CS Paper Radar

Llama-Mobile: Efficient 2.7-Bit Quantization of VLMs

Luka Ribar, Jeevan Bhoot, Douglas Orr

cs.CV cs.LG ·submitted 2026-08-21 14:10 UTC · v2

Abstract

Deploying vision-language models (VLMs) on mobile devices is challenging due to their significant memory and compute requirements. We present a framework for quantizing VLMs for efficient inference on resource-constrained hardware. Our approach combines a quantization pipeline that uses the model itself to generate training data and does not require access to the training setup, with a novel 2.7-bit-per-parameter format supporting efficient execution on Arm CPUs. We validate our approach by compressing the Llama 3.2 11B Vision Instruct model to 3.7 GB with 8-bit activations, preserving strong performance on a set of standard visual question answering tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

MoMoVL: Modality-Aware Adaptive Compression for On-Device Sparsely-Activated Vision-Language Models

cs.CV cs.LG ·2026-11-18 ·Dongkeun Lee, Wonjun Lee
publishedcode/data similarity 0.78
Abstract · 11 pages, 6 figures, Accepted at WSDM 2027 Findings

The rise of the agentic web has been accompanied by growing demand for on-device Vision-Language Models (VLMs) that perform diverse cross-modal web tasks with enhanced privacy and reduced latency. Mixture-of-Experts (MoE) models are widely adopted in modern VLMs for compute-efficient scalability, yet their multi-expert architecture poses deployment challenges due to substantial memory demands. Mixed-precision quantization is an effective compression technique that reduces bit-widths while adapting to the heterogeneous hardware budgets of edge devices, particularly well-suited for MoE due to its inherent structural sparsity, which causes imbalanced importance among experts. While prior work has applied quantization for efficient MoE inference at the edge, we point out that in MoE-based VLMs, the modality-specific characteristics of visual and text tokens further impact expert quantization. To address this issue, we present MoMoVL, a modality-aware adaptive compression framework for MoE-based VLMs that brings vision-language inference within reach of on-device resource budgets. Motivated by our empirical findings on modality-induced disparities across experts, MoMoVL jointly exploits the per-expert activation profile and per-modality quantization sensitivity to guide bit-width assignment. Experimental results show that MoMoVL improves the accuracy-compression trade-off relative to state-of-the-art mixed-precision baselines and reduces memory footprint by up to 15.44% with a modest drop in accuracy over its uniform-precision baseline. Our code and data are publicly available at https://github.com/sco-edge/MoMoVL.

0.60

P4Q: Co-designing Token Pruning and Quantization for Vision-Language Model Acceleration

cs.CV ·2026-09-28 ·Haizhao Jing, Zhenhao Shang, Haokui Zhang, Rong Xiao, Peng Wang
similarity 0.74
Abstract

Vision language models have achieved strong performance across a wide range of multimodal applications, yet their substantial computational and memory costs hinder efficient deployment. Visual token pruning and post-training quantization reduce inference overhead along two complementary dimensions, namely sequence length and numerical precision. Existing workflows typically optimize these techniques independently or apply them sequentially. Their distinct optimization objectives leave critical interactions unaddressed and constrain the achievable compression performance. We revisit these designs and present P4Q, a practical co-design framework that jointly optimizes visual token pruning and low-bit quantization for efficient VLM inference. First, P4Q introduces a quantization-aware visual token selection strategy before the LLM. It applies fake quantization to copies of the features produced by the projector and selects visual tokens using statistics computed from these fake-quantized features, thereby conditioning the selector's feature-based decisions on simulated low-bit perturbations. Second, P4Q introduces a pruning-aware quantization calibration strategy. It uses the same selection strategy as pruning to calibrate the quantized model on the retained-token distribution, thereby aligning the calibration process with the pruned execution path used during deployment. By coupling these two components, P4Q achieves substantial inference speedups while maintaining comparable task performance, resulting in a better efficiency-accuracy trade-off than independently optimized pipelines. For instance, on LLaVA-NeXT, P4Q achieves an average end-to-end inference speedup of 2.8x across eight distinct test sets, while retaining higher accuracy than prior compression and quantization methods.

