CS Paper Radar

Behavior Specification-Guided Program Synthesis for Binary Deobfuscation

Kangchen Zhu, Shangwen Wang, Zhiliang Tian, Zhouyang Jia, Xiaoling Li, Jun Ma, Jie Yu, Xiaoguang Mao

cs.SE ·submitted 2026-08-21 00:02 UTC · v1

Abstract

Deobfuscation is critical to reverse engineering and security analysis because it restores the readability and analyzability of obfuscated code. However, existing research primarily focuses on source-code deobfuscation, while binary-level deobfuscation remains largely underexplored despite its practical importance when source code is unavailable. Existing binary deobfuscation methods typically decompile binaries into pseudocode and then apply structural transformations. However, because compilation discards high-level semantics such as precise type information and source-level structures, this decompilation-based paradigm often produces low-quality code and provides limited assurance that the recovered code preserves the runtime behavior of the original program. To address these limitations, we propose a paradigm shift from structural transformation to behavior-driven synthesis. Our core insight is that although obfuscation distorts a program's internal structure, semantics-preserving transformations must retain its observable execution behavior. Based on this insight, we introduce BinMirror, an approach that reformulates binary deobfuscation as a behavior-specification-guided program synthesis task. By treating dynamic execution traces and interaction snapshots as behavioral specifications, BinMirror synthesizes high-quality source code and validates it against runtime observations collected from heavily obfuscated binaries. Extensive evaluations on 1.5 million synthetically obfuscated binaries show that BinMirror significantly outperforms state-of-the-art baselines, achieving a unit-test Pass@1 of 74.5% under extreme obfuscation. These results demonstrate the practical utility of BinMirror in restoring semantic clarity for real-world security analysis.

Closest papers

Nearest neighbours by meaning across the whole index.

Behavioral Containment: Source-to-Binary Function Matching for 1-Day Vulnerability Detection

cs.SE ·2026-11-19 ·Yifei Yang, Xuejiao Luo, Penghui Li
code/data similarity 0.79
Abstract

Vulnerabilities in reused open-source code often propagate into deployed binaries. Detecting them requires source-to-binary function matching, which locates the affected source function in a binary. Applying prior binary-to-binary approaches to this task would require compiling the source code with the same build configuration as the target binary, which is usually unavailable. Decompiling the binary does not make prior source-to-source approaches work either, because decompiled code differs substantially from the original source code. We observe that compilation transforms the code of a function but largely preserves its behavior. A binary function that implements a source function therefore contains its behavior, a property we call behavioral containment. Building on this, we present SBIND, which decompiles the binary and checks behavioral containment instead of comparing code. SBIND represents each function by behavioral paths, sequences of normalized operations from its entry to its exits, and aligns source paths with binary paths in order. To detect 1-day vulnerabilities, SBIND compares the binary with the vulnerable and the patched source only on the paths through the changed lines. On stripped binaries built with two compilers, two optimization levels, and four architectures, SBIND ranks the correct function first in 77.87% of 32,008 searches, against 45.69% for the state-of-the-art approach SBridge. On 26 1-day CVEs, SBIND reaches an F1 score of 0.70 on stripped binaries, against 0.51 for SBridge. Our replication of SBridge also revealed several issues in its implementation and evaluation, and its authors have acknowledged them.

0.17

VMSpec: A Decompiler-based Approach against Virtual Machine Obfuscation

cs.CR ·2026-10-21 ·Fabian Kilger, Leonard Auer, Manuel Andreas
benchmarkhot direction similarity 0.76
Abstract

Malicious actors frequently obfuscate their code to hinder investigative reverse engineering efforts. Among the most formidable techniques is virtual machine (VM) obfuscation: programs are translated into bytecode for a custom VM, often with a randomized virtual instruction set and distributed alongside a corresponding interpreter. Manual analysis and deobfuscation scale poorly due to the complexity of VM obfuscation and the diversification techniques that render each VM and interpreter unique. Existing methods primarily focus on simplifying execution traces and identifying virtual execution boundaries. However, comparatively little attention has been given to recovering higher-level program semantics from VM-obfuscated code. To address this gap, we propose VMSpec, a novel decompiler-based approach that automates the construction of VM processor specifications, enabling existing, well-known decompilers to analyze the VM-obfuscated code. We evaluate our prototype of VMSpec on 147 programs from an established obfuscation benchmark, comprising hash functions, standard algorithms, and randomized functions, obfuscated with different configurations of the Tigress and Code Virtualizer obfuscators. To demonstrate real-world applicability, we additionally include six domain generation algorithms stemming from real-world malware. VMSpec completely strips VM-obfuscation from nearly all obfuscated samples, producing output comparable to Ghidra's decompilation of the original code. Furthermore, it is the first method capable of reconstructing the complete program behavior of VM-obfuscated programs with infinite, input-dependent paths and recursive calls.

