CS Paper Radar

Procedura: Agentic 3D Modeling with Procedural Control

Youtian Lin, Yikang Yang, Zhanpeng Hu, Mengqi Zhou, Feihu Zhang, Xun Cao, Jiaheng Liu, Yao Yao

cs.CV cs.GR ·submitted 2026-08-26 17:54 UTC · v1
benchmarkcode/datahighly cited

Abstract

Native 3D generators now recover impressive mesh geometry from a single image. However, a dense mesh stays soft where a machined object should be sharp, it carries no part decomposition, and it exposes no parameter a user could edit. To address this, we explore the paradigm of 3D shape as code, leveraging and scaling the coding ability of an LLM for 3D modeling. We introduce Procedura, a novel 3D modeling agent framework that writes an object as a procedural assembly, a parametric program whose named parts are joined by typed, machine-checkable mates. From a text prompt, the agent plans the object as an assembly graph and writes the program part by part, solving each placement from the mated frames rather than guessing it, and admitting a part only once compile, mate, and connectivity checks pass. A decoupled vision critic then refines the assembly one diagnosed fix at a time. Moreover, the same graph carries per-part materials and a simulator-validated articulation. We evaluate on P3D-Bench under its assembly judge, and with the same judge on MechBench-36, our hard-surface benchmark. On both, Procedura outperforms state-of-the-art native 3D generators and every prior 3D-code agent on judged quality, produces the sharpest edges of any method we evaluate, and is the only one whose output is an editable, part-structured program.

Comment
Project page: https://spatiaos.github.io/projects/procedura/

Closest papers

Nearest neighbours by meaning across the whole index.

EditHero: A Benchmark for Long-Horizon Part-Level 3D Editing and Vibe Modeling

cs.CV cs.AIcs.GR ·2026-10-01 ·Ruihan Yu, Yu-Ju Tsai, Muyao Niu, Runyi Li, Lian Fu +7 more
benchmarkcode/data similarity 0.74
Abstract · Project page: https://alaya-lab.github.io/EditHero/, Code: https://github.com/AlayaLab/EditHero

3D editing methods are usually tested on a single edit, yet an asset is built through a long sequence of revisions, each of which must implement the requested change while leaving everything else unchanged. We introduce EditHero, to our knowledge the first benchmark for long-horizon, part-level 3D editing, with natural-language instructions and target images for both geometry and texture. A deterministic assembly engine produces the exact target after every edit, and every sequence is reviewed by hand. We use EditHero to compare 2 opposite approaches to 3D editing. Non-agentic methods operate top down, regenerating the object from a learned 3D representation and inferring what to keep. In contrast, LLM/VLM agents operate bottom up, editing through code that inspects the mesh and rewrites only the parts required by instructions. The non-agentic methods often miss the requested change and disturb regions that should stay fixed. Most LLMs follow instructions more closely, and all of them preserve the unedited parts better, but each of their edits takes minutes. We will release the engine and the edit sequences to support research on reliable iterative 3D editing.

0.31

CADFather: Autonomous CAD Reconstruction through Coordinated Tool Use

cs.AI cs.LG ·2026-10-06 ·Gennadiy Savrasov, Maksim Elistratov, Nikita Gavrilov, Albert Garifullin, Oleg Pavlov +5 more
similarity 0.73
Abstract · 17 pages, 7 figures, 6 tables

Reconstructing an editable CAD model from a 3D shape remains a challenging engineering task. Existing methods can propose CAD operations, but no single source of proposals works equally well across different part geometries and stages of reconstruction. We introduce CADFather, an autonomous agentic system that coordinates complementary tools to recover parametric CAD programs from 3D meshes. A vision-language assistant inspects renders of the target and intermediate reconstructions, then decides which candidate CAD programs to extend, which tools to invoke, how many proposals to generate, and when to finish. Learned and algorithmic tools propose CAD operations, while numerical optimization refines the parameters of existing programs. Proposed or refined programs are executed and evaluated to provide feedback for subsequent decisions. The agent maintains alternative candidate programs for each target part and preserves the best valid result throughout reconstruction. CADFather uses pretrained generation and assistant models without additional training. We evaluate reconstruction quality and execution validity on the full DeepCAD, Fusion360, and MCB test sets, as well as on CADENA-Bench, CADBench, and BenchCAD. We additionally analyze computational cost and the trade-off between cost and reconstruction quality.

