CS Paper Radar

ORBIT++: Benchmarking SfM in the Wild with 360° Video

Sara Sabour, Linyi Jin, Richard Tucker, Amir Hertz, Marcus Brubaker, Saurabh Saxena, Junhwa Hur, Andrea Tagliasacchi, Deqing Sun, David J. Fleet, Richard Szeliski, Noah Snavely

cs.CV ·submitted 2026-08-22 16:54 UTC · v1
top venuebenchmark

Abstract

Structure-from-Motion (SfM) is a cornerstone of 3D perception, yet current methods often fail when applied to complex videos involving challenging camera motions or dynamic scenes. Compounding the problem, the field lacks reliable ground-truth benchmarks for such difficult scenarios, making it hard to gauge real-world progress or to pinpoint where improvements are most needed. To address this gap, we introduce a new benchmark for evaluating camera pose estimation. Our key insight is to leverage online panoramic 360° video as a source of data from which to construct challenging clips, while still enabling robust ground-truth trajectory recovery. The panoramic nature of these videos provides richer visual context for tracking camera motion, even when parts of the view are affected by blur, motion, or dynamic objects. After tracking camera motion across full 360° videos, we crop and reproject selected portions to generate perspective-view clips that serve as our benchmark, called ORBIT. Experiments show that COLMAP, as well as recent optimization-based and feed-forward SfM methods struggle to accurately estimate camera poses on our benchmark. Hence, ORBIT provides a valuable testbed where researchers can meaningfully measure progress on truly challenging, real-world SfM problems.

Comment
A revision was Accepted at CVPR 2026

Closest papers

Nearest neighbours by meaning across the whole index.

TAP-Out: Tracking Any Point in 360° via Outpainting

cs.CV ·2026-10-30 ·Finlay G. C. Hudson, James A. D. Gardner, William A. P. Smith
publishedbenchmarkcode/data similarity 0.72
Abstract · Accepted at BMVC 2026. 22 pages, including supplementary material. Project page: https://finlay-hudson.github.io/tapout/

Tracking points that leave the camera's field of view (FoV) requires reasoning about unobserved scene dynamics, a fundamentally different problem from tracking visible correspondences. We present TAP-Out, an offline method that makes this out-of-view (OOV) reasoning explicit by leveraging generative video outpainting as a world-model prior. Given a narrow-FoV input video, TAP-Out outpaints a complete 360° equirectangular video, locates target objects within the panoramic scene via video object segmentation, and synthesises object-centred perspective crops on which standard in-frame trackers operate. This decoupled design composes off-the-shelf foundation models without requiring task-specific architectural modifications. On the TAPVid360 benchmark, TAP-Out achieves state-of-the-art performance, improving OOV tracking accuracy by approximately 3x over the best prior method. We demonstrate its flexibility on out-of-frame object segmentation and detection and we provide detailed diagnostic analyses across motion regimes, static versus dynamic content, and hallucination quality, characterising when and why the approach succeeds or fails.

0.46

PIVOT: A Multi-Trajectory Dataset and Testbed for Pose, Intrinsics, and Novel Viewpoint Evaluation in Real-World 3D Reconstruction

cs.CV cs.AI ·2026-08-26 ·Mary Raymond
benchmark similarity 0.72
Abstract

Neural radiance fields (NeRFs), 3D Gaussian Splatting (3DGS), and related novel-view synthesis methods are commonly evaluated under capture and reconstruction conditions cleaner than those encountered by robots, drones, and autonomous systems. Benchmarks often rely on reconstruction-friendly trajectories, optimized camera poses and intrinsics, and held-out views sampled from trajectories represented during training. These assumptions can obscure performance with measured poses, reusable camera calibration, and structurally different camera paths. We introduce PIVOT (Pose, Intrinsics and Viewpoint Oriented Testbed), a multi-trajectory dataset, processing pipeline, and evaluation framework for independently studying these factors. PIVOT captures each scene using diverse camera trajectories and retains, where available, both sensor-derived measured poses and COLMAP-optimized poses, together with calibrated and optimized camera intrinsics. It defines three benchmark families: (1) seen versus unseen trajectory novel-view generalization, (2) measured versus optimized pose sensitivity, and (3) calibrated versus optimized intrinsics sensitivity. We also introduce a directed pose-space Chamfer distance to quantify how well training poses cover an evaluation trajectory. PIVOT v1 contains five real-world scenes captured with a DJI Mini 4 Pro and provides an open processing and Nerfstudio-based evaluation toolchain. Benchmark results show a consistent quality gap between held-out views on represented trajectories and unseen trajectories, as well as substantial sensitivity to pose source and camera intrinsics.

