CS Paper Radar

VortexChat: An agentic framework for autonomous multi-objective integrated photonic design

Faqian Chong, Yulun Wu, Shilong Li, Andrew Forbes, Hongsheng Chen, Song Han

cs.AI physics.optics ·submitted 2026-08-21 02:50 UTC · v1
benchmark

Abstract

The advancement of modern integrated photonics is frequently bottlenecked by device design workflows that rely heavily on manual simulation and expert intuition. While inverse design offers an alternative, it remains constrained by expert supervision and a lack of end-to-end automation. To address these issues, we present VortexChat, an agentic framework for the autonomous, end-to-end inverse design of integrated photonic devices directly from natural language specifications. VortexChat couples a large language model (LLM) decision agent with topology generation, gradient-based refinement, and full-wave electromagnetic simulation. This closed-loop architecture enables the system to iteratively decompose design objectives, orchestrate computational tools, and update strategies based on feedback with minimal human intervention. Constrained by the absolute metrics of the Vortex100 Benchmark, VortexChat autonomously generates devices that strictly meet all predefined performance thresholds without any human-in-the-loop. As an experimental demonstration, we fabricated a broadband terahertz perfect vortex beam multiplexer, autonomously designed by VortexChat, with measurements confirming high-efficiency operation, high mode purity and low inter-channel crosstalk in agreement with full-wave simulations. These results demonstrate that an LLM agent can assume key aspects of expert decision-making in photonic inverse design while maintaining physical fidelity and fabrication feasibility, providing a scalable route towards autonomous design of complex integrated photonic systems.

Closest papers

Nearest neighbours by meaning across the whole index.

HALO: A Physics-Aware LLM Agent Framework for Nanophotonic Design

cs.MA physics.optics ·2026-08-28 ·Yubo Zhang, Jinlin Xiang, Zijun Zhao, Yang Zhao, Eli Shlizerman +1 more
benchmarkhot direction similarity 0.67
Abstract · 9 pages, 3 figures, 5 charts

Language models have recently been applied to nanophotonic design, but it remains unclear whether they can reliably translate optical objectives into simulation-ready designs, execute electromagnetic analysis, and revise decisions from numerical feedback. We introduce HALO, a physics-aware framework that couples language-model planners with typed design specifications, electromagnetic simulation, diagnostic evaluation, and optional reuse of prior failure trajectories in an iterative design loop. We further introduce HALO-Bench, a 52-task benchmark spanning lab-derived, paper-derived, and open-ended nanophotonic design tasks under a shared evaluation protocol. We compare three planner configurations: a Fixed Structured Workflow, an Autonomous Structured Agent using the same simulation interface, and an Autonomous Coding Agent that directly writes and executes simulation code. The Fixed Structured Workflow is the most token-efficient and exhibits no observed code- or path-level failures, while autonomous coding can achieve higher task success with stronger models at the cost of additional operational failures. We also study reuse of prior failed trajectories. On targeted multi-round tasks, retrieved failure feedback reduces both iterations to first success and total token use. These results clarify the tradeoffs between explicit interfaces, autonomous execution, and reusable design experience in scientific agents.

0.26

PCFBench: How Far Can Large Vision-Language Models Go in Physics-aware Photonic Inverse Design?

cs.CV ·2026-10-23 ·Shengchao Chen, Ting Shu, Sufen Ren
top venuebenchmark similarity 0.65
Abstract · Accepted to NeurIPS 2026, 66 pages, 30 figures, 27 tables

Photonic crystal fibers (PCFs) underpin critical applications in telecommunications, sensing, and high-power laser delivery, yet their design remains a manual, expert-intensive process that couples geometric intuition with deep waveguide physics. Vision-language models (VLMs) offer a promising path toward automating PCF design, but can they truly reason about photonic physics from microscopy images, or do they merely recognize visual patterns? We introduce PCFBench, the first comprehensive benchmark for evaluating VLMs on the perception, reasoning, and decision steps of the photonic inverse-design loop. PCFBench spans 26 tasks organized into six categories of increasing cognitive demand (Geometry Perception, Physics Understanding, Text Generation, Multi-modal Reasoning, Inverse-Design Decision, and Code Generation), built from over 220K FDTD simulation samples across 18 structurally diverse fiber families. We evaluate both individual VLMs on isolated tasks and multi-agent systems (MAS) on the full sequential pipeline from perception to design. Our results reveal a striking perception-design gap: current models can identify fiber geometry with moderate success, yet consistently fail to translate that visual understanding into physics-aware design actions. Moreover, cascading agents through the pipeline exposes significant error propagation, where upstream perception mistakes compound into downstream design failures. These findings suggest that neither model scaling nor naive agent chaining suffices, and that closing the loop demands explicit physical grounding. PCFBench provides the community with a rigorous, multi-dimensional testbed to measure progress toward AI-assisted photonic engineering. The project is available at https://pcfbench.github.io/.

0.46

A Comprehensive Review of Large Language Models for Nanophotonics: From Surrogate Modeling to Autonomous Design

cs.LG physics.optics ·2026-08-18 ·Huanshu Zhang, Kegeng Tang, Lei Kang, Sawyer D. Campbell, Zihao Wang +1 more
published similarity 0.62
Abstract · Accepted for publication in Advanced Photonics

Metasurfaces have revolutionized the development of photonic devices by enabling unprecedented precision in light manipulation. However, their design processes are often constrained by computationally expensive simulations and complex high-dimensional design spaces. Although deep learning has accelerated the design process by serving as a surrogate model, it remains constrained by task-specific architectures and lacks universal reasoning capabilities. This review surveys how Large Language Models (LLMs) are adding semantic interfaces, code generation, and tool orchestration to established numerical nanophotonic workflows. We first outline the development from classical neural networks to transformer-based models and their applications in nanophotonic design. We then review the emergence of LLM-related methods in nanophotonics and organize them into two operational modes: surrogate models that treat structure-spectrum mapping as a language task, and agentic systems that have been demonstrated to generate code, orchestrate selected simulation steps, and support closed-loop optimization. Furthermore, to identify future cross-disciplinary opportunities, we briefly explore applications of LLMs in research fields such as materials science and wireless communications. This review concludes by looking ahead to the next generation of multimodal foundation models with physical perception capabilities. In this vision, artificial intelligence is evolving from passive tools into active collaborators, participating in autonomous scientific discovery.

0.61

AbsorbEvo: An Agentic Framework for Autonomous Inverse Design of Microwave Absorbers

cs.AI ·2026-10-01 ·Zhicheng Feng, Yubo Zhao, Xuefeng Yao
similarity 0.61
Abstract

Designing high-performance microwave absorbers requires specialized expertise in electromagnetic theory, materials science and simulation programming, and entails time-consuming optimization. Here, we present AbsorbEvo, an agentic framework for autonomous inverse design that translates natural-language performance objectives into designs verified by full-wave simulations. Its candidate evolution strategy integrates language reasoning, physics-based prediction and historical feedback. A large language model proposes the directions and magnitudes of parameter adjustments based on task objectives and computational history. The system combines directed increments with global sampling to generate candidates and uses a low-cost predictive model as a physics prior to rank them. Only high-ranking designs undergo full-wave simulation. Results passing physical validity checks are used to evaluate performance and guide subsequent search. Experience from training tasks is further distilled into textual skills, which are independently validated before use in new tasks. Under identical proposal budgets on held-out AbsorbBench-36 tasks, AbsorbEvo achieved a task success rate of 79.17%, versus 25.00% for a generic agent and 12.50% for random search. Its mean best coverage was 0.7816, compared with 0.6434 and 0.6448, respectively. By integrating language reasoning and physics-based feedback into design decisions, AbsorbEvo provides a methodological foundation for natural-language-driven autonomous inverse design of microwave absorbers.

0.25

PISim: A Unified Photonic Inference Simulator for Hardware-Aware Cross-Layer Design-Space Exploration

cs.AI physics.optics ·2026-11-12 ·Andreas Falkenberg
similarity 0.60
Abstract · 8 pages, 2 figures

Photonic neural accelerators offer ultra-low latency linear algebra, yet their usable numerical precision, sustainable throughput, and application accuracy remain tightly bounded by surrounding electro-optical interfaces and physical non-idealities. Pre-fabrication design-space exploration (DSE) requires a cross-layer electronic design automation (EDA) framework capable of evaluating disparate optical topologies under identical neural workloads and physical assumptions. We present \textbf{PISim}, a unified Photonic Inference Simulator that couples pretrained deep neural network execution with physics-based models of six accelerator architecture families, six electro-optic modulator technologies, four optical source organizations, and direct or coherent readout schemes. PISim embeds stage-resolved impairment operators---covering control and analog-to-digital quantization, finite extinction ratio, shot noise, correlated relative-intensity noise (RIN), thermal drift, propagation loss, and channel crosstalk---alongside an analytical cycle-level interface timing model to expose electronic-optical bottlenecks. Using simulated MNIST multilayer perceptron (MLP) benchmarks, we demonstrate how PISim identifies optimal precision operating points under multi-impairment stress (peaking at 6 bits for Mach--Zehnder and microring modulators), quantifies a 52.5 percentage-point accuracy gap between VCSEL-array and parallel-fanout laser architectures arising, under the modeled conditions, from power partitioning and correlated source noise, and models interface-limited throughput scaling across emitter-array widths from 32 to 128 channels. This comprehensive framework establishes an extensible, reproducible foundation for accuracy-constrained Pareto optimization prior to photonic tape-out.

