CS Paper Radar

Advantage-level Aggregation Reinforcement Learning for X-point Target Magnetic Configuration Control in an EXL-50U Experiment-Calibrated Simulation Environment

Siqi Ding, Xuanhe Wang, Pei Guo, Guoyang Shi, Changquan Yu, Yiting Wang, Xianming Song, Xiang Gu, Zhengyuan Chen, Lei Xing, Yapeng Zhang, Jianguo Chen, Tianyuan Liu

cs.AI physics.plasm-ph ·submitted 2026-08-21 08:00 UTC · v1

Abstract

Managing divertor heat loads is a central challenge for compact, high-power tokamaks. To increase local flux expansion and decouple the dissipation volume from the core, EHL-2 adopts the X-point target (XPT) divertor. This requires the secondary X-point to remain on the divertor leg; displacement degrades the topology and exhaust geometry. Current experiments, including EXL-50U discharges, rely on precomputed feedforward waveforms with PID loops on global quantities. Lacking dedicated closed-loop feedback for the secondary null, XPT operation is repeatable but not routine. We formulate XPT feedback as a multi-objective reinforcement learning (RL) control problem in a free-boundary environment calibrated to EXL-50U discharge #13906. To address strong coupling among plasma current, shape, and null constraints - where reward scalarisation collapses objective-specific temporal credit - we develop Advantage Aggregation (AdvA). AdvA preserves objective-wise temporal credit before worst-objective-aware nonlinear scalarisation and introduces a residual correction to policy updates. AdvA-PPO is evaluated against Reward-PPO and a feedforward-plus-PID baseline under nominal operation, measurement uncertainties, and unseen initial equilibria. On a 500 ms rollout, AdvA-PPO raises the mean worst-channel score from 0.23 to 0.81 over Reward-PPO, reducing X-point flux RMSE by ~20x. Under combined measurement uncertainties, it is the only learned controller completing the horizon while retaining a usable XPT shape. Multi-initialization fine-tuning enables a single AdvA-PPO policy to complete full-horizon operation across divertor and limiter initial equilibria. These results provide a simulation-based foundation for future real-time XPT validation on EXL-50U.

Closest papers

Nearest neighbours by meaning across the whole index.

Reinforcement Learning Controllers for Fusion Scenario Development

cs.LG physics.plasm-ph ·2026-10-19 ·Evgeny Adishchev, Maxim Nurgaliev, Dmitry Sorokin, Alexander Granovsky, Maksim Stokolesov +3 more
similarity 0.73
Abstract

Scenario development, the design of the waveforms that take a tokamak discharge from breakdown to flat-top, is still an iterative, labour-intensive process. Every candidate scenario has to be simulated with a controller in the loop, and the classical shape and current controllers need low-level actuator references. So the process is iterative and includes a number of trial-and-error steps. We propose to replace the per-scenario controller tuning by a single goal-conditioned reinforcement-learning controller trained once, in advance, against a free-boundary equilibrium and transport simulator. A scenario is then specified only by the target waveforms of the physical quantities of interest (plasma current, line-averaged electron density, LCFS shape, x-point positions), and the controller produces the coil-current and fueling commands that realize them. We demonstrate the approach on an EAST plasma-current ramp-up: the controller takes over a small limited plasma, ramps the current and the density, grows the cross-section, forms two x-points and holds a double-null diverted configuration against sampled shape targets for the rest of a 1.2 s episode. The neural network controller is trained using TQC algorithm. On 1024 test scenarios sampled from a low-discrepancy scrambled Sobol sequence in 11-dimensional target space, the controller forms the divertor in 86% of the cases, holds it for more than 0.5 s in 67% and reaches the end of the episode in a diverted state in 58%, with flat-top tracking errors of a few kA in plasma current, $\sim 0.15\times10^{19}$ m$^{-3}$ in density, $\sim 2$ cm in position and $\sim 8$ cm in x-point location; the failures concentrate at the high-current density ($J$) region which is believed to be physically or from engineering perspective not feasible within ohmic mode.

