CS Paper Radar

CLSC DETR: Reliable Candidate Ranking via Cross Layer Geometric Support for UAV Small Object Detection

Junyan Lin

cs.CV ·submitted 2026-08-20 14:37 UTC · v1

Abstract

Unmanned aerial vehicle (UAV) object detection is critical for applications such as target search, where accurate detection of small objects in complex aerial scenes remains challenging. The limited spatial extent, dense distribution, and frequent occlusion of small objects make reliable candidate ranking particularly difficult. Existing Detection Transformer (DETR) based methods improve ranking by estimating localization quality from individual queries and incorporating it into classification scores. However, a single query often lacks sufficient geometric evidence for small objects with weak boundary cues, resulting in unreliable quality estimation and unstable ranking. To address this limitation, we propose Cross Layer Local Support and Consistency Calibration for DETR, termed CLSC DETR. Specifically, the Cross Layer Local Support module establishes correspondences between final layer queries and intermediate layer candidates to aggregate complementary geometric evidence for more reliable localization quality estimation, while the Classification and Localization Consistency Calibration module adaptively adjusts classification scores according to localization quality and classification reliability to improve candidate ranking. Experiments show that CLSC DETR improves AP and AP$_{75}$ over the baseline by 1.5\% and 2.0\% on VisDrone, respectively, while achieving consistent improvements on UAVDT.

Closest papers

Nearest neighbours by meaning across the whole index.

Can Synthetic UAV Benchmarks Be Trusted? Real-Synthetic Validation for UAV Model Selection

cs.CV cs.RO ·2026-10-10 ·Yuyi Zhi, Min Du, Bill Shi, Guodong Yuan, Junheng Liang +2 more
benchmark similarity 0.64
Abstract · 8 pages, 5 figures

Synthetic UAV imagery can expand pre-deployment test evidence when task-specific Real data are scarce, but visual plausibility or semantic label alignment alone does not establish validity for model selection. We study when Synthetic evaluation preserves the model-selection conclusions obtained from Real UAV data through two complementary cases under fixed evaluation protocols. In a requirement-specific road-debris benchmark, four language-conditioned perception systems obtain lower absolute F1 on Synthetic data, yet the point-estimate ordering and top-ranked model are preserved; bootstrap analysis yields no supported pairwise reversal, and size-matched resampling preserves the top-model decision. In contrast, a closed-set stress test on a separately materialized business corpus, using four VisDrone-compatible detectors over eight empirically supported classes, changes the point-estimate top-ranked detector and reverses three of six pairwise point-estimate preference directions. A complementary audit of five UAV business scenarios further reveals substantial Real-Synthetic mismatch in class composition, object density, and target scale, including systematic under-representation of small targets. These results show that Synthetic UAV benchmark trust is conditional: semantic coverage is insufficient, and validity must be established empirically for the task, operating regime, and model panel of interest.

0.20

RiO-DETRv2: Geometry-Aware Uncertainty Modeling Meets Real-Time Oriented Object Detection Transformer

cs.CV ·2026-10-21 ·Zhangchi Hu, Zilong He, Yifan Zhao, Xiangyu Yu, Jie Chen +4 more
code/data similarity 0.63
Abstract · 14 pages, 7 figures, 10 tables

RiO-DETR is the first real-time end-to-end transformer for oriented object detection, yet further localization gains require a more expressive box representation. Although distributional regression has succeeded in horizontal DETRs, extending it to oriented detection introduces geometry-misaligned boundary modeling and topology-inconsistent orientation refinement. We present RiO-DETRv2, a geometry-aware uncertainty modeling framework for real-time oriented object detection. To resolve the geometry mismatch, Object-Aligned Boundary Distribution Refinement represents box boundaries as probability distributions in an object-aligned coordinate system and progressively refines them across decoder layers. For better orientation topology consistency, we introduce Circular-to-Local Angular Residual Refinement that transitions from global periodic search to local fine-grained estimation. Unified OBB Quality-Aligned Learning further aligns classification, boundary and angular refinement with complete-OBB localization quality. Together, these designs improve localization without compromising efficiency, achieving a better balance between speed and accuracy. Specifically, RiO-DETRv2-l/x achieves 53.7/54.1 mAP50-95 on DOTA, outperforming RiO-DETR-l/x by 1.2/1.5 points with nearly unchanged computational cost. Code is available at https://github.com/RicePasteM/RiO-DETRv2.

