CS Paper Radar

What Remains Normal? Clean Images Miss Useful Near-Defect Normal Patches for Anomaly Detection

Joongwon Chae, Runming Wang, Peiwu Qin

cs.CV ·submitted 2026-08-24 14:22 UTC · v2
code/data

Abstract

Normal-only industrial anomaly detectors use patches from clean training images as normal references or reconstruction targets. This assumes that clean patches are sufficient for the normal regions encountered at test time. We test that assumption directly. On MVTec AD, admitting ground-truth-normal patches from real defect images to a DINOv2 memory candidate pool raises pixel average precision (P-AP) from 73.34 to 76.95 while keeping the encoder, test-time score, and number of stored references fixed. Patches within two patch cells of the annotated defect recover 94.70% of this gain. We then ask whether useful patches of this kind can be exposed using clean training images alone. BoundarySupport inserts a procedural synthetic defect to alter surrounding context, excludes every token intersecting the nominal insertion or a detected RGB change, and learns only from pixel-preserved neighboring patches. Across three paired seeds, the same principle improves P-AP in all six memory and reconstruction settings across MVTec, VisA, and Real-IAD. Matched controls identify the altered-context feature itself as the useful normal evidence: with synthetic input or selected positions fixed, altered-context features outperform their clean-view counterparts as both reconstruction targets and memory references. On MVTec memory, the final score change is also spatially selective, with larger reductions on normal patches next to defects than on mid-distance or far-normal patches in all 15 categories. Code is publicly available at https://github.com/jw-chae/boundary_support.

Closest papers

Nearest neighbours by meaning across the whole index.

When More References Hurt: Contamination-Aware DINOv2 Memory Banks for Few-Shot Steel Defect Detection

cs.CV cs.LG ·2026-08-22 ·Hannaneh Kalantary, Javad Khoramdel
similarity 0.78
Abstract

Patch-memory anomaly detectors assume that their reference bank is normal, an assumption that is difficult to guarantee when additional industrial images are unverified. We study whether a few trusted normal images can safely recover useful normal patches from such references without defect masks. Starting from the DINOv2 patch-memory formulation used by AnomalyDINO, we score candidate patches by distance to a clean seed bank, discard the most suspicious 20%, merge the retained patches with the seed, and enforce a fixed budget by greedy coreset selection. On Severstal, naive additional references contain 9.46% anomalous patches; the proposed trim rejects 78.1\% of them and reduces residual contamination to 2.59%. At an equal 51,200-patch development budget, the proposed bank reaches 0.1084 AUPRC versus 0.0950 for naive expansion, 0.0952 for random removal, and 0.1030 for eight clean images. Injecting only 0.5\% anomalous patches into a clean bank reduces AUPRC from 0.1030 to 0.0759. On all five completed held-out pairs, the proposed bank improves over naive expansion, with a mean gain of 0.0142 AUPRC. Reference purity is therefore a first-order design variable, and unverified images are useful only when their contribution is filtered explicitly.

0.23

What Memory Composition Does Not Tell Us About Anomaly Detection

cs.CV ·2026-08-24 ·Joongwon Chae, Runming Wang, Peiwu Qin
similarity 0.75
Abstract

Memory-based anomaly detectors store nominal training patches and score test patches against this memory. A patch selected for coverage therefore becomes a nor- mal reference without a separate check that geometric rarity makes it safe to trust. We probe this coupling with sparse training contamination. Under fixed representa- tions and memory budgets, we compare random, medoid, local, and global coverage selectors. We then use CLEANCON, an out-of-bag cross-image support gate that changes candidate-image eligibility while fixing the representation, absolute mem- ory size, builder, and inference rule. Global coverage strongly over-represents sparse contamination. CLEANCON reduces final-memory contamination to approx- imately zero and increases category-macro P-AP in all 12 matched comparisons. Yet along a retention sweep, the lowest-contamination memory does not attain the highest P-AP; performance continues to improve while contamination rises. Mem- ory contamination therefore does not order the resulting memories by P-AP

0.16

ShiftSplit-AD: Separating Domain Shift from Defects in Foundation-Feature Visual Anomaly Detection

cs.CV ·2026-08-27 ·Muhamathu Ameer Ali Aacaas Muhamath
similarity 0.69
Abstract · 7 pages, 5 figures. Independent research manuscript

