CS Paper Radar

Coordinated Motion Planning for Multi-Arm Systems via Iterative LQ Games

Junyoung Kim, Hanwen Ren, Lei Zhang, Ahmed H. Qureshi

cs.RO ·submitted 2026-08-27 21:33 UTC · v1

Abstract

Multi-agent motion planning for high-degree-of-freedom robotics manipulators in shared workspaces remains a fundamental yet challenging problem. Centralized planners often suffer from poor scalability, while decentralized approaches face robustness and safety concerns. Game-theoretic formulations offer a promising approach for modeling agent interactions, potentially overcoming these limitations. However, their application to articulated multi-arm systems remains limited. This paper presents an iterative Linear Quadratic (LQ) game framework for multi-manipulator motion planning, where each manipulator is modeled as an independent agent optimizing its own objective while interacting with other agents based on shared global states and collision constraints. The method solves a series of local LQ games by linearizing the dynamics and approximating the cost around a nominal trajectory, with Riccati backward recursions yielding feedback Nash strategies. To address the challenges of articulated systems, we incorporate differentiable penalties for self-collision and inter-arm collision into the optimization pipeline, enabling coordinated, collision-aware trajectory generation. Experiments demonstrate that our framework produces smooth, safe, and efficient trajectories in high-dimensional settings, outperforming traditional methods. This highlights the effectiveness of differential game formulations for multi-robot manipulation.

Closest papers

Nearest neighbours by meaning across the whole index.

Hybrid Optimization-Generative Motion Planning for Multiagent Affine Formations

cs.RO eess.SY ·2026-11-16 ·Zhonggang Li, Hongyu Zhou, Raj Thilak Rajan
similarity 0.71
Abstract

Formation maneuver control enables a multiagent system to cooperatively navigate through constrained environments in collective motion. While various formation controllers exist, they rely heavily on high-quality and dynamically feasible reference trajectories provided a priori, making formation motion planning (FMP) essential. To address the computational challenges for high-dimensional joint trajectories faced by conventional constrained optimization-based solutions, this paper introduces a hybrid optimization-generative framework with a focus on affine formations, which provide the necessary spatial flexibility. By formulating the planning task as a constrained Maximum-a-Posteriori estimation, we decouple multiagent objectives to leverage pre-trained single-agent diffusion priors for dynamic feasibility, obstacle avoidance, and smoothness. We then interleave the generative process with projected gradient descent (PGD) to strictly enforce affine geometric constraints with safety guarantees. Simulations demonstrate that our framework generates highly smooth, collision-free plans that are readily trackable by common distributed controllers and outperforms state-of-the-art planners in various metrics.

0.18

Asymptotically Optimal Multi-Robot Task and Motion Planning

cs.RO ·2026-09-16 ·Thi Thuy Ngan Duong, Cheuk Tung Shadow Yiu, Rahul Shome, Yoonchang Sung
similarity 0.71
Abstract

Multi-robot task and motion planning (MR-TAMP) requires jointly reasoning about discrete task decisions and continuous collision-free motions of multiple interacting robots. Although asymptotically optimal algorithms have been developed for task and motion planning, extending these guarantees to the multi-robot setting introduces an important challenge: different task transitions may involve different subsets of robots and therefore impose constraints of different dimensions on the composite configuration space. Consequently, an asymptotically optimal planner must not only optimize motion within each task mode, but also ensure sufficient exploration of the different types of transitions connecting them. We characterize this transition structure and establish sufficient conditions for global asymptotic optimality in MR-TAMP, requiring persistent coverage of relevant transitions and asymptotically improving motion planning within connected feasible regions. Based on these conditions, we develop an efficient asymptotically optimal MR-TAMP algorithm that combines evolving individual-robot roadmaps with implicit tensor-product search, avoiding explicit construction of the composite roadmap. The planner further employs conditional transition sampling, lazy collision checking, and mode- and solution-level guidance to improve finite-time planning efficiency while retaining persistent exploration. The resulting framework provides asymptotic optimality guarantees for multi-robot manipulation while efficiently exploiting the structure of individual-robot motion planning.

