CS Paper Radar

Cross-Platform Benchmark of Neural 3D Reconstruction for Autonomous Laboratory Robots

Yongho Kim, Mengjiao Han, Victor Mateevitsi, Silvio Rizzi, Michael E. Papka, Nicola Ferrier

cs.RO ·submitted 2026-08-26 20:16 UTC · v1
benchmark

Abstract

Autonomous robots performing laboratory tasks depend on 3D reconstruction pipelines that can turn raw camera streams into actionable object representations within the latency budget of a physical control loop. Neural 3D reconstruction methods have demonstrated high-quality view synthesis, but their real-time viability across the compute platforms on which laboratory robots actually run remains poorly characterized. In this work, we present a systematic compute-platform benchmark of neural 3D reconstruction methods, evaluating NeRF and 3D Gaussian Splatting training and rendering on GPU-enabled computing devices ranging from single-board computers to server-class nodes, and place Meta's SAM3D single-image reconstruction on the same axes to quantify its latency and fidelity gap relative to per-scene optimization. Our results show that Gaussian Splatting yields higher rendering quality than NeRF at greater GPU cost, and that onboard compute is insufficient for full per-scene optimization at interactive rates. Our preliminary assessment on SAM3D indicates that it delivers plausible object geometry within seconds, but with detail mismatches that can compromise downstream manipulation. Together, these findings motivate tiered pipelines in which lightweight feed-forward reconstruction sustains the real-time perception-and-tracking loop for laboratory robots, while heavier neural reconstruction is scheduled selectively on suitable compute.

Comment
This manuscript is peer-reviewed from the committees in the workshop "VAxAutoSci: Visual Analytics in the Age of Autonomous Scientific Discovery" in conjunction with 2026 IEEE Visualization & Visual Analytics

Closest papers

Nearest neighbours by meaning across the whole index.

Gaussian Splatting for Real-Time Scene Reconstruction: Methods, Systems, and Trade-offs

cs.CV ·2026-10-13 ·Ashim Dahal, Rabab Abdelfattah, Nick Rahimi
publishedsurvey similarity 0.74
Abstract · Accepted version to Els Pattern Recognition

3D Gaussian Splatting (3DGS) allows for high-quality real-time novel-view synthesis. Since its inception in 2023, its explicit and highly configurable scene representation has been extended toward sparse-view generation, dynamic reconstruction, efficiency and compression, streaming, and simultaneous localization and mapping (SLAM). Although Gaussian Splatting can provide real-time rendering, rendering an existing representation is distinct from constructing, updating, or maintaining the scene itself. In this survey, we synthesize current literature, categorize them and provide a connection of current approaches and tools towards an end-to-end pipeline. Explicitly, we categorize GS scene reconstruction into five overlapping families: single-shot generation, dynamic representations, efficiency and compression, streaming and immersive systems, and Gaussian Splatting SLAM. We distinguish render-only throughput from task-specific scene generation, update, tracking, mapping, and optimization costs, and combine controlled sparse-view benchmarking with native evaluations to identify cross-family quality, latency, memory, and update-cost trade-offs.

0.24

LonGaussian: Tracking Foundation Priors for Long-Context Feedforward Gaussian Reconstruction

cs.CV ·2026-10-16 ·Zhoufeng Xie, Guanjun Wu, Shuai Zhang, Xinggang Wang, Wenyu Liu
similarity 0.72
Abstract

Reconstructing high-quality, renderable 3D scenes from long videos is essential for robotic perception and embodied intelligence. Many feed-forward Gaussian reconstruction methods rapidly predict 3D scenes from a small set of images, but extending them to longer sequences presents two bottlenecks: jointly processing all views increases GPU memory requirements, while accumulating pixel-aligned predictions redundantly represents the same surfaces and increases storage and rendering costs. We present LonGaussian, a streaming feed-forward framework that reconstructs compact, globally renderable Gaussian scenes from long image sequences with known intrinsics and unknown camera poses. Built on a pretrained streaming 3D reconstruction backbone, LonGaussian decodes long-context geometric features into dense Gaussians. Within each chunk, multi-frame point tracks link repeated observations of the same surface and guide a learned merger to consolidate the corresponding Gaussian predictions. Rendered-depth consistency filtering further suppresses Gaussians from other chunks that incorrectly occlude locally reconstructed surfaces. On DL3DV and RealEstate10K benchmarks, LonGaussian improves novel-view rendering quality while using substantially fewer Gaussians than the evaluated feed-forward baselines.

