CS Paper Radar

U.S. National Liquefaction Hazard Maps and their Implications for Engineering Practice and Policy

Morgan D. Sanger, Victoria P. Zdanovski, Brett W. Maurer

cs.CE ·submitted 2026-08-19 17:28 UTC · v1

Abstract

This study introduces U.S. national liquefaction hazard maps (NLHMs) developed using a mechanics-informed, geospatial machine learning model which surrogates state-of-practice liquefaction models, exploits a large library of geospatial predictors to infer subsurface conditions, and is anchored to measured conditions with in-situ test data. By convolving this geospatial liquefaction model with the 2023 U.S. national seismic hazard model, liquefaction hazard is mapped across the contiguous U.S. at ~90 m resolution within both conditional (2,475-year design event) and unconditional (return period of ground failure) formulations using high-performance computing for the high-resolution magnitude-disaggregation. The resulting NLHMs provide insights for land-use policy, preliminary site assessment, regional-scale earthquake simulation and response planning, and screening tools for regulatory enforcement, among other applications. Beyond quantifying and visualizing liquefaction hazard, the NLHMs are used herein to examine three questions of engineering practice and policy across a continuous spatial domain: (i) the effect of selecting modal versus mean magnitude in conditional analyses; (ii) the differences between conditional and unconditional hazard formulations; and (iii) the extent to which liquefaction hazard compounds with socioeconomic vulnerability. Results elucidate where and how the choice of magnitude alters computed hazards; that unconditional maps reveal important spatial deviations suppressed by single-scenario maps, which are convenient and widely used in current building codes, but less than completely rational; and that modest but statistically significant socioeconomic gradients in liquefaction exposure exist.

Closest papers

Nearest neighbours by meaning across the whole index.

Network-Scale Road Disruption from Liquefaction in Cascadia Subduction Zone Earthquakes

cs.CE ·2026-08-19 ·M. D. Sanger, O. Blaze-Smith, B. W. Maurer, L. Wotherspoon, M. O. Eberhard +1 more
similarity 0.73
Abstract

This paper presents a mechanics-informed, data-driven framework for modeling liquefaction-induced disruption of roadway networks following a magnitude-9 earthquake on the Cascadia Subduction Zone (CSZ). Liquefaction hazard is predicted using a geospatial liquefaction model trained on more than 37,000 cone penetration tests (CPTs) and conditioned on spatial data describing geomorphology, hydrology, climate, and surficial geology. Ground motions are derived from physics-based ensembles of CSZ rupture scenarios. Segment-level probabilities of closure and service degradation are estimated using empirically derived fragility relationships and propagated through the National Highway System using spatially correlated Monte Carlo simulation. Results indicate strong concentration of impacts in coastal lowlands, estuaries, and river valleys, with pronounced exposure along U.S. Route 101. Focused analysis in Pacific and Grays Harbor Counties, Washington, shows elevated probability of healthcare isolation. Compared with prior statewide assessments based on geologic screening, predicted bridge closures due solely to liquefaction are an order of magnitude lower, reflecting improved representation of subsurface conditions and damage mechanisms. Despite uncertainties, the framework provides a defensible tool for transportation resilience planning and asset prioritization in Cascadia.

0.34

GeoPhysAdapter: Scale-Matched Geophysical Adaptation for Cross-Domain Landslide Mapping with Vision Foundation Models

cs.AI cs.CV ·2026-08-10 ·Zhihang Liu, Mei-Po Kwan, Jinlin Wu, Hao Li
publishedcode/data similarity 0.59
Abstract

Newly triggered landslides rarely carry immediate annotations, so cross-domain transferability determines the value of landslide mapping for emergency response and regional risk assessment. Vision foundation models have strengthened representational transfer, yet on unseen regions, events, and data sources they still generate high-confidence false alarms. Terrain, material, and rainfall triggering can constrain such errors, but their supports are local, regional, and event-scale, so that resampling onto a 10~m grid misaligns them with the segmentation decision unit and compounds the uncertain geographic context problem (UGCoP). We propose GeoPhysAdapter, which anchors on a frozen vision foundation model, restricts terrain, material, and triggering to dense spatial guidance, regional modulation, and event-timing forcing, and applies bounded adaptation at two decision units, the pixel and the candidate landslide body, reverting exactly to the visual prediction where support is insufficient. On an event-isolated PILD dataset of four public sources, 55 global landslide events, and 7,890 test samples, 70.3% of cross-domain false-positive mass lies in near-pure spurious bodies of median equivalent diameter 207m, matching coarse-prior support rather than the pixel. Pixel-level adaptation removes a net 507,817 erroneous pixels and reduces error by 7.76%, whereas raising the decision unit to the candidate body, under identical samples, anchor, and baseline, increases error reduction to 23.99%, approximately 3.1 times the pixel-level effect, improves IoU by 0.031 (14.2% relative), and corrects 9.92 pixels per pixel harmed. The data and code are publicly available at: https://github.com/Liu-Zhihang/geophysadapter.

