CS Paper Radar

Deep Learning-Based Multi-User Communication Design for Dense IoT Networks: Interference-Aware Finite-Blocklength Communication and Preliminary MIMO Extensions

Arkadeep Sinha, Shubham Paul, R. Manivasakan

cs.IT cs.AI ·submitted 2026-08-24 07:58 UTC · v2
published

Abstract

Dense IoT networks require reliable communication despite limited spectrum and substantial multi-user interference while maintaining manageable receiver complexity. This work introduces a deep-learning-based end-to-end multi-user communication design for interference-limited finite-blocklength IoT scenarios, focusing on short and medium blocklengths. We extend a prior 2-user SiameseNet transceiver framework to accommodate 2, 4, and 8 users, leveraging learned redundancy for interference suppression and noise robustness. Compared to conventional non-orthogonal access baselines, our method demonstrates strong Block Error Rate (BLER) performance across various scenarios without resorting to joint detection; the per-user decoder scales roughly linearly with the number of users. Further, we examine the robustness under interference mismatch and unequal interference strengths, critical for practical deployments with heterogeneous devices. The Latent-space analysis reveals that the learned codeword distance increases as the effective per-user rate decreases, corroborating with the observed BLER improvements. In addition, we also present preliminary results for a 2X2 MIMO setup under fixed-channel CSIT and CSIR, indicating potential for extending the framework to IoT gateways with multiple antennas.

Comment
Accepted for publication at IEEE ICSCST 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Selective Interference Suppression of Siamese-Net in Heterogeneous Interference Channels

cs.IT ·2026-08-27 ·Arkadeep Sinha, Shubham Paul, R. Manivasakan, Nambi Seshadri, R. David Koilpillai
similarity 0.64
Abstract · Results in paper maybe erroneous. Needs further validation

We study an end-to-end learnt short-block codes for a $N$-user real Gaussian interference channel with heterogeneous pairwise interference strengths, while keeping single-user decoding at every receiver. In this paper, we study the case wherein only a few dominant interferers exist and investigate whether Siamese-style coupled training can adapt selectively to encode (\& decode) to ensure optimal performance corresponding to best tradeoff between orthogonality and coding gain or it enforces unnecessary global orthogonality oblivious of the reality. Our work focuses on a 4-user unequal-interference configuration with one dominant pair $(1,2)$ (of strength $Λ$) and a weak pair (with weak background coupling ($λ$)), through which we demonstrate a selective interference suppression phenomenon where the learned codebooks become near-orthogonal primarily for the dominant pair, while weakly coupled pairs retain alignment needed for coding gain. We quantify this behaviour using latent-space cross-user similarity statistics (worst-case coherence measure, average similarity measure, etc) and connect these geometric signatures to the observed BLER robustness under unequal interference. It seems that the SiameseNet selectively suppresses the interferences from various interferring user pairs to yield optimal tradeoff between coding gain and BLER dictated by orthogonality.

0.21

Adaptive Unequal Error Protection for Semantic Split Learning over Wireless Channels

cs.IT eess.SP ·2026-08-17 ·Vukan Ninkovic, Dejan Vukobratovic, Dragisa Miskovic, Chao Wang
published similarity 0.61
Abstract · Accepted for publication at IEEE Communications Letters

We propose a task-aware semantic split learning (SL) framework for wireless edge-cloud inference, in which the reliability of transmitted latent representations is dynamically adapted to their relevance for the downstream task. An autoencoder (AE)-based physical (PHY) layer enables end-to-end learning of the communication interface, while unequal error protection (UEP) is realized via mutual information (MI)-driven prioritization of latent components during training. The gradient of the estimated MI with respect to each latent component serves as a sensitivity-based proxy for task relevance, providing a fully learning-driven prioritization that adapts to both the data distribution and the downstream task. We further show that this prioritization translates into measurable physical-layer effects: MI-guided UEP assigns significantly higher transmit power to the most task-critical latent components compared to the equal error protection (EEP) baseline. Experiments on real-world IoT sensing data demonstrate consistent gains over equal and fixed-UEP baselines across SNR regimes. Additional analysis confirms ranking stability, estimator robustness and generalization across datasets and task types, indicating broad applicability of the proposed framework.

