CS Paper Radar

Joint Communication and Control Beamforming: A Closed-Loop Control Perspective

Hao Jiang, Chongjun Ouyang, Yuanwei Liu, Arumugam Nallanathan, Robert Schober

eess.SP ·submitted 2026-08-26 19:35 UTC · v1
benchmark

Abstract

A joint communication and control (JCC) framework is proposed, where a base station (BS) simultaneously serves multiple communication users (CUs) and controls a physical plant in a closed loop. In the downlink, BS-generated control inputs are transmitted to and recovered at the plant, with wireless actuation distortion incorporated into the plant-state evolution. In the uplink, the plant state is reported to the BS and tracked by a Kalman filter (KF) for subsequent control-input generation. To characterize long-term control performance under communication-control interference, finite- and infinite-horizon linear quadratic Gaussian (LQG) costs are derived, directly linking beamforming design to plant-state evolution. JCC beamforming problems are then formulated for vector- and scalar-valued control inputs to minimize the infinite-horizon LQG cost subject to per-user communication signal-to-interference-plus-noise ratio (SINR) requirements. For the vector case, a second-order cone programming (SOCP)-based successive convex approximation method is developed for the resulting nonconvex problem. For the scalar case, a closed-form infinite-horizon LQG cost is derived, and the communication-control Pareto boundary is optimally characterized by an SOCP-based bisection method. Its optimality follows from the strict monotonicity of the scalar control cost with respect to the control SINR. Numerical results show that the derived costs closely match Monte Carlo simulations, the KF accurately tracks the ground-truth plant-state trajectory, and the proposed methods consistently outperform the zero-forcing benchmark. This confirms the benefit of balancing communication-control interference, especially with limited spatial degrees of freedom (DoFs).

Comment
This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. The abstract has been slightly edited to satisfy the arXiv character limit

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Communication-Control Strategy Optimization with Partially Nested Information Structures: The Linear-Quadratic Case

eess.SY cs.MAmath.OC ·2026-08-13 ·Haoyi You, Kaiqing Zhang
published similarity 0.58
Abstract · Preliminary version accepted to IEEE CDC 2026

In this paper, we formalize a joint communication-control strategy optimization (JCCO) problem in multi-agent linear systems with quadratic costs, under the common-information-based (CIB) framework from decentralized stochastic control. For computational tractability, we focus on such JCCO problems with partially nested (PN) information structures (ISs). In particular, with a baseline communication protocol that leads to a PN IS, we establish a series of conditions under which the partial nestedness is preserved under the (additional) communication strategies to be optimized, while violating them may cause nonlinearity of the optimal strategies in general, with open-loop communication strategies. We then develop a dynamic-programming-based approach to compute the optimal control strategies of JCCO with open-loop communication strategies, which yields a set of closed-form Riccati Equations. As a byproduct of independent interest, such an approach also offers a way to solve decentralized linear-quadratic control with PN ISs and output feedback, under the CIB framework. Finally, we extend such an approach to JCCOs with closed-loop communication strategies, yielding a more tractable dynamic program than an infinite-dimensional CIB-belief-based one.

0.19

Joint Design of Communication and Control in Center-Fed Pinching-Antenna Systems

cs.IT ·2026-11-08 ·Xu Gan, Yuanwei Liu, Hyundong Shin
similarity 0.58
Abstract

An analytical and optimization framework for the joint design of communication and control (JDCC) in a center-fed pinching-antenna system (C-PASS) is proposed. Within this framework, the mathematical coupling between data throughput and closed-loop control cost is characterized for JDCC. The analysis captures the mutual interference between concurrently transmitted data and control streams during uplink state uploading and downlink command delivery. Based on this coupling, an achievable communication-control performance region is established for C-PASS. Accordingly, a throughput maximization problem is formulated to jointly optimize digital and pinching beamforming subject to control-cost constraints. To address this problem, an alternating optimization algorithm is developed based on constraint reformulation and resource decomposition. The proposed framework reveals how control requirements shape achievable data throughput, guiding the joint beamforming design. Numerical results demonstrate that 1) the proposed C-PASS design achieves 110.2\% higher frame-average throughput than conventional PASS, and 2) the proposed concurrent data-control transmission protocol increases frame-average throughput by up to 66.7\% over separated transmission.

0.26

Capacity Analysis and Joint Gaussian Beam Pattern Optimization for Positioning-Assisted Communications

cs.IT ·2026-09-23 ·Yuanbo Liu, Rui Wang, Han Zhang, Shuojin Huang, Zaichen Zhang +1 more
similarity 0.56
Abstract

Positioning-assisted beamforming is a novel enabling technology for massive multiple-input multiple-output in modern wireless communications, as it provides reliable beam steering without requiring explicit channel state information. However, the channel capacity analysis under positioning error remains mathematically intractable, which limits both performance characterization and beamforming design. In this work, we derive instantaneous and ergodic channel capacity approximations in closed forms for both two-dimensional and three-dimensional positioning-assisted beamforming systems. Based on the new expressions, we provide closed-form optimal joint Gaussian beam pattern that maximizes the asymptotic ergodic capacity. Numerical results verify the theoretical capacity expressions and the optimal beam pattern. The derived expressions enable efficient beam design to maximize channel capacity and provide a theoretical basis for positioning-assisted beamforming design.