0.22

GAMBIT: Learning to Plan Continuous Multi-Robot Trajectories

cs.RO cs.AIcs.LGcs.MA ·2026-10-05 ·Rishabh Jain, Akmaral Moldagalieva, Lorenzo Magnino, Michael Amir, Keisuke Okumura +3 more
similarity 0.71
Abstract

GAMBIT is an opening chess move in which a player sacrifices a piece, typically a pawn, to gain a positional advantage later in the game. Analogously, in multi-robot coordination, individual robots may need to forgo locally reward-maximising behaviours to improve overall team performance. Such self-sacrificial behaviours are difficult to capture with manually designed heuristics, particularly in dense, interaction-rich environments. Focusing on double-integrator continuous dynamics, this work studies how to learn such coordinated heuristics over motion primitives for multi-robot trajectory execution. Our framework, GAMBIT, first learns coordinated motion-primitive selection through imitation learning and subsequently fine-tunes the policy through reinforcement learning. We further introduce a safeguarded rollout mechanism with backup trajectories that guarantees collision-free execution at all times. Experiments demonstrate that GAMBIT substantially outperforms a range of baselines, including centralised motion planners and decentralised reactive planners, while exhibiting strong scalability. In particular, it coordinates over a thousand robots with planning latency below a few hundred milliseconds in continuous domains.

0.24

Learning Waypoints and Passage Events for Decentralized Multi-Quadrotor Trajectory Planning

cs.RO eess.SY ·2026-10-18 ·Yunhan Shi, Jia Deng, Zehao Jia, Lin Cheng, Shengping Gong
similarity 0.70
Abstract · 9 pages, 7 figures, 3 tables

Multi-quadrotor passage planning requires coordinated spatial routes and passage times under vehicle dynamics and actuation constraints. Optimizing these decisions jointly couples temporal allocation, nonlinear motion, and inter-vehicle interactions, creating a computational challenge for local trajectory generation. We propose a learning-optimization framework that predicts spatial waypoints and ordered passage events for independently solved quadrotor planners. A common physical time grid aligns the vehicles, with intermediate events fixed by the networks and terminal progress optimized locally to permit different completion metrics. Differentiable sequential convex programming incorporates rigid-body dynamics and rotor-thrust bounds, allowing collision and completion gradients to train both networks through the generated trajectories. In a two-quadrotor evaluation across 24 layouts, the adapted policy passes physical feasibility and sampled separation checks in all five held-out layouts. Their mean completion metric decreases by 1.52% relative to the inherited policy. The median forward time is 21.01 ms on the held-out exchange layout with matching numerical trajectory references. These results demonstrate that learned spatial and event parameters can coordinate independent rigid-body planners while preserving local vehicle constraints in the evaluated scenarios.

0.13

Contact-based optimization for collision-free motion planning for a million robots

cs.RO eess.SY ·2026-10-30 ·Jan Kamm, Antonio Terpin, Raffaello D'Andrea
similarity 0.70
Abstract

Multi-agent robotic systems have attracted growing interest in recent years, with applications ranging from coordinated drone shows to autonomous operations on land, in the air, and on water. At the planning level, robot motion is often modeled using double-integrator dynamics (with low-level controllers handling the physical dynamics during execution) with a minimum-energy objective subject to collision-avoidance constraints and limits on position, velocity, and acceleration. The complexity of the problem resides in the constraints, which couple the trajectories and make the optimization problem nonconvex. Existing numerical approaches typically discretize and optimize entire trajectories, which becomes expensive for large fleets. We exploit the structure of optimal trajectories by organizing optimization around contacts, at which robots reach the minimum allowed separation. We formulate a coupled algebraic system in contact variables and reconstruct trajectories analytically between contacts. Our algorithm, sequential contact insertion (SCI), starts from unconstrained trajectories, inserts contacts at separation violations, and jointly adjusts their times and states. Numerical experiments demonstrate planning for one million robots in minutes and thousands of robots in fractions of a second. On problems feasible for a fixed-grid sequential convex programming baseline, SCI achieves median speedups of several orders of magnitude at matching solution accuracy.

0.51

Trajectory-Level Mode Guidance for Controllable Diffusion-Based Multi-Robot Motion Planning

cs.RO ·2026-09-29 ·Tianyou Yu, Shengze Cai, Chao Xu
similarity 0.69
Abstract

Motion planning often admits multiple feasible solutions, making multimodal generation valuable, particularly for flexible multi-robot coordination. Diffusion models naturally learn such trajectory distributions, yet incorporating coarse and partial trajectory priors without restricting generation remains challenging. Such priors indicate a desirable region of the solution space rather than a single solution, motivating conditioned generation that preserves multimodality. In this paper, we guide trajectory generation in the clean trajectory space and progressively incorporate trajectory priors with a timestep-dependent guidance strength. At each reverse diffusion step, the reconstructed clean trajectory provides a unified space for integrating planning costs and partial trajectory priors. Planning costs are incorporated through gradient-based refinement, while the partial prior is progressively injected at the corresponding noise levels with decreasing guidance strength. This guides generation toward the prior in early stages while gradually releasing the constraint to preserve the inherent multimodality of the diffusion model. The framework naturally extends to multi-robot planning by incorporating inter-robot collision costs. Experiments on single- and multi-robot planning tasks demonstrate controllable trajectory synthesis, diverse feasible solutions, and safