPGA. The Pareto-optimal configurations from this framework outperform the state-of-the-art RISC-V-based HQC implementation, ranging from 4.8x lower LUT utilization at 17% lower latency to 69.6x lower latency at 30% lower LUT utilization, while also requiring up to 10.6x fewer block RAMs.

0.14

Reproducibility in open-source RISC-V HW flows

cs.SE ·2026-11-03 ·Peter Kourzanov, Anmol Anmol
code/data similarity 0.63
Abstract

Open-source hardware is booming. To prevent fragmentation, encourage collaboration and reuse we propose the RISC-V to join forces with Reproducible Builds communities and concentrate innovation potential where its needed most: creation of new micro-architectures, IPs and their integration into new SoCs and applications. To facilitate this goal, we chose Guix, a rigorous solution for reproducible software artefacts. We apply it to dependency management & reproducibility problems in open-source hardware and show the validity of the approach, taking CVA6 as a running example. The end result - a fully reproducible collection of packaged tests, emulation, simulation and cycle-accurate models - shows a promising workflow that could (in future) scale to support larger RISC-V community with reusable software & hardware components for next-generation platforms.

0.38

Operating System Support for Accelerators as First-Class Compute Elements in Heterogeneous Systems

cs.AR cs.DCcs.OS ·2026-10-24 ·Mohammad Shahidzadeh, Lesley Shannon
similarity 0.62
Abstract · 13 pages, 12 figures

Heterogeneous systems-on-chip (SoCs) increasingly rely on domain-specific hardware accelerators (HAs) to deliver performance and energy efficiency gains beyond what general-purpose processors can provide. However, operating systems (O/S), such as Linux, assume that processors are the Compute Elements (CEs) and HAs are peripheral devices rather than specialized CEs. As a result, HA execution incurs substantial software (SW) overheads that reduce the effective benefits of hardware (HW) acceleration. This work demonstrates that significant inefficiencies arise from ``O/S peripheral device taxes'' (O/S taxes), including SW stack-accelerator communication, invocation, interrupt handling, and scheduling. We built MEERKAT, a Field-Programmable Gate Array (FPGA)-based framework for configurable multicore systems that include HAs; it allows the user to migrate Linux O/S support from SW to HW and identify, study, and quantify the impact. Here we study four major sources of O/S tax and introduce techniques to mitigate them. These include a virtual-memory-aware (VMA) communication method that enables efficient HA access to application data, a lightweight HA invocation interface, Interrupt Policy Adaptation (IPA) for dynamic polling and interrupt selection, and an HA-aware scheduler that dynamically distributes work across Central Processing Units (CPUs) and multiple HA instances. Experimental results demonstrate up to $260\times$ faster communication and $2$--$6\times$ performance improvements in wall-clock time over conventional schedulers. Furthermore, our study reveals that overall system performance depends not only on HA speed, but also on O/S overheads, resource availability, and scheduling decisions. These findings highlight the importance of treating HAs as first-class computational resources and motivate a more accelerator-centric O/S design for future heterogeneous systems.

0.15

Toki: Profiling HBM Performance on FPGA Systems with RISC-V Soft Cores and PCIe Host DMA Traffic

cs.AR ·2026-09-22 ·Andrea Galimberti, Andrea Motta, Gianni Antichi, Davide Zoni
publishedcode/data similarity 0.59
Abstract · Presented at the 63rd ACM/IEEE Design Automation Conference (DAC '26), July 26-29, 2026, Long Beach, CA, USA; 7 pages, 7 figures, 2 tables

Programmable RISC-V soft cores are becoming more widespread in data-center scenarios, making it crucial to design efficient systems that deploy them on FPGA chips with HBM memory. Toki, released as open source, is the first hardware-software framework that enables profiling the performance of HBM on FPGA accelerator cards by jointly considering (i) the execution of workloads on RISC-V soft cores instantiated on the FPGA and (ii) the injection of memory traffic from the host system via DMA over PCIe, providing insights that cannot be obtained with synthetic traffic generators alone. Extensive experiments target an AMD Alveo U55C card, deploying up to 60 RISC-V compute cores and stressing its HBM2 memory through real-world applications and microbenchmarks with user-defined access patterns. Results showcase how Toki can effectively profile the impact on HBM performance of the compute cores' organization, the workload's memory access patterns, data locality, contention over the memory controllers, and host traffic.

