CS Paper Radar

Learning the Kohn-Sham map with neural operators for quasi-linear scaling density functional theory

Danish Khan, Maurice D. Hanisch, Nikolai Argatoff, Evan Xie, Sandeep Sharma, Anima Anandkumar

cs.AI physics.chem-ph ·submitted 2026-08-24 23:05 UTC · v1

Abstract

Kohn--Sham density functional theory (DFT) underpins electronic-structure simulations, but repeated orbital diagonalizations lead to cubic scaling, restricting quantum calculations to modest scales only. Eliminating these auxiliary orbitals while retaining Kohn--Sham accuracy is the central goal of orbital-free DFT, but both analytical and machine-learning methods have so far fallen short. Prior learning approaches either try to learn the variational kinetic-energy functionals, which are ill-conditioned, or directly predict the ground state, which extrapolate poorly to larger systems. Instead, we identify the Kohn--Sham map as the right learning target for orbital-free DFT. It maps a Kohn--Sham potential directly to the corresponding density and noninteracting kinetic energy, quantities otherwise obtained through an orbital diagonalization. Focusing on the density component in this work, a domain-invariant $\mathrm{SE}(3)$-equivariant Fourier neural operator learns to predict it from the potential as input on real-space grids, enabling stable quasi-linear scaling SCFs. Trained jointly on 8,504 molecules and solids, a single model generalizes to out-of-distribution organic molecules, insulators, and metals. For the first time, the same method converges SCFs across these systems without explicitly constructing Kohn--Sham orbitals, while reproducing densities, electronic spectra, and structural observables at Kohn--Sham DFT accuracy. Linear-scaling SCFs additionally allow converging magnesium dislocation densities containing up to 82,500 valence electrons on a single GPU.

Closest papers

Nearest neighbours by meaning across the whole index.

Where the Error Lives: Spectral Representations of Learned Kohn-Sham Hamiltonians

cs.AI physics.chem-ph ·2026-10-27 ·Fang Sun, Hekai Cheng, Ruoyan Li, Yuanzhou Chen, Wei Wang +2 more
similarity 0.75
Abstract

Kohn-Sham density functional theory (DFT) is the standard method for computing the electronic structure of molecules and materials, but its self-consistent-field (SCF) iterations make it expensive for large systems and high-throughput screening. Machine-learned Hamiltonian models offer a shortcut: an equivariant network predicts the Kohn-Sham Hamiltonian matrix in one forward pass, and diagonalizing the prediction yields orbital energies, the HOMO-LUMO gap, molecular orbitals and the electron density. These models are trained to match the reference matrix entry by entry, yet a small entry-wise error does not guarantee accurate eigenvalues or eigenvectors. Two physics-informed alternatives go partway: a recently proposed wavefunction-alignment loss adds a spectral penalty without diagonalizing the prediction, and matching the electron density of the diagonalized prediction supervises it directly. Neither is complete: by representing the prediction error in the eigenbasis of the reference Hamiltonian, we show that each sees only part of the error, and that shifting the predicted orbital energies leaves the electron density exactly unchanged. The same analysis identifies a complete training signal: the cumulative local density of states (cumulative LDOS), the number of electrons at each point in space with energy below a given threshold. The cumulative LDOS is a single physical observable that contains the electron density as a special case, responds to every component of the error, determines the Hamiltonian uniquely, and yields gradients that do not vanish for large orbitalenergy errors. Fine-tuning three Hamiltonian networks on QH9 in this way, which we call FermiScope, reduces the HOMO-LUMO gap error without increasing the element-wise error. The gains carry over to out-of-distribution and molecular-dynamics splits, where the wavefunction-alignment loss helps less.

0.19

Electron-Density-Informed Molecular Property Prediction Using Surrogate Functionals

cs.LG physics.chem-ph ·2026-10-09 ·Manuel V. Klockow, Simon Wagner, Roman Remme, Dominic Plein, Fred A. Hamprecht
similarity 0.72
Abstract

Machine learning methods are increasingly used to predict chemical properties directly from the molecular structure to bypass the often prohibitive cost of quantum mechanical calculations. Recent work has shown that including the ground-state electron density as input to the machine learning model can improve accuracy in this setting. This work employs the recent surrogate functional framework originally developed for orbital-free density functional theory and extends it to predicting molecular properties. We show that passing the ground-state density as input to the model, while simultaneously enforcing it to be the minimum of the surrogate functional, surpasses state-of-the-art performance for six out of seven extensive properties of the QM9 dataset. Additionally, the approach shows improved generalization to larger molecules taken from the QM40 dataset. On all extensive properties of both datasets, our approach outperforms models that are informed by the ground-state density but do not enforce the surrogate functional constraints.