0.23

Decoupling is a Necessity: Transformation-Agnostic Decompiled Code Recovery under Optimization and Obfuscation

cs.SE ·2026-08-28 ·Zhiping Zhou, Xiaohong Li, Ruitao Feng, Yao Zhang, Yuekang Li +1 more
benchmark similarity 0.76
Abstract · Preprint. 11 pages, 3 figures, 3 tables

Reverse engineering is essential for software security analysis and vulnerability detection. Decompilation, the process of lifting binaries to high-level pseudocode, is central to this task. However, production binaries are hostile environments: aggressive compiler optimizations and adversarial obfuscation jointly mangle control structures, obscure variable intents, and disguise high-level program logic. Consequently, existing LLM-based decompilation tools frequently suffer from structural collapse and semantic hallucinations. We present ReSource, the first multi-phase LLM framework designed for transformation-agnostic source recovery. To tackle these intertwined distortions, ReSource conceptualizes the binary-to-source discrepancies into three orthogonal tiers, namely lexical, syntactic, and semantic, and decouples the recovery process accordingly. First, to ground the LLM and prevent logic drift, it retrieves empirical priors from a curated Semantic Distortion Database. Second, to resolve control-flow flattening, it integrates a lightweight predictor to reconstruct the source-level structural skeleton. Finally, a contextual lexical deduction stage refines identifiers to restore human readability. Evaluated on a massive benchmark of over 80,000 decompiled-source function pairs across three optimization levels and four obfuscation techniques, ReSource achieves an 83% Top-5 source retrieval accuracy and an average similarity score of 0.66. By maintaining robust semantic identifiability where state-of-the-art baselines (DeGPT, LLM4Decompile, and FidelityGPT) severely overfit or degrade, ReSource provides a scalable and reliable foundation for downstream security analysis.

0.11

No Bit Left Behind: Using Brute-Force Lifting to Achieve Fully Static Binary Recompilation

cs.CR ·2026-09-14 ·Tianjiao Huang, Po-An Chen, Nick Baron, Michael Franz
similarity 0.70
Abstract

Binary recompilation is a technique for operating directly on executable code. It promises to automate two important tasks: retrofitting security mitigations onto legacy binaries, and migrating binaries across instruction set architectures (ISAs). Yet today, there is no fully automated system that can reliably lift arbitrary binary executables to a compiler intermediate representation (IR) such as LLVM IR, or that can fully statically and reliably translate non-trivial binary executables from one ISA to another. The main underlying problem is that recovering a program's control flow graph (CFG) statically is impossible in general: computed branches can jump to targets that cannot be determined without actually running the program. Existing systems resort to runtime fallback mechanisms, requiring a significant portion of the binary translation machinery to accompany the translated program on the target machine. This article presents a fully static, whole-program binary lifting system requiring no runtime translation support on the target. Rather than attempting to distinguish code from data, we treat every byte offset as a potential branch target and lift the entire binary in a brute-force manner, constructing a superset CFG that conservatively contains all feasible control flows. Statically unresolvable computed branches are thereby reduced to lookups in a dispatch table that points to the corresponding translated control flow path. We have implemented this approach as a prototype binary recompiler from x86-64 binaries to LLVM IR, requiring no code/data heuristics. We validate it with a fully static cross-compilation to AArch64, achieved by reusing existing LLVM backends with no modification.

0.25

When LLM Decompilers Recompile More and Preserve Less

cs.CR cs.AI ·2026-09-04 ·Chang Liu, Edward Raff, Kristopher Micinski
similarity 0.69
Abstract

Decompilation recovers high-level source from compiled machine code and serves as a foundation for security tasks such as vulnerability detection and malware analysis. Traditional decompilers like Ghidra and Hex-Rays expose whatever they cannot resolve as visible placeholders and often emit pseudocode that will not compile or execute; LLM-based decompilers produce clean, idiomatic C and are now judged almost entirely by recompilability and re-executability: whether the output builds and passes its shipped input/output tests. We show that these metrics can reward the wrong path: a function may recompile and pass every shipped test yet diverge on other legitimate inputs, and a disclosed vulnerability may disappear from the recompiled code with no visible trace of the crash. Neither failure is caught by existing suites. To address this gap, we propose Decompile-Diverge, a behavioral comparison oracle not relying on fixed or hand-crafted tests: for each function it synthesizes a driver, grows a fuzzing corpus from the reference, and reruns the decompiled code on the same inputs to detect changes in the function's behavior. Across eight systems in nine configurations on established LLM decompilation corpora, candidates that pass every shipped test still diverge from the original on our input corpus: 4.9% overall, and as many as 13% for a single system. On 300 real GitHub library functions and 287 CVE-grounded functions, recompilability and behavioral agreement can come apart: the strongest refinement LLM lifts Ghidra's build rate from 75% to 90%, while its Matched rate falls from 74% to 62%; on disclosed vulnerabilities, up to one tenth exhibit Crash Absence in its output. Source-level analysis traces this divergence to introduced fields, types, callees, and guards that replace the visible unknowns traditional tools leave behind.

