CS Paper Radar

More GPUs or a Smaller Cache? Tensor Parallelism versus KV Compression for Memory-Bound LLM Serving

Srikanta Datta Tumkur, Mehar Simhadri, Anshu Bansal, Jay Iyer, Sai Pavan Kumar, Sai Kapil Kumar, Ramesh Nampelly, Raj Dandekar

cs.AI ·submitted 2026-08-25 01:42 UTC · v1

Abstract

When an LLM serving deployment runs out of KVcache room, there are two well-established ways out. Tensor parallelism shards the weights and the KV cache across two, four, or eight devices, buying memory headroom at the price of an all-reduce on every layer and a hardware bill that grows with the device count. The algorithms community shrinks the cache in place, with KV quantisation and eviction keeping a single GPU and spending a little quality instead. Compression papers report memory ratios, parallel-scaling papers report throughput curves, and almost nobody puts the two on the same cost axis. We place tensor-parallel configurations (degree 1 to 8) and KV-compressed configurations (16/8/4-bit, keep-ratios down to 0.25) on one costnormalised axis, cost per million tokens against latency, using a profiled simulator calibrated on A100, A40, and H100 hardware, and we go looking for the cost-equivalence crossover. We do not find one. Across two models (Llama-2 at 7B and 70B), three GPU types, and every level of memory relief we could construct, compression is cheaper by 1.20x to 2.00x. A 7B model on an 80 GB device cannot exhaust its KV budget within its own context window, and the boundary that decides between the strategies is model size relative to device memory, at roughly 36B parameters for an 80 GB card. Below that wall, compression dominates and extra GPUs are largely wasted spend; above it, tensor parallelism stops being a choice and becomes an entry ticket: Llama-2-70B is infeasible on one A100 at any KV setting, because the binding resource is weights, which KV compression does not touch. Tensor parallelism is the only lever that improves latency (compression makes per-token latency worse, by 8 to 93%, through batching contention), while compression is the only lever that multiplies capacity per dollar (16.5x, against 1.21x for an eightfold spend on GPUs).

Closest papers

Nearest neighbours by meaning across the whole index.

Range: Decoupling KV-Cache Reuse Granularity from Storage Work

cs.OS ·2026-10-15 ·Dingsen Shi, Jiahao Zhang, Liqiang Lv, Boming Huang, Yanbo Dai +5 more
similarity 0.72
Abstract · 14 pages, 10 figures, 3 tables

LLM serving reuses cached key-value (KV) state to skip prefill, and growing contexts push that state past GPU HBM and CPU DRAM onto NVMe SSDs, placing prefix restore on the critical path of time-to-first-token (TTFT). We find that on a well-configured host-issued path the SSD is not the bottleneck: restoring the same 6 GiB of KV takes 2.1 s as 192 objects but 3.0 s as 6,144 objects, and more under layerwise loading, because every layer of the storage stack - lookup, allocation, I/O submission, GPU delivery, store, index - charges per logical object while the bytes stay the same. This cost grows with the KV footprint: longer contexts, deeper models under layerwise loading, and tensor parallelism each multiply the object count. Prior systems move this per-object work from the CPU to the GPU; the work remains per object. This paper presents Range, a KV-cache storage engine for vLLM and LMCache built on one principle: every cost on the storage path scales with bytes or physical batches, never with logical objects. Range tickets replace per-key lookup and ownership with token metadata and physical leases; byte stripes make the on-media layout independent of reuse granularity; completion-owned GPU transfer banks batch delivery and extraction and release each layer to attention as it lands. Range keeps the kernel cuFile path and changes four lines of vLLM. On a fixed 6 GiB restore, Range's median TTFT stays at 1.79-1.80 s across a 32x range of object counts and under layerwise delivery, within 70 ms of the prefix already being resident in GPU memory, while tuned in-process LMCache rises from 2.12 s to 3.01 s. Range improves on the fastest multiprocess DRAM-bounced path by 0.44 s at coarse granularity while moving no payload through host memory, and holds layerwise reuse at the cost of coarse-grained reuse, where the best stock path takes 2.24 s.