0.31

Density-First Design of Anti-Jamming Sparse Spreading Codes for NB-IoT

eess.SP ·2026-11-15 ·Michel Kulhandjian, Hovannes K. Kulhandjian, Daniel J. Jakubisin, Theodoros A. Tsiftsis, Alexandros-Apostolos A. Boulogeorgos
published similarity 0.60
Abstract · 14 pages, 6 figures, 4 tables. Extended version of a paper to appear in Proc. IEEE Military Communications Conference (MILCOM), Washington, …

As narrowband Internet of Things (NB-IoT) systems continue to be deployed in increasingly heterogeneous and demanding wireless environments, including those characterized by interference, high mobility, and potentially hostile conditions, enhancing the resilience of the physical-layer waveform has become an important and timely design consideration. Motivated by this need, the present paper introduces a density-first framework for the design of anti-jamming sparse spreading codes in NB-IoT systems. Building on this framework, we propose a generalized method for constructing sparse codes that decouples column density from the conventional Alamouti-paired structure, thereby enabling both disjoint-support and deterministic code designs. In addition, we develop a generative machine-learning approach based on a variational autoencoder for synthesizing jamming-robust sparse spreading codes. To evaluate the performance of sparse spreading under conditions of additive white Gaussian noise, fading, and pulse jamming, we present a bit-error-rate (BER) analysis framework. Extensive Monte Carlo simulations, conducted across a wide range of density, channel, and jamming conditions, show that the performance of sparse spreading codes is determined primarily by column density rather than by optimization of code coefficients. In particular, highly sparse codes with disjoint support offer the greatest robustness to jamming while avoiding the unfavorable intermediate-density regime. Relative to the prior-art Alamouti-paired low-density spreading code, the recommended uniform-density design reduces pulse-jamming BER by roughly 5 times; a deterministic Lempel-Costas construction attains the empirical optimum in closed form, while the variational-autoencoder generator yields a further 45% improvement over the best algebraic design.

0.37

DRL-Based AoI Minimization for RSMA in Finite-Blocklength MU-MISO

cs.IT ·2026-10-08 ·Enes Kaya, Mehmet Alp Demircioğlu, Elif Tugce Ceran, Melda Yuksel
publishedbenchmark similarity 0.59
Abstract

This letter investigates age-of-information (AoI) minimization in multi-user wireless networks operating in the finite-blocklength (FBL) regime, which is critical for low-latency transmission of short state-update packets. While rate-splitting multiple access (RSMA) provides a powerful and flexible framework for interference management in multi-user FBL systems, the joint optimization of its parameters, such as precoding vectors, power allocation, and rate-splitting ratios, to guarantee information freshness results in analytically intractable complexity. To address this challenge, we propose an actor--critic deep reinforcement learning (DRL) framework to learn dynamic resource-allocation policies in multi-user multiple-input single-output (MU-MISO) broadcast channels. Simulation results show that the proposed RSMA-RL framework achieves consistently lower AoI than the state-of-the-art benchmarks, with substantial gains observed at low signal-to-noise ratio (SNR) and short blocklengths, while matching benchmark performance at high SNR with significantly lower online complexity via a single neural-network forward pass at execution.

0.41

Practical Deep Learning-Based Block Demapping for mmWave MIMO Systems

cs.AR ·2026-11-08 ·Syed Asrar ul haq, Jesus O. Lacruz, Joerg Widmer, Sumit J. Darak
published similarity 0.57
Abstract · Submitted for publication to IEEE Transactions on Wireless Communications

Deep learning is expected to play a central role in 6G systems, by enabling data-driven physical layer designs that can adapt to practical wireless impairments. This is particularly important for millimetre-wave (mmWave) multiple-input multiple-output (MIMO) systems, which are strongly affected by residual channel distortions, interference, and hardware non-idealities that are difficult to capture with analytical models. In this paper, we propose a deep learning-based soft demapper that performs block-wise processing of received symbols instead of conventional symbol-wise detection. The demapper employs a one-dimensional convolutional neural network to learn temporal structure induced by practical propagation and hardware effects, while producing soft bit outputs compatible with soft-decision decoding stages. The proposed approach is trained and evaluated for a 4$\times$4 wideband mmWave MIMO system at 60~GHz, using an over-the-air dataset collected across multiple days and settings. Experimental results demonstrate consistent improvements over a conventional soft-decision demapper, including up to a 2.6$\times$ reduction in bit error rate for 16QAM and up to a 17.6$\times$ reduction for 64QAM under real over-the-air mmWave MIMO conditions. The proposed demapper is further implemented on a Zynq RFSoC platform using a reconfigurable convolution engine and fixed-point arithmetic, achieving an approximately 34.3$\times$ speedup compared to a processor-based implementation, and demonstrating that learning-based demapping can be deployed efficiently on resource-constrained edge hardware.