0.25

Scaling Inference Prefill with High-Radix Photonic Interconnects

cs.DC cs.AR ·2026-09-01 ·Arulselvan Madhavan, Peter Carson, Taylor Groves, Thomas Graham
published similarity 0.60
Abstract

With the rise of inference as today's dominant AI workload, the industry is transitioning to high-bandwidth photonic interconnects to meet the large scale-up requirements of increasingly complex Mixture-of-Experts (MoE) models. This paper quantifies the benefits of 3D-integrated photonic interconnects for inference prefill by analyzing tradeoffs between high-concurrency throughput for Large Language Model (LLM) chat and the large context windows typically required for reasoning and agentic AI. We simulate three MoE models: short context (1K--8K tokens), medium context (128K tokens), and long context (1M tokens). We evaluate this workload across existing copper-based GPU systems and one with high bandwidth integrated photonics. We show 2.1--3.2x latency improvements in the stressed high-batch regimes and 2.8--5.8x improvements over baselines in communication-limited configurations. 3D photonics enable the 1152-GPU footprint required to lower time-to-first-token, yielding 2.2--4.5x speedups across production-grade platforms when electrical systems cross their inherent scale-up-pod limits.

0.24

OpenLayout: An Open and Agentic-Driven Platform for Holistic VLSI Physical Design and Benchmarking

cs.AR ·2026-11-13 ·Qiufeng Li, Sizhe Tang, Quan Cheng, Zirui Wang, Wantong Li +2 more
publishedbenchmarkpositioncode/data similarity 0.58
Abstract · Accepted by ICCAD2026

Physical design automation of very large-scale integrated circuits (VLSI) has made significant strides, progressing from single-stage placement and routing toward increasingly integrated full-flow implementation. Yet, existing approaches struggle with the vast design space optimization (DSO) arising from diverse technology nodes, circuit designs, and varied constraints. The substantial runtime of physical-design tools further exacerbates this challenge, leaving industrial workflows heavily dependent on experienced engineers to navigate the design space and achieve power, performance, and area (PPA) targets, incurring significant engineering effort. We argue that large language models (LLMs) with strong reasoning capabilities, enriched with distilled human design expertise, offer a promising path toward efficient and automated DSO. Unlike traditional algorithms, LLMs can interpret complex design contexts and naturally incorporate human expertise expressed in natural language for reasoning, acting, observing, and adapting throughout the design process, a capability that conventional optimization methods cannot exploit. To this end, we present OpenLayout, an agentic platform that leverages multi-agent collaboration with embedded design knowledge to enable self-iterative DSO. We further introduce OpenLayout-Bench, a benchmark targeting advanced technology nodes with commercial EDA tools to systematically evaluate physical design automation capabilities of LLMs. Experimental results demonstrate that OpenLayout achieves state-of-the-art performance, with approximately 20% accuracy improvement over baseline methods. Our work is open-sourced at https://github.com/fenggev56/OpenLayout

0.44

LensDesigner: A Self-Improving Agent for Optical Lens Design

cs.CV ·2026-09-24 ·Lei Sun, Haoran Liang, Dannong Xu, Yao Gao, Yuyu Geng +4 more
benchmark similarity 0.56
Abstract

Optical lens design is a complex, non-convex optimization challenge that relies heavily on human experience and intuition. Existing optimized-based automatic lens design methods struggle to navigate this vast parameter space without meticulous manual tuning. In this paper, we present LensDesigner, an autonomous agent framework that mirrors the problem-solving workflow of expert opticians. To overcome the initial cold start problem, we construct LensLib100K, an extensive optical lens library, and employ Optics-Aware Retrieval to supply physically valid structural seeds. Within an interactive physical simulation environment, the agent executes macroscopic orchestration while receiving immediate optical feedback. Furthermore, we introduce a continuous self-evolving mechanism guided by a curriculum agent. By iteratively solving design tasks with progressively increasing difficulty, the agent autonomously extracts, accumulates, and reuses design heuristics, effectively evolving its optical lens design expertise over time. At the evaluation level, we introduce LensArena, a standardized evaluation benchmark comprising $120$ diverse optical design tasks, covering extreme configurations. Extensive experiments on this benchmark demonstrate that LensDesigner significantly outperforms publicly available baseline algorithms, achieving superior success rates and optimization efficiency. We hope this work sheds light on the emerging field of intelligent optics. The code will be publicly available.

0.39