CS Paper Radar

FlashAttention for Scalable Vector Architectures

Sonia Rani Gupta, Nikela Papadopoulou, Miquel Pericàs

cs.LG cs.PF ·submitted 2026-08-19 08:02 UTC · v1

Abstract

Inference with transformer models on CPUs is increasingly important, especially for Small Language Models (SLMs), where vector architectures are emerging as a promising execution substrate. The attention module is a major bottleneck due to high memory bandwidth requirements; FlashAttention mitigates this by fusing operations to improve data locality and reduce intermediate memory traffic. In this paper, we present FlashAttention-V, a blocked FlashAttention for scalable vector architectures that adapts efficiently from short to very long vectors by exploiting parallelism across attention heads, inter-head packing to enable efficient utilization of vector lengths beyond the head dimension, and improving vector register utilization and memory access locality. We integrate FlashAttention-V into ggml within llama.cpp and evaluate it on TinyLlama, Llama 3.2, Qwen2.5, and Pythia-410M using gem5 and a Banana Pi BPI-F3. On the Banana Pi BPI-F3, we confirm that loop reordering and loop unrolling across attention heads are effective optimization principles, scaling performance gains with larger models and most pronounced with short contexts and during decoding. Simulation-based analysis shows that FlashAttention-V achieves 22x-42x speedup over scalar FlashAttention at 512-bit VL in prefill, with an additional 2x-2.5x gain scaling to 64 lanes and 4096-bit VL. During decode, FlashAttention-V achieves 8x-11x speedup using 512-bit vector lengths over scalar FlashAttention, with performance showing diminishing sensitivity to vector width and lane count due to single-token, memory-bound execution. We further identify structural bottlenecks in Q8_0 quantized linear layers that limit arithmetic amortization under long-vector execution, consistent across RVV and Arm SVE, indicating that current quantization formats pose a fundamental challenge to long-vector scalability.

Closest papers

Nearest neighbours by meaning across the whole index.

FlashPrefill V2: Block-Sparse Prefill Attention for Long-Context LLM Serving

cs.CL ·2026-08-20 ·Qihang Fan, Huaibo Huang, Zhiying Wu, Bingning Wang, Ran He
highly cited similarity 0.75
Abstract · FlashPrefill V2

Long-context modeling is a pivotal capability for Large Language Models, yet the quadratic complexity of attention remains a critical bottleneck, particularly during the compute-intensive prefilling phase. Our previous work, FlashPrefill, mitigates this cost through instantaneous pattern discovery and max-based dynamic thresholding; however, it remains an algorithmic prototype that is still distant from production deployment. In this paper, we present FlashPrefill V2, which evolves FlashPrefill from a prototype toward practical long-context serving along three dimensions. First, we introduce a mean correction term that effectively suppresses the approximation error, keeping performance degradation manageable even at extreme sparsity levels. Second, we redesign the sparse attention operator with PackGQA memory access, warp specialization, and pingpong pipelining, fully aligning with the latest FlashAttention-3/4 implementations and supporting FP8 inference to meet practical quantization requirements. Third, FlashPrefill V2 natively supports paged KV cache and continuous batching, allowing integration as an attention backend in modern inference frameworks such as SGLang. Extensive evaluations on NVIDIA H20 GPUs---among the most widely deployed inference accelerators---demonstrate that FlashPrefill V2 delivers up to 47.26x and 27.19x speedups over FlashAttention-2 at 128K context length under FP8 and BF16 precision, respectively, and, in FP8, still achieves a 30.49x speedup against an FA3/4-aligned dense baseline.

0.37

Reorienting the Vector Axis: Restructuring FlashAttention for Long-Vector Processors

cs.AR cs.DCcs.PF ·2026-10-21 ·Emmanuel Irabor, Marc Casas
similarity 0.74
Abstract

A Transformer is built around attention, whose cost grows with the square of the sequence length and dominates the layer on long sequences. FlashAttention made that cost manageable by tiling the attention matrix and updating the softmax as it goes, but almost all work since has targeted GPUs. On long-vector processors one vector register can hold up to 512 single-precision numbers. The savings of a vector instruction are proportional to how much of the register it uses, so the choice of which loop to vectorize is a first-order decision. We port PyTorch's CPU FlashAttention kernel to a RISC-V CPU with 2KB vector registers and find that it reaches 16.2% of peak floating-point throughput. The kernel walks each tile one query row at a time: the product against V is vectorized along the 64-element head dimension, the softmax's per-row maximum and sum are reductions that collapse a full register to a scalar, and the software exponential's polynomial coefficients compete with tile data for vector registers and cause spilling. We propose two techniques. The first transposes the score tile and the running output so that queries lie along the contiguous axis. The algorithm and its values are unchanged. A single parameter, the number of queries in a tile, now sets the vector length of every part of the kernel and can be matched to the machine. Both reductions also disappear. The second moves the polynomial's coefficients into scalar registers, removing the spills and cutting the softmax's vector memory instructions by 78.7%. On silicon the two together cut whole-kernel cycles by 1.84 to 2.08x at a head dimension of 64, raising floating-point utilization from 16.2% to 29.7% of peak. An FPGA of the same design ranks the changes identically and scores them higher, at 2.71x.

