CS Paper Radar

A Multi-Viewpoint Modeling Framework for Digital Twin Integration and Reuse with LLM-Assisted Compatibility Analysis

Nafiseh Soveizi, Milan Kopp, Parinaz Rashidi, Qing Shan, Geerten M. Hengeveld, Ioannis N. Athanasiadis, Zhiming Zhao

cs.SE ·submitted 2026-08-24 11:25 UTC · v1

Abstract

Digital Twin (DT) ecosystems integrate heterogeneous computational models to represent complex systems under evolving, purpose-specific objectives. Systematic reuse of existing high-quality models and datasets is essential for scalable DT development, yet is constrained by heterogeneity in semantic intent, data structures, behavioral interfaces, and execution environments. As a result, integration becomes a cross-model, cross-view consistency problem that is hard to predict, quantify, and compare across design choices. Existing standards and integration platforms address these concerns separately, offering limited support for structured, purpose-aware compatibility assessment and early feasibility analysis when models are reused under new DT objectives. This paper introduces a multi-viewpoint integration modeling framework grounded in the Reference Model of Open Distributed Processing (RM-ODP). The framework structures integration-relevant knowledge across domain, information, computational, engineering, and technology viewpoints, representing cross-view dependencies as explicit, machine-actionable metadata. It comprises (i) a viewpoint-structured Model Metamodel for systematic model description and discovery, and (ii) a pattern-aware Mismatch Detector that operationalizes cross-view compatibility constraints via integration patterns, combining deterministic rule generation with Large Language Model (LLM)-assisted reasoning. This enables systematic identification of semantic, informational, and runtime inconsistencies and supports reasoning about integration feasibility and effort before implementation. Expert validation and an environmental modeling case study show that the approach enables structured compatibility reasoning, improves transparency of integration assumptions, strengthens cross-view interoperability, and supports scalable reuse in heterogeneous DT ecosystems.

Comment
45 page, 14 figs, 6 tables, 2 Appendix, Submitted to the International Journal on Software and Systems Modeling (SoSyM)

Closest papers

Nearest neighbours by meaning across the whole index.

DTScribe: Generating Models for Digital Twin Reporting using Local Large Language Models

cs.SE cs.AI ·2026-10-13 ·Kérian Fiter, Angelica Portocarrero, Bentley Oakes
similarity 0.64
Abstract

The development of a digital twin brings together many stakeholders and technical components. We have previously investigated the reporting of the conceptual architecture for these digital twins as an artifact for discussion. However, we find that the activity of modeling the digital twin for visualization and consensus-building can be quite tedious and time-consuming. In this article, we explore the automation of model generation using large language models, targeting the model required for digital twin reporting. Our approach is designed to ingest digital twin documents and output both the conceptual architecture visualization and a reporting page for that digital twin. We first extract from the input the key details aligning with our twenty-one-characteristic Digital Twin Description Framework described in previous work. Then, we generate a description model in the Ontological Modeling Language, representing the digital twin as a constellation of models, data, enablers, and services. We utilize refinement loops with large language models acting as judges and ontological reasoning to increase artifact quality as measured by our metrics. We investigate how architectural and parameter choices affect artifact quality, such as how refinement loops enable local large language models to produce sufficiently high-quality results comparable to larger models. We also detail insights and lessons learned useful for practitioners, such that they can integrate our techniques to accelerate their digital twin reporting or for other model generation tasks. These insights include the use of medium-sized local models (around 20 billion parameters), the avoidance of large language models as judges and clustering for characteristic extraction, and the recommendation of at least two reasoner loops for Ontological Modeling Language refinement.

0.20

A Model-Centric DevOps Architecture for DEVS-Based Digital Twin Simulation Services

cs.SE cs.CEcs.DC ·2026-09-10 ·Arnis Lektauers, Gusts Linkevičs, Guntis Mosāns, Arina Fokina, Rasa Gulbe
similarity 0.61
Abstract · v2: revised version. Corrects the case study of v1 (bus route 22 only; the v1 scenario had also included the trolleybus route of the same nu…

Digital twin simulation models evolve and are redeployed like software. Engines based on the Discrete Event System Specification (DEVS) have a sound formal basis but offer little support for versioning, automated validation, or continuous delivery in cloud-native environments. This paper proposes a model-centric DevOps architecture that deploys DEVS-based digital twin simulations as managed services. Models are first-class DevOps artefacts written in a declarative language based on YAML (YAML Ain't Markup Language) with a tuple-level mapping to the multiPDEVS formalism. Repository continuous integration (CI) validates publishing manifests, the engine loader performs syntactic, structural, and static semantic checks before every simulation, and published model artefacts are versioned and immutable, so that an earlier validated version can be selected by pinning its identifier. The platform runs as containerised microservices on Kubernetes with engine adaptations that externalise inputs and results and expose lifecycle control. An initial case study on bus route 22 in Riga exercises the lifecycle on an offline model with roughly 115,000 DEVS atomic components and reports single-container throughput and concurrent job execution on one Kubernetes node. Behavioural validation and multi-node evaluation remain future work.