0.13

From Forecasting to Feedback: Evaluating Learned Dynamics for Tokamak Control

cs.AI physics.plasm-phcs.LG ·2026-10-27 ·Guoyang Shi, Siqi Ding, Xuanhe Wang, Pei Guo, Changquan Yu +5 more
similarity 0.64
Abstract

Learned temporal models are moving beyond offline forecasting toward interactive environments for decision making, yet logged-trajectory accuracy need not predict closed-loop behavior under policies optimized in the learned model. This forecasting-control gap matters in tokamak magnetic control, where coupled plasma-circuit dynamics and actuator constraints can amplify errors through feedback. Using a calibrated free-boundary Grad-Shafranov solver, we collect four datasets in a 2x2 design over physics-parameter and current-reference coverage. At matched budgets of 500, 1k, 3k, and 5k rollouts, we train 16 action-conditioned Transformers; PPO policies optimized in the 5k surrogates are then evaluated without adaptation on six reference-solver conditions. Only joint-coverage D4 shows monotonically decreasing cross-condition mean error, whereas D1 improves in distribution but degrades out of distribution. Binary completion masks substantial closed-loop differences: D2-D4 each complete 83.3% of conditions, but reach on average 99.0%, 94.7%, and 90.5% of the evaluation horizon, while their worst conditions reach 94.2%, 68.2%, and 43.2%. Policies trained with action noise complete 5/24 matched conditions, compared with 19/24 under nominal training, and have a lower mean horizon-capped episode length. Based on one trained policy per configuration and one evaluation realization per condition, the results support combining prediction error, episode completion, condition-level duration, and tracking quality.

0.17

Bayesian Optimisation under State-Preservation Constraints

cs.LG ·2026-10-08 ·Gabriel Diaz-Aylwin, Vignesh Gopakumar, Omkar Myatra, David Moulton, Lorenzo Zanisi +2 more
similarity 0.58
Abstract

In many engineering design problems, the objective and constraints depend on the state: the solution of a PDE determined by the design parameters. We consider improving a design while holding selected state observables near trusted values, which we call state preservation constraints. Constrained Bayesian optimisation handles these with a learnt feasibility model, but struggles with this problem's highly anisotropic feasible set. Our central idea is to pre-compute the set of controls whose linearised constraint response stays within tolerance, thereby pulling back the state-space constraint into design space. This linearisation defines an ellipsoid from which we can efficiently draw a large number of well-spread candidates. The underlying linear response map is refined online, and the ellipsoid is rebuilt accordingly. We demonstrate the method end-to-end on our key application - Tokamak divertor optimisation under plasma-boundary preservation.

0.25

Augmenting PID Control with Deep Reinforcement Learning: A Hybrid Approach to the Industrial Benchmark

cs.LG ·2026-09-18 ·Zhengyang, Gu, Joseph E. Hernandez, John Burtenshaw, Sean Scott +2 more
top venuebenchmark similarity 0.56
Abstract · Published in: 2026 7th International Conference on Artificial Intelligence, Robotics, and Control (AIRC)

As industrial processes grow in complexity, traditional Proportional-Integral-Derivative (PID) controllers are often insufficient for handling their non-linear, multi-input dynamics. We propose using advanced Deep Reinforcement Learning (DRL) to prove its advantages in these complex environments. To do this, we rely on the Industrial Benchmark (IB). The IB is a realistic simulation that tests DRL algorithms against the key challenges of industrial applications: high-dimensional state spaces, delayed effects, and conflicting multi-criterial objectives. This testbed highlights DRL's core trade-off: while its final policies can often be unstable, its unique strength is the ability to autonomously discover optimal, non-obvious policies in multi-dimensional spaces where simple controllers fail. In this paper, we propose a novel hybrid PID-RL controller that leverages DRL's discovery capability while ensuring Reliability. After developing a multi-objective reward function to make DRL viable, we use a twin-delayed deep deterministic (TD3) agent as a discovery tool to find the optimal, non-obvious settings for the IB's 'Gain' and 'Shift' parameters. By feeding these discovered parameters to a simple, tuned PID controller, our hybrid model successfully combines all three characteristics: it achieves the optimal Performance and Efficiency of the best DRL agent with the Reliability of a classical controller. This work demonstrates a practical methodology for using DRL to augment, rather than replace, trusted industrial control systems.

0.47

LLM-Enhanced Deep Reinforcement Learning with Human-in-the-Loop Calibration for Real-Time Optimal Power Flow

eess.SY cs.AI ·2026-11-11 ·Jiayang Tu, Bozhen Jiang, Bojun Du, Yunxiao Ling, Ershun Du +1 more
similarity 0.55
Abstract

Real-time optimal power flow (RT-OPF) requires fast and reliable decision-making under time-varying operating conditions. However, many practical operating preferences and safety related requirements are difficult to encode using conventional numerical rewards alone, which limits the effectiveness and controllability of deep reinforcement learning (DRL) for RT-OPF. To address this issue, this paper proposes an LLM-enhanced DRL framework with human-in-the-loop (HITL) for RT-OPF. The proposed method augments the physics-based reward with sparse language evaluative feedback during offline training, so that semantic operational requirements can be incorporated into policy learning. To improve reliability in RT-OPF, a selective HITL calibration mechanism is further introduced to inspect and correct questionable LLM judgments before they continuously shape the learning process. Case studies on the IEEE 30-bus and IEEE 118-bus systems show that LLM feedback improves policy safety over vanilla TD3, while further HITL calibration achieves the best overall performance and more stable training behavior. These results demonstrate the effectiveness of combining language guidance and expert calibration for RT-OPF.