0.36

Porting and Benchmarking Chapel on Emerging RISC-V Hardware: An HPC Viability Study

cs.DC cs.ET ·2026-08-14 ·Ian Henriksen, Chris Taylor, Patrick Diehl, Jade Abraham, Palmer Cox +2 more
benchmark similarity 0.59
Abstract

The Chapel programming language recently added support for the RISC-V architecture. Here we discuss what changes were needed for Chapel to work on RISC-V as well as lessons learned from the porting process. We use some of Chapel's extensive benchmark suite to gain further insight into the suitability of the RISC-V architecture for future HPC use. We compare performance on SiFive P550 and Unmatched boards and a Sophon SG2042 with a variety of other recent HPC CPU platforms. Various portability and performance anomalies arose on different architectures and are discussed. While the RISC-V machines represent smaller preliminary offerings and not HPC-class hardware, these results still provide hope that RISC-V hardware can become viable for HPC in the near future.

0.04

ROLoad-PMP: Securing Sensitive Operations for Kernels and Bare-Metal Firmware

cs.AR ·2026-08-13 ·Wende Tan, Chenyang Li, Yangyu Chen, Yuan Li, Chao Zhang +1 more
top venue similarity 0.57
Abstract

A common way for attackers to compromise victim systems is hijacking sensitive operations (e.g., control-flow transfers) with attacker-controlled inputs. Existing solutions in general only protect parts of these targets and have high performance overheads, which are impractical and hard to deploy on systems with limited resources (e.g., IoT devices) or for low-level software like kernels and bare-metal firmware. In this paper, we present a lightweight hardware-software co-design solution ROLoad-PMP to protect sensitive operations from being hijacked for low-level software. First, we propose new instructions, which only load data from read-only memory regions with specific keys, to guarantee the integrity of pointees pointed by (potentially corrupted) data pointers. Then, we provide a program hardening mechanism to protect sensitive operations, by classifying and placing their operands into read-only memory with different keys at compile-time and loading them with ROLoad-PMP-family instructions at runtime. We have implemented an FPGA-based prototype of ROLoad-PMP based on RISC-V, and demonstrated an important defense application, i.e., forward-edge control-flow integrity. Results showed that ROLoad-PMP only costs few extra hardware resources (< 1.40%). Moreover, it enables many lightweight (e.g., with negligible overheads < 0.853%) defenses, and provides broader and stronger security guarantees than existing hardware solutions, e.g., ARM BTI and Intel CET.

0.73

A RISC-V Simulator for the Tenstorrent Tensix Architecture

cs.DC cs.AR ·2026-11-03 ·Nick Brown, Daniyal Arshad
publishedcode/data similarity 0.57
Abstract · Author accepted version of paper in the RISC-V for HPC SC26 workshop

RISC-V based AI accelerators have become popular and not only for AI and ML, but also as vehicles for exploring HPC workloads more generally. Tenstorrent are one example, and whilst they document their Tensix architecture in detail and develop their software stack openly, running code has historically required a physical card, and their recently released simulator targets hardware equivalence rather than introspection. In this paper we present Wolfpine, a community developed RISC-V simulator for the Tensix architecture, supporting both the Wormhole and Blackhole generations and integrating seamlessly with the TT-Metal software stack. Constructed entirely from publicly available documentation, open source software and measurements on physical hardware, Wolfpine is written in pure Python for readability and ease of modification. An opt-in, provenance-tracked cost model adds timing fidelity incrementally, and typed event streams, per-component tracing and timeline export enable programmers to identify and diagnose performance bottlenecks that the hardware itself hides.

0.38