0.18

ProQuant: Progressive Quantization-aware Training for Edge MLLMs

cs.CV cs.CL ·2026-11-05 ·Yufei Xue, Yushi Huang, Jiawei Shao, Pingcheng Dong, Yonghao Tan +3 more
code/data similarity 0.72
Abstract

Multi-modal large language models (MLLMs) with impressive perception and understanding capabilities will enable a range of downstream applications. However, their substantial computational and memory requirements hinder the real-world implementation, particularly for resource-constrained edge devices. Quantization has emerged as an effective solution for deploying large models. While post-training quantization (PTQ) successfully retains the performance at moderate bit-width (e.g., W8A8), it suffers from severe performance degradation under low-bit quantization (e.g., W4A8), especially for small-scale models that are more suitable for edge deployment. In this paper, we propose ProQuant, a novel weight-activation quantization-aware training (QAT) framework tailored for low-bit MLLMs. First, to align the limited finetuning dataset distribution with the pretrained dataset distribution, we propose a self-relabeling (SRL) scheme to resample the responses of the open-source multimodal dataset. Second, we are the first to take a decoupled view of multi-modal (MM) understanding and language modeling abilities. We propose a progressive block activation (PBA) mechanism to prioritize the MM understanding recovery. We also introduce a vision-sensitive factor $\vecτ$ that effectively identifies the MM-critical layers. Extensive experiments across various benchmarks, covering models with 2B-8B parameters, show that ProQuant significantly outperforms existing methods. For example, our W4A8 Qwen3-VL-2B-Instruct improves average accuracy by impressively 6.6% and achieves performance comparable to full precision counterparts with only approximately 1% performance drop. Code is available at https://github.com/yufeixue-ai/ProQuant/.

0.28

Large Models for Small Devices: Recent Advances and Empirical Analysis of Edge AI Deployment

cs.AI cs.LG ·2026-08-16 ·Subhransu Das, Jiaming Cheng, Arnav Kumar, Sadia Afrose, Mingzhe Han +4 more
publishedsurveycode/data similarity 0.72
Abstract · Parts of this work were presented at the IEEE Consumer Communications & Networking Conference (CCNC), Las Vegas, NV, USA, January 2026

Running large AI models on resource-constrained edge devices requires model compression to reduce model size and computation. What compresses well, however, need not deploy well. We survey dozens of recent works that report compression results on real hardware and extract practical deployment guidelines from them. Following these guidelines, we deploy compact language and image models on GPU, CPU, and Raspberry Pi platforms across question answering and image segmentation. No single technique wins across tasks. For question answering, Qwen3.5 0.8B reaches 93.85 SQuAD F1 and 92 EM under Q5_K_M GGUF quantization, while structured pruning at the same precision costs 16 F1 at a 1% ratio. For segmentation, the ranking reverses: default quantization leaves parameters and MACs unchanged, whereas pruning cuts model size by nearly 80% at near-constant mIoU. Pruning can even inflate the deployed artifact by 21-49% by breaking k-quant super-block alignment; combined with longer, less format-compliant outputs, this raises Raspberry Pi latency up to 3.4x. Compression can also manufacture the appearance of competence rather than destroy it visibly: one LoRA-recovered variant stays fully parseable and holds 71% strict BoolQ accuracy while sending 97 of 100 predictions to a single class, at 52.6% balanced accuracy. We explain these effects through neural-flow graph analysis and prefill-decode-level latency decomposition, and condense them into task-specific deployment research directions. The right technique depends on the task, the model, and the hardware. Our experiment code and artifacts are open-sourced at https://github.com/Arnavvvkumar/deployment

0.42

VLCQ: Post-training quantization for deep neural networks using variable length coding

cs.CV cs.AIcs.PF ·2026-10-10 ·Reem Abdel-Salam, Ahmed H. Abdel-Gawad, Amr G. Wassal
publishedhighly cited similarity 0.71
Abstract · Published in Future Generation Computer Systems, Volume 166 (2025), Article 107654

Quantization plays a crucial role in efficiently deploying deep learning models on resource-constrained devices. Post-training quantization does not require access to the original dataset or retraining the full model. Current methods that achieve high performance close to baseline results typically require INT8 fixed-point integers. However, achieving higher model compression with lower bit-widths often leads to significant performance degradation. In this paper, we propose VLCQ, a post-training quantization method that relaxes the fixed-point encoding constraint, enabling more flexible exploration of quantization techniques through variable-length encoding. This approach achieves competitive or improved performance while reducing bit-widths, without requiring access to training data or model fine-tuning. Extensive experiments on image classification, segmentation, and object detection demonstrate that VLCQ improves model compression and accuracy compared with state-of-the-art post-training quantization approaches. For per-channel quantization, VLCQ surpasses FP32 accuracy and Piece-Wise Linear Quantization (PWLQ) on most evaluated models, achieving up to 6x compression compared with FP32 and up to 1.7x compared with PWLQ. When prioritizing compression with limited accuracy loss, VLCQ achieves up to 12.25x compression compared with FP32 with less than 4% performance degradation. For per-tensor quantization, VLCQ is competitive with Data-Free Quantization (DFQ), while providing greater flexibility to achieve lower bit rates across different tasks and models.

