CS Paper Radar

FedCMAPSS: A Benchmark for Federated Learning in Remaining Useful Life Estimation

Amelia Sorrenti, Matteo Pennisi, Concetto Spampinato, Simone Palazzo

cs.LG ·submitted 2026-08-26 22:18 UTC · v1
publishedbenchmarkcode/data

Abstract

Data-driven prognostics and health management has emerged as a key enabler for Industry 4.0, yet the development of robust remaining useful life (RUL) estimation models is often limited by the scarcity of run-to-failure data. While federated learning offers a promising paradigm to collaboratively train predictive models without sharing sensor data, research efforts have operated so far in the absence of a common evaluation framework. To address this gap, this paper introduces FedCMAPSS, a benchmark for federated RUL estimation based on the commonly-used NASA C-MAPSS dataset. We define a set of five standardized tasks designed to simulate real-world industrial challenges, ranging from ideal IID settings to extreme statistical heterogeneity, and conduct a systematic evaluation of state-of-the-art federated optimization algorithms across multiple neural architectures. By establishing reproducible baselines and making the source code and data splits publicly available, this work aims to provide a standard foundation for developing and comparing federated predictive maintenance solutions.

Comment
Accepted at the 21st IEEE Conference on Industrial Electronics and Applications (ICIEA 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Integrating Survival-Based Aging Models with Data-Driven RUL Prognostics

cs.LG ·2026-10-05 ·Abhishek Srinivasan, Juan Carlos Andresen, Sepideh Pashami, Anders Holst
published similarity 0.66
Abstract · 14 pages, 7 figures, 1 tables, conference proceeding

Predictive maintenance requires reliable remaining useful life (RUL) estimation. Existing methods mainly follow two paradigms: wear-based aging models that capture cumulative degradation and sensor-driven data models that reflect instantaneous health conditions, each providing only partial information. In this work, we propose a probabilistic fusion framework that integrates wear-based and sensor-based prognostic components through failure probability distributions. Based on explicit structural assumptions linking wear, latent health, sensor observations, and failure, we derive a principled combination rule that enables uncertainty-aware integration with adaptive weighting of the components. Experimentally, we assess this combination rule by learning the wear-based component using a parametric survival model and the sensor-based component using a 1D convolutional neural network (1D-CNN) with a post-hoc uncertainty model. Evaluation on multiple N-CMAPSS datasets demonstrates that the fused model improves point accuracy, preserves the C-index, and produces narrower yet well-calibrated prediction intervals compared to either component alone. The results highlight the complementary roles of wear-based survival model and sensor-based deep learning model, and show that their probabilistic integration provides a structured pathway toward more robust and consistent prognostics over the life-time.

0.35

Federated Learning for Distributed CNC Tool Wear Prediction

cs.LG cs.AI ·2026-08-11 ·Afsana Khan, Morris Stallmann, Marcin Pietrasik, Charalampos S. Kouzinopoulos, Anna Wilbik
similarity 0.64
Abstract

Tool wear prediction is an important task in CNC machining, where accurate monitoring of tool condition supports product quality and process reliability. Machine learning methods have shown potential for this task, but their use in industrial environments is limited by the distributed nature of machining data and by restrictions on data sharing between machines, sites, or organizations. Federated learning offers a suitable framework for this setting by enabling collaborative model training without transferring raw operational data. However, it is open if federated learning can lead to accuracy gains in CNC tool wear prediction that justify the increased complexity of such a system. In this experimental study, real tool trajectories are distributed across simulated clients to represent a federated learning scenario. The federated models are compared against centralized references and local client baselines. Results show that federated learning achieves performance close to centralized learning and improves significantly over local client models. These findings indicate that federated learning can support collaborative tool wear prediction in distributed CNC manufacturing environments and the increased complexity is justified.

