CS Paper Radar

Complementary, Not Cumulative: Interaction Effects in Physics-Informed Neural Networks for Navier-Stokes Vortex Shedding

Devesh Shah

cs.LG physics.flu-dyn ·submitted 2026-08-20 04:54 UTC · v1
benchmark

Abstract

Physics-informed neural networks (PINNs) embed governing partial differential equations directly into the training loss, offering a promising alternative to costly CFD solvers for unsteady flows. Yet the growing list of techniques proposed to improve PINN training is typically validated one at a time, leaving open whether these techniques actually compose. We study this question in depth on the DFG/Schafer-Turek unsteady cylinder wake benchmark. In isolation, nearly every technique performs no better than an untreated baseline. However, combining periodic (SIREN) activations with causal weighting unlocks a previously inaccessible regime, reconstructing velocity and pressure fields to within 4.1% average relative L2 error against an OpenFOAM reference solution. Adding further techniques instead causes catastrophic performance degradation, demonstrating that individually effective PINN interventions can interact nonlinearly and that more elaborate training recipes are not necessarily better.

Closest papers

Nearest neighbours by meaning across the whole index.

TurtLES: A Large-Scale Benchmark for Turbulent 3D Neural PDE Surrogates

cs.LG physics.flu-dyn ·2026-11-06 ·Jarno Platenburg, Armand Kassaï Koupaï, Paola Cinnella, Patrick Gallinari
benchmarkdataset similarity 0.67
Abstract

Machine-learning surrogates are increasingly used to accelerate computational fluid dynamics, yet progress is limited by the lack of benchmarks capturing realistic, time-dependent turbulent flows. We introduce TurtLES, a 14 TB dataset of 3D turbulent cylinder wakes in the shear-layer transition regime, computed via high-fidelity implicit large-eddy simulations. The dataset contains 400 trajectories of 400 time steps each, with 3-11 million points per frame, spanning variations in geometry, Reynolds number, and angle of attack. Unlike existing datasets, TurtLES combines (i) physically realistic turbulence with an active energy cascade driven by vortex stretching, (ii) dense irregular meshes, and (iii) long-horizon temporal dynamics. We benchmark state-of-the-art neural operators on autoregressive rollouts and identify key failure modes, including temporal instability, loss of small-scale energy, and challenges in learning on large irregular domains. TurtLES provides a new benchmark for evaluating surrogate models on 3D turbulent wakes at industrially relevant mesh resolution.

0.31

AeroZoo: A Benchmark of Well-Posed Flow Problems for Foundation Models of Aerodynamics

cs.LG cs.CEphysics.flu-dyn ·2026-11-12 ·Peter Sharpe, Carmelo Gonzales, Corey Adams, Mehdi Ataei, Sanjay Choudhry
benchmarkcode/data similarity 0.66
Abstract · 35 pages, 13 figures, 23 tables. Lead authors: Peter Sharpe and Carmelo Gonzales. Companion paper to "ISLA: A Coordinate-Free, Measure-Weigh…

Neural surrogates for computational fluid dynamics (CFD) are trained and ranked on datasets that each vary one design family in one flow domain. Such datasets cannot test the least that an aerodynamic foundation model must do: predict CFD-quality incompressible flow in seconds for new shapes in new enclosures. On DrivAerML, larger models and longer training barely lower Transolver's error; doubling the training cases cuts it by about 12% up to 400 cases, exhausting the dataset. We introduce AeroZoo, a benchmark and training corpus of 3,815 time-mean solutions to the unsteady Reynolds-averaged Navier--Stokes (RANS) equations with a transition model, across seven geometry families, eight enclosure configurations and Reynolds numbers from $10^3$ to $10^8$. Each sample poses a well-posed PDE problem in the form a solver receives it: the boundary meshes grouped by condition type, the prescribed values and the fluid properties. The 2,816 samples with a stable time mean form the canonical benchmark: two tasks, engineering metrics and 22 frozen splits, disjoint in geometry, that hold out geometry families, enclosures, boundary-condition layouts and Reynolds ranges. On the random split, boundary-condition tokens cut GeoTransolver's median velocity error from 76.9% to 8.4% of the inlet speed in single-seed runs (uniform inlet flow: 11.0%). ISLA, a transformer for boundary-driven PDEs, reaches 5.3% over four seeds, about 4 times the change from a finer mesh. On the same test samples, a held-out geometry family barely changes ISLA's error relative to uniform flow, and a held-out enclosure or boundary-condition layout raises it 2.4 to 9.2 times. The data and the scoring code will be released.