0.57

BitLLM: Efficient Low-Bit, Conversion-Hiding LLM Decoding on Mobile GPUs

cs.AR cs.LGcs.OScs.PF ·2026-10-31 ·Hangyu Zheng, Zhihao Shu, Kunxiong Zhu, Minghai Qin, Xiaolong Ma +2 more
top venue similarity 0.70
Abstract

The rapid scaling of large language models (LLMs) has unlocked remarkable capabilities across various domains. However, deploying LLMs on mobile devices remains challenging because of their high computational and memory requirements. Low-bit quantization (e.g., 4-bit weights, 8-bit activations) can reduce model size while preserving accuracy, but its practical efficacy on mobile GPUs has been limited so far. In this paper, we identify that the performance gap stems primarily from frequent data type conversions between quantized and floating-point values, and dynamic and inefficient memory access patterns caused by the growing Key-Value (KV) cache during autoregressive decoding. We introduce BitLLM, a mobile inference engine that addresses type conversion overhead and suboptimal memory accesses in quantized LLMs. Our approach features an adaptive layout and packing strategy for the KV cache that ensures efficient memory access throughout LLM decoding. This is coupled with an integer-native execution pipeline that defers and overlaps type conversion outside the compute hot path, keeping the critical MatMul stages in the integer domain. Implemented on off-the-shelf mobile GPUs, BitLLM outperforms leading engines, i.e., LLAMA.CPP, MNN-LLM, LiteRT-LM, and MLC-LLM, achieving average speedups of 1.78$\times$, 1.73$\times$, 1.58$\times$, and 1.47$\times$, respectively, across various models and quantization levels. Under long-context generation, BitLLM reduces average energy consumption (per token) by up to 88.9%.

0.57

Not All Error Yields to Scale: Where Scaling Stops in Vision-Language Inference

cs.CV cs.AI ·2026-10-01 ·Xinye Zhao, Yunkai Dang, Yunchen Wu, Wenbin Li
similarity 0.70
Abstract

Vision-language models (VLMs) face a fixed-budget trade-off between processing more visual information for fine-grained perception and using a larger language backbone for complex reasoning. Existing studies do not tell us which combination of backbone size and input resolution to deploy, especially in high-resolution deployments. To address this gap, we propose the Separable Law that describes how VLM performance changes with language backbone size and visual token count. We fit the law to measurements from 26 InternVL and QwenVL models, with language backbone sizes from 1B to 72B, on four high-resolution benchmarks with image sizes from 224 pixels to 8K. We find that the questions responding to scaling can be predicted from the skill they require, while a substantial fraction never responds at all. We also find that the two model families gain similarly from a larger backbone, while their gains from more visual tokens differ sharply. Combined with a cost law, the Separable Law gives a closed-form rule for allocating compute between backbone size and visual tokens. When deployment is limited to available configurations, the law identifies model and image sizes that perform close to the best feasible choice under the same budget. We hope our work offers a principled way to decide how much a model should be allowed to see at high resolution, given what it must reason about.

0.43

EdgeVLN: Runtime-Aware Deployment Ready Quantized Vision Language Navigation Model

cs.RO cs.CV ·2026-09-28 ·Rithvik Jonna, Man Namgung, Aakash Gurram, Tinoosh Mohsenin
similarity 0.70
Abstract

Vision-language navigation (VLN) models perform well but target compute-rich platforms, limiting deployment on memory- and power-constrained robotic edge devices. Compression alone does not establish whether a VLN model fits the memory, latency, and energy budgets of an edge platform while preserving navigation behavior. We introduce EdgeVLN, a runtime-aware, deployment-ready quantized VLN model that closes this gap. EdgeVLN combines a quantized StreamVLN model with Latent Trajectory Termination Extractor (LATTE), a lightweight causal transformer that improves real-time stopping by predicting a Stop Action verifier rank. Both execute through our llama.cpp VLN driver, which reconstructs streaming context and prunes memory tokens on-board. We characterize a pretrained StreamVLN backbone across weight quantization from 8 to 2 bits and multiple inference runtimes to identify a feasible operating point. LATTE reuses backbone hidden states within the budget freed by quantization, requiring neither a second vision encoder nor an additional backbone forward pass. We evaluate six backbone precisions and seven candidate stop heads on BF16 and IQ4 NL across all 1,839 R2R VLN-CE val-unseen episodes. We measure success rate (SR) in simulation and latency, energy, and resident memory on an NVIDIA Jetson Orin NX 16 GB. LATTE achieves our highest SR, 58.02 percent on the deployed 4-bit model, exceeding the BF16 baseline with only 0.013 s additional latency per navigation step. Four-bit formats achieve nearly identical SR, but step energy varies 36.8 times by execution path. Only IQ4 NL under our VLN driver fits the board, using 11.35 GB resident memory while running 20.8 times faster and using 13.3 times less energy than storage-streamed BF16. INT2 collapses. Runtime selection, memory-token pruning, and quantization are essential for efficient edge deployment.

0.24