0.14

DensiTok: Making Feed-Forward 3D Gaussian Splatting See More Views Than It Is Given

cs.CV ·2026-10-06 ·Minhyeok Lee, Jungho Lee, Minseok Kang, Heeseung Choi, Ig-Jae Kim +1 more
similarity 0.72
Abstract

Feed-forward 3D Gaussian Splatting (3DGS) reconstructs a scene in a single forward pass, replacing per-scene optimization with a network trained across many scenes. Its quality, however, degrades sharply as the number of input images drops. The bottleneck is upstream of the reconstruction heads: from a few unposed views, the internal representation they read carries no evidence for unobserved regions, leaving holes, floaters, and blur. The common remedy supplies that evidence as pixels, synthesizing extra views with an image or video generator and re-encoding them, which is costly and not 3D-consistent by construction. We instead densify the evidence itself. We present DensiTok, a plug-in module for pretrained feed-forward 3DGS models that densifies their internal geometry tokens directly, making a frozen backbone behave as though it had observed many more views than it was given. DensiTok compresses those tokens into a compact latent space, completes the latents of the unobserved viewpoints in a single flow-matching step conditioned on camera geometry, and decodes them back into tokens that the original reconstruction heads. The same module design can be integrated into different pretrained predictors while keeping each backbone and its reconstruction heads frozen. Completion in a low-dimensional latent space requires no image synthesis or additional encoder passes. Across three pretrained backbones and two benchmarks, DensiTok consistently improves sparse-view reconstruction and recovers much of the gap to dense-view reconstruction.

0.17

YUBI-Real2Sim: 3DGS Scene Verification for Reliable Policy Evaluation

cs.RO cs.AI ·2026-10-13 ·Hiroki Nishizawa, Takehiko Ohkawa, Nicola Scianca, Tatsuya Matsushima, Shigeo Morishima +1 more
benchmarkcode/data similarity 0.72
Abstract · Under submission

Evaluating VLA policies on real robots is costly, time-consuming, and difficult to reproduce, making real-to-sim simulation essential for scalable evaluation. While 3D Gaussian Splatting (3DGS) enables rapid real-to-sim scene generation, the reconstruction quality required for reliable policy evaluation remains unquantified. In particular, policies relying on wrist-mounted fisheye cameras (e.g., YUBI handheld gripper data) are heavily exposed to visual artifacts (holes, floaters) in wide-angle views, directly degrading task performance. To address this, we present YUBI-Real2Sim, a unified framework for 3DGS-based scene reconstruction and real-to-sim policy evaluation under dual fisheye wrist views. We develop an integrated pipeline combining 200-degree fisheye camera capture, 3DGS training, 3D foundation models for object modeling, and MuJoCo-based physical simulation, reproducing the observed real-world policy ordering in eight of nine scene-task comparisons. Using this framework, we construct a benchmark across two bimanual robot platforms, three scenes, three tasks, and dual pi0.5-based policies. This systematically measures real-to-sim rank agreement and evaluates policy sensitivity against counterfactual 3DGS artifacts (ceiling holes, floaters, warping) and capture disturbances. We further analyze whether novel-view quality scores can indicate policy-ranking reliability under a scene-held-out evaluation protocol. The results show task-dependent performance and limitations of quality-based reliability prediction, highlighting the need to assess reconstruction quality when using Real2Sim for policy evaluation. These results do not yet establish a generally reliable scene-acceptance rule. Project Page: https://yubi-real2sim.airoa.io.

0.28

RDGSplat: Render-Dedicated Geometry for Novel View Synthesis

cs.CV ·2026-10-06 ·Zhijie Zheng, Xinhao Xiang, Jiawei Zhang
similarity 0.72
Abstract

Recent 3D foundation models extend to novel view synthesis by carrying a Gaussian head on the representation they already use for reconstruction. However, their rendering quality lags far behind their reconstruction accuracy, because the renderer reads a geometry and a representation that are both optimized for metric reconstruction. Prior methods alleviate this by updating the backbone weights, but they thereby sacrifice the metric predictions the model was built for. To this end, we propose RDGSplat, which decodes a geometry dedicated to rendering from a frozen 3D foundation model while keeping its metric predictions exact. In particular, we devise Render-Dedicated Geometry Decoding, which duplicates the pretrained decoders and optimizes the duplicates under photometric supervision alone. Then, a Target-Pose Conditioned Adapter is introduced to adapt the representation those decoders read towards rendering, conditioned on the predicted target pose. Extensive experiments show that RDGSplat improves novel view synthesis for three feed-forward models of two architectures on four benchmarks, with every pretrained weight frozen. On RE10K, it raises WM2.0 from 20.918 to 25.149dB by training 205.5M added parameters against a frozen 1.4B backbone, and leaves its predicted depth and pose unchanged.