0.22

LLM-Driven, Datasheet-Aware Automated Hardware Compatibility Verification for Early-Stage, Pre-Schematic Embedded System Design

cs.AI eess.SY ·2026-08-25 ·Haotian Qiao, Robert P. Dick
similarity 0.61
Abstract

We present an LLM-driven, datasheet-aware framework for early-stage hardware compatibility verification that identifies documentation-level interface incompatibilities based on hardware datasheets and high-level component connectivity descriptions. It does not require, and can therefore be used, before detailed schematic simulation and implementation. We view trustworthy LLM-assisted design automation not as directly generating answers from documents, but as transforming engineering information through traceable verification stages. Given hardware datasheets and high-level component connectivity descriptions, the framework constructs a design graph that captures device connectivity and shared interaction domains, retrieves only the engineering properties required by explicit, domain-oriented verification criteria , and generates deterministic scripts for compatibility evaluation. By decomposing compatibility analysis into modular stages and preserving intermediate results, the framework reduces context overhead, improves transparency and tractability, enables scaling, and avoids reliance on LLMs for numerical computation. Evaluated on seven embedded-system designs comprising 34 datasheets, our framework achieves 97.5% compatibility-verification accuracy and an 8.6 times reduction in input context size compared with ``upload-and-query'' workflows. These results demonstrate the feasibility of LLM-assisted, specification-based hardware compatibility verification at an early design stage, as well as the need for, and substantial benefits of, modular task decomposition, formalized verification criteria, and task-aware compact context construction.

0.40

Semantic Interoperability in Federated Digital Twin Systems: A Systematic Review Through the Levels of Conceptual Interoperability Model

cs.SE cs.AIeess.SY ·2026-11-01 ·Manonmani Sekar, Nasim Nezamoddini
survey similarity 0.60
Abstract

When two companies connect their digital twins, software models of their plants kept up to date with live data, each twin must translate the other's data into its own terms, and that translation rule, called a mapping, can stop being correct when one company changes the meaning of its data without telling the other. This PRISMA 2020 systematic review screened 5,833 records and read 119 full texts to determine whether any published system detects such a broken mapping and repairs it while the twins operate. In all 32 included studies the mapping is fixed before operation, and the two ingredients of run-time repair appear only separately: cross-company matching without any check that the match still holds, and detection and repair of changed meaning within a single company. The review turns this gap into six requirements, each illustrated on one running example, that a system claiming run-time semantic interoperability between independently owned twins should meet.

0.24

Constraint-Driven Modeling Enabling Dual Model Checking and Simulation for Discrete Event Systems

cs.SE cs.ARcs.LO ·2026-08-22 ·Soroosh Gholami, Hessam S. Sarjoughian
similarity 0.60
Abstract · 33 pages, 19 figures, 6 tables, 2 listings

Verification and validation (V&V) are crucial methods for evaluating the requirements and specifications of dynamical models that fulfill their intended purposes. Parallel Discrete EVent System Specification (PDEVS) is a system-theoretic modeling approach for creating modular, hierarchical component-based simulation models. In this paper, we introduce Constraint-DEVS, a method for creating bounded Parallel DEVS models that lend themselves, in addition to simulation, to model checking. We extend the DEVS-Suite framework to create Constraint-DEVS specifications which can then be model checked using a proposed state exploration protocol with the Parallel DEVS abstract simulator protocol. These capabilities, along with the support for non-determinism, complex data transfer, and performance-related property checking, make Constraint-DEVS and its accompanying DEVS-Suite a unique framework for the development, verification, and validation of discrete-event systems. In order to demonstrate this work, we developed and verified models of Network-on-Chip. Also, we detail behavioral design artifacts for the DEVS-Suite framework's hybrid model-checking and simulation engine.