0.16

All-electron machine-learned orbital-free density functional for periodic CHNO systems

cs.LG physics.chem-phcond-mat.mtrl-sciphysics.comp-ph ·2026-10-13 ·Marc K. Ickler, Andreas Hermann, Fred A. Hamprecht
similarity 0.71
Abstract · 37 pages, 7 figures, 3 tables (including Supplementary Information). Supplementary Data 1 will be available with the journal version

We introduce STRUCTURES-P, a machine-learned all-electron orbital-free density functional for periodic CHNO systems. Electrostatics are evaluated analytically in an atom-centered Gaussian basis, while an equivariant network learns the kinetic and exchange-correlation energy from energies and gradients of non-ground-state densities. Minimizing the functional from a superposition of atomic densities recovers the Kohn-Sham ground state: on held-out crystals, the density error falls from 6.7% to 0.4% of the electron count and the energy error reaches 0.25 mHa per atom, half that of a same-architecture interatomic potential. A single functional can be trained for both isolated molecules and periodic systems, and the model generalizes to larger unit cells. It largely preserves relative-energy rankings and reproduces convex-hull vertices on the tested H-N composition slice. Together, these results demonstrate the viability of machine-learned all-electron orbital-free DFT for variational density optimization and energy evaluation in fixed-geometry solids.

0.17

Neural-Network Solutions to Real-Space Charge Density and Generalization

cs.AI cond-mat.mtrl-sci ·2026-09-14 ·Yuxuan Zeng, Tong Xie, Taoyuze Lv, Zhicheng Zhong
theoryhot direction similarity 0.70
Abstract

The Hohenberg-Kohn theorem establishes that, in principle, the ground state (GS) charge density contains all GS information of a many-electron system, such that all GS observables can be expressed as functionals of the GS charge density. Conventional Kohn-Sham density functional theory requires iterative solution of the self-consistent-field equations at substantial computational cost, motivating the development of deep learning surrogates for electronic structure calculations and, in turn, accelerating computer-aided materials design. Here, we propose AIDEN, an Atomic-Interaction Density Equivariant Network for solving real-space charge density. AIDEN separates the element-dependent one-center density from environment-induced density redistribution and represents the latter through complementary atom- and edge-centered tensor correlations. A continuous low-rank Gaussian decoder then reconstructs the density at arbitrary spatial coordinates while reusing atomic encodings independently of the evaluation grid. AIDEN achieves state-of-the-art accuracy on periodic crystal benchmarks while remaining competitive for molecular systems, and further demonstrates zero-shot transferability across several structurally distinct out-of-distribution case studies. Furthermore, AIDEN provides substantially faster inference than both baseline models and full SCF calculations, enabling efficient charge density reconstruction for large-scale electronic structure calculations.

0.26

UniHam: A Large-Scale SOC-Complete Dataset and Benchmark for Hamiltonian Learning in Materials

cs.LG cond-mat.mtrl-sci ·2026-11-09 ·Yuewen Huang, Pin Chen, Yutong Lu
top venuebenchmark similarity 0.70
Abstract

Accurate prediction of electronic Hamiltonians would enable broad property inference while avoiding the high computational cost of Density Functional Theory (DFT). However, progress toward general-purpose materials foundation models is limited by a data bottleneck: existing Hamiltonian datasets are typically small, lack structural diversity, and often omit essential relativistic physics such as spin--orbit coupling (SOC). We therefore construct UniHam, a large-scale Hamiltonian dataset and benchmark suite comprising 100,000+ DFT-computed complex-valued Hermitian Hamiltonians with full SOC, covering 72 elements and a wide range of crystal geometries and symmetries (spanning diverse lattice types and space-group families). Building on UniHam, we benchmark two representative state-of-the-art models under a standardized protocol and introduce complementary evaluation metrics that jointly assess three dimensions: (i) Hamiltonian reconstruction accuracy, (ii) out-of-distribution (OOD) generalization across composition/symmetry shifts, and (iii) the ability to support downstream property prediction from the predicted Hamiltonians. Experiments on UniHam demonstrate that the proposed benchmark and metrics effectively differentiate model capabilities, revealing intrinsic SOC- and element-dependent failure modes, large variations in compositional OOD robustness, and the necessity of spectral-level evaluation to assess whether Hamiltonian predictions reliably support downstream electronic-structure properties. Overall, UniHam provides a reproducible, SOC-complete benchmark that can sharpen model comparisons and accelerate the development of next-generation foundation models for quantum materials.