0.14

Parameter Exploration for RLVR via Variational Learning

cs.LG cs.AIcs.CL ·2026-08-10 ·Vatsal Venkatkrishna, Nico Carlsen Daheim, Iryna Gurevych
top venue similarity 0.55
Abstract · Accepted at the NeurIPS 2026

Exploration has been a focus of reinforcement learning research for a long time. Recently, there has been growing evidence that it is also an important ingredient in LLM reinforcement learning recipes that can significantly impact downstream performance. Many existing methods control exploration in the action-space, for example, using temperature scaling. However, these methods cannot reorder tokens but only influence the variance in the output distribution. This limits exploration and can lead to divergence or stalled training. Here, we investigate parameter-space exploration, where rollouts are generated by sampling different policies from a posterior that may each explore different rollouts. Sampling less or more diverse policies is then a complementary control lever over exploration. We introduce a family of methods called Perturbed Parameter Policy Optimization (3PO) which use different sampling strategies and different rollout grouping for reward estimation. Experiments on Olmo-3-1025-7B and Qwen2.5-Math-7B across mathematical reasoning and code generation tasks show that these approaches can improve the average downstream performance over standard GRPO at a near-identical FLOPs cost. Moreover, using multiple parameter samples generally produces fewer zero-advantage groups and malformed or incorrect rollouts during training than GRPO and action-space baselines. Overall, our work presents evidence that parameter-space exploration can improve reinforcement learning for LLMs.

0.61

A Generative Foundation Model for Multimodal Tokamak Tasks

cs.AI cs.CE ·2026-11-05 ·Yingshuai Ji, Haodong Feng, Guohong Deng, Gelin Bian, Yue Wang
benchmark similarity 0.54
Abstract

Tokamak experiments record diverse measurements, including waveforms, profiles, fields, and scalars, which are used to reconstruct the plasma, forecast its evolution, recover associated control signals, and estimate disruption risk. Most models are built separately for one task and a fixed set of inputs and outputs, and each relies on a prescribed subset of diagnostics rather than structuring the full multimodal observation set to extract global, cross-signal information about the discharge. These limitations motivate a reusable foundation model that adapts to each task's input-output schema and models heterogeneous target signals jointly, rather than retraining a separate model for every configuration. In this work, we extend the TokaMark benchmark with two groups of tasks for actuator action inversion and disruption prediction, yielding 20 MAST tasks in six groups with explicit schemas and evaluation protocols. Then, we introduce GenToka, a generative tokamak foundation model that jointly generates schema-selected targets through a shared conditional diffusion Transformer, with signal-specific codecs preserving native time series, profiles, fields, and scalars; foundation pretraining and task-specific adaptation transfer cross-signal structure across all six groups. Evaluation on MAST measurements shows that GenToka reduces macro-average normalized root mean squared error relative to TokaMind by 4.7% on Groups 1-4 and by 17.7% on Group 5, and improves macro-average window-level F1 on Group 6 by 8.4% at a common validation-selected threshold. GenToka provides a reusable, generative, and multimodal pathway for experimental tokamaks, linking plasma-state reconstruction, actuator inference, and disruption warning from shared measurements to support more integrated, data-driven fusion plasma prediction and control research.

0.21

Equation Recast for Canonical Operator Learning Across Parametric PDEs

cs.LG physics.comp-phphysics.plasm-ph ·2026-09-02 ·Qiyun Cheng, Valentin Duruisseaux, Cesar F. Clauser, Md Hossain Sahadath, Huihua Yang +5 more
similarity 0.53
Abstract

Learning solution operators across broad parameter ranges can require substantial coverage of both input functions and physical parameters, particularly for purely data-driven parametric models. In addition, the resulting models may fail silently outside the training distribution. We introduce equation recast, which reformulates parametric operator learning as the learning of a single canonical operator. Parameter-induced operator variations are derived analytically from the governing equation and absorbed into effective sources, enabling zero-shot prediction across new parameter regimes. Across multi-parameter, nonlinear, and singular PDE settings, equation recast supports extrapolation, integrates sparse heterogeneous datasets in a shared canonical representation, and uses loss of convergence as an internal warning signal for failure of the recast iteration. In high-fidelity tokamak simulations for nuclear fusion, the framework unifies electron-temperature data across four device geometries through canonical-domain mapping within one jointly trained operator. Equation recast provides a route toward reusable neural PDE solvers combining equation-guided transfer, data efficiency, and monitorable inference.

0.14