0.06

Empowering Hybrid Attention Models on NPUs

cs.DC cs.AI ·2026-09-26 ·Yinyuan Zhang, Daliang Xu, Xiaolong Huang, Wangsong Yin, Yun Ma +2 more
code/data similarity 0.69
Abstract · 16 pages, 18 figures

Hybrid attention models have emerged as a crucial architecture for Large Language Models (LLMs) (e.g., the Qwen3.5 and Kimi series). Their memory and computational efficiency make them highly attractive for on-device inference, forming a promising synergy with edge Neural Processing Units (NPUs). However, naive execution of these hybrid models on edge NPUs fails to deliver these benefits, often bottlenecking the prefill stage due to severe memory-system inefficiencies and architectural mismatches within the linear attention (LA) layers. We present HA-NPU, the first system to enable efficient hybrid attention LLM inference on edge NPUs without modifying the underlying algorithms. HA-NPU enhances execution efficiency by reorganizing the dataflow of the LA components across three levels: (1) At the core level, it partitions workloads by the head dimension and fuses dependent operators, eliminating cross-core global memory accesses; (2) At the operator level, it reorders execution to consume intermediate tensors immediately, drastically minimizing local-buffer pressure; (3) At the tensor level, it employs dataflow-aware layout planning to minimize transformation overhead between matrix and vector processing units. Compared to competitive baselines, HA-NPU achieves up to 35.95$\times$ LA kernel speedup and 36.14$\times$ energy reduction, delivering up to 2.03$\times$ faster end-to-end request latency. The source code will be made publicly available at https://github.com/yinyuanzhang/HA-NPU

0.38

A Framework for Accelerating Transformer Inference on RISC-V for Edge AI

cs.AR ·2026-10-06 ·Ajay Kumar M, Vishnu PS, Yike Li, Shreejith Shanker, Dimitrios S. Nikolopoulos +3 more
published similarity 0.68
Abstract · Accepted for publication at the 2026 IEEE 33rd International Conference on Electronics, Circuits and Systems (ICECS)

This work presents a framework for accelerating transformer-based language models (LMs) on resource-constrained IoT devices. The framework targets compact LMs: BERT-Tiny (B-Ty), MobileBERT (M-Bt), MiniLM (M-Lm), Electra (E-Lt) and DeBERTa (D-Bt) -- selected for their architectural diversity and use in edge inference scenarios. The proposed flow derives lightweight instruction set extensions tailored to the non-obvious computational patterns of these models. In addition, a custom instruction is introduced to accelerate the address generation stage of batch matrix multiplication, achieving a performance improvement of 15.39--21.74% with modest ASIC overheads of 6.79% in area and 2.33% in power. To further enhance performance without incurring additional processor core hardware cost, an optional compiler-directed loop unrolling strategy is employed, trading increased code size for overall reduced execution time. Evaluation on the Synopsys trv32p3f RISC-V core demonstrates inference speedups of up to 2.19x, and FPGA implementation on the AMD Zynq UltraScale+ ZCU102 shows a 32.94% area overhead at 75 MHz, whereas the ASIC implementation using the TSMC 28 nm library incurs a 21.08% area overhead while operating at 250 MHz.

0.23

Fast and Exact Relative-Position Attention via Structure-Aware Kernels

cs.LG cs.DC ·2026-10-31 ·Delyan Boychev, Ivo Petrov, Dimitar I. Dimitrov
community pick similarity 0.68
Abstract · 25 pages, 2 figures, 14 tables

Relative-position attention mechanisms offer compelling alternatives to RoPE across various transformer architectures, delivering superior performance in domains such as audio. These mechanisms typically modify attention scores by adding content-position or bias-position terms. Unlike RoPE, which encodes position via per-token rotations directly on the queries and keys, relative-position terms generally require pairwise offset-dependent computation or lookups, complicating their integration into fused attention kernels and introducing severe memory, bandwidth, and compute overheads as sequences scale. To address this bottleneck, we propose an exact attention algorithm that incorporates additive relative-position terms into FlashAttention-style tiled computation. Our method (1) uses offset-aware tiling to avoid redundant indexing and memory accesses, (2) computes only the necessary key/query-relation products and reuses them across token pairs in both forward and backward passes, and (3) uses offset-based gradient sharding and aggregation, eliminating atomic contention. We provide a unified, efficient Triton implementation across diverse relative-position attention mechanisms and evaluate it against naive and specialized implementations. For 8K-token sequences, our method speeds up the forward (backward) pass by 1.8-6.4$\times$ (2.0-21$\times$) and reduces peak memory up to 2.9-128$\times$ (1.4-54$\times$) over the strongest baseline for each mechanism, enabling long-context end-to-end transcription that is 1.8$\times$ faster and uses 2.4$\times$ less memory. Our method thus provides a drop-in, hardware-efficient solution for scaling relative-position attention transformers.

