CS Paper Radar

Giving Mechanical Engineers Intelligent Tools: A Project-Based AI Education Curriculum in Thermal Engineering

Changgen Li, Han Hu, Christy Dunlap, Nathaniel House, Jonathan Wai

cs.CY ·submitted 2026-08-26 17:26 UTC · v1
code/data

Abstract

Mechanical engineering (ME) requires a broad knowledge base across several disciplines. However, ME students often have insufficient training in electrical and computer engineering, complex challenges in traditional thermal system modeling, and endure heavy course loads with limited class hours. To help address these challenges, this paper proposes a new curriculum that integrates artificial intelligence (AI) into ME at the University of Arkansas (UARK), with a particular emphasis on thermal problems and their interplay with electrical and computer engineering. The curriculum has introductory, application, and advanced levels, covering core and optional AI projects. Key goals are to enhance students' understanding of AI models, ability to tackle engineering tasks, and teach multidisciplinary communication skills. This curriculum offers educators and researchers valuable insights into courses that can enhance students' practical skills and creativity. This curriculum, including the syllabus, data, and codes, is available to the public in open-access repositories.

Comment
This work has been submitted to the IEEE Transactions on Education for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Artificial Intelligence in Mechanical Engineering: Foundations, Opportunities, Challenges, and Responsibilities

cs.AI cs.CEcs.LGstat.AP ·2026-10-22 ·A. Cunha, C. Nataraj, L. M. Lorenzo, H. Panetto, A. Scotti +1 more
published similarity 0.66
Abstract

Artificial intelligence (AI) is reshaping mechanical engineering (ME), from modeling, simulation, and optimization to diagnostics, design, and technical communication. Drawing on a round-table at the 28th ABCM International Congress on Mechanical Engineering (COBEM 2025), this article presents a structured perspective for the Brazilian and international ME communities. Rather than an exhaustive survey, it examines how AI can enhance engineering practice without compromising scientific rigor. We distinguish statistical learning from human cognition and discuss the capabilities, limitations, and emerging agentic forms of AI. We then consider industrial adoption, workforce changes, and AI-assisted scientific discovery, alongside the energy and infrastructure demands of AI computation and their implications for sustainability and thermal management. The discussion emphasizes the integration of physical knowledge, structured reasoning, and domain expertise into AI systems, particularly in safety-relevant applications. Topics include physics-informed and hybrid learning, physically constrained modeling, validation, uncertainty quantification, and certification. We also examine educational, epistemological, and ethical challenges, including curriculum reform, human-agent collaboration, professional accountability, and the preservation of engineering knowledge. We conclude with principles for responsible AI adoption in ME: physical consistency, rigorous validation, explicit treatment of uncertainty, energy sustainability, human oversight, and ethical responsibility. AI should complement, not replace, engineering judgment.

0.35

LearnAI: Just-in-Time AI Co-Creation Across Disciplines at a University

cs.CY cs.HC ·2026-08-19 ·Weihao Qu, Ling Zheng, Chris Buzaid, Daniel Crawford
publishedhot direction similarity 0.59
Abstract

As generative AI reshapes professional and educational practice, institutions face a challenge: how to support diverse learners, from non-coders to advanced students, in building confidence and practice with AI-supported problem solving. Most institutional responses bifurcate into conceptual workshops for general audiences or technical courses for computer science majors, leaving few spaces where mixed-ability learners can engage common AI tasks at levels matched to their prior experience. This experience report presents the LearnAI Framework, a two-layer model for just-in-time AI co-creation piloted at a comprehensive teaching university. The Wide-Exposure Layer embeds short presentations in existing courses to build AI awareness at scale, reaching students and faculty across 18 courses in five disciplines. The Customized Co-Creation Layer provides opt-in, one-on-one sessions where clients work with trained undergraduate tutors through a 5-Stage Pedagogical Script: Problem Framing, Tool-Task Mapping, Iterative Co-Prompting, Deployment and Verification, and Ethical Reflection. Over two semesters, 35 clients co-created 36 portfolio websites and over 20 deployed web applications. Interviews with five clients and two tutors suggest a recurring change in how clients described AI use, shifting from treating AI as a passive answer machine to engaging it as a collaborative tool under human direction. A small paired pre/post AI readiness dataset (N = 7) provides preliminary descriptive context, and tutor accounts document how the pedagogical script was enacted and adapted across client types. We report on boundary cases including clients who felt overwhelmed and respondents who deliberately rejected AI use. This paper contributes a practical, adoptable framework with initial evidence from a single institution.