0.42

AgenticCADedit: A Stateful, Tool-Mediated Agentic Approach to Multimodal 3D CAD Editing

cs.CV cs.GR ·2026-08-28 ·Saptarshi Neil Sinha, Mika Silvan Goschke, Paul Julius Kühn, Arjan Kuijper, Michael Weinmann
similarity 0.72
Abstract

Computer-aided design is central to industrial manufacturing, and much of a designer's daily work consists of editing existing models from multimodal requests involving speech, sketches, and model interaction. Existing neural CAD approaches focus predominantly on unconditional or text-conditioned generation. The neuralCAD-Edit approach formalizes expert multimodal editing requests, but its iterative baseline refines a complete CAD program across attempts, executing each attempt from the original model in a stateless CAD environment. Every attempt must therefore reconstruct the entire edit from scratch, so partially correct progress is discarded rather than accumulated, and the model can neither inspect the geometry it has just produced nor selectively revert a single faulty operation. We present AgenticCADedit, which turns editing into a sequence of small, verifiable actions on a persistent CAD state instead of a single regenerated program. Rather than emitting one complete program, it applies incremental code steps that each commit to the session, inspects the resulting faces and edges, renders highlighted selections to verify that the intended region was addressed, and reverts individual operations when it was not. Subsequent actions therefore build on the geometry produced by earlier ones. Our approach improves on all metrics for all three evaluated LLMs (open-weight: qwen3.6-27b, gemma4-31b; proprietary: gpt-5.6-luna), with the largest gains for the weakest baseline model, qwen3.6-27b, whose validity rises from 51.0% to 94.8% and acceptance from 1.6% to 12.0%. A token-cost analysis with gpt-5.6-luna further shows $66.7$% fewer output tokens than neuralCAD-Edit, while $94.8$% of input tokens are served from the prompt cache.

0.16

AssemblyWorld: Rethinking 3D Assembly with General-Purpose Agents

cs.CV cs.RO ·2026-09-30 ·Jiahao Zhang, Yeying Fan, Moitreya Chatterjee, Suhas Lohit, Bernhard Egger +3 more
code/data similarity 0.72
Abstract · 24 pages, 11 figures. Project page: https://assemblyworld.github.io

The task of 3D assembly requires translating an understanding of parts and their relationships into precise spatial arrangements. Can pretrained general-purpose agents assemble objects through visual interaction without additional assembly-specific fine-tuning? To investigate this question, we introduce AssemblyWorld, an interactive 3D environment in which agents inspect rendered views and manipulate supplied rigid parts, guided by images or assembly manuals when available. Agents perceive part geometry through 2D views rather than direct access to mesh vertices or faces, while their resulting assemblies are evaluated geometrically. Building on this environment, we construct AssemblyWorldBench, comprising 100 assembly tasks across 80 objects spanning furniture, industrial assembly, and fracture reassembly. Evaluating eight agent systems reveals substantial differences in their capabilities. The strongest system achieves 80.9% part accuracy but 59.4% complete-assembly success. The evaluated open-source systems lag substantially behind their stronger closed-source peers in both execution reliability and assembly accuracy. Analyses of visual references, interaction trajectories, and failures show how agents revise assemblies while leaving residual positioning errors. AssemblyWorld provides a common setting for both assessing the capabilities of interactive assembly agents and characterizing the gap between approximate structure recovery and precise reconstruction.

0.28

SketchMate: Agentic Geometric Reasoning for Zero-Shot Precision Insertion

cs.RO ·2026-10-30 ·Jiaming Wang
similarity 0.71
Abstract · 25 pages, 6 figures

Inserting an unseen part requires sub-millimetre precision and the correct orientation of keyed features. Current zero-shot agentic manipulation methods built on vision-language models (VLMs) produce spatial outputs that are far too coarse for this. We propose to let a VLM build a sketch model of the task, i.e., a few geometric primitives and two mate frames, which a VLM agent measures with geometric tools in multi-view depth and which a standard planner and compliant controller execute. Because a sketch describes the parts independently of their placement, the robot needs to build it only once per task. A sketch memory stores each agent run and transfers the stored sketch to later placements by point-cloud registration, so that the VLM is called only for unfamiliar parts. After grasping the part, the robot inspects both mating faces at close range and corrects the sketch by shape matching. On 69 simulated insertion episodes, our method inserts 88% of the parts at the assembled pose in a strict kinematic test, while ReKep and MOKA with the same VLM insert none. On new placements of eight tasks, reusing one stored run inserts as many parts as calling the agent in each episode, and it produces the sketch in 3.4 s instead of about 90 s.

