CS Paper Radar

Hamiltonian Two-Way Coupling of Nonlinear Waves and 3D Flows

Sinan Wang, Ruicheng Wang, Taiyuan Zhang, Fan Feng, Jinjin He, Yuchen Sun, Zhiqi Li, Bo Zhu

cs.GR math.NAphysics.flu-dyn ·submitted 2026-08-25 22:43 UTC · v1
top venue

Abstract

Simulating large-scale free-surface water by coupling a localized 3D fluid solver to a cheaper 2D surface model has long faced a mismatch in wave dynamics: efficient 2D wave models used in graphics are typically either linear or non-dispersive. These models are fast, simple, and accurate for calm, small-amplitude seas, but coupling them with strongly nonlinear 3D solvers produces visible reflections and artifacts at the 2D--3D interface. We address this problem by introducing a nonlinear and dispersive 2D wave model based on the canonical Zakharov formulation. Its Hamiltonian structure, in which the surface elevation and surface potential form a canonical pair ($η$, $ψ$) governed by the wave energy, enables a canonically consistent two-way coupling scheme, allowing information to pass smoothly across the 2D--3D interface. Our 2D solver reduces mean wave-height error by 1.7--5$\times$ over SWE, BEM, and Airy baselines while running more than $10^3\times$ faster than BEM; it achieves greater nonlinear accuracy and coupling fidelity than SWE and Airy, with minor losses in speed and stability. Coupling it with a 3D Navier--Stokes solver yields a full system that suppresses visible seam artifacts across a range of experiments, including dispersion-matching and Kelvin-wake tests, and runs over 4$\times$ faster than a pure GPU NB-FLIP simulation on the same domain.

Comment
To appear in ACM Transactions on Graphics (SIGGRAPH Asia 2026)
DOI
10.1145/3842540

Closest papers

Nearest neighbours by meaning across the whole index.

Modeling the Hydrodynamics in the Oslofjord using an Advanced Circulation Model

cs.CE ·2026-08-17 ·Matthew Scarborough, Kai Håkon Christensen, Albert Cerrone, Nils Melsom Kristensen, Eirik Valseth
published similarity 0.56
Abstract

This study introduces a new unstructured computational mesh for hydrodynamic simulations of the Oslofjord. The mesh was created with global bathymetry and shoreline data, using OceanMesh2D. It contains 70,410 nodes, with a resolution at the coastline of 50 meters. We use the new mesh to create an advanced circulation model of the fjord. The model is run for four time periods with different characteristics, and validated against the current state of the art and elevation gauges in the fjord. Initial analyses show that the model effectively propagates tides through the narrow channels of the fjord, while requiring minimal computation time. Three different combinations of tidal constituents are used to force the model, and we analyze the cost and benefits of using additional constituents. In order to assess the model in a realistic scenario, the water surface elevation output from a coarse global model is used to force the model an extreme weather event. The results demonstrate the mesh's ability to reproduce high-resolution total water levels in the fjord, with a maximum root mean square error of just over 10 centimeters.

0.46

Geometry beneath the Waves: Dense Priors for Sparse-View Underwater 3D Gaussian Splatting

cs.CV ·2026-09-16 ·Harvey Caldeira, Haoran Wang, Guoxi Huang, Shaoyu Cai, Rachel Fu +1 more
published similarity 0.54
Abstract · Accepted to SIGGRAPH Asia Poster

Underwater 3D reconstruction remains challenging under sparse views, where scattering, absorption, and suspended particles degrade feature correspondences and geometric estimation. Although feed-forward geometry foundation models offer an alternative to conventional Structure-from-Motion, their direct application underwater produces noisy and fragmented geometry that limits subsequent 3D Gaussian Splatting (3DGS). We propose a sparse-view underwater reconstruction framework that adapts feed-forward geometry to underwater degradation and exploits its dense geometric priors for view synthesis. First, we adapt VGGT using LoRA and teacher--student distillation, training on synthetically degraded underwater images while preserving clean geometric supervision. This improves robustness to underwater appearance distortions without modifying the pretrained prediction heads. Second, the predicted dense geometry initialises an intermediate 3DGS representation that generates geometry-guided pseudo-views, increasing view overlap and strengthening feature tracks for subsequent RUSplatting optimisation. Experiments on SeaThru-NeRF and Submerged3D demonstrate improved reconstruction quality under sparse-view conditions. On SeaThru-NeRF, our method improves RUSplatting from 24.37 to 27.11 dB PSNR and increases SSIM from 0.7611 to 0.8634, while achieving the best average PSNR and LPIPS on Submerged3D. These results demonstrate the potential of domain-adapted geometric priors for robust sparse-view underwater 3D reconstruction.