0.41

Multimodal Deep Survival Analysis for Sinkhole Susceptibility

cs.LG ·2026-10-05 ·Lucas Yuan, Minhee Kim, Zihan Li, Chunli Dai, Sanduni S. Disanayaka Mudiyanselage +2 more
similarity 0.58
Abstract

Sinkholes are a widespread geohazard in karst terrain. In Florida, soluble carbonate bedrock, shallow groundwater, and intense rainfall combine to make subsidence both common and spatially heterogeneous. Predicting where and when sinkholes will occur is difficult for two reasons. First, locations without reported sinkholes cannot be directly labeled or sampled as true negative locations. Second, the potential factors governing sinkhole risk span heterogeneous data modalities and therefore require careful integration within a unified modeling framework. We address both problems with our proposed model, a multimodal Cox proportional hazards framework for sinkhole susceptibility. Our contributions are threefold. First, we extend the proportional-hazards formulation to heterogeneous multimodal input through modality-specific encoders and a cross-modal fusion layer. Second, we treat unreported locations as right-censored rather than negative, avoiding hard-negative labeling and yielding continuous, time-aware susceptibility from the predicted survival function. Third, a statewide Florida case study with spatially blocked validation and ablation studies quantifies the benefit of multimodal integration. A Florida case study demonstrates that the proposed method effectively ranks sinkhole risk and produces a statewide susceptibility map that captures spatial variations in sinkhole occurrence.

0.25

Which Site, and When: A Free-Satellite-Data Test of Himalayan Glacial Lake Bursts, Landslides, and Ice Floods

cs.LG stat.AP ·2026-08-12 ·Matthew Kahn, Milan Arjel, Nirmala Adhikari, Mingmar Sherpa, James Pope
similarity 0.57
Abstract

Two free satellite signals carry real information about glacial-lake outburst risk in the Nepal Himalaya: radar interferometry sees a moraine dam slowly sagging, and satellite weather marks the weeks when a primed lake is under stress. A companion feasibility study found that deformation indicates which lake is destabilizing and weather indicates when it is at risk, but proposed no predictive model. To address this gap, we propose and evaluate models that predict which site is susceptible and when a trigger arrives. We test three related hazards on free data alone: large moraine- and ice-dammed bursts, rainfall-triggered landslides, and smaller floods from ponds on and around a glacier. Each hazard gets two questions, never blended. Using 589 dated outbursts from HMAGLOFDB and several thousand catalogued landslides, we match each event against similar but unfailed sites, and hold every model to a strong simple baseline under spatial cross-validation that withholds whole map tiles, so no model succeeds by recognising a trained-on neighbourhood. Antecedent weather times the trigger at ROC 0.73 for big bursts, 0.83 for landslides, and 0.82 for small floods. Terrain ranks susceptibility only in part: scored naively it appears near 0.9, largely because catalogued failures cluster in wetter ranges; matched against comparable nearby sites the honest figures are 0.76, 0.71, and 0.54 (no better than chance). The burst signal holds within single regions, reaching 0.89 in Nepal alone. Five deep-learning models do not decisively beat a simple gradient-boosted baseline. Three score marginally higher on landslides, a hint too small to confirm. For the lake hazards the baseline wins outright, reproduced by a three-rule decision tree on ruggedness and monsoon rainfall. We close with a ranked Nepal watchlist, a prioritisation aid, not a prediction, and note where free data reaches its limits.

0.04

Accelerating Wildfire Hazard Mapping Across Canada with an AI Surrogate Modelling Framework

cs.AI ·2026-10-16 ·Hager Radi Abdelwahed, Toluwaleke Olutayo, Chirag Goel, Jana Osea, Aldo Zaimi +5 more
similarity 0.57
Abstract · Preprint - under review

Canada's increasing wildfire activity requires frequent national hazard mapping to guide proactive mitigation, including fuel management, land-use planning, infrastructure protection, and evacuation routing. However, process-based wildfire simulation frameworks (e.g., BurnP3 and BurnP3+) rely on computationally intensive Monte Carlo simulations to model burn probability, fire intensity, and rate of spread. These workflows can take days to weeks to process a single regional modelling unit. To overcome these computational bottlenecks, we present three contributions developed through collaboration between AI researchers and wildfire modelling experts: (a) a standardized framework for training, fine-tuning, and evaluating AI surrogate models against process-based wildfire simulators; (b) a multi-task deep learning surrogate trained on national-scale data to emulate burn probability, mean fire intensity, and mean rate of spread at a fraction of the computational cost (seconds); and (c) domain-specific metrics and counterfactual evaluation protocols to probe out-of-distribution generalization. Integrating geospatial data (fuel, terrain, ignition likelihood) and regional weather, our model approximates BurnP3+ simulation outputs, achieving strong performance across agreement, rank-correlation, error, and spatial-overlap metrics. It preserves downstream hazard classifications and produces physically plausible responses to expert-informed counterfactual interventions. Furthermore, we demonstrate zero-shot transfer to a separate regional BurnP3+ study and show that lightweight fine-tuning can substantially improve regional calibration and predictive agreement. On a representative region, the surrogate achieves 806-fold end-to-end CPU acceleration and uses 13% of BurnP3+'s host memory, facilitating rapid scenario analysis.