0.22

Data-Driven Stochastic LQR Control with Probabilistic Guarantees and Uncertainty Refinement

eess.SY ·2026-11-03 ·Amir Modares, Themistoklis Charalambous, Hamidreza Modares
similarity 0.53
Abstract

This paper presents a probabilistic framework for the direct, data-driven synthesis of the stochastic linear- quadratic output-feedback control for linear systems sub- ject to process and measurement noise. Using delayed input-output measurements, we derive a lifted parameter- ization together with an equivalent lifted linear quadratic cost, enabling controller synthesis without explicitly identi- fying the lifted dynamics. Two complementary closed-loop formulations, based on trajectory and covariance represen- tations, are then developed, whose uncertainties depend only on the realized but unknown lifted noise. We char- acterize the relative performance of the two formulations in finite-data regimes. High-probability uncertainty bounds are developed for realized noises, leading to a convex optimization solution to the problem, whose feasibility cer- tifies probabilistic mean-square stability (p-MSS) and per- formance guarantees. To reduce conservatism, Gaussian zonotopes are used to refine uncertainty sets by elimi- nating noise realizations inconsistent with measured data, and a novel intersection rule enables the consistent fusion of data-driven and physics-informed information. These components are integrated into an adaptive framework that unifies indirect (identification-based) and direct (control- oriented) data-driven linear-quadratic output-feedback con- trol. Unlike existing direct data-driven LQR methods that verify stability a posteriori, our by-construction approach achieves robust stability alongside reduced conservatism and superior performance. Simulation results show that the proposed controller approaches the ideal optimal solution while outperforming existing data-driven methods under noisy measurements.

0.19

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.53
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

Fundamental Limits of Dynamic Tracking and Communication: A Stationary Policy Formulation

cs.IT ·2026-09-28 ·Mohammadreza Bakhshizadeh Mohajer, Luca Barletta, Alex Dytso, Giuseppe Caire
similarity 0.53
Abstract · 17 pages, 5 figures, submitted to IEEE Transactions on Information Theory

We study a dynamic integrated sensing-and-communication problem in which a multi-antenna transmitter communicates with a receiver while simultaneously tracking a moving target governed by a stable Gauss--Markov model. We formulate the sensing--communication trade-off as a rate--distortion problem, where the communication rate is defined through the Verdú--Han information spectrum and the sensing distortion is measured by the long-run minimum mean square tracking error in angle and distance. We construct a tractable outer region by lower bounding this distortion through the posterior Cramér--Rao bound (PCRB). The control problem is partially observed because the target state is not directly available to the transmitter. We therefore introduce a belief-augmented information state and show, under the stated regularity assumptions, that stationary randomized Markov policies suffice for the covariance-based scalarized problem used in the outer bound. We then derive, under the stated large-block conditions, a Gaussian covariance-control outer bound by showing that, in the large-block regime, the sensing belief transition becomes asymptotically covariance sufficient; consequently, Gaussian signaling with the same stationary covariance policy preserves the stationary PCRB asymptotically while maximizing the communication reward for each transmit covariance. Numerical experiments compare an extended Kalman filter-based achievable frontier with a PCRB-based Gaussian covariance-control outer frontier.

0.21

Square Root Gauss-Newton iLQR

cs.RO math.OC ·2026-09-17 ·Maximilian Haas-Heger, Jur van den Berg
similarity 0.53
Abstract · 16 pages, 2 figures, ISRR 2026

The iterative Linear Quadratic Regulator (iLQR) is a widely used algorithm for nonlinear trajectory optimization. At each iteration, it solves a local linear-quadratic approximation of the problem via dynamic programming, propagating a quadratic cost-to-go function. If the Hessian of the cost-to-go approximation is positive-semidefinite, one can derive a square root formulation of iLQR that propagates its Cholesky factor instead. This offers significant numerical advantages - much as square root Kalman filters improve upon their conventional counterparts - particularly when iLQR is used within an augmented Lagrangian framework for handling constraints, where large penalties degrade conditioning. Previous square root formulations of iLQR and related algorithms exist, but they are either numerically suboptimal, algorithmically complex, or both. In this paper, we show that the key to an effective square root formulation lies in the Gauss-Newton (weighted least-squares) structure of the cost function: this yields a positive semidefiniteness property that extends beyond the Hessian to the full augmented cost-to-go matrix, and enables a backward pass of remarkable simplicity in which each step reduces to a single QR-decomposition, from which the feedback gain and propagated Cholesky factor are extracted directly.

0.23

Stochastic Data-driven Predictive Control of Linear Systems with Sub-Gaussian Disturbances using Causal Predictors

eess.SY ·2026-09-22 ·Johannes Teutsch, Marion Leibold
published similarity 0.53
Abstract · This manuscript is a revised version of the article published in IFAC Journal of Systems and Control (2026), vol. 25, pp. 100399. It contain…

We present a stochastic data-driven predictive control (DPC) framework for discrete-time linear time-invariant systems subject to sub-Gaussian additive disturbances based solely on input--output data. In contrast to related methods that rely on exact disturbance data or at least sample generation for closed-loop guarantees, the proposed approach leverages a disturbance data estimate. By enforcing consistency of the disturbance data estimate with the available input--output data and system class, we first identify data-driven and provably causal subspace predictors for use in DPC. Then, we analyze statistical properties of the corresponding prediction error, yielding tightened constraints for the nominal predictions that guarantee satisfaction of chance constraints. The proposed DPC scheme comes with guarantees on recursive feasibility and conditional chance constraint satisfaction in closed-loop under standard assumptions. A numerical evaluation study demonstrates the performance of the proposed controller.

0.51