0.19

PhysAg3D: Bridging 3D Generative and Agentic Models for High-Fidelity and Physically-Interactive Assets

cs.CV ·2026-10-29 ·Bi'an Du, Fanpeng Meng, Jiemin Fang, Chen Yang, Pufan Li +3 more
code/data similarity 0.70
Abstract

Generating interactive 3D assets from a single image requires realistic appearance, fidelity to the depicted object, and plausible physical behavior. Yet detailed geometry alone does not determine how an object should move or deform. We introduce PhysAg3D, which couples 3D generative models with agentic reasoning and tool use. A vision-language agent first infers semantic parts, candidate interactions, and physical priors from the image; a 3D generator then produces a textured whole-object mesh from the same image. A hierarchical interaction representation links these revisable priors to mechanisms and the generated surfaces they control, organizing interaction construction and refinement. Guided by this representation and observations of the mesh, the agent uses geometric and physical tools to construct parts, joints, deformable regions, and surface bindings while retaining useful generated geometry and materials. Rendered interactions and execution measurements guide targeted revisions within a fixed budget. The framework accommodates both rigid articulation and compliant deformation. Quantitative and qualitative evaluations on real photographs and external benchmarks demonstrate detailed, image-aligned assets with plausible interactions. Ablations support bounded refinement and source-surface preservation. Project Page: supra-3d.github.io/PhysAg3D.

0.23

CADForge: Agentic Single-View CAD Reconstruction with Explicit Geometry Reasoning

cs.AI ·2026-10-03 ·Keyang Lu, Zhifei Yang, Tianao Dong, Mingzhe Xing, Zhen Xiao +1 more
similarity 0.69
Abstract

Reconstructing editable parametric CAD models from a single-view image is of great practical value for modern manufacturing, yet remains challenging due to incomplete geometric observations and complex inter-part relationships. To address it, we propose CADForge, an agentic framework that progressively converts a single image into CadQuery programs. CADForge decomposes an object into CAD-meaningful components and performs explicit geometric reasoning for each component, a process that first identifies CAD-relevant constraints and then translates them into precise modeling parameters through mathematical code. The inferred parameters then drive component-wise synthesis of executable CadQuery programs, with a review agent evaluating the resulting geometry and providing targeted feedback for iterative refinement. To further improve robustness and efficiency, CADForge incorporates a failure-guided toolkit construction mechanism to distill accumulated experience into tools, and maintains a compact parametric CAD memory for retrieving modeling context on demand. Experiments on diverse single- and multi-part objects show that CADForge consistently outperforms existing baselines in reconstruction fidelity and perceptual quality, demonstrating an effective approach to accurate single-view CAD reconstruction.

0.33

Parametric CAD Bench v3: Evaluating Agentic Parametric CAD Authoring from Text and Engineering Drawings

cs.AI cs.CVcs.GRcs.LG ·2026-11-02 ·Mei Chen, Yu Xia, Haipeng Mao
benchmarkcode/data similarity 0.69
Abstract · 31 pages, 12 figures, 11 tables. Benchmark: https://cadbench.ai/ ; tasks and leaderboard: https://hub.harborframework.com/datasets/gnucleus-…

Producing an executable CAD script is not sufficient to establish that an agent has satisfied an engineering design request. Evaluation must also consider the resulting geometry, specified dimensions, and native CAD modeling history. We present Parametric CAD Bench v3, a 100-task benchmark comprising 30 text-to-CAD creation tasks, 30 text-to-CAD create-and-edit tasks, and 40 tasks that reconstruct mechanical parts from engineering drawings. Agents operate in a pinned FreeCAD environment and submit native CAD artifacts to a separate programmatic verifier. The primary metric is mean continuous task reward, combining geometry similarity and specification consistency rather than binary task success. A September 24, 2026 snapshot covers 13 model-agent systems; Claude Code with Claude Opus 5.5 achieves the highest overall point estimate, 61.03%, and an image-to-CAD mean reward of 84.66%. These measurements describe complete systems, not isolated model capabilities. We release versioned tasks, evaluation configurations, and inspectable result artifacts.

0.31