0.08

Fusing Earth observation embeddings and spaceborne terrain with meteorological forcing for flood peak depth prediction from high-water marks

cs.LG ·2026-11-03 ·Wen Zhou, Shaowen Wang, Upmanu Lall, Venkatesh Merwade, Dingqi Ye
similarity 0.55
Abstract

Flood peak depth on normally dry land governs damage and risk to life, but is observed only sparsely, by post-event high-water mark (HWM) surveys, and depth derived from satellite flood extent is produced after the event and inherits the vertical error of the digital elevation model (DEM) it is computed from. Deep-learning flood models have in turn been trained on hydrodynamic simulations rather than on observed depths. We ask whether flood peak depth can be learned from field observations and predicted before the peak from spaceborne terrain, geospatial foundation-model embeddings and antecedent meteorological forcing. We assembled 5689 USGS HWM surveys from 39 events (2011-2025) in 24 U.S. states and Puerto Rico, assigned each a peak time from nearby sensors, paired each with a rain-free window at the same site, and linked them to Copernicus GLO-30 terrain, AlphaEarth embeddings and 144 h of hourly forcing masked to the lead time. A cross-modal fusion network trained on these observations predicts depth at the surveyed marks with a mean absolute error of 0.39 m 6 h ahead of the peak. Supervision by surveyed depth corrects the DEM error implicitly: differencing the measured peak water level with the same DEM gives 0.93 m at the same marks, 2.4 times larger, although it uses the measured water level and the model does not. Forcing accounts for 77% of the attributed reduction in depth error; terrain and the embeddings are statistically equivalent to each other and contribute the remaining 23%. On eleven held-out events the model still separates flooded from rain-free conditions but no longer resolves depth at the marks (R2 = 0.03), so the skill reported here is confined to the events and regions sampled. Field-surveyed depths can thus supervise flood depth prediction and correct terrain error that extent-based estimation cannot, while transfer to unseen storms remains the open problem.

0.13

Scalable Geospatial Machine Learning for Power-Line Asset Risk: Integrating Remote Sensing for Lightning and Vegetation Risk Modelling

cs.LG ·2026-08-19 ·Artur Sokolovsky, Bhavik Merai, Moe Jafari, Muen Chen
similarity 0.54
Abstract

Electric power networks are increasingly exposed to weather-sensitive failure mechanisms that require asset-level, spatially explicit risk modelling for effective intervention planning. This study contributes a modular, robust, and explainable probability-of-failure (PoF) modelling framework for utility asset management. The central contribution is an asset-level architecture that can be scaled to new environmental data sources and additional PoF types without reworking the underlying pipeline. This is particularly relevant for industry settings, where risk models must remain operationally maintainable while adapting to changing data availability, asset-management priorities, and climate-driven hazard conditions. We demonstrate the framework for vegetation-related and lightning-related failure modes using a harmonised geospatial machine-learning pipeline. The implementation integrates multi-source predictors, including topography (SRTM), vegetation condition (MODIS Normalised Difference Vegetation Index - NDVI), lightning climatology (LIS VHRMC), OpenStreetMap-derived proximity features, and utility operational records. The resulting architecture is computationally efficient, operationally extensible, and suitable for utility-scale deployment. It provides actionable asset-level risk stratification for inspection prioritisation, vegetation management, asset hardening, and resilience planning, supporting earlier intervention and more climate-resilient network operations.

0.27

Synergising Local Geo-Environmental Characteristics with Spatial Context for Enhancing Landslide Susceptibility Mapping

cs.CV ·2026-08-25 ·Yusen Cheng, Lei Fan, Qinfeng Zhu, Cheng Zhang, Yangyang Li +1 more
published similarity 0.53
Abstract

Data-driven methods are widely used in landslide susceptibility mapping (LSM) because they can effectively model the complex relationships between landslides and geo-environmental conditions. Existing data-driven approaches generally follow two types of data representations. Pixel-based models focus solely on the geo-environmental characteristics of a specific landslide but neglect the influence of its surrounding environment. Patch-based models incorporate surrounding spatial context but may include pixels with weak or no spatial relevance to the target landslide location. To address this limitation, this study proposes a Local-Geo and Spatial Context Fusion (LGSCF) strategy, which synergises the geo-environmental characteristics of landslide points with their corresponding spatial context through a feature-wise modulation mechanism. We tested the LGSCF strategy by integrating it into several representative convolutional neural network (CNN) architectures, creating nine different LGSCF-based models. The primary study area covers approximately 2644 km2 across Jenai and Sinyi Townships in Nantou County, Taiwan, and the dataset comprises 5332 landslide samples and an equal number of non-landslide samples. The results show that LGSCF-based models consistently outperform their corresponding baselines, achieving F1-scores up to 87.09% and AUC values up to 0.9472. Furthermore, the susceptibility maps produced by LGSCF-based models show that known landslides are more accurately concentrated in "very high" susceptibility zones with fewer misclassifications. These findings demonstrate that our fusion strategy can significantly improve the accuracy of landslide susceptibility mapping.

0.21