0.38

Revisiting Re-executability: Coverage-Guided Symbolic Feedback to Improve Decompilation

cs.SE ·2026-11-13 ·Yuxin Hu, Xiaohan Wang, Kevin Leach
similarity 0.69
Abstract · 21 pages, 6 figures. Yuxin Hu and Xiaohan Wang contributed equally

When source code is unavailable, decompilation provides a source-level representation of a binary. However, code recovered by conventional or LLM-assisted decompilation may not preserve the original behavior of the binary. Recent approaches evaluate re-executability using fixed test suites, but passing these suites does not ensure behavioral preservation. We present SymDec, an LLM-assisted decompiled-code repair system that uses the original binary as a behavioral reference. SymDec uses coverage-guided symbolic execution to explore the I/O-level behavior of the original and recompiled binaries, and symbolic comparison to identify inputs that expose behavioral differences. These inputs are replayed on both binaries to confirm the differences, which are returned as structured feedback to guide subsequent LLM revisions. We evaluate SymDec on 120 functions from ExeBench and DecompileBench, compiled for x86-64 and ARM64 at optimization levels O0-O3, yielding 960 binary decompilation tasks. More than half of the tasks yield candidates that pass the supplied test suite and complete symbolic comparison without detected behavioral differences. Among candidates that pass all supplied tests, symbolic comparison exposes replay-confirmed behavioral differences in 4.5% of cases, showing that test-suite re-executability can miss behavioral discrepancies. Under the same input-generation budget, symbolic execution achieves higher mean line and branch coverage than black-box fuzzing. Symbolic feedback also improves the conventional metric, increasing the mean single-step test-pass rate from 90.1% to 93.3%. These results show that symbolic comparison provides stronger evidence of behavioral consistency than test-suite re-executability alone and supplies effective feedback for repairing decompiled code.

0.21

LOHRE: Execution-Grounded Type Recovery via LLM-Orchestrated Hybrid Analysis

cs.SE ·2026-11-11 ·Hao Jiang, Yujie Yang, Tao Li, Chenhui Cui, Liangfeng Xu +4 more
similarity 0.68
Abstract

Documenting stripped binary functions for security analysis requires recovering function interfaces and user-defined type (UDT) layouts from machine code. Existing large language model (LLM)-based methods face two limitations: they lack execution-based validation to detect inferred UDTs inconsistent with actual memory layouts, and may overlook evidence about shared UDTs across functions without direct call relationships. We present LLM-Orchestrated Hybrid Reverse Engineering (LOHRE), a framework that treats inferred UDTs as falsifiable hypotheses and tests them against program execution. LOHRE uses a hypothesize-validate-refine loop to test candidate layouts through paired dynamic slice emulation of baseline and mutated inputs. To reduce the cost of processing lengthy execution histories, the Execution-Depth Heuristic (EDH) compresses paired traces into an execution-depth difference and a summary of the tested field's observed uses. A cross-function knowledge base aggregates compatible UDT hypotheses and field-level confidence scores to guide testing and hypothesis refinement. We evaluate LOHRE on RealType at four optimization levels and a Windows remote procedure call (RPC) dataset. LOHRE achieves an average UDT Structural accuracy of 57.85% across RealType's four optimization levels and 35.6% on Windows RPC, outperforming the evaluated static baselines. Disabling dynamic validation reduces accuracy to 19.28% on RealType and 9.2% on Windows RPC. Removing the cross-function knowledge base reduces accuracy to 41.03% on RealType and 10.0% on Windows RPC. Replacing EDH's compressed feedback with full execution traces reduces recovery accuracy while increasing token use by 3.7 times and runtime by 3.0 times. These results indicate that execution-based validation, compact feedback, and cross-function evidence contribute to accurate and efficient UDT recovery.

0.30

InSPECtor: Improving SLEIGH Processor Specification Veracity via Proxy

cs.CR cs.PL ·2026-08-13 ·Michael Chesser, Paul Quirk, Douglas Cooke, Guy Farrelly, Surya Nepal +1 more
publishedcode/data similarity 0.68
Abstract · Extended version published at USENIX Security (USENIX Security 2026). Code available at: https://github.com/Sleigh-InSPECtor/

Processor specifications underpin critical security and program- analysis tools such as disassemblers, decompilers, and emulators, yet, their correctness is rarely examined. Errors in specifications distort program behaviour, obscure vulnerabilities, and enable analysis-evasion techniques. Validating processor specifications is a non-trivial task. Our study is a significant undertaking to enable, for the first time, the systematic validation of open-source SLEIGH language specifications, predominantly used by Ghidra. We design and implement a testing framework based on an automated oracle validation strategy by proxy. Our approach leverages the structure encoded in a specification itself to enumerate decodable instruction forms and generate targeted initial states. Then differentially test the successful decoding and emulation of those instructions by comparing emulators exercising the processor specification against hardware references. Applying InSPECtor across diverse, open-source specifications---x86-64, AArch64, ARM/Thumb, RISC-V, MSP430---embedding differences in specification styles, author preferences, and instruction set architecture designs, we uncovered over 38,920 discrepancies that led to 125 unique bugs with proposed fixes, identifying decoding and semantic defects as well as cross-vendor inconsistencies. We distill our findings into 8 concrete recommendations to drive future improvements. Our work underscores the importance of specification correctness and provides a practical tool to substantially improve the fidelity of SLEIGH processor specifications, strengthening the reliability of downstream security and analysis tools.

0.47