0.15

An AI-Assisted Migration Framework for Transforming Legacy Scientific Applications into Reusable Cloud-Based Workflows

cs.SE ·2026-08-24 ·Nafiseh Soveizi, Sven Tesselaar, Hero Robinson Brouwer, Zhiming Zhao
published similarity 0.59
Abstract · 8 pages, 2 figures, 5 tables. Accepted at the 22nd IEEE International Conference on e-Science (eScience 2026)

Legacy scientific applications remain valuable research assets but are often tightly coupled to project-specific execution environments, limiting their reuse, reproducibility, and deployment within modern scientific workflow systems and cloud-native Virtual Research Environments (VREs). Existing migration approaches primarily target individual artifacts, such as notebooks or containers, and provide limited support for systematically transforming heterogeneous legacy applications into reusable cloud-native workflows. This paper presents an AI-assisted migration framework that combines the Reference Model of Open Distributed Processing (RM-ODP)-guided architectural analysis, Large Language Models (LLMs), and Design Structure Matrix (DSM) analysis. The framework first uses RM-ODP to guide an LLM in identifying reusable workflow components, their interfaces, and execution dependencies from heterogeneous legacy applications. The resulting workflow structure is then iteratively evaluated and refined using DSM analysis. Finally, an LLM-based workflow generator implements the validated workflow components and produces containerized execution environments and executable workflow definitions for deployment in cloud-native workflow systems, including VREs. The framework was evaluated on two legacy scientific applications from different scientific domains. In both cases, the applications were successfully transformed into reusable cloud-native workflows while preserving their original functionality, demonstrating the feasibility of the proposed approach for modernizing legacy scientific software.

0.26

Building real-time digital twin instances with Function+Data Flow: user evaluation and extension for iterative pipelines

cs.SE cs.CL ·2026-08-19 ·Eduardo de Conto, Blaise Genest, Arvind Easwaran, Nicholas Ng, Shweta Menon
published similarity 0.59
Abstract · 36 pages, 18 figures, submitted to SoSyM journal

Digital twins (DTs) increasingly leverage artificial intelligence (AI) and machine learning (ML) pipelines, both to build real-time DTs from high-fidelity simulations and to instantiate them with historical data. However, engineering these pipelines remains largely ad-hoc: pipelines are hard to specify, validate, and reuse, with scarce dedicated tooling. Function+Data Flow (FDF) addresses this by defining a visual domain-specific language (DSL) that represents functions (ML models) explicitly, enabling their composition and reuse. We implemented FDF in DesCartes Builder, an integrated modeling environment supporting FDF-based DT synthesis and validation. In this paper, we report on an empirical user study evaluating whether FDF and DesCartes Builder can make AI-based DT development more accessible and reliable. Participants implemented a representative real-time DT prototype within DesCartes Builder, and we measured perceived usability and feature adequacy through quantitative and qualitative measures. Our results indicate that DesCartes Builder and FDF achieve a good level of usability across a broad range of potential users, and particularly for the intended audience of domain experts. The study additionally surfaces concrete strengths and areas for improvement of both the tool and the underlying FDF framework. Informed by these findings, we propose H-FDF, a Hierarchical extension of FDF supporting iterative and modular pipelines, enabling the formal specification of more complex DT pipelines such as dual training. Our findings suggest that integrated, model-driven platforms are a promising direction to transform AI-based DT engineering into a disciplined modeling practice.

0.32

A System-of-Systems Case Study for the Verification of Composed Digital Twins

cs.SE ·2026-08-28 ·Mennatullah T. Khedr, Mengwei Xu, John S. Fitzgerald, Peter Gorm Larsen
similarity 0.58
Abstract · The 24th Overture Workshop, 18th May 2026

Current approaches to engineering dependable Digital Twins (DTs) of Cyber-Physical Systems lack practical guidance on how qualities such as relevance, verifiability, substitutability and fidelity may be formalised and verified. This need is amplified in Systems-of-Systems (SoS), where reliance is placed on the composition of DTs. The goal of this study is to identify foundational challenges that a framework for DT validation and verification should address in an SoS setting, and to investigate the formalisation of individual DT artefacts as a step towards compositional reasoning. We present a case study based on a DT-enabled greenhouse SoS modelled in VDM-RT (Vienna Development Method, Real-Time), including executable formal models, a property-based account of DT qualities, and an analysis of the obstacles arising when attempting to compose these artefacts at the SoS level. We consider how DT qualities may be operationalised as sets of verifiable properties. Formal modelling and analysis techniques and tools supporting their verification are identified. The study reveals how interpretations of DT qualities must adapt to different architectural roles and how local quality guarantees form assumptions for compositional reasoning. Full formalisation and verification of SoS composition is identified as future work.

0.19