0.29

Wave Physics as Representation: Tensor-Structured Neural Reconstruction for Ocean Acoustic Fields

cs.LG cs.AIcs.SDeess.AS ·2026-11-01 ·Yifan Sun, Panqi Chen, Weifeng Shi, Xiao Fu, Lei Cheng
similarity 0.54
Abstract

Reconstructing three-dimensional (3D) complex ocean acoustic fields from sparse measurements is challenging due to highly oscillatory wave structures and restricted sensing patterns/routes. Learning-based approaches fall into two categories. First, purely data-driven models can learn complex field patterns, but do not explicitly exploit wave physics that may enhance interpretability and reduce training costs. Second, physics-informed methods impose a specified physical equation as a reconstruction constraint, but often require environment-dependent parameters that are difficult to acquire. As a result, practical 3D acoustic field reconstruction that is both physically grounded and robust to uncertain environmental information remains largely unexplored. This work takes an alternative route: instead of solving a fully specified wave equation, it extracts a structured representation from wave physics and learns its components from data. From the Helmholtz equation and normal mode propagation, we derive a structured spatial-angular tensor representation, termed the S/c representation. Under a low-rank specialization, it takes the form of a rank-(L,L,1) block-term tensor decomposition, which connects structured sampling patterns/routes used in ocean sensing to sufficient conditions for field recovery. Building on this tensor representation, we propose TIDAL, a neural reconstructor that uses the S/c representation as an inductive bias for structured decoding and aligns information aggregation with the sampling geometry. The neural learner removes the need for known model parameters required by conventional physics-based recovery methods. Experiments across three structured sampling geometries show that TIDAL achieves the best reconstruction performance and fastest inference among baselines, with benefits from the physics-derived representation under limited data and model capacity.

0.22

NIRJALA: Draining the Sea out of Gaussian Splatting with Three-Path Optics and Reversible Physics

cs.CV cs.GR ·2026-11-17 ·Latchan Chhetri, Aman Kumar
theory similarity 0.53
Abstract · 21 pages, 11 figures

Water does not just tint an underwater photograph; it rewrites it. Each pixel mixes attenuated scene radiance, backscattered light, and scene light scattered forward on its way to the camera, and many combinations of scene and water explain the same pixels. Most Gaussian-splatting methods for underwater scenes model only the first two effects and remove the water by dividing by a transmission that decays exponentially with range, so their inversion gain grows without bound. We present NIRJALA (Sanskrit for "without water"), a 3D Gaussian Splatting framework that recovers water-free appearance and geometry together. TRIVENI, a three-path image formation model, adds a range-saturating forward-scattering term to direct transmission and backscatter; we prove that this keeps the inversion gain bounded at every range and bound how errors in the estimated backscatter and attenuation propagate into the recovered colours. PRATIBIMBA, a reversible physics anchor, ties a flexible neural water model to a ten-parameter physical model in both directions, so scene content cannot hide inside the water. SAMARASA collects the physics-informed objectives, including a range-binned colour prior. To score water removal against ground truth, we built SAJALA ("with water"), a 30-scene suite path-traced in Blender Cycles with water-free images, depth, and normals under controlled water colour and turbidity. On SAJALA, NIRJALA raises PSNR from 24.34 to 24.76 dB and lowers depth AbsRel from 0.109 to 0.091 against the strongest baseline; on real SeaThru-NeRF scenes it lowers LPIPS from 0.194 to 0.175 while rendering at 44 FPS. We also discuss where appearance metrics and geometry disagree underwater, and the limits of our evaluation.

0.15

Hydrograd v2.0: a differentiable two-dimensional shallow-water model on unstructured meshes with steady and unsteady adjoints for calibration and closure learning

cs.CE physics.flu-dynphysics.comp-ph ·2026-11-08 ·Xiaofeng Liu
theory similarity 0.53
Abstract

We present \textit{Hydrograd} v2.0, a significantly improved differentiable 2D shallow-water model written in Python with JAX. The model solves the shallow-water equations on the unstructured meshes of production models such as SRH-2D and HEC-RAS 2D with a well-balanced, positivity-preserving finite-volume scheme that handles wetting and drying. Gradients are tailored to the type of problem. Steady states are found by Newton's method with an exact sparse Jacobian obtained by graph colouring, and their gradients follow from the implicit function theorem at the cost of one linear solve. Unsteady flows are differentiated in reverse mode with checkpointing, or with an implicit time integrator whose gradient costs about two forward runs. All gradients agree with finite differences, to about $10^{-8}$ for steady flows. On the Savannah River case, the steady water surface differs from that of SRH-2D by 4.7\,mm (root mean square). Steady closure learning was 96 times faster than differentiating through time marching and reached a lower loss. An inflow hydrograph was inverted from stage records with a peak error of 2\,\%. In an unsteady roughness calibration, a singular value decomposition analysis of the sensitivity matrix showed that the stage records at the gauges are 70 to 160 times more sensitive to the total resistance of the reach than to its distribution among the roughness zones, which explains why only a gauge layout with gauges in every zone recovered all five roughness values. On one GPU, a mesh of 512,000 cells takes 7.6\,s for a forward run and 51\,s for a gradient.