Visual anomaly detectors based on frozen foundation-model features commonly score distances from test patches to a memory of normal features. Benign acquisition changes can also enlarge these distances, confounding domain variation with defects. We investigate whether structured decomposition of nearest-normal DINOv2 residuals can suppress shift-induced evidence while retaining unseen defects. ShiftSplit-AD decomposes the patch residual matrix into low-rank and row-sparse components and scores the sparse component, with an optional low-rank/sparse fusion. The experiments expose a central trade-off rather than a universal separation: genuine defects can contain correlated, low-dimensional structure, so filtering broad residual activity may also remove defect information. On AeBAD-S, using settings fixed after Bottle development, sparse-only scoring improves image AUROC from 0.6780 to 0.7294 and AUPRC from 0.8052 to 0.8465. Paired bootstrap 95% intervals for the improvements are [0.0238, 0.0808] and [0.0170, 0.0650], respectively. However, sparse-only scoring reduces mean clean AUROC from 0.9890 to 0.9133 on four held-out MVTec categories and degrades Bottle localization. These findings show that residual decomposition can help when domain shift strongly contaminates anomaly evidence, but preserving defect structure remains the limiting problem.

0.20

Training-Free Human-in-the-Loop Anomaly Detection via Memory Bank Correction

cs.LG ·2026-08-18 ·Ayusha Abbas, Saram Abbas, Kabita Adhikari
similarity 0.68
Abstract · 15 pages, 9 figures, 5 tables

Anomaly detectors are hardest to deploy exactly where training data is scarcest: a newly commissioned production line has a handful of verified "golden" samples and no machine-learning engineer on the factory floor. We present a training-free human-in-the-loop framework in which a domain expert corrects a PatchCore detector by direct memory bank editing: no retraining, no gradients, no original training data. A false-positive correction inserts the reviewed image's normal patches through a self-calibrating novelty gate admitting only those beyond the median pool-normal nearest-neighbour distance. From a bank built on only ten golden samples, operator corrections close a median 66% of the gap to an uncorrected fully trained bank (mean 80%, raised by three categories that overshoot parity), significantly improving 12 of 15 MVTec AD categories and harming none: ten samples plus corrections outperform hundreds of samples without them. On already-trained banks the headroom is smaller and concentrated where the bank undersamples normal appearance (gated: toothbrush +0.10, metal nut +0.09, zipper +0.05, screw +0.05), and no category except grid is significantly harmed. Evaluation uses a held-out protocol (20 splits per category, Holm-corrected Wilcoxon), because corrected images entering the bank inflate naive evaluation toward AUROC 1.0 by memorisation. Passive and active querying are statistically indistinguishable; a matched-label-budget control attributes gains to deployment-time label production at 43% of exhaustive-review cost; a defect-memory extension fails decisively. Feedback is simulated from ground truth; live expert trials, where mislabelling is costliest on small banks, remain future work.

0.27

Distribution-free false-alarm calibration and chance-corrected spatial evaluation for industrial anomaly detection

cs.CV cs.LG ·2026-08-15 ·Jie Deng
theory similarity 0.68
Abstract · 15 pages, 3 figures, 9 tables

Studies of industrial visual inspection commonly report the area under the receiver operating characteristic curve (AUROC) and the overlap between anomaly maps and defect masks. Neither measure specifies the false-alarm rate at a selected threshold, while recurrent defect locations and mask geometry can inflate overlap. We combine a distribution-free upper tolerance threshold with a paired-minus-crossed spatial test. This test compares each detector's score-contributing locations with the matched defect mask and with masks from other images; the difference in rates defines spatial-evidence lift relative to the empirical chance-overlap rate. We evaluate three detectors on 120 point-defect images from three ISP-AD modalities and three fixed data splits. Of 378 alarms, 230 overlap the matched mask. Paired and crossed rates are nevertheless similar in eight of nine detector--modality cells; only DINOv2--ASM has a positive 95\% bootstrap lower bound (lift 0.259, 95\% interval 0.159--0.347). On the independent Magnetic Tile Defect dataset, the same analysis gives lifts of 0.203 (0.169--0.236) for Wide ResNet-50 (WRN50) patch memory and 0.231 (0.202--0.262) for Vision Transformer B/16 (ViT-B/16) patch memory, with one-sided permutation $p=10^{-5}$ for both. When crossed masks are restricted to the same defect class, the lifts remain 0.185 and 0.210. Exact sample planning shows that, with 150 calibration normals, a 95\%-confidence distribution-free claim is supported only for target false-positive rates of 1.98\% or higher; a 1\% target requires at least 299 normals. The results support reporting operating-point performance and chance-corrected spatial evidence alongside AUROC and raw mask overlap.