0.04

IPM-FM: A Foundation Model with Consensus Feature Selection for Industrial Process Monitoring

cs.LG cs.AI ·2026-09-08 ·Liang Cao, Weide Liu, Yan Qin, Jun Cheng, Weisi Lin +1 more
similarity 0.63
Abstract

Industrial process monitoring is fundamental to the safety and economic performance of modern process plants. Current practice remains a one-task-one-model paradigm that is label-inefficient and prone to degradation under operating drift. Foundation models have reshaped language, vision, and generic time-series forecasting, but it has not been adapted to industrial process monitoring. This setting poses domain-specific challenges, including safety-critical decisions and asymmetric sampling between process variables and laboratory measurements. We propose the industrial process monitoring foundation model (IPM-FM). It first learns general-purpose representations from unlabeled industrial process data through self-supervised pretraining, then adapts to specific monitoring tasks using a small amount of task-labeled data, and finally produces calibrated predictions through an uncertainty-aware prediction head. IPM-FM integrates a self-supervised Informer backbone with a multi-criteria consensus feature selector, a recursive lag-feature regression head, and a calibrated Monte Carlo dropout uncertainty module. On a seven-year hydrotreater dataset for diesel flash-point soft sensing, IPM-FM attains an RMSE of 2.99, $R^2$ of 0.50, and 97\% coverage of its 95\% predictive interval, outperforming the strongest classical and from-scratch sequence baselines by 8.3\% and 14.6\% in RMSE respectively, supporting the viability of a unified pretraining--adaptation framework for industrial process monitoring.

0.29

Do Time-Series Foundation Models Pay Off for Industrial Monitoring? A Cost-Aware Empirical Study

cs.LG ·2026-08-24 ·Guan-Hua Wen, Kuan-Yu Chen
similarity 0.63
Abstract · Accepted for poster presentation at CIF26 (2026), Poster P01013. 7 pages, 2 figures

Industrial monitoring models must detect operationally relevant deviations while satisfying target-specific data, calibration, and resource constraints. Time-series foundation models (TSFMs) promise reusable representations and zero-shot forecasts, yet evidence for their deployment value remains mixed when task definitions are heterogeneous and lightweight baselines are competitive. This work presents a protocol-aware empirical assessment across three settings: a C-MAPSS degradation-risk proxy, normal-only training for anomalous-sound detection on MIMII, and BDG2 forecasting-residual diagnostics with synthetic target perturbations. We assess classical one-class methods, compact neural autoencoders, residual forecasters, MOMENT-small, Chronos-T5, and TimesFM 2.5 in terms of anomaly-ranking performance, risk-horizon sensitivity, residual forecasting and perturbation sensitivity, and local implementation cost. Across 100 C-MAPSS engines evaluated out of fold, TCN-AE reaches fold-weighted AUROC/AUPRC 0.9570/0.8960, compared with 0.7310/0.3080 for MOMENT reconstruction; paired engine-cluster bootstrap confidence intervals exclude zero for both differences. Across five matched MIMII pump evaluations, OCSVM also exceeds MOMENT reconstruction in AUROC and AUPRC. On a fixed 12-meter BDG2 panel, TimesFM 2.5 has the lowest aligned forecast error and the highest synthetic AUROC point estimate, although synthetic AUPRC is similar across TSFM and fitted residual models. Same-device measurements show that MOMENT incurs higher latency, peak allocated VRAM, and serialized state-dictionary size than TCN-AE. Under the evaluated frozen and zero-shot settings, TSFMs are task-dependent deployment options rather than default replacements for fitted lightweight models.

0.34

CoCoFL: Continual Computing for Federated Learning over Intermittent Satellite-Ground Links

cs.DC ·2026-09-05 ·Yun Shen, Kun Guo, Xi Yang, Yaoqi Liu, Yisheng Zhao +1 more
similarity 0.62
Abstract

Low earth orbit (LEO) satellite constellations enable geographically distributed ground devices to collaboratively train a global model via federated learning (FL) without sharing raw data, with applications in environmental monitoring and disaster prediction. However, in satellite-assisted FL scenarios, intermittent satellite-ground links allow only a subset of devices to participate in global aggregation within each visibility window, leaving unscheduled devices idle and their local computational and data resources underutilized. Under partial device participation, data heterogeneity among devices may bias the global model toward certain devices, thereby deteriorating learning performance. In this regard, we propose a continual computing based federated learning framework, referred to as CoCoFL, in which scheduled devices participate in the global model aggregation, while unscheduled devices continue updating their local models taking into account model staleness. Guided by the convergence analysis of CoCoFL and subject to visible-window-related time constraints, we jointly optimize the device scheduling and the number of local epochs for scheduled and unscheduled devices. Experimental results demonstrate that CoCoFL achieves faster convergence, lower training loss, and higher test accuracy compared with baselines.