0.06

OmniCam: Omni-Camera Trajectory Generation via Geometry-Grounded Pose Token Learning

cs.CV cs.AI ·2026-10-07 ·Zhenyang Liu, Chenjie Cao, Yisu Zhang, Xuhui Zuo, Xiangyang Xue +3 more
similarity 0.72
Abstract

Camera trajectories control viewpoint changes in video generation, scene reconstruction, and robotic perception. Generating them from language requires both scene geometry and target-aware framing. We introduce OmniCam, an autoregressive model that generates camera pose sequences from a single panorama and textual trajectory descriptions. Its geometry-grounded pose token learning combines three components: a panoramic point-cloud encoder for omnidirectional geometric context; hybrid absolute-rotation and relative-translation tokenization with temporally consistent quaternion signs; and separate geometric and semantic conditioning streams with an explicit 3D target anchor. We also construct OmniCaT, containing 267,700 trajectories across four camera behaviors. On the reported OmniCaT evaluation, OmniCam reduces trajectory errors by 28--47% and collision rate by 65.8% relative to GenDoP retrained on OmniCaT. Against the best baseline for each metric, the ATE and collision reductions are 43.0% and 62.3%, respectively. Component ablations support the use of geometric and target-aware conditioning, while downstream experiments examine camera-controlled video generation and robotic active perception.

0.49

RIGOR: Rig-Informed Geometry for Omnidirectional Reconstruction

cs.CV ·2026-09-11 ·Tingjun Huang, Dmitry Rudshin, Mathieu Meyer, Pietro Bonazzi, Marc Pollefeys +1 more
code/data similarity 0.72
Abstract

Recent developments in feed-forward 3D reconstruction resulted in models which can recover dense scene representations and camera motion solely from an image stream. However, such predictions are prone to becoming inconsistent over long trajectories, specifically in demanding environments with repetitive structures, weak textures and dynamic objects or people. One way to mitigate those challenges is to use an omnidirectional camera, which provides wide spatial coverage and captures richer visual information. Yet, the majority of models do not offer support for 360-degree imagery or require additional fine-tuning. To bridge these two aspects, we present RIGOR: a large-scale reconstruction pipeline for gravity-aligned omnidirectional videos that retains a frozen feed-forward perspective backbone and exploits each panorama as a four-view virtual rig. The rig structure is used to detect and repair locally inconsistent predictions, to retrieve loop closures through cyclic four-view consensus, and to geometrically verify candidate revisits before global optimization. Verified constraints drive a Sim(3) pose graph that corrects accumulated rotation, translation, and scale drift along the sequence. We demonstrate that the proposed consistency mechanisms improve both trajectory accuracy and reconstructed geometry over a feed-forward baseline on challenging construction-site sequences. The code is made available under this link: https://github.com/TangentH/RIGOR.

0.48

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.72
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

MUGEN: Interactive Panoramic World Exploration via Camera Control

cs.CV ·2026-09-29 ·Jiaming Tan, Zhen Li, Shuwei Shi, Minggui Teng, Siqi Yang +4 more
top venuecode/data similarity 0.71
Abstract · Project page: https://alaya-lab.github.io/MUGEN

