CS Paper Radar

A Spatially-Aware Publish-Subscribe Middleware for IoT Applications

Philipp Ungrund, Kurt Rothermel, Sukanya Bhowmik

cs.DC ·submitted 2026-08-26 12:42 UTC · v1
unusual

Abstract

Spatial and proximity awareness are critical enablers for efficient communication in Cyber-Physical Systems (CPS) and the Internet of Things (IoT). However, the lack of suitable middleware support and standardized mechanisms for spatial awareness significantly limits the pervasiveness of location-dependent applications. In this paper, we present a novel approach that extends topic-based publish-subscribe, a dominant messaging model in this domain, with integrated spatial filtering and routing capabilities. Our approach leverages a highly flexible geometric method for describing spatial filters, enabling expressive and efficient spatial subscriptions. A geometric world model operates together with an enhanced topic-based broker to realize spatially constrained message dissemination. Importantly, this functionality is achieved using the MQTT5 protocol without violating the standard or requiring any modifications to existing client implementations. Experimental results based on both synthetic and real-world data demonstrate strong system efficiency, minimal computational overhead at the broker, and the practical feasibility of deploying the approach on existing IoT devices.

Closest papers

Nearest neighbours by meaning across the whole index.

A Connectionless Interaction Model for Network Spatial Proximity Services

cs.NI cs.HC ·2026-11-12 ·Artem Makarov, Dmitry Namiot
unusual similarity 0.51
Abstract

In this paper, we present a connectionless interaction model for network spatial proximity services. In the network spatial proximity model, the reception of an identification or discovery frame of a nearby wireless node confirms proximity and delivers content at the same time. Current Bluetooth and Wi-Fi specifications and mobile platforms extend this one-way announcement with responses, addressed messages, scheduled group exchange, and relaying, which still do not require a connection. The proposed model describes such interaction independently of a concrete wireless technology. It is based on the roles of nearby nodes, the proximity message as the unit of interaction, twelve pattern properties, and six interaction patterns: announcement, mutual announcement, query-response, addressed exchange, scheduled group exchange, and relay. An exit rule defines when a service should move to a connection-based channel. We analyze how the patterns can be implemented on Android and iOS smartphones through native mechanisms, substitution, composition, embedded bridges, or a step-up to a connection, and we propose a pattern selection method for developers. The model generalizes the earlier network spatial proximity model and refines the interaction primitives of the proximity core. It is illustrated by existing services and systems and supported by published measurements and first-order estimates.

0.24

Adaptive Guidance for 3GPP Ambient IoT Contention-Based Random Access

eess.SY ·2026-11-18 ·Amirhossein Azarbahram, David Ernesto Ruiz-Guirola, Onel L. A. López
similarity 0.50
Abstract

The emerging ambient Internet of Things (A-IoT) envisions connectivity among large populations of low-cost, energy-constrained devices. Supporting such connectivity requires efficient coordination of device access, particularly in reader-triggered operation, where multiple devices may respond to paging over limited shared radio resources. Indeed, simultaneous responses can lead to severe contention, delayed transmissions, and lost reports. This article explores how compact extensions to the current 3GPP Release-19 signaling framework could enable more selective and adaptive device access. The proposed approach allows readers to broadcast compact access guidance, which devices interpret according to their local conditions, while optional feedback supports continuous adaptation. Through a device-reporting case study, we demonstrate how such coordination can improve report delivery and timeliness under congested conditions, while highlighting the trade-offs across different network configurations. We also examine practical signaling considerations and discuss opportunities for more intelligent, adaptive, and resilient protocols.

0.32

Off-Tree Forwarding for Accelerating Broadcasts from Arbitrary Sources in Plumtree

cs.DC cs.NI ·2026-10-18 ·Ryohei Banno
similarity 0.50
Abstract

Overlay broadcast is fundamental to large-scale distributed systems, enabling messages to be disseminated to all participants. Plumtree is a well-established protocol that embeds a spanning tree in a gossip overlay: payloads are disseminated along tree links, while non-tree links support recovery and optimization. However, because the tree is constructed from the first broadcast, it is optimized for the initial source and can introduce long detours for broadcasts originating at other nodes, particularly leaf nodes. To address this limitation, we propose probabilistic exuding, an off-tree forwarding mechanism in which nodes near the source additionally forward payloads over their non-tree links with a specified probability. Exuded messages use a dedicated message type and do not participate in tree construction or repair, leaving the shared tree unchanged. Simulations on a 1000-node random regular overlay show that, for randomly selected sources and a representative parameter setting, the proposed method reduces the 95th-percentile delivery latency by approximately 40% relative to Plumtree. This closes approximately 92% of the latency gap between Plumtree and flooding while sending only about 58% as many payload messages as flooding. In contrast, Plumtree's own link optimization and shorter repair timeouts, which also exploit non-tree links, rewire the shared tree and increase latency as broadcast sources change; the latency of exuding is nearly unaffected.

0.21

Energy-Efficient Geographic Multicast Routing in Cognitive Wireless Sensor Networks

cs.NI ·2026-10-31 ·Farzan Heidari, Farzaneh Heidari
similarity 0.48
Abstract

Energy consumption is a major design concern in wireless sensor networks. Cognitive radio provides opportunistic access to licensed spectrum, while multicast routing allows several destinations to share forwarding paths. In this paper, we propose two geographic multicast routing protocols for cognitive wireless sensor networks, CCast and PCast. CCast combines multicast-tree construction with a latency-oriented spectrum-selection metric. PCast uses a normalized link-power cost to select routes and can avoid regions where primary users occupy lower-frequency bands. Both protocols use local neighbor information and destination coordinates, without requiring a complete network-topology map. Simulations compare the proposed protocols with geographic multicast routing (GMP) and multiple unicast routing. In simulations, CCast and PCast reduce energy consumption by 21\% and 26\% relative to GMP, at the cost of longer per-destination routes and higher delivery delay.