0.40

Beyond Simple Input-Output Assessment Tasks: Leveraging Automated Programming Assessment for Non-Trivial Courses

cs.AI ·2026-09-24 ·Artur Jordao
similarity 0.59
Abstract

The public visibility of Artificial Intelligence (AI) is growing rapidly, driven by the positive impact of its applications across diverse fields of knowledge. In this new chapter, courses that cover the foundations of AI and machine learning become essential for understanding their role and potential in contemporary society. Therefore, understanding fundamental concepts and elementary algorithms through the close integration of theory with practice is essential in AI courses. In this essay, we report our experience designing machine learning exercises for automated assessment tools in programming. It is worth mentioning that we are not developing a novel form of automated grading system. Instead, we propose a perspective that frames machine learning problems as input-output assessment tasks. From this perspective, each exercise admits a unique and deterministic answer and enables automated programming assessment tools (e.g., VPL for Moodle, Codeforces, and MOJ) to effectively support AI education. We believe this essay can encourage instructors to foster educational innovation by adopting more dynamic and interactive approaches to AI courses that integrate theory and practice. Importantly, this essay does not introduce an innovation in the use of AI for education; rather, it introduces an innovative approach to improving the learning of AI, particularly, machine learning.

0.22

Educating future engineers about LLMs: A scalable workshop

cs.HC cs.CYcs.RO ·2026-10-04 ·R. Zhang, J. C. F. de Winter, T. Dicke, D. Dodou, Y. B. Eisma
code/data similarity 0.56
Abstract

As large language models (LLMs) are increasingly integrated into engineering workflows, students require hands-on experience to learn how to collaborate with them critically. This paper presents a scalable gamified workshop designed for engineering Master's students to practice human-AI collaboration in navigation planning. Using a mobile web interface across 10 workshop sessions, a total of 226 students wrote prompts for a non-reasoning and a reasoning LLM to solve grid-based navigation tasks of increasing complexity. The system returned robot-executable plans, trajectory visualizations, and automated scoring, culminating in a live demonstration on a Boston Dynamics Spot robot. In a post-workshop questionnaire, 81.5% reported substantial learning and 91.0% reported high engagement. Analysis of the submitted prompts revealed that students changed their strategies from step-by-step instructions for the non-reasoning LLM toward providing higher-level guidance for complex problem-solving tasks. We conclude that such interactive simulation-to-reality environments are viable for teaching the verification and collaboration skills necessary for responsible LLM use in engineering. Code is available at: https://github.com/renchizhhhh/LLM-robotics-workshop

0.38

Primer: An AI Framework for Instructor-Centered Educational Simulation Creation

cs.AI ·2026-11-12 ·Ethan Mollick, Lilach Mollick, Ben Przystanski, LJ Ciccarelli, Natalie Bach +1 more
code/data similarity 0.55
Abstract

Educational simulations are a well-established pedagogical technique that gives learners opportunities to apply knowledge, respond to challenges, and reflect on their performance. High-quality simulations, however, are difficult to build, requiring instructor input, scenario design, character development, scaffolding, technical implementation, and repeated revision. This paper presents Primer, an open-source, LLM-agnostic AI-supported system that helps educators create adaptive educational simulations. Educators contribute their knowledge of the subject, lesson, and students, while generative AI produces responsive variations of practice for students. Primer uses a multi-agent system centered around executing educator's instructional intent through the entire learning experience. We hope that by releasing Primer as an open-source system, including its prompts and GitHub repository, we provide a foundation for development and research on educator-in-the-loop AI authoring, multi-agent educational workflows, and simulation-based pedagogy. Further, by allowing the use of various AI models, including local and open source models, we provide the opportunity for implementation under varied governance regimes. Primer points toward a model of educational AI in which instructors can create locally grounded practice opportunities based on their own materials, goals, examples, and knowledge of students.