0.36

Correctness Metric Matters: NWD-Based Calibration Loss for Tiny Person Detection in UAV Infrared Imagery

cs.CV ·2026-11-09 ·Tian Zhang, Zhirong Su
similarity 0.61
Abstract

Detection calibration aligns predicted confidence with empirical correctness. Existing calibration losses inherit their correctness definition from box regression, specifically IoU against a hard threshold. We show that this target is geometrically ill-posed for tiny objects in UAV infrared imagery, where persons occupy less than 0.1\% of the image. The same pixel error is penalized more heavily as the target shrinks, so binary prediction calibration (BPC) actively suppresses confidences that should be high. On HIT-UAV, BPC with an IoU target degrades image-level localization-aware ECE (LaECE) from 0.0689 to 0.0761, 0.0649 to 0.0733, and 0.0653 to 0.0682 across Low, Mid, and High signal-to-clutter ratio (SCR) groups. We replace the IoU target with a continuous, scale-invariant normalized Wasserstein distance (NWD). The NWD target reduces LaECE\(_{\mathrm{NWD}}\) relative to BPC+IoU on all three groups (\(p<10^{-7}\)) with mAP neutral (0.9356 vs.\ 0.9347), and an independent center-offset anchor confirms that the gain is a genuine geometric correction. The improvement holds across a broad plateau of calibration weights. The NWD formulation requires no inference-time mapping layer. If a validation-fitted isotonic map is applied on top of it, calibration is lowered further, and the two corrections act on different components of the same error. The metric-level remedy has a measurable boundary. Target-background thermal pairing in the training distribution and detection-level aggregation under per-image detection-count heterogeneity lie outside it. Both are quantified independently of the NWD target.

0.24

Observation Quality in DSM-Assisted Aerial Localization: A Benchmark and Base-Anchored Uncertainty Calibration

cs.CV ·2026-10-13 ·Pengyu Yin, Jie Pan, Junxiang Tan, Mengqi Fu, Kun Cheng +1 more
benchmark similarity 0.60
Abstract · 15 pages, 7 figures, 7 tables. Submitted to IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Aerial map matching provides position observations for navigation, but a position error alone does not determine how an observation should be weighted. We define five benchmark tasks: position availability and agreement, grouped error structure, predictive uncertainty, controlled updates, and temporal accumulation. We use digital-surface-model-assisted localization to test whether base-anchored uncertainty calibration improves the weighting of unchanged position estimates. The method combines propagated image and map sensitivities with the second moment of a compact configuration subset relative to the reported position. Scale is fitted using separate position references without local surface-height ground truth. Thirteen covariance models are evaluated on two held-out query sets from locations represented in the calibration data. Using reference residuals, we compare the method with a constant full-matrix baseline. With all localization failures included, the method reduces the normalized position-update risk, averaged equally across locations, by 7.70% on 728 conditions and 5.46% on a separate 142 conditions under an independent prior. On the primary set, the equal-location average negative log likelihood on reference residuals improves by 2.571 nat. At these seen locations, exploratory base-only quality calibration and conditional-addition controls leave the incremental update benefit of configuration disagreement unresolved. Navigation benefit and real temporal accumulation remain untested.

0.23

LiG-DETR: Local-in-Global Reassembly in Latent Space for Aerial Object Detection

cs.CV ·2026-10-07 ·Yupeng Zhang, Fangzhuo Gao, Juntao Cheng, Ziyi Zhao, Liang Wan +1 more
similarity 0.60
Abstract

Aerial object detection faces substantial scale and density variations. Small objects are easily degraded by downsampling and feature compression, while medium and large objects require sufficient global context. Existing methods mainly follow two paradigms: image slicing provides clearer local evidence but relies on independent crop-level prediction and post-processing, whereas feature- and query-level optimization preserves unified inference but operates on already compressed full-image representations, limiting recovery of fine-grained information. This raises a key question: can aerial detection directly acquire high-fidelity local evidence before feature degradation and integrate it into a unified end-to-end framework? To this end, we propose LiG-DETR, an Efficient Global-Local Reassembly framework that reformulates image slicing as high-fidelity local feature acquisition. A shared encoder extracts global and locally magnified features, which are projected into the detector feature space. The projected local features are reassembled according to their original spatial locations to form a globally aligned local feature level, and a single DETR decoder jointly decodes global and local features. To reduce redundant computation, Context-Preserved Selective Reassembly focuses high-resolution encoding on informative regions while preserving a dense feature layout, and Density-Aware Adaptive Query Allocation adapts the decoder query budget using encoder proposal scores. Experiments show substantial gains on small and medium objects while retaining strong large-object performance, with favorable accuracy--efficiency trade-offs and improved cross-domain generalization. The code will be released.