Interactive panoramic video generation aims to synthesize immersive 360\textdegree{} videos that remain visually coherent while following user-specified camera trajectories during exploration. However, progress is limited by a coupled data-and-model gap: existing panoramic video datasets are often short, weakly annotated, or lack camera trajectories, while existing camera-controlled video generation models are designed for perspective videos and do not directly support panoramic geometry. In this paper, we introduce MUGEN and Wan360 to address these limitations. MUGEN is a large-scale real-world panoramic video dataset tailored to interactive 360-degree world exploration, comprising over 1,300 hours of at least 4K panoramic videos with rich semantic and geometric annotations. Built on MUGEN, we further present Wan360, a camera-controllable interactive panoramic video generation model. Panoramic videos are commonly represented by EquiRectangular Projection (ERP), which unfolds a spherical 360-degree view into a rectangular frame with cyclic longitude seams and pole distortions. To this end, Wan360 introduces three parameter-free ERP-aware components: periodic longitude RoPE for seam-consistent positional encoding, ERP-aware padding for reducing boundary artifacts, and random roll yaw for consistent learning. For camera control, Wan360 uses a panoramic Plücker embedding that represents camera motion with ERP rays rather than perspective pinhole rays. Experiments show that MUGEN serves as a data foundation for panoramic world exploration, and that Wan360 enables high-quality, temporally coherent, camera-controllable 360-degree video generation.

0.45

HAT: Hypothesis-Anchored Tracking for Video Monocular Spacecraft Pose Estimation

cs.CV ·2026-09-18 ·André Lopo, Atabak Dehban, Rodrigo Ventura
similarity 0.71
Abstract · 8 pages, 3 figures, 4 tables

Monocular 6-DoF pose estimation of non-cooperative targets is important for on-orbit servicing and debris removal. A single-image estimator can confuse near-symmetric spacecraft orientations, and tracking can preserve an incorrect pose. We present Hypothesis-Anchored Tracking (HAT), a causal framework that uses inter-frame motion to select among competing CAD-based pose hypotheses before alignment and fusion. Rather than independently choosing the highest-scoring hypothesis in each image, HAT retains competing orientation histories and selects a pose to anchor the relative trajectory estimated by monocular SLAM. Sparse anchors and pose fusion provide per-frame estimates after initialization without revising past outputs. The method requires only a calibrated RGB sequence, a metric CAD model, and target image regions, which can be supplied by detection or segmentation. The pretrained pose and SLAM networks require no target-specific training or fine-tuning. We evaluate two versions, Mega-HAT and Pico-HAT, using MegaPose and PicoPose, on SPARK-2024, SwissCube and SHIRT, with YCB-Video assessing performance outside the space domain. Using one temporal configuration per method, the arithmetic means of the four dataset-wise comparisons show 9.4% lower mean pose error and 3.76 times the sustained input FPS for Mega-HAT relative to independent MegaPose, and 23.9% lower mean pose error and 2.42 times the FPS for Pico-HAT relative to independent PicoPose. Mega-HAT ablations on SPARK and an offline reference examine component contributions and the effect of revising past estimates.

0.50

MV2: Multi-View Multi-Vehicle Driving Dataset for Novel View Synthesis

cs.CV ·2026-08-12 ·Sanjay Bhargav Dharavath, Hanvitha Saraswathi Mukkamala, Faizan Farooq Khan, Ioannis Kakogeorgiou, Aditya Arun +2 more
top venuebenchmarkdatasetcode/data similarity 0.71
Abstract · 38 pages, 25 figures, ECCV 2026 accepted paper

Differentiable rendering has advanced novel view synthesis (NVS), yet applying it to real-world driving remains difficult due to sparse capture viewpoints, dynamic objects, and limited multi-trajectory data. We introduce the Multi-View Multi-Vehicle (MV2) dataset and benchmark for evaluating NVS models under large viewpoint changes in dynamic urban scenes. MV2 features synchronized captures from a car, scooter, and drone, each following distinct yet synchronized trajectories. Training NVS methods on one vehicle's camera stream and testing on another enables evaluation under substantially larger viewpoint variations than existing single-trajectory datasets. All sequences are registered via Structure-from-Motion and camera poses verified using manual pixel-level correspondence annotations, yielding 50 high-quality scenes with 12000 images. Benchmarking recent NVS and camera pose estimation methods shows that NVS performance degrades with increasing viewpoint disparity, and that feed-forward pose estimators notably lag behind optimization-based approaches, highlighting MV2 as a rigorous testbed for NVS in driving. The dataset, benchmark protocol, and project resources are available at https://mv2-dataset.github.io/.

0.53