CS Paper Radar

MotionDLO: Hybrid Event- and Frame-Based Tracking of Deformable Linear Objects

Annalena Hartmann, Priyamvada Ajithkumar, Patrick Bründl, Jörg Franke

cs.RO cs.CV ·submitted 2026-08-23 12:53 UTC · v1
code/data

Abstract

Reliably tracking moving deformable linear objects (DLOs) while simultaneously ensuring robustness, accuracy, and temporally consistent state estimation remains a fundamental challenge in robot perception. We introduce MotionDLO, a real-time tracking framework specifically designed to overcome these limitations in temporal continuity and latency. The method exploits the high temporal resolution and sparsity of event-based cameras and combines segmentation with the Coherent Point Drift (CPD) algorithm under the principles of Motion Coherence Theory. This integration enables temporally consistent shape estimation while maintaining a low computational overhead. Existing event-based tracking methods are typically computationally efficient but exhibit reduced accuracy compared to frame-based approaches, or alternatively compromise event sparsity to achieve competitive performance. To resolve this trade-off, we propose a hybrid event- and frame-based tracking architecture that preserves the complementary strengths of both sensing modalities. The event stream ensures high-frequency motion updates, while frame-based information stabilizes spatial accuracy and object identity. We demonstrate that the proposed framework reliably associates DLO instances across video sequences, enabling robust perception for robotic manipulation tasks. Experimental results validate real-time performance at 12 ms update rates and accurate shape tracking with an point-to-curve error as measurement of accuracy of up to 0.43 mm, supporting dynamic path adaptation during manipulation. The source code and demonstration datasets are publicly available.

Closest papers

Nearest neighbours by meaning across the whole index.

Selective Event Evidence and Persistent Temporal Priors for Event-Based Point Tracking

cs.CV ·2026-11-05 ·Xiaokai Song, Zhang Li, Leqi Liu, Yibin Ye, Kun Wang +1 more
code/data similarity 0.69
Abstract

Event cameras enable tracking under fast motion and challenging illumination. However, stable long-term point tracking remains challenging: event activity is sparse and varies with scene content and motion, complicating correspondence, while trajectory estimates can drift over long sequences. Together, these challenges motivate a tracker that selectively uses informative event evidence and retains trajectory constraints across temporal windows. We propose Selective Event Evidence and Persistent Temporal Priors (SEPT), an event-only framework for tracking any point (TAP) over long sequences. SEPT introduces two complementary modules: Task-Adaptive Event Evidence Modulation (TEEM) and Persistent Trajectory Prior (PTP). Using only tracking supervision, TEEM learns a bounded reliability field that weights the event tensor across space, time, and channels before feature extraction. PTP carries geometric information across overlapping windows by marginalizing a fixed local quadratic trajectory model with a Schur complement. Its visibility-aware correction refines overlap coordinates, while a clipped terminal velocity initializes coordinates at newly exposed timestamps. SEPT builds on the ETAP architecture. SEPT is trained exclusively on synthetic EventKubric data and evaluated on five datasets across TAP and feature tracking. Results show that SEPT outperforms the retrained ETAP baseline in average Jaccard for TAP and in feature age and expected feature age for feature tracking; it also surpasses several methods combining event and frame inputs on EC and EDS. The source code is publicly available at https://github.com/sssxxxkkkk/SEPT.

0.30

E-WAVE: Event-based Continuous Optical Flow via Warping-Aligned Visual Encoding

cs.CV ·2026-09-28 ·Jiale Wu, Xiaoyang Bai, Haoming Yu, Yiwei Chen, Yifan Peng +1 more
similarity 0.67
Abstract