0.21

The KV Cache Is the New Memory Wall

cs.DC cs.LGcs.PF ·2026-09-25 ·Tejinder Singh
survey similarity 0.69
Abstract · 28 pages, 12 figures, 12 tables

Autoregressive LLM inference at long context is bounded by memory bandwidth, not arithmetic throughput, and the binding resource shifts from model weights to the Key-Value (KV) cache as sequence length grows. For Llama-3-70B in BF16, the 140 GB weight footprint exceeds the 80 GB HBM of a single accelerator, and one 128k-token sequence adds 42 GB of KV cache. Techniques that compress, evict, page, share, or offload KV state have proliferated, but reported gains use inconsistent workloads, hardware, and quality metrics, preventing cross-paper comparison. This SoK paper unifies the field analytically, with a protocol that strictly separates derived and reported claims. We derive closed-form arithmetic intensity as a decaying function of context length, parameterized by hardware topology for NVIDIA H100, NVIDIA B200, and AMD MI300X, including per-die bandwidth partitioning and the crossover lengths where KV traffic overtakes weight traffic. We classify the literature into five domains, quantization, token eviction, KV paging, prefix caching, and heterogeneous tiering, evaluating one method per domain at 128k context under a single protocol. The central finding is a three-regime structure: below a hardware-specific crossover, weight traffic dominates and KV compression yields negligible speedup; beyond it, KV traffic dominates and each domain trades quality for bandwidth savings approaching the roofline bound. Paging and prefix sharing are lossless but address capacity, not bandwidth. Quantization and eviction cut bandwidth directly, with degradation that accelerates below 4-bit precision and turns discontinuous for eviction on position-sensitive tasks. Tiering converts the bandwidth wall into an interconnect problem bounded by PCIe or NVLink rather than HBM. We close with design rules for selecting a compression domain given hardware, context length, and quality budget.

0.18

Building py-kvcache: A Performance Characterization of External KV Caching for vLLM with NVMe SSDs

cs.DC cs.LG ·2026-09-10 ·Joseph Kanichai, Tiziano De Matteis, Animesh Trivedi
code/data similarity 0.68
Abstract

Prefix caching can reduce the time to first token (TTFT) of long-context LLM requests by reusing previously computed key-value (KV) states, but for short prefixes or fast GPUs, recomputation can be faster than loading from an external cache. We characterize this tradeoff in vLLM across GPU, CPU, and NVMe tiers using synthetic workloads, long-context benchmarks, production traces, and find that cache performance depends on transfer granularity, intermediate memory use, and when transfers enter the request schedule, not only on device bandwidth. These findings motivate py-kvcache, a vLLM KV Offload connector with asynchronous direct I/O, bounded shared staging, and scheduler-aware preloading, which starts disk reads while requests are still waiting, overlapping with compute. At 80k tokens, py-kvcache loading from disk is 2.0x faster than LMCache, with preloading contributing 1.34x. With GPU, CPU, and disk caching enabled, it is 1.23x faster than LMCache and within approximately 4% of the native vLLM KV Offload implementation. LongBench and SCBench show that these benefits extend to irregular prefix chains and multi-turn workloads. Bailian trace replays improve TTFT on a weaker GPU, but on an H100 the average request falls below the break-even point and GPU memory alone retains enough prefixes. External KV caching should therefore be treated as a setup specific admission decision. The py-kvcacheimplementation is available at: https://github.com/atlarge-research/py-kvcache.

0.54

HAWK: Heterogeneity-Aware KV Cache Transfer for Efficient GPU-NPU Phase-Disaggregated LLM Inference

cs.AR cs.DC ·2026-10-21 ·Junhyeok Park, Jungeun Yoon, Kyungmin Kim, Hunsoon Lee, Shinyoung Ahn +1 more
similarity 0.67
Abstract · 14 pages, 13 figures, 9 tables