0.42

Cross-Domain Pretraining for Steady-State Neural CFD Surrogates

cs.LG ·2026-10-07 ·Anthony Zhou, Amir Barati Farimani, Shirley Ho, Rudy Morel
dataset similarity 0.65
Abstract · 43 pages, 25 figures

Neural surrogates for computational fluid dynamics (CFD) have the potential to greatly enhance engineering innovation through accelerating simulation. However, the primary limitation for neural surrogates is the lack of generalization to geometries and applications beyond the training set, which is significant given the diversity of engineering scenarios. Currently, this is addressed by generating a new dataset for a specific application; however, this requires running costly numerical solvers. In this work, we take a step toward addressing this by studying neural surrogates trained across different geometries, boundary conditions, and fidelities. We find that cross-domain pretraining improves zero- and few-shot performance on held-out datasets relative to both training from scratch and transferring from domain-specific experts. In particular, finetuning a pretrained, cross-domain model can achieve 2-3x lower errors at the same sample size and use 8x fewer samples to achieve the same error, compared to training from scratch. This benefit is architecture agnostic and improves with model size and pretraining dataset diversity. Furthermore, we study how and why cross-domain pretraining works in CFD surrogates, and find that simply pooling steady-state datasets is both sufficient and effective. Given the high cost of generating CFD data, leveraging existing datasets through cross-domain pretraining will likely be a valuable strategy as future surrogates expand to tackle new problems and use cases.

0.43

Physics-informed neural networks in the small-data regime: A controlled comparison with classical PDE surrogates

cs.CE cs.AImath.NA ·2026-11-09 ·Kirill Katsuba, Oleg Rudenko, Egor Bugaev, Alexander Tarakanov
similarity 0.65
Abstract

Neural surrogates for engineering models are often trained on large collections of simulated solutions. We investigate whether physics-informed neural networks (PINNs) can achieve accurate predictions from scarce labelled observations by incorporating governing equations and prescribed initial and boundary conditions. We introduce hierarchical loss weighting (H-PINN) and its gradient-direction-aware extension (HO-PINN), which adjust the emphasis on physical constraints according to higher-priority losses. Hierarchical PINNs are compared with Vanilla PINN, tuned gradient boosting, support-vector regression, and Gaussian-process regression on a heat equation and three heterogeneous two-phase-flow benchmarks. Experiments use 20--1000 labelled states and ten paired seeds. Each label is one coordinate--state observation, not a complete simulation. At least one PINN variant achieves the highest mean primary-target \(R^2\) in each interpolation and equation-assisted forecasting comparison at 20 and 50 labels. The advantage for water saturation persists across all tested budgets. Hierarchical weighting reduces variability across runs in selected settings. These results demonstrate that known physics can support accurate neural surrogate predictions from very few solution observations, at substantially higher fitting cost than the tested classical regressors.

0.22

Measuring and Improving Transfer of Neural Surrogates for Vehicle Aerodynamics

cs.LG physics.flu-dyn ·2026-11-18 ·Favour Nerrise, Julian Busch, Gurpreet Singh Hora, Martin Sipka, Danielle C. Maddix +1 more
theory similarity 0.65
Abstract · 23 pages, 5 figures, 13 tables