0.07

Benchmarking Hybrid Deep Learning Architectures for Predictive Maintenance in Industry 4.0

cs.LG ·2026-09-18 ·Zhengyang, Gu, Joseph E. Hernandez, Thomas Cook, John Burtenshaw +2 more
published similarity 0.62
Abstract · Published in: 2026 IEEE International Conference on AI and Data Analytics (ICAD)

Predictive maintenance in Industry 4.0 refers to using data from sensors, machines, and production systems to estimate when equipment is likely to fail, so maintenance can be planned before a breakdown occurs [1]. However, a model that predicts maintenance may work perfectly in the lab but fail unexpectedly when applied to real factory data [2]. To solve this "reliability" gap, we evaluated six deep learning architectures across more than 700 experimental runs. We focused on the two dominant approaches in the field: Recurrent Neural Networks (RNNs), which process data step-by-step, like reading a sentence [3], and Transformers, a recent dominant approach, which look at the entire sequence at once to spot important connections [4]. We examined whether Transformers still outperform recurrent neural networks (RNNs) when the data includes noise [5]. We found that while Transformers excelled at tracking stable, slow-moving processes, they tend to overreact to chaotic data, mistakenly taking sensor noise for meaningful signals [6]. We also found that the hybrid method that combines a Long Short-Term Memory (LSTM) layer with a Transformer layer is more resilient to noisy data from factory shops [7]. Functioning as a noise filter, the LSTM smooths out data volatility, allowing the Transformer to focus on the bigger picture without being distracted [8]. The hybrid model did not just improve accuracy; it proved to be significantly more consistent than complex models, delivering reliable predictions regardless of how chaotic the underlying system became.

0.58

XAI-Driven Confidence Estimation for OOD-Resilient Runtime Prediction

cs.LG cs.AI ·2026-11-09 ·Mahmoud Sanad, Mohammed Bakr Sikal, Osama Abboud, Heba Khdr, Jörg Henkel
benchmark similarity 0.61
Abstract

Machine learning-based resource management (RM) models degrade under out-of-distribution (OOD) inputs at runtime, yet existing approaches in the literature rely on a single global error margin that is overly conservative and fails to distinguish reliablepredictions from catastrophic failures. We propose Lightweight Runtime EXplainability (LEX), the first post-hoc XAI framework for input-specific runtime confidence estimation in ML-based RM. LEX clusters the embeddings of the training input space using a Gaussian Mixture Model and associates per-cluster prediction error bounds to input samples, enabling fine-grained runtime confidence signals without retraining. Evaluated on a state-of-the-art LSTM-based IPS forecasting model on Intel Alder Lake, across 34 benchmark applications, LEX achieves ~94% containment on unseen workloads and produces ~17% tighter per-input confidence bounds than global baselines. With its negligible runtime overhead, LEX advances the field by providing explainable and reliable input-specific confidence signals of ML predictions, thereby making ML-based resource management resilient to OOD at runtime.

0.19

Geometric Attractor Monitoring: A Robust and Frugal Framework for Multi-modal Industrial Robotic Cycles

cs.LG ·2026-08-31 ·Martin Bonsergent-Brachet, Jesse Read, Dany Abboud
published similarity 0.61
Abstract · 17 pages, 6 figures. Accepted at ECML PKDD 2026

Monitoring the health of heterogeneous industrial robot fleets is severely challenged by the multi-modal nature of their operational cycles and a persistent scarcity of run-to-failure data. Standard data-driven approaches, particularly deep learning architectures relying on sequential reconstruction, often struggle in this specific setting; they tend to over-smooth complex dynamics, masking early signs of degradation. To address these industrial constraints, we reframe the monitoring problem through a framework based on Phase Space Reconstruction (PSR). Instead of predicting temporal sequences, this framework transforms univariate sensor data into a geometric attractor, explicitly unfolding the mechanical states independently of their temporal occurrence. By evaluating various anomaly scoring techniques within this space, we demonstrate that discrete support estimation provides an effective and computationally frugal Health Indicator (HI). Validated on a real-world dataset of 21 heterogeneous robots over three years and a synthetic Langevin system, our approach outperforms standard deep learning baselines. We show that aligning the algorithmic bias with the geometric properties of the target system yields a pragmatic, traceable and easily deployable approach perfectly tailored to the realities of industrial constraints.

0.41