0.34

Fast Polynomial Transcendentals for LLMs

cs.LG ·2026-09-03 ·Robert Hu
similarity 0.67
Abstract

Graphics processing unit (GPU) generations scale matrix, special-function, and memory pipelines at different rates, so kernel bottlenecks move as hardware evolves. FlashAttention-4 exposed this imbalance inside attention on NVIDIA Blackwell. We test whether short polynomial programs can accelerate other special-function-unit (SFU) operations in large language models (LLMs). We first compare native PyTorch evaluation with packed fused multiply--add (FMA) programs in an isolated IEEE binary16 (FP16) sweep spanning L2-resident and high-bandwidth-memory (HBM)-resident working sets. We then replace native sigmoid, tanh, and sigmoid linear unit (SiLU) with degree-3 or degree-4 bfloat16 (BF16) programs in four GB200 integration tasks: dense SiLU, tanh-softcapped attention, sigmoid attention, and routed-expert Swish-gated linear unit (SwiGLU). The programs combine analytical symmetry, target-format rounding, and packed arithmetic inside consuming kernels. The isolated paths improve by 1.19--2.19x in L2 and 1.00--1.70x in HBM. The dense-SiLU, tanh-softcapped-attention, and routed-expert substitutions improve complete training-step throughput by 2.7\%, 2.9\%, and 8.0\%, respectively. The sigmoid-attention substitution improves complete-attention forward by 7.4\% and the complete GPU step by 0.3\%. Same-checkpoint open-weight ablations and one paired pre-training comparison per task extend the evaluation to model behavior. At common horizons near 100 billion tokens, the final smoothed training-loss differences (polynomial minus native) range from $-0.107$ to $+0.079$ across the four tasks.

0.10

CateKV: On Sequential Consistency for Long-Context LLM Inference Acceleration

cs.LG cs.AI ·2026-08-31 ·Haoyun Jiang, Haolin Li, Jianwei Zhang, Fei Huang, Qiang Hu +5 more
top venue similarity 0.67
Abstract · Published at ICML 2025

Large language models (LLMs) have demonstrated strong capabilities in handling long-context tasks, but processing such long contexts remains challenging due to the substantial memory requirements and inference latency. In this work, we discover that certain attention heads exhibit sequential consistency in their attention patterns, which can be persistently identified using a coefficient-of-variation-based algorithm. Inspired by this observation, we propose CateKV, a hybrid KV cache method that retains only critical token information for consistent heads, thereby reducing KV cache size and computational overhead, while preserving the majority of KV pairs in adaptive heads to ensure high accuracy. We show the unique characteristics of our algorithm and its extension with existing acceleration methods. Comprehensive evaluations on long-context benchmarks show that, while maintaining accuracy comparable to full attention, CateKV reduces memory usage by up to $2.72\times$ and accelerates decoding by $2.18\times$ in single-sample inputs, and boosts throughput by $3.96\times$ in batch scenarios.

0.64

LLM Inference in a Flash!

cs.LG ·2026-09-14 ·Sebastian Zhao, Minseo Kim, Coleman Hooper, Luca Manolache, Michael W. Mahoney +3 more
similarity 0.67
Abstract

Large Language Models (LLMs) have shown impressive capabilities across a range of natural language processing tasks, and LLM inference has emerged as a critical workload for enabling downstream applications. The demands of serving LLM inference are becoming increasingly challenging as requests shift toward longer sequences and heavier inference, driven by retrieval-augmented generation, inference-time compute scaling, and long-context applications. Additionally, these challenges are compounded by hardware trends, as memory capacity and communication bandwidth are not scaling as fast as increases in workload complexity. Compute-in-Flash is a promising solution to address memory bandwidth limitations by moving computation close to memory, and to exploit the large capacity of SSD technologies. However, it is challenging to deploy LLMs on these systems as they lack support for high-precision floating point operations and have limited write endurance. In our work, we aim to address these challenges by designing inference algorithms to enable LLM inference on Flash compute-in-memory devices. We present an end-to-end integer-only quantization approach to eliminate expensive floating-point computations. To address the limited write endurance, we design a dictionary-based KV cache compression strategy based on sparse dictionary coding that represents each KV vector as a linear combination of static dictionary vectors. These algorithmic improvements enable us to exploit the benefits of Compute-in-Flash for both model weights and KV cache, and to minimize expensive data transfer operations. Across Llama-3.1-8B and Qwen-2.5-7B, our combined method exhibits limited accuracy degradation while reducing dynamic KV cache traffic by 15$\times$.

0.38