Neural surrogates for external vehicle aerodynamics are fast alternatives to physics-based computational fluid dynamics (CFD) simulations. Their foundational limitation is a lack of zero-shot generalization across vehicle classes, which results in an expensive, custom training campaign for each new vehicle design. Similar to pretrained models in other fields, a pretrained surrogate should adapt to a new vehicle class using only a few simulations and stay accurate on its pretraining domain. No prior study has systematically tested this transfer behavior. We conduct a large-scale, controlled benchmarking study on five DrivAerML-pretrained surrogates across four independent target datasets. These datasets differ from the source in geometry, CFD solver, turbulence model, and flow conditions. We find that fine-tuning these surrogates outperforms training from scratch in fewer than half of the comparisons and lowers the accuracy of the surrogate on its source dataset. We introduce GeoReplay, a geometry- and gradient-aligned source replay that keeps source simulations resembling the target in training and applies their updates only when they agree with the target gradient. A risk bound separates geometric coverage from differences in the simulated physics, and we prove that every sufficiently small GeoReplay step decreases the target training objective. GeoReplay lowers the source error of fine-tuning in 77 of 80 settings and matches its target accuracy.

0.08

Cautious Conflict-Free Inverse Gradient Methods

cs.LG ·2026-10-22 ·Damian Hattler, Qiang Liu, Nils Thuerey
code/data similarity 0.65
Abstract · Code available at [https://github.com/damiha/CautiousConFIG](https://github.com/damiha/CautiousConFIG)

Partial differential equations (PDEs) are indispensable tools for modeling complex phenomena in physics and engineering. Physics-Informed Neural Networks (PINNs) have emerged as a powerful alternative to traditional numerical solvers by directly incorporating physical constraints into neural network loss functions. Despite their advantages, PINN training requires multi-objective optimization, which often leads to significant gradient conflicts among boundary, initial, and residual loss terms. The Conflict-Free Inverse Gradient (ConFIG) method addresses these conflicts; however, integrating ConFIG with adaptive optimizers such as Adam introduces a critical vulnerability: the conflict-free direction generated by ConFIG is further processed by the optimizer, and the resulting weight update may no longer be conflict-free with respect to the task gradients. To address this issue, Cautious ConFIG is proposed as a concise three-line extension to the ConFIG algorithm that empirically restores the conflict-freeness guarantee prior to the weight update. The method is evaluated on three PINN benchmarks: the 1D Viscous Burgers' equation, the 1D Nonlinear Schrödinger equation, and the 2D Kovasznay flow. Experimental results demonstrate consistent performance improvements over the standard ConFIG baseline. Additionally, the stabilizing effect of cautious masking and its reaction to conflict severity, task number, and optimizer lag are investigated using a simple toy system.

0.17

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.64
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

FSAN: Flow State Attention Network for Aerodynamic Prediction

cs.CV cs.AI ·2026-09-06 ·Wenxuan Jin, Jianguo Yao, Haibing Guan, Xijun Li
similarity 0.63
Abstract

Accurate aerodynamic prediction is critical for designing fuel-efficient and safe transportation systems such as aircraft and automobiles, yet traditional computational fluid dynamics (CFD) simulations remain computationally expensive and expertise-intensive, severely limiting their use in iterative design and real-time analysis. Existing deep learning surrogates suffer from two major limitations: (i) they are evaluated on datasets with narrow flow-condition ranges, leaving their performance under complex flow conditions undemonstrated; (ii) they treat global flow conditions as a single vector injected uniformly across all surface points, ignoring that different geometric regions experience distinct local flow phenomena, which degrades prediction accuracy under complex flow conditions. To address these limitations, we propose the Flow State Attention Network (FSAN). FSAN separately encodes point cloud and flow conditions, then partitions the geometry into multiple flow states via learnable soft assignments, and uses flow features to update these state representations, which in turn influence point cloud features through state changes. This enables fine-grained, state-specific interaction between geometry and flow information. Extensive experiments on two well-recognized aerodynamic benchmarks demonstrate that FSAN achieves the highest accuracy among the methods compared in this work at a higher computational cost. On Emmi-Wing, FSAN reduces the Relative L2 (REL-L2) error by over 20\% compared to the strongest baseline (Transolver), and on DrivAerNet++, it achieves a 10\% reduction compared to the strongest baseline (AdaField). These results establish FSAN as a promising neural surrogate on public benchmarks with diverse flow conditions and geometries.

0.22