0.23

A Task-Driven Framework for Multiscale Ocean Flow Dynamics through Integrated Simulation and Visualization

cs.HC ·2026-09-29 ·James Kress, Jithendra Nadimpalli, Shehzad Afzal, Sohaib Ghani, Ibrahim Hoteit
published similarity 0.53
Abstract · Accepted for publication in IEEE Transactions on Visualization and Computer Graphics (TVCG), IEEE VIS 2026

Internal waves are large-amplitude gravity waves that occur below the ocean surface and propagate along interfaces separating water layers of different densities. Understanding their generation, propagation, and evolution is essential, as these waves play a vital role in the ocean system by contributing to nutrient transport, biological productivity, and the transfer of energy across the ocean and continental shelf. Domain scientists use high-resolution numerical ocean models, to study internal-wave dynamics and associated coastal and nearshore processes on hybrid computational grids. These models generate large-scale, three-dimensional spatiotemporal datasets that capture internal wave flow behavior and interactions with multiple ocean variables. These datasets are generally analyzed using command-line tools with limited interactivity. To address these challenges, we in collaboration with domain scientists designed a task-driven visualization methodology for analyzing multiscale, multivariate flow data on hybrid grids. The framework incorporates a hybrid-grid volumetric reconstruction method, enabling continuous 3D analysis and a coordinated multi-view design that supports interactive exploration of complex flow structures. An insight-based evaluation with domain experts demonstrates that the system enables the identification of previously difficult-to-observe phenomena, including transverse wave propagation, energy transport pathways, and shoaling-driven mixing. Beyond the application domain, our contributions provide generalizable techniques and design principles for visual analysis of multiscale, multivariate flow data on irregular grids.

0.33

Beyond Shallow-Water Photorealism: Physically and Sensor-Grounded Simulation for Deep-Sea Robotics

cs.RO ·2026-08-27 ·Michele Grimaldi, Enrico Di Maria, Ignacio Carlucho, Yvan R. Petillot
similarity 0.52
Abstract

Many recent underwater simulators emphasize visual realism at the expense of physical fidelity, focusing on shallow-water effects with limited relevance in deep-water environments and high computational cost. In this work, we shift the focus toward deep-sea physical and sensor realism. We present a physics- and sensor-grounded extension of the Stonefish simulator that augments its hydrodynamic models with stochastic IMU and DVL drift, magnetometer disturbances, higher-order hydrodynamics, terramechanics, pressure-driven environmental variability, and physically based underwater optics. These additions are designed to better capture the forces and measurements shaping the behavior of deep-ocean AUVs, ROVs, landers, ASVs, and gliders, while remaining compatible with real-time simulation. This work advances underwater simulation toward more representative deep-sea operating conditions, which is particularly relevant for long-duration navigation and learning-based autonomy, where inaccurate sensor and environmental models introduce non-physical artifacts and overly optimistic performance. While challenges remain, including complex fluid-structure interactions and full environmental stochasticity, the proposed framework provides a practical foundation for navigation, perception, and autonomy research under deep-sea conditions.

0.22

Eulerian Motion Reconstruction for Water Scenery

cs.CV ·2026-09-29 ·Chuhan Chen, Yen-Chi Cheng, Ayush Saraf, Rajvi Shah, Tuotuo Li +6 more
similarity 0.50
Abstract · Project at https://sally-chen.github.io/eulersplats

Reconstructing and animating water scenery from nature produces compelling and immersive visual experiences. Previous work examined this task from the perspective of 2D video textures, with the goal of creating a looping video. In our work, we tackle the problem from a 3D perspective, creating a looping 4D dynamic reconstruction which can be interactively rendered from novel viewpoints from a single non-looping 2D source video. We represent motion as a 3D static \textit{Eulerian} motion field that advects canonical Gaussian splats that are cyclically reborn at fixed time periods, supervised using rendering losses. To model non-periodic and stochastic dynamics present in real-world scenes, we add a non-periodic, time-varying residual term to capture deviations from the static Eulerian motion field. We show quantitatively and qualitatively that our framework enables photorealistic animation of water scenes better than prior art.

0.33