CS Paper Radar

Photorealistic Novel View Synthesis of Human Faces using Next-Scale Transformers

Federico Stella, Fei Jiang, Zhongshi Jiang, Zohar Barzelay, Emanuel Garbin, Amin Jourabloo, Liuhao Ge

cs.CV cs.LG ·submitted 2026-08-24 15:55 UTC · v1

Abstract

Photorealistic novel view synthesis of people remains challenging at high spatial resolutions and across multiple target cameras, where preserving identity, fine appearance details, and geometric coherence is critical. We build on the next-scale autoregressive paradigm and adapt it for human-centric view synthesis by enabling higher image resolutions, multi-view outputs and stronger cross-view consistency in a single forward pass. We train on a synthetic dataset of human faces spanning diverse identities and apparel. Contrary to diffusion models, this paradigm does not need 2D pre-training and, thanks to its next-scale architecture, it benefits from lower-resolution, general-purpose pre-trainings, with the full-sized purpose-specific images being used only in the last training stages. This enables our architecture to converge with a smaller amount of purpose-specific training data, allowing us to use a smaller but more realistic training dataset. The resulting model produces sharp and realistic views, with the option to synthesize multiple novel viewpoints simultaneously for improved agreement across views. Empirically, we observe gains in perceptual fidelity and cross-view coherence on human subjects, demonstrating that next-scale autoregression is an effective backbone for scalable, multi-output human view synthesis. We also couple our pipeline with an existing transformer-based model for pixel-aligned 3D gaussian lifting from multi-view facial inputs, resulting in accurate and photorealistic 3D models of human faces.

Closest papers

Nearest neighbours by meaning across the whole index.

DIME: Scaling Facial Representation Learning via Differential Masked Autoencoding

cs.CV ·2026-10-12 ·Hao Yu, Haoyu Chen, Hui Wei, Yan Jiang, Nicu Sebe +1 more
similarity 0.73
Abstract

Scaling up data and model capacity has driven substantial progress in visual representation learning. However, conventional pretext tasks exhibit diminishing returns on fine-grained facial analysis. We attribute this to a scaling bottleneck: these tasks model each image's appearance and are dominated by identity, pose, and illumination, so subtle within-identity facial differences contribute little to the training signal. We introduce DIME, a differential masked autoencoder for large-scale facial representation learning. DIME builds on a simple observation: two images of the same person share identity-specific appearance, so their difference exposes facial changes. DIME reconstructs both masked images in an identity-matched pair and, through an Explicit Differential Direction Supervision (EDDS) objective, aligns the direction of their reconstructed difference with the true difference, while source isolation makes each reconstruction depend only on its own image. Shared appearance cancels in this difference, and because EDDS ignores magnitude, subtle facial changes count as much as large pose or illumination changes. DIME uses identity labels only to form pretraining pairs, requires no dense annotations, and learns dense facial representations with emergent part-level semantics. We pretrain DIME on 20 million high-resolution facial images consolidated from existing face datasets. DIME's AU detection performance continues to improve as pretraining data scales from 6M to 20M images, with its BP4D F1 increasing by 5.9 points, while MAE gains only 0.5 points on the same subsets. DIME also outperforms specialized facial methods on AU detection, AU intensity estimation, cross-domain anti-spoofing, landmark localization, head pose estimation, face parsing, and face generation.

0.21

Video Diffusion Avatars: Taming Video Diffusion Models into Controllable 3D Avatars

cs.CV ·2026-10-16 ·Simon Giebenhain, Tobias Kirschstein, Liam Schoneveld, Davide Davoli, Zhe Chen +1 more
benchmark similarity 0.72
Abstract · Project webiste: https://simongiebenhain.github.io/video-diffusion-avatars/

Video diffusion models (VDMs) trained on internet-scale data encode a rich prior on appearance, motion, and physics that is difficult to replicate with explicit 3D rendering and costly 3D data capture. We introduce Video Diffusion Avatars (VDAs), a method that creates photo-realistic, multi-view consistent avatars from a single image by fine-tuning a VDM for precise control over camera viewpoint, facial expression, and upper-body pose. Departing from 3D morphable models (3DMMs), VDAs use a learned expression space that lifts the expressiveness ceiling of 3DMMs, e.g., for the tongue and mouth interior. However, learned expression codes exhibit heavy viewpoint bias, as our DISTRACT benchmark reveals. We show that this bias can be removed through disentanglement, enabling their use as driving signals for multi-view consistent avatars. Camera and upper-body pose are controlled jointly via proxy-mesh renderings, giving independent control over expression, pose, and viewpoint. A camera-triplet training strategy makes the approach efficient: our models train for 34 hours on a single A100 using only public multi-view data. VDAs outperform state-of-the-art single-image 3D avatars on novel-view reenactment, reducing face LPIPS by 29% and improving perceptual quality (JOD) by 66% on BecomingLit. A static 3DGS reconstruction probe further confirms that our generations are the most multi-view consistent. Built on a video prior, VDAs produce effects beyond the reach of explicit renderers, including physically plausible hair dynamics, shadows, reflections, and refractions.