0.25

GeoRIS: Geofencing With Reconfigurable Intelligent Surfaces

cs.NI eess.SY ·2026-09-17 ·André Gomes, Arthur S. de Sena, Luiz A. DaSilva, Jacek Kibilda
similarity 0.47
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Geofencing refers to controlling the availability of wireless services within a network perimeter. In this paper, we study how RIS can be used to achieve geofencing in outdoor-to-indoor network scenarios. Particularly, we propose GeoRIS, a RIS controller that achieves geofencing by exploiting beam management procedures to control beam alignment in networks with steerable directional transmission links. GeoRIS does not require control over the outdoor base station and can work with or without channel state information. Through simulations based on 3GPP network models, we validate GeoRIS and demonstrate that it can "shield" an indoor network area (for example, by weakening communication links to the point where indoor users cannot meet the minimum requirements of 5G eMBB services). We also highlight an interesting insight: the same RIS can play a dual role, extending or inhibiting outdoor-to-indoor communication. In our simulations, we show that GeoRIS can easily change an indoor space from a "strongly covered area" (e.g., supports eMBB services in approx. 90% of network area) to an "out-of-service area" (e.g., inhibits eMBB services in approx. 90% of network area), or vice-versa, an attractive characteristic in scenarios in which dynamic indoor coverage control is needed.

0.26

BotScan: An adaptive active probing approach for identifying live IoT Botnet C2 servers at scale

cs.NI ·2026-08-24 ·S M Maksudul Alam, Vivek Jain, Zhaowei Tan, Srikanth V. Krishnamurthy, Michalis Faloutsos
similarity 0.46
Abstract

How can we actively search and identify live C2 servers of botnets at scale? The scalability requirement introduces the need to utilize resources efficiently in terms of computation and number of probing packets. We propose BotScan, an approach for actively probing a large IP space to find the highest possible number of live C2 servers. The novelty of BotScan revolves around two insights, which we establish empirically. First, contrary to popular PC-centric observations, many modern IoT botnet communication protocols use packets with minimal customization, which we observe across six major families. Second, C2 servers exhibit exploitable behavioral patterns, such as strong spatial locality. We substantiate the first insight by developing a streamlined approach where, given malware binaries, we measure and taxonomize the "replayability" of its C2 communication protocol. Then, we introduce a behavior-adaptive probing strategy that: (a) exploits the spatial locality of C2 servers using a two-level segment-centric approach, and (b) adapts dynamically to the success of its probes. We validate the effectiveness of our method using 1,842 recently collected IoT binaries, and we explore a target space of 2.5M IP addresses. First, a replay-based method is applicable for at least 72% of the malware binaries. Second, our method outperforms baseline methods by finding approximately double the live C2 servers for the same number of probes. We also conduct two case-studies where we identify 896 live servers including 112 unreported C2 servers.

0.22

Spatial Distribution of Mean PAoI in LEO Satellite-enabled IoT Networks

cs.IT ·2026-10-16 ·Badiaa Gabr, Mustafa A. Kishk
top venue similarity 0.46
Abstract

Non-terrestrial networks (NTNs), such as Low Earth Orbit (LEO) satellites, can provide consistent coverage for Internet of Things (IoT) nodes, particularly in rural areas where cellular coverage is lacking. These IoT nodes are used to monitor and record their surroundings, supporting various applications, including real-time applications. In such cases, transmission of the most up-to-date data is essential, making the Age of Information (AoI) a critical metric to consider. The AoI measures the elapsed time from the data generation at the source node to its reception at the destination. Moreover, the Peak AoI (PAoI), which denotes the maximum AoI in the system before an update is received, provides valuable insights into the network's performance. Therefore, this encourages us to focus on the PAoI within a large-scale and fully loaded IoT network, which is covered by LEOSATs. Using tools from stochastic geometry, this paper derives the spatial distribution of the uplink mean PAoI in a LEOSAT-enabled IoT network. To achieve that purpose, the meta distribution of the uplink conditional coverage probability is derived. Numerical results articulate how varying the number of deployed LEOSATs and their altitudes affects the coverage probability meta distribution and the spatial distribution of the mean PAoI. Additionally, by examining various scenarios with different numbers of LEOSATs and altitudes, we can derive valuable insights to determine the optimal beamwidth for LEOSATs tailored to each specific scenario to minimize the conditional mean PAoI.

0.37

Remote IoT Source Monitoring with Delayed Feedback

cs.IT cs.NI ·2026-09-20 ·Andrea Munari
similarity 0.45
Abstract · in Proc. 62nd Allerton Conference on Communication, Control, and Computing

Remote source monitoring is a key use case for Internet of things (IoT) applications, calling on efficient communications protocols to ensure timely data delivery. In this paper, we consider a practically inspired scenario in which an IoT device reports sensor readings to a gateway over a correlated, lossy channel, receiving feedback on the transmission outcome only after some delay. For this setting, we investigate practical threshold-based reporting strategies for monitoring a Markov process, and evaluate two approaches: a reactive strategy where the node awaits feedback after an update, and a proactive strategy that preemptively transmits a second update. Leveraging Markov renewal processes, we provide an exact performance analysis in terms of the mean squared error (MSE). Our study characterizes the fundamental trade-off between estimation error and communication rate, revealing that proactive transmissions significantly improve MSE even under strict IoT rate constraints.

0.13