0.32

Robust Resource Allocation for STAR-RIS-Assisted ISAC Networks Using Deep Learning

cs.PF ·2026-10-19 ·Yuwen Cao, Jiajun Wu, Howard H. Yang, Tomoaki Ohtsuki, Tony Q. S. Quek
theory similarity 0.56
Abstract

In this paper, we focus on investigating the resource allocation in an integrated sensing and communication (ISAC) system assisted by a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS). Due to the coupled non-convex nature of the optimization problem, solving the above joint resource optimization problem while guaranteeing superior sensing performance is challenging, especially in dynamic environment. To conquer such challenge, prior iterative optimization algorithms have been presented. However, practical implementations of these prior algorithms face notable computational challenges, e.g., the reliance on accurate global channel information and the assumption of ideal phase shifts. In this context, we propose a model-driven deep learning framework for jointly optimizing the transmit beamforming and waveform in ISAC networks with low-overhead. In addition, we adopt the Cramer-Rao lower bound (CRLB) as the sensing performance metric, and the multi-user interference (MUI) energy as the communication performance metric for performance evaluation. Besides, our framework jointly optimizes the transmit beamforming, waveform and the STAR-RIS reflection/transmission coefficient matrices by minimizing the weighted sum of MUI energy and CRLB. Our study also considers the impact of imperfect channel information, making the research scenario more aligned with real-world applications. Simulation results validate that the proposed framework not only achieves higher sum-rate performance comparable to traditional iterative algorithms but also significantly reduces computational complexity in terms of algorithm execution time, as well as exhibits inherent robustness.

0.11

Semantic Communications: Principles, Architectures and Applications

cs.NI ·2026-10-20 ·Sasa Maric
similarity 0.55
Abstract · 9 pages 3 figures

Conventional communication systems are designed to transmit data reliably, focusing on metrics such as bit error rate, throughput, and channel capacity. However, these traditional measures do not evaluate whether the received information is actually useful for a specific downstream task. To address this limitation, semantic communication has emerged as a promising paradigm that prioritizes the meaning, context, and task relevance of transmitted information rather than raw bit level reconstruction. This paper presents a comprehensive review of the theoretical foundations, system architectures, learning techniques, and evaluation practices in semantic communications. We classify existing state-of-the-art algorithms ranging from deep joint source-channel coding (Deep JSCC) and task-oriented feature transmission to generative diffusion models and contrast their operational trade offs against conventional baselines. Furthermore, we examine key application domains, including remote sensing, autonomous vehicles, and healthcare IoT, while addressing open challenges in security, privacy, robustness, and standardized evaluation.

0.29

Uncertainty-Aware Federated Learning for Joint Communication and Computation in XR Systems

cs.IT cs.LG ·2026-10-15 ·Robert-Jeron Reifert, Hayssam Dahrouj, Alaa Alameer Ahmad, Haris Gacanin, Aydin Sezgin
top venue similarity 0.55
Abstract · 18 pages, 16 figures, 3 tables. This paper has been accepted for publication in IEEE Transactions on Mobile Computing

The convergence of communication and computation, empowered by artificial intelligence (AI) enhanced capabilities, emerges as a key enabler for realizing the promising functionalities of the sixth-generation of communication systems (6G). To this end, this paper investigates an AI-native, robust network, where multiple base stations (BSs) simultaneously serve several extended reality (XR) devices. The paper then presents an innovative distributed deep learning-based approach to simultaneously manage the transmit and computing powers, and computation allocation, amidst uncertainties in both channel and computing states information. Under such an interference network scenario, the paper proposes a robust approach for minimizing the worst-case delay across the served XR devices, subject to computation and power constraints. The paper leverages a deep neural network (DNN) that can be trained either centrally or in a federated manner to map estimated channels and computation requirements to optimized resource allocations per BS. During training, uncertainty samples, reflecting both channel and computing estimation errors, are injected after the DNN output to account for such joint uncertainties. Our results validate the enhanced robust delay performance and scalability of joint uncertainty injection as compared to uncertainty-agnostic methods and state-of-the-art benchmarks, with federated learning-based solutions achieving near-centralized performance while enhancing efficiency, privacy, and adaptability.

0.39