0.22

NAMVIS: Next-Scale Autoregressive Multi-View Image Synthesis

cs.CV ·2026-10-03 ·Ramil Khafizov, Ilya Statsenko, Ruslan Rakhimov, Artem Komarichev, Peter Wonka +1 more
top venue similarity 0.72
Abstract · Accepted at NeurIPS 2026

Sparse-view novel view synthesis is a central problem in 3D content creation, but diffusion-based approaches remain limited by iterative denoising, making multi-view generation expensive at inference time. We introduce NAMVIS, a diffusion-free framework that reformulates multi-view image synthesis as geometry-conditioned next-scale autoregression. Instead of generating target views through repeated denoising, NAMVIS predicts discrete visual tokens through a small number of coarse-to-fine scale steps, while sampling all tokens within each scale and across target views in parallel. To anchor this generation process to explicit camera geometry, we propose Multi-scale Projective Pose Encoding, which injects source and target camera transformations into both target-view self-attention and source-to-target cross-attention at every resolution. NAMVIS further combines global conditioning with dense geometry-aware cross-attention, enabling the model to preserve source-view appearance while maintaining target-view consistency. Across Objaverse, GSO, and OmniObject3D, NAMVIS outperforms diffusion-based baselines in PSNR, SSIM, and LPIPS, while running over 3 times faster than the evaluated diffusion baselines under the same evaluation setting. These results suggest that geometry-conditioned next-scale autoregression is a promising and efficient alternative to diffusion for sparse-view multi-view synthesis. Additional qualitative results, videos, and resources are available at https://corl-team.github.io/namvis/

0.43

Video Generative Models as Geometry Learner

cs.CV cs.AI ·2026-08-28 ·Haosen Yang, Jifei Song, Zhensong Zhang, Xiatian Zhu, Jiankang Deng
top venuecode/data similarity 0.70
Abstract · 19 pages, 4 figures, 5 tables. Project page: https://happy-hsy.github.io/projects/GeoNeXt/

Recent generative approaches to geometry estimation adapt pretrained image diffusion models and treat the task as image-conditioned generation. Leveraging off-the-shelf image diffusion models, they either (i) train task-specific geometry models (for depth and surface normal estimation) independently, losing the opportunity of exploring the intrinsic correlation of these geometric targets, or (ii) jointly fine-tune modified image diffusion backbones (e.g., altered self-attention), which typically demands substantial labeled data. To overcome these limitations in a principled fashion, we repurpose pretrained video generative models as a unified and data-efficient framework for geometry estimation, formulated innovatively as a next-frames prediction task. Our method, GeoNeXt, inherits naturally structured knowledge and richer priors from the video model, while further adapting them for joint modeling of images and geometry targets (image <-> geometry), enabling more data efficient and effective learning of geometry. Extensive experiments validate our method for zero-shot monocular depth and surface normal estimation across diverse datasets, outperforming both previous task-specific and unified generative competitors while using substantially less training data. Notably, our method rivals discriminative state-of-the-art approaches trained on over 100x more data and even standouts on several benchmarks.

0.66

An Evaluation Framework for Generating Multi-View Images of a Person in a Scene

cs.CV ·2026-09-04 ·Mahir Majid, Young Kyung Kim, Guillermo Sapiro
similarity 0.69
Abstract · 8 pages, 3 figures

Recent generative image-editing Diffusion Transformers (DiTs) demonstrate impressive semantic editing capabilities but still struggle with spatially consistent camera angle changes. A primary bottleneck in training foundation models to execute free-form, promptable camera angle changes is the lack of specialized training data. While multi-view datasets exist for generic 3D environments and objects, there remains an absence of paired, multi-view datasets featuring human subjects at fixed locations in natural scenes, including frontal and side-profile views. Capturing such multi-camera data in unconstrained environments is logistically challenging and unscalable. In this paper, we first experiment with multiple state-of-the-art image editing models to create this data synthetically, but find that the outputs are frequently prone to hallucinations involving how much the subject's head turns relative to the background, often producing inconsistent environments. To address this issue, we propose the Head Scene Rotation Difference (HSRD) metric to quantitatively evaluate camera movements around a person. The proposed metric operates by decoupling camera movement from localized head pose manipulation. As demonstrated by the extensive experimentation, HSRD provides the pipeline necessary to evaluate 3D spatial parallax for a person in a scene, paving the way to reliably construct high-quality multi-view synthetic datasets.