0.25

OV3D-Bench: A Diagnostic Benchmark for Open-Vocabulary Monocular 3D Detection

cs.CV ·2026-08-17 ·Mariia Gladkova, Neehar Peri, Ishan Khatri, Deva Ramanan, Daniel Cremers
publishedbenchmarkcode/data similarity 0.59
Abstract · Accepted to OpenSUN3D workshop at ECCV'26; benchmark is released on https://github.com/mgladkova/ov3d-bench

Open-vocabulary monocular 3D detectors report strong in-domain performance, but each evaluates under a different protocol, several rely on per-image category oracles unavailable at deployment, and all collapse geometry and semantics into a single AP metric. To address this, we introduce OV3D-Bench, a diagnostic benchmark that compares open-vocabulary monocular 3D detectors under deployment-realistic conditions across seven indoor and outdoor datasets. Our benchmark replaces the per-image class name oracle with test-time dataset-level class name prompts, and decouples detection accuracy along three axes: localization, semantic robustness, and cross-domain transfer. We evaluate seven representative detectors and find that (i) they localize objects well yet often mislabel a correctly localized box as a semantically adjacent category; (ii) accuracy is highly sensitive to prompt phrasing (e.g. WildDet3D's performance collapses from 18.6 to 5.4 AP when prompted with "a detailed high-resolution photo of a car" rather than "car"); and (iii) the widely adopted target-aware protocol hides these errors (e.g. inflating DetAny3D's AP by 1.9 $\times$ on ScanNet). Lastly, we demonstrate that simply remapping a frozen closed-vocabulary detector's predictions using a contrastive vision-language encoder such as SigLIPv2 performs competitively against recent purpose-built open-vocabulary methods. This indicates that geometric localization is more mature, while open-vocabulary semantics remains the primary bottleneck.

0.37

PCLM: Small-target localization with frozen CLIP via prototype contrast and local magnification

cs.CV ·2026-10-04 ·Zhipeng Ye, Feng Jiang, Qiufeng Wang, Hao Li
similarity 0.59
Abstract

Small targets occupy few patches in a vision-language encoder, so spatial features often mix object appearance with surrounding content. We propose Prototype Contrast and Local Magnification (PCLM), a support-conditioned localization method that uses a frozen CLIP encoder. Five masked support images per class define foreground and background prototypes through equally weighted regional features. Their difference provides a shared scoring direction for query patches, explicitly comparing target evidence with the demonstrated background. Nine overlapping query windows are enlarged and encoded independently to sample small targets more densely. Reprojection and coverage averaging combine their scores into a continuous localization map. The class direction occupies 2 KiB regardless of support count and transfers unchanged across datasets with mapped categories. On 5,047 small-target queries from VOC, COCO, ADE20K and Oxford-IIIT Pets, PCLM achieves higher mean pixel AP than every evaluated text-conditioned localization baseline on each dataset under our evaluation protocol. Gains over the strongest scene-dataset baselines range from 5.63 to 13.23 percentage points. At comparable measured latency, local magnification improves scene small-target AP by 4.51 to 5.68 points over whole-canvas enlargement. Factorial experiments show that prototype contrast increases the benefit of local observation, including under matched image-coordinate filtering. Support-budget experiments show that additional examples refine category estimation without increasing representation size or query-time scoring cost.

0.24

DECO: Depth-Guided Co-Visibility Reasoning for Low-Altitude UAV Visual Localization

cs.CV ·2026-08-23 ·Yibin Ye, Xichao Teng, Shuo Chen, Xiaokai Song, Dongdong Guan +2 more
code/data similarity 0.59
Abstract

Unmanned aerial vehicles (UAVs) increasingly require robust visual localization in GNSS-denied environments. A common solution estimates UAV poses by matching keypoints between UAV images and geo-tagged orthographic reference maps derived from satellite or aerial imagery, followed by Perspective-\(n\)-Point (PnP) pose solving. However, such reference maps mainly record top-down surfaces such as roofs and ground planes, while vertical structures such as facades and walls are often compressed or missing. Consequently, many visually distinctive keypoints in low-altitude UAV images have no valid counterparts in the reference map, leading to redundant matches and inaccurate pose estimation. To address this issue, we propose DECO, a DEpth-guided CO-visibility reasoning framework for low-altitude UAV visual localization. DECO uses monocular depth priors to infer local surface geometry and estimate co-visible regions between UAV images and the reference map. Based on this prior, a Geometry-Saliency Coupled Co-visibility Score is introduced to jointly consider geometric co-visibility and detector saliency for keypoint ranking. In this way, DECO retains keypoints that are both visually distinctive and geometrically co-visible, improving feature matching and PnP-based pose estimation. Extensive experiments demonstrate that DECO achieves superior localization performance and can be integrated with different depth models, feature detectors, and matchers. The source code will be available at https://github.com/UAV-AVL/DECO.

0.38