0.17

Federated 3D Gaussian Splatting for Large-Scale Scene Reconstruction at Wireless Edge

cs.CV cs.DC ·2026-09-26 ·Guanlin Wu, Chao Hu, Pu Chen, Juyong Zhang, Han Hu +2 more
published similarity 0.71
Abstract · 16 pages, 10 figures, 6 tables. Accepted for publication

Three-dimensional (3D) Gaussian splatting (3D-GS) has emerged as a promising technique for large-scale scene reconstruction due to its high rendering efficiency and fidelity. However, the training of large-scale 3D-GS models at wireless edge faces various technical challenges including the limited communication, computation, and graphics processing unit (GPU) memory resources at edge devices, the structural inconsistency issue across local models hindering their effective aggregation, as well as privacy leakage risks associated with raw visual content and camera parameters. To address these challenges, this paper proposes a novel resource-efficient federated learning framework for efficiently training 3D-GS models of large scenes under severe resource constraints. First, we propose an on-device model lightweighting mechanism that adaptively selects and prunes Gaussian points to balance the rendering quality and training efficiency. In this mechanism, we quantitatively evaluate the importance of different Gaussian points at each device to facilitate the pruning, and use a novel importance-to-latency ratio criterion to determine the number of pruned Gaussian points under GPU memory and computation/communication latency constraints. Furthermore, we develop a 3D-GS model recovery mechanism that restores structural consistency across local 3D-GS models without accessing private camera parameters, enabling their effective aggregation towards a global model. Finally, extensive experiments show that our approach significantly accelerates convergence, maintains high rendering quality, and reduces training latency compared to state-of-the-art federated 3D-GS baselines.

0.27

VoxelTTO: Voxel-Aligned Feed-Forward 3D Gaussian Splatting with Test-Time Optimization

cs.CV ·2026-09-18 ·Yibin Zhao, Yihan Pan, Yangwen Li, Jun Nan, Jianjun Yi
similarity 0.71
Abstract

Recent feed-forward 3D Gaussian Splatting (3DGS) methods typically regress pixel-aligned Gaussian primitives, often causing excessive overlap and artifacts, while inaccuracies in predicted camera poses can lead to misalignment in novel-view synthesis (NVS). We present VoxelTTO, a feed-forward framework for reconstructing geometrically accurate 3DGS scenes from an arbitrary number of images and optional camera parameters. VoxelTTO aggregates dense image features into a global voxel representation and decodes Gaussians from voxel features, breaking the pixel-to-Gaussian correspondence. To exploit known camera parameters while keeping the pretrained visual foundation model (VFM) parameters frozen, we introduce test-time optimization (TTO) that adapts lightweight LoRA modules using pose supervision. We further replace vanilla 3DGS rasterization with stochastic solid volume rendering during training and inference, improving geometric fidelity. Training updates only the voxel-aligned Gaussian reconstruction modules, requiring 80 GPU hours. Experiments on Replica, Tanks and Temples, and DTU demonstrate improved RGB-D NVS and camera-pose estimation relative to prior methods.

0.19

PIVOT: A Multi-Trajectory Dataset and Testbed for Pose, Intrinsics, and Novel Viewpoint Evaluation in Real-World 3D Reconstruction

cs.CV cs.AI ·2026-08-26 ·Mary Raymond
benchmark similarity 0.70
Abstract

Neural radiance fields (NeRFs), 3D Gaussian Splatting (3DGS), and related novel-view synthesis methods are commonly evaluated under capture and reconstruction conditions cleaner than those encountered by robots, drones, and autonomous systems. Benchmarks often rely on reconstruction-friendly trajectories, optimized camera poses and intrinsics, and held-out views sampled from trajectories represented during training. These assumptions can obscure performance with measured poses, reusable camera calibration, and structurally different camera paths. We introduce PIVOT (Pose, Intrinsics and Viewpoint Oriented Testbed), a multi-trajectory dataset, processing pipeline, and evaluation framework for independently studying these factors. PIVOT captures each scene using diverse camera trajectories and retains, where available, both sensor-derived measured poses and COLMAP-optimized poses, together with calibrated and optimized camera intrinsics. It defines three benchmark families: (1) seen versus unseen trajectory novel-view generalization, (2) measured versus optimized pose sensitivity, and (3) calibrated versus optimized intrinsics sensitivity. We also introduce a directed pose-space Chamfer distance to quantify how well training poses cover an evaluation trajectory. PIVOT v1 contains five real-world scenes captured with a DJI Mini 4 Pro and provides an open processing and Nerfstudio-based evaluation toolchain. Benchmark results show a consistent quality gap between held-out views on represented trajectories and unseen trajectories, as well as substantial sensitivity to pose source and camera intrinsics.

0.06