0.27

Physics-Aligned Electronic Ground-State Learning Improves Generalization

cs.LG physics.chem-phquant-ph ·2026-10-07 ·Eike S. Eberhard, Xaver Kainz, Viktor Kotsev, Abdulrahman Aldossary, Stephan Günnemann
similarity 0.70
Abstract

Machine-learned interatomic potentials (MLIPs) excel at in-distribution tasks, accelerating drug and material development, yet they struggle to generalize out-of-distribution. We propose to push the cost-accuracy Pareto frontier by designing observable-agnostic electronic ground-state descriptor models (GSMs) with computational costs situated between MLIPs and Kohn-Sham density functional theory (KS-DFT). We align the learning objectives and architectures of GSMs with the governing equations of KS-DFT by enforcing physical constraints and removing optimization pressure on unphysical or irrelevant degrees of freedom. In our size-extrapolation experiments from QM9 to QM40, our combined contributions OrthoNormal-Loss (ON-Loss) and Grassmann Restricted Occupied-Orbital Training (GROOT) reach a 79.1% energy and 83.4% force mean absolute error (MAE) reduction over previous state-of-the-art density GSMs. For Hamiltonian GSMs, ON-Loss and Residual Optimal-gauge Conditioning-aware KS-Eq. Training (ROCKET) together reduce the energy and force MAEs of the strongest baseline by 99.8% and 95.9%, respectively. Using a self-consistency rejection criterion, we filter out extrapolation errors on QMugs, rejecting fewer than 0.4% of predictions while reaching an energy MAE of 0.07 mHa. Finally, we demonstrate the efficiency of label-free self-consistency fine-tuning, and transfer GSMs to reactive chemistry in Transition1x, reaching energy errors below chemical accuracy.

0.26

Scaling Density Functional Theory with Gaussian Splatting

cs.LG physics.chem-phcond-mat.mtrl-sciphysics.comp-ph ·2026-09-25 ·Andrés Guzmán-Cordero, Cindy Zhang, Majdi Hassan, Marta Skreta, Kirill Neklyudov +1 more
similarity 0.70
Abstract · 45 pages, 6 figures, 18 tables

Density functional theory (DFT) strikes a practical balance between accuracy and computational cost in many problems of computational chemistry and materials science. However, many DFT calculations are limited by fixed atom-centered basis sets, which dictate how accuracy and cost scale with system size. We propose Gaussian Splatting for Density Functional Theory (GS-DFT), which represents molecular orbitals as a cloud of Gaussians whose positions, shapes, and mixing coefficients are optimized jointly by gradient descent to minimize the energy without training data. Conceptually, GS-DFT is 3D Gaussian splatting with the renderer replaced by quantum mechanics. We introduce two key solver components: adaptive density fitting with screening for efficient evaluation of two-electron integrals, and a regularized differentiable orthogonalization of the molecular orbitals. Empirically, the optimized basis reaches the accuracy of the largest conventional basis sets with a fraction of the parameters, converging systematically in energy, density, and nuclear forces. At equal parameter count, it captures the stretched-bond and anion physics that fixed bases only recover with specialized basis augmentation. The resulting solver exhibits quadratic peak memory scaling in the cloud size, allowing us to simulate systems of up to 2,742 atoms (10,406 electrons) without any modifications at triple-zeta scale using a single four-GPU node.

0.13

Equivariant Flow Matching for Electron Density Prediction

cs.AI physics.chem-ph ·2026-10-02 ·Chenxing Liang, Chengdong Wang, Yuchao Lin, Xiaofeng Qian, Shuiwang Ji
benchmark similarity 0.68
Abstract

Machine learning surrogates for density functional theory (DFT) have been increasingly used to reduce the cost of first-principles calculations. In this arena, predicting real-space electron densities offers a scalable and transferable initialization for self-consistent field (SCF) procedures. However, current methods face a clear dilemma. That is, grid-based architectures incur a high computational cost, while basis-set methods fail to capture the structural correlations inherent in the coefficient space. Here, we develop OrbFlow, an $\mathrm{SE}(3)$-equivariant generative model that predicts Gaussian-type orbital (GTO) coefficients via flow matching. OrbFlow retains the efficiency of a compact atom-centered basis while replacing pointwise regression with a learned probability path over the full coefficient space. It is trained through a two-phase trajectory curriculum that mitigates discretization drift during numerical integration. OrbFlow achieves state-of-the-art accuracy on QM9, reducing density error by 13.6% relative to the previous best model, and reduces error by 51% to 63% on every molecule of the MD benchmark relative to the strongest prior method sharing its basis. The predicted density also cuts SCF iterations by up to 68% with zero-shot transfer to unseen exchange-correlation functionals and recovers dipole and quadrupole moments to within a few percent of DFT references without any SCF calculation.

0.17