0.26

Multiple View Neural Regression of a Facial Shape Model

cs.CV ·2026-08-23 ·Xiang Li
similarity 0.69
Abstract

Creating re-topologized 3D facial meshes is essential for high-quality facial animation but remains labor-intensive and time-consuming. This dissertation explores more efficient approaches for capturing production-ready facial meshes through: (1) the development of VarIS, a custom light sphere for capturing high-resolution stereo geometry and reflectance maps; (2) analysis of camera parameters affecting automatic 2D and 3D landmarking; (3) synthetic-data methods for training neural face regression; and (4) techniques for improving neural multi-view face-shape regression. While VarIS enables photorealistic face capture, its operational and processing costs motivate a more scalable approach. A deep learning framework is therefore proposed to directly predict re-topologized facial meshes from synthetic multiview images generated with Visage Craft, an in-house physically based rendering system using an Appearance 3D Morphable Model (A3DMM). The system produces standardized meshes ready for rigging and animation with minimal human supervision. Results show that incorporating accurate camera intrinsics and extrinsics improves landmark accuracy and geometric consistency, while 3D landmark regularization further improves reconstruction quality.

0.14

Decoupling Appearance and Geometry in Diffusion World Models

cs.GR ·2026-09-28 ·Rajit Rajpal
similarity 0.69
Abstract

We study the problem of learning diffusion-based world models that jointly capture scene geometry and visual appearance in complex first-person environments. Existing approaches typically train a single action-conditioned model that predicts future RGB frames, but they either ignore geometry or require action supervision for all modalities, limiting scalability to large unlabeled video datasets. In this work, we introduce a two-stage diffusion world model that separates geometric and appearance prediction while maintaining joint temporal coherence. Our key idea is a staggered RGB-depth formulation: depth at time $t+1$ is predicted first using an action-conditioned diffusion transformer, and the RGB frame at the same timestep is then generated conditioned on this predicted depth using a second diffusion model without action inputs. We show that this decoupled design faithfully approximates a hypothetical joint RGBD diffusion model trained with diffusion forcing, enabling the second stage to be trained or fine-tuned on additional RGB-depth data without requiring action labels. Experiments on the CS:GO Dust 2 dataset demonstrate that our approach improves both depth accuracy and RGB fidelity compared to fully joint models and RGB-only baselines, while significantly enhancing scalability to augmented or unlabeled datasets. Our results highlight the effectiveness of geometry-guided diffusion for world modeling and open a path toward large-scale action-free video model training. Code to be released upon acceptance of paper.

0.27

Identity-Conditioned Latent Consistency Distillation for Face Synthesis

cs.CV ·2026-08-31 ·Tiago Kienen Chaves, Bernardo Biesseck, David Menotti
publishedcode/data similarity 0.69
Abstract · Accepted for presentation at the 2026 Conference on Graphics, Patterns and Images (SIBGRAPI)

Diffusion models have achieved strong results in high-fidelity image synthesis, but their iterative sampling process makes large-scale generation computationally expensive. This limitation is especially relevant when generating synthetic face datasets for face recognition, where a large number of subjects with many samples in different poses, expressions, ages, etc., are required. In this work, we show that identity-conditioned face synthesis can be performed at a substantially lower computational cost by a latent Consistency Model with few iterations, without compromising image quality. For training, we distill knowledge from the foundation Diffusion Model Arc2Face (teacher) by adapting its original text-to-image pipeline to an embedding-to-face setting, replacing textual prompts with ArcFace identity embeddings. Our distilled model (student) generates identity-conditioned face images with an average inference time of 0.4819 seconds per image, compared with 2.102 seconds for Arc2Face, resulting in a 4.36$\times$ speed-up. Quantitative results, based on FID scores, show that the distilled model remains competitive with Arc2Face across all evaluation protocols. On 100k generated images, it achieves near-parity on CelebA (13.921 vs. 12.928) and outperforms the teacher on WebFace42M (9.317 vs. 9.802). Further evaluations on Synth-500 and AgeDB show a moderate performance gap for the former but comparable results for the latter. These results indicate that Arc2Face can be accelerated through task-specific latent consistency distillation while preserving high image quality for large-scale synthetic face generation. Our proposal is publicly available at https://github.com/UFPR-IPASP-PR/FaceRec-IdentityConsistency.

0.33