0.10

Reproducing INP-Former: Reconstructing Intrinsic Normal Prototypes for Industrial Anomaly Detection

cs.CV cs.LG ·2026-10-31 ·Yunfei Liang, Juan Pablo Osorio Rivera
code/data similarity 0.67
Abstract · Reproducibility study. 12 pages of main text (excluding references and appendix), 14 tables. Code available at https://github.com/garasnote/…

We reproduce the central claims of INP-Former, a reconstruction-based method for multi-class industrial anomaly detection. INP-Former extracts Intrinsic Normal Prototypes (INPs) from each test image and uses them to guide a decoder that reconstructs normal features, without a stored memory bank. Using the authors' released code, we reproduce the reported performance on MVTec AD and VisA and extend the evaluation to MVTec AD 2, where image AUROC with the default settings is 63.4, compared with 99.7 on MVTec AD. On MVTec AD, a five-seed ablation shows that most of the performance comes from the INP mechanism, while the two auxiliary losses add small changes whose direction depends on the metric. A paired comparison with both losses disabled confirms the benefit of INP on MVTec AD 2. The default of six prototypes transfers less well: the plateau beyond four prototypes reproduces on MVTec AD and VisA, but on MVTec AD 2 a single prototype outperforms six in AU-PRO on the public split and on both hidden test splits. We also measure practical trade-offs in resolution, backbone size, training length, and LoRA adaptation, and examine performance by defect size, lighting condition, and a stricter AU-PRO limit. Several conclusions from the original benchmarks, including the default prototype count, do not carry over to harder data. Code: https://github.com/garasnote/Repro-INPFormer

0.34

Robust Logical Anomaly Detection under Capture Shifts via Synthetic Anomalies

cs.CV cs.LG ·2026-10-13 ·Ufuk Efe, Alptekin Temizel
benchmark similarity 0.66
Abstract · 42 pages, 10 figures, 15 tables

Detectors of logical anomalies, such as missing, extra or wrongly combined parts, usually score a test image by its distance from normal (good) images. They achieve near-perfect image-level AUROC on standard industrial anomaly detection benchmarks such as MVTec LOCO, but their robustness to changes in capture conditions remains largely unexamined. Under a heterogeneous perturbation protocol in which each test image is randomly kept unaltered or subjected to a brightness reduction or a zoom-out transformation, the normal-reference methods we tested lose 9.7 to 34.1 AUROC points, and two of the strongest, CSAD and SALAD, fall from 97.7% and 96.4% to 68.1% and 62.3%. We propose a framework in which a classifier, trained on normal images and on synthetic anomalies, scores a test image without comparing it with normal data. From a short description of each product, a language model derives anomaly types and editing instructions, an image editor applies them to normal images, and the classifier learns to separate the edited images from automatically discovered normal sub-modes. With its full training recipe, the framework reaches 94.9% AUROC on clean images, 1.5 to 2.8 points below SALAD and CSAD, and 94.1% under the perturbation protocol. Trained without brightness or zoom-out augmentation, so that neither test perturbation occurs in training, it still reaches 92.5% (93.2% clean). These results suggest that clean benchmark scores can hide a strong sensitivity to capture conditions, and that learning the decision from both normal images and rule violations may reduce it.

0.14

REDiff-AD: No Training and No Target Masks for Industrial Anomaly Image Generation via Diversity-Driven In-Context MMDiT

cs.CV ·2026-11-07 ·Chih-Yu Tsai, Chih-Heng Chang, Jian-Jiun Ding
publishedcode/data similarity 0.65
Abstract · Accepted to WACV 2027

Industrial anomaly detection is challenged by the scarcity and diversity of real defects, leaving insufficient anomalous data to effectively train downstream models. Existing anomaly generation methods often require product-specific fine-tuning, target mask annotation, or costly procedures to achieve realistic and diverse defects. We propose REDiff-AD, a framework that requires neither model training nor target masks and introduces Rectified Flow MMDiT into industrial anomaly generation for efficient sampling with fewer generation steps. Given a normal product image and a single masked reference anomaly, REDiff-AD employs in-context learning to transfer the defect appearance from the reference into the normal image. Internal attention signals generated during this process are further reused to localize the synthesized anomaly, while edge and color cues refine the localization into pixel-level pseudo-masks. Two lightweight modules further improve generation quality: adaptive reference conditioning enhances defect fidelity, while diversity guidance promotes varied defect patterns without additional training. Experiments demonstrate that REDiff-AD can well address the tradeoff between realism and diversity for anomaly pattern generation and achieve competitive downstream anomaly classification, detection, and localization performance. These results show that REDiff-AD is a simple, efficient, and effective solution for large-scale anomaly data augmentation and pixel-level data construction. Github code: https://github.com/efdefe4-droid/REDiff-AD

0.39