Large language model (LLM) inference exhibits distinct computational characteristics across its two phases: prefill is compute-intensive, whereas decode is more memory-bound. As a result, AI accelerators achieve varying levels of efficiency across the two phases. GPUs are well suited to prefill, but are often underutilized during decode. By contrast, NPUs can utilize their compute resources more effectively during decode. Motivated by this observation, we explore a heterogeneous architecture that integrates GPUs and NPUs, mapping prefill to GPUs and decode to NPUs to achieve high performance and efficiency. However, realizing such heterogeneous integration is challenging because LLM phase disaggregation requires KV cache transfer from prefill to decode (that is, from GPUs to NPUs), which is complicated by differences in inter-device communication mechanisms and KV cache tensor layouts. To address this, we propose HAWK, a transfer mechanism that enables rapid KV cache transfer across heterogeneous devices. HAWK establishes a remote direct memory access (RDMA) path for direct cross-device transfers while handling inter-device tensor layout discrepancies as part of the transfer process. In particular, HAWK allocates tensor-layout-aware RDMA buffers on the NPU side to match the target tensor layout. Leveraging these buffers, HAWK orchestrates data transfer from a conventional contiguous GPU RDMA buffer to the corresponding NPU buffers, allowing transferred tensors to be consumed directly without additional data rearrangement while maintaining transfer efficiency. We implement and evaluate HAWK on a system built with commercially available GPUs and NPUs, demonstrating performance within 7.88% of a GPU-only system under the same SLO constraints while achieving up to 1.26$\times$ higher power efficiency and 1.72$\times$ higher cost efficiency.

0.12

Instruction-Aware Transfer of GPU Implementation Crossovers: a Tensor-Product Discontinuous Galerkin Operator on GB200, H100, and A100

cs.PF cs.DC ·2026-11-11 ·Seiya Nishizawa, Yuta Kawai, Xuanzhengbo Ren
hot direction similarity 0.66
Abstract · 35 pages, 6 figures. Includes supplementary material. Submitted to The International Journal of High Performance Computing Applications

We compare up to six implementations of an FP64 tensor-product discontinuous Galerkin operator at p = 7-1023 on GB200, H100, and A100 with fixed numerics, input, and code. The fastest path is machine dependent: at p = 511, a fused-epilogue GEMM path is 5.0% faster than a fused Tensor Core kernel on GB200 and 6.9% slower on A100. Nominal-peak scaling reproduces the A100 ranking but fails on H100, where the cost of FP64 arithmetic in the profiler-defined FP64 budget depends on the instruction. We therefore price each issued instruction at its architecture-dependent cost in that budget, using a calibration-side counter profile and one derived calibration factor per kernel, with no fit to the target. A retrospective leave-one-GPU-out evaluation, holding out target timings and counters but not the model form, transfers the p >= 511 path times with 1.9% median error at the common MMA shape, and the direction of the crossover at the H100 shape. Restricting the streaming multiprocessors of one A100, with nothing fitted, reproduces the A100-to-GB200 reversal. At roduction-relevant orders the model does not resolve the fastest fused path; the result identifies the crossover mechanism.

0.27

Where Should the KV Cache Live? Placement Policies Across GPU, CPU, and SSD for Long-Lived Sessions

cs.AI ·2026-09-14 ·Srikanta Datta Tumkur, Jay Iyer, Mehar Simhadri, Sai Pavan Kumar, Sai Kapil Kumar +1 more
similarity 0.65
Abstract

GPU high bandwidth memory is scarce and expensive, and KV caches consume much of it as chats, agent loops, and document question answering accumulate state. Systems such as Mooncake, LMCache, FlexGen, InfiniGen, and AttentionStore extend GPU memory with CPU DRAM and SSD. The harder question is which blocks belong in each tier, when to move or evict them, and whether prefetching helps. We study these choices in a discrete event simulator spanning GPU HBM, CPU DRAM, and SSD, calibrated against a random forest execution time predictor. We compare recency, reuse frequency, predicted reuse, and an EWMA predictor with prefetch lookahead across chat, agent, and document question answering workloads. Tiering supports 73.02 times more concurrent sessions per GPU and lowers cost per session by 62.04 times. These gains come from tier capacities of 1 plus 8 plus 64, not placement policy. Decode is compute bound at batch size one in our setup, so placement barely affects throughput. It mainly changes PCIe migration traffic and time to first token. Recency produces 2.30 times less migration traffic than reuse frequency for chat. Reuse frequency performs best for agents and document question answering. The existing predicted reuse policy is byte identical to recency, making its agent recommendation effectively recency. A genuine EWMA predictor changes behavior but still ranks behind reuse frequency on the workloads prediction was expected to help. Prefetching does not justify its bandwidth cost. Across the policy and cache size grid, even an oracle with knowledge of future requests never beats no prefetch on migration traffic. Workload specific placement can reduce data movement, but the predicted reuse and prefetch recommendations are not supported as implemented.