Temporally dense optical flow is essential for dynamic perception in immersive VR/AR systems, where rapid head, hand, and object motion must be continuously captured and tracked. Existing frame-based optical flow estimation methods are constrained by the tradeoff between temporal resolution and computational cost; while event cameras, with their high temporal resolution and energy efficiency, serve as a natural solution to the dilemma. However, event-based approaches commonly rely on correlation volumes to capture pairwise voxel correspondences, which incur substantial memory and computation overhead. We present E-WAVE, a correlation-free framework for high-temporal-resolution (HTR) optical flow estimation from event streams. Instead of constructing all-pairs correlation volumes, E-WAVE employs global attention mechanism to model long-range feature dependencies and performs trajectory guided feature warping using Bézier curve. Through iterative updates, it predicts trajectories that allow for querying at arbitrary timestamps without repeated inference. Experiments on MultiFlow and DSEC-Flow demonstrate a 25% lower trajectory error and comparable endpoint flow estimation accuracy relative to state-of-the art baselines. Additional evaluations on self-captured data using a head-mounted prototype validate that E-WAVE remains robust under challenging real-world conditions.

0.21

RoPT: Robust 6DoF Object Pose Tracking in Video

cs.CV cs.RO ·2026-10-20 ·Yongqing Liang, Yuzhong Chen, Sihang Li, Junsuk Kim, Chase Kidder +5 more
similarity 0.67
Abstract

Accurate 6-DoF object pose tracking is essential for robotic interaction, yet conventional monocular pipelines frequently suffer from catastrophic divergence under rapid object motion. We present RoPT, a robust tracking framework engineered to overcome this limitation by unifying visual perception, temporal kinematics, and global re-localization into a tightly coupled closed loop. Unlike existing open-loop trackers, RoPT delivers three critical capabilities that fundamentally alter system resilience. First, the visual perception component tracks object masks to robustly handle partial and severe occlusions. Second, a kinematic factor graph regularizes frame-to-frame updates, forecasts forward pose predictions, and drives a parallel multi-hypothesis verification scheme to bypass local minima. Finally, an active re-localization module transforms the pipeline into a closed-loop system, making it failure-aware and capable of deterministic self-recovery. We demonstrate the effectiveness of our framework across challenging benchmarks alongside real-world robotic demonstrations, achieving significantly higher tracking survivability under rapid motion.

0.16

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.66
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

Event-Frame Fusion for Inter-Frame Segmentation via Event-Guided Motion

cs.CV ·2026-09-18 ·Dalia Hareb, Jean Martinet, Benoit Miramond, Elisabetta Chicca
published similarity 0.66
Abstract

Autonomous navigation requires precise and efficient semantic segmentation, yet existing frame-based approaches remain limited by motion blur, glare, latency, and the low temporal resolution (20-30 FPS) of conventional cameras, which leads to information loss between frames. Event cameras have emerged as an alternative sensing modality, capturing intensity changes asynchronously with high temporal resolution, high dynamic range, and sparse outputs. However, event-based algorithms still fall short of frame-based ones in accuracy, as most segmentation methods are designed for dense frame data. To overcome these limitations, we propose a hybrid vision architecture that combines conventional frame-based and event-based cameras. The system integrates two complementary components: (1) a compact Spiking Neural Network (SNN) with 42k parameters for motion estimation, and (2) a lightweight event-driven SNN with 0.84M parameters for frame-based semantic segmentation, which interpolates motion between frames to refine segmentation results. By predicting inter-frame segmentations, the framework achieves segmentation rates of up to 500 Hz with an energy consumption below 1.87 mJ per inference, while maintaining real-time GPU execution at frequencies up to 200 Hz. Additionally, our approach compensates for information loss in frames affected by blur or overexposure, enabling more robust perception in challenging conditions.

0.44

Static in Frames, Dynamic in Events: Rethinking Features in Event Cameras as Motion Cues

cs.CV ·2026-08-11 ·Hesam Araghi, Jan van Gemert, Nergis Tomen
benchmarkcode/data similarity 0.66
Abstract