0.30

Judgment-Centred Software Engineering Education: A Post-Hype Review and Framework for AI-Augmented Learning

cs.SE cs.CY ·2026-09-24 ·Qusay H. Mahmoud
similarity 0.55
Abstract · 22 pages, 1 figure, 3 tables

Generative artificial intelligence has moved from a disruptive novelty to a recurring part of software-development and computing-education workflows, while software agents are beginning to act across repositories, command lines, browsers, tests, and other tools. The educational problem is no longer whether students should be allowed to generate code, but whether software-engineering (SE) programs can preserve and assess human understanding while preparing students to work responsibly with increasingly capable AI systems. This paper presents a structured integrative review of research and practice from 2023 through 23 September 2026, supplemented by established work on AI literacy, technical debt, and human-AI collaboration. The evidence supports a conditional conclusion: GenAI can improve access to explanations, feedback, practice, and short-term task completion, but learning outcomes depend on prior knowledge, scaffolding, verification, task design, and assessment. We examine student help-seeking and authorship, faculty assessment and policy demands, and the wider SE risks created when generated artifacts persist across repositories, teams, architectures, and deployed systems. We extend the concept of comprehension debt: the deferred learning and maintenance cost that arises when AI-assisted production outpaces a learner's or team's ability to explain, test, modify, and justify the resulting software. We then refine the AI-Augmented Software Engineering Education (AASEE) framework into five non-linear integration levels and four cross-cutting evidence obligations: explain, verify, modify, and account. The framework links delegation to evidence, governance, and recovery mechanisms appropriate to its consequences.

0.33

WIP: Exploring Student-Created AI Agents and Instructional Videos to Foster Engagement in Computing Education

cs.CY ·2026-11-17 ·Lucas G. Zangari, Olufisayo Omojokun, Pedro Guillermo Feijóo-García
published similarity 0.55
Abstract · This work was presented at 2025 ASEE/IEEE Frontiers in Education (FIE)

This work-in-progress (WIP) research-to-practice study examines the use of student-created artifacts to promote active learning in a large undergraduate Software Design and Engineering (SWE) course. Active learning strategies have been shown to significantly enhance student engagement, comprehension, and motivation, particularly in computing education. In this work, we explore the use of student-created artifacts to foster student engagement in higher-level Computer Science (CS) courses. Specifically, we examine the experiences of undergraduate and graduate CS students who participated in the creation of two types of artifacts: instructional video tutorials and conversational AI agents. The goal being to understand how designing these artifacts could support students in applying and learning course content. Students raised valuable insights regarding both experiences. Concerning the creation of instructional videos, they appreciated the interactivity brought through multimedia to their learning experiences, although some found the strategy to be time-consuming. Similarly, when designing conversational AI agents, students enjoyed the novelty and practical application of the task, while some encountered challenges related to the complexity of tools such as \textit{Google Dialogflow ES}. We report on the potential of student-created artifacts to foster deeper engagement with course material, encouraging both creativity and critical thinking in computing education.

0.13

PLE: Physical-Engineering's Last Exam

cs.AI ·2026-10-21 ·Rujun Han, Yufan Zhuang, Arijit Ray, Han Yu, Zhongying CuiZhu +8 more
benchmark similarity 0.54
Abstract

Frontier language models now score above 90% on popular knowledge benchmarks and are increasingly deployed as agents that carry out multi-hour professional work. Yet no existing benchmark tests whether they can perform the real-world, economically valuable work of a professional physical engineer, such as modelling physics and legal code requirements across a multi-format project corpus, optimising material and installation costs, and issuing 2D/3D engineering design packages that a licensed reviewer would sign off on. Existing engineering benchmarks focus on textbook question answering, isolated tool calls or self-contained toy design problems. As a result, most of these benchmarks are already saturated by leading agents and solving them is far away from delivering real engineering design. We introduce PLE, a benchmark of 85 long-horizon, agentic tasks in professional physical engineering consisting of electrical, civil, structural and mechanical engineering, where solving a task means completing a realistic, billable engineering deliverable. PLE combines two complementary curation paths. Expert-Authored tasks are created end to end by practising engineers from a professional data provider's expert pool. Co-Authored tasks start from problem statements written by practising engineers; an adversarial Creator-Solver agent pipeline constructs each task's realistic project environment, executable grader and reference deliverables before sending them to expert engineers for validation and difficulty intensification. We evaluate a variety of frontier LLMs under seven publicly available agent harnesses. Even the strongest configuration reaches a mean score of only 50.6%, while spending 27M tokens and 63 minutes per task on average, demonstrating the substantial gap between current agents and autonomous physical engineering design.

0.36