0.18

Uncovering the Memory Hierarchy of Modern NVIDIA GPUs for Accurate Simulation

cs.AR ·2026-11-10 ·Ziwen Wang, Jiapeng Zhou, Changxi Liu, Dongsheng Wang, Yun Chen
similarity 0.65
Abstract · 14 pages, 8 figures, 6 tables

Emerging artificial intelligence workloads, particularly Large Language Models (LLMs), place unprecedented demands on GPU memory systems. Consequently, architectural innovations increasingly target the memory system to alleviate these bottlenecks. However, existing works still rely on outdated memory hierarchy models that fail to capture the complexities of modern hardware. This fidelity gap leads to inaccurate characterization and could misguide optimization strategies. To bridge this gap, we present GemAtlas, the first systematic reverse engineering of the memory hierarchy in modern NVIDIA GPUs. By developing fine-grained SASS-level benchmarking, we expose critical, previously undocumented micro-architectural details across different cache levels, including cache set associativity, slice-routing and set-indexing hash functions, replacement policies, coherence behavior, and interconnect topologies. We integrate these discovered micro-architecture details into the state-of-the-art GPU simulation framework. The final results demonstrate that GemAtlas reduces the mean absolute percentage error (MAPE) from 31.69% to 22.24% on average across four GPUs. Specifically, GemAtlas reduces the MAPE from 34.04% to 23.98% for real-world LLM operators.

0.22

NUMA-Torch: Compiler-Driven NUMA-Aware LLM Prefill on Multi-Socket CPUs

cs.DC cs.PFcs.PL ·2026-11-04 ·Thisara Rathnayaka Weerakoon, Ishan Dewpura, Niman Ransindu, Shavin Anjitha, Tharindu R. Patabandi +1 more
published similarity 0.65
Abstract · 11 pages, 8 figures. Accepted at the 2026 IEEE 33rd International Conference on High Performance Computing, Data, and Analytics (HiPC), Beng…

For sufficiently large transformer-based Large Language Models (LLMs), whose parameters cannot be retained in on-chip caches, prefill throughput on multi-socket CPUs is often limited by sustainable DRAM bandwidth rather than peak floating-point throughput. In the standard PyTorch compilation (i.e., TorchInductor) path, model weights are allocated without considering the Non-Uniform Memory Access (NUMA) topology: specifically, the affinity between memory banks and compute cores is disregarded. This causes a substantial fraction of weight accesses to traverse the inter-socket interconnect, severely degrading the effective memory bandwidth available to each socket. We address this bottleneck through a compiler-level solution that makes TorchInductor NUMA-aware. Treating each NUMA socket as an independent tensor-parallel partition, we introduce NUMA-aware Tensor Parallelism (NUMA-TP). This approach transparently shards weights across sockets and schedules compute kernels such that thread pools and memory allocations remain strictly local to their respective sockets using CPU affinity. We evaluate the approach on GPT-2 (117M, 345M, 762M) and BERT (Small, Large), which exercise standard multi-head attention and MLP, as well as Gemma 3 270M, which combines Multi-Query Attention with a GeGLU-gated MLP. By strictly enforcing data locality, our approach successfully mitigates cross-socket traffic, achieving prefill speedups of up to 2.63x on a dual-socket Haswell platform, up to 1.87x on a dual-socket Cascade Lake platform, and up to 2.27x on a four-socket Haswell-EX platform.

0.37