Event cameras capture intensity changes asynchronously with high temporal resolution, requiring novel preprocessing methods for downstream tasks. Unlike static intensity snapshots, event data inherently encode information about scene dynamics and object motion, meaning that features derived from events can exhibit behaviors with no direct analogue in frame-based vision. In this paper, we analyze two features used in event-based corner detection---the eigenvalues of the structure tensor and the spatiotemporal density values---and show that they are \emph{motion cues}. We hypothesize that these features, combined with local geometric information, can enhance motion estimation tasks. To validate this, we first theoretically analyze how the eigenvalues of the structure tensor at moving corner points relate to the direction of motion. We then design controlled experiments on a synthetic dataset, confirming that extending local geometric features with eigenvalues and density values provides complementary motion information and is robust to texture and shot noise. Finally, we integrate the proposed features into a state-of-the-art event-based optical flow network and evaluate on the real-world DSEC benchmark, where the added features consistently improve accuracy, with the largest gains in data-scarce scenarios and for lower-capacity models. The code for this paper can be found at: \href{https://github.com/hesamaraghi/static-in-frames-dynamic-in-events}{https://github.com/hesamaraghi/static-in-frames-dynamic-in-events}.

0.24

Tight Learned Event-Inertial Odometry (TLEIO): a Transformer-Based Architecture for End-to-End Motion from Event Streams

cs.CV ·2026-10-23 ·Matteo Cascone, David Jensen, Alessandro Pirini, Angelo Stefanini, Pietro Venè +2 more
benchmark similarity 0.66
Abstract · 14 pages

Event cameras provide microsecond temporal resolution, high dynamic range, and sparse asynchronous measurements, making them compelling for odometry under fast motion and challenging illumination. Yet, accurate event-based state estimation remains difficult: existing systems often use events as a complement to frames or rely on feature tracking, correspondence search, and optimization-heavy backends, limiting the efficiency promised by event sensing. We introduce Tight Learned Event-Inertial Odometry (TLEIO), a compact filter-based pipeline that learns short-window relative motion directly from voxelized event streams and tightly fuses the resulting constraints with IMU propagation. Its learned front-end, EventsFormer, predicts local displacements and per-axis uncertainty from event voxels in a single forward pass, while a stochastic-cloning EKF fuses these overlapping predictions with IMU propagation, producing metric trajectories without explicit feature tracks and pose optimization at inference time. The network is trained directly from pose displacements, without requiring event-flow labels. We evaluate TLEIO on the TartanAir/TartanEvent benchmark and on real DAVIS240c sequences. On TartanAir, TLEIO reduces average ATE from 2.26 m to 1.10 m over the IMU-only TLIO baseline, while achieving up to 48.9% lower runtime than optimization-based event odometry methods.

0.11

MvT: Event-based Multi-view Projection for Multiple Object Tracking

cs.CV ·2026-10-27 ·Muxi Zha, Banglei Guan, Minzu Liang, Zibin Liu, Yang Shang +2 more
publishedcode/data similarity 0.65
Abstract · 16 pages, 20 figures, published to IEEE T-IP

Event cameras are increasingly used for Multiple Object Tracking (MOT), but their asynchronous event output often requires specialized methods. Existing processing methods primarily follow two paradigms, pseudo-frames and event-by-event. The former is the prevailing approach since its data format aligns with images, making image-based techniques applicable. However, it suffers from tracking failures when trajectories overlap or are spatially close on pseudo-frames. Facing this challenge, we propose a multi-view pipeline, Multi-view Tracking (MvT), which preserves the 2D data format to leverage image-based techniques directly while introducing additional spatio-temporal views to resolve tracking ambiguities in a single view. MvT comprises a Multi-view Projection (MvP) module and a Multi-view Fusion (MvF) stage. MvP encodes events into three complementary spatio-temporal views while mitigating the pattern discretization. Within MvF, multi-view results are unified into a 3D coordinate system, and tracklets are associated through an optimization model subject to specific criteria combination. Evaluations on four datasets, including our self-collected Small Objects Dataset (SOD), show that MvT seamlessly integrates image-based methods and outperforms existing non-learning and learning trackers in generalized scenarios, and effectively resolves the single-view tracking ambiguities. Being training-free, MvT is applicable when ground-truth annotation is infeasible, thereby highlighting its practical, data-efficient potential. Code is available at https://github.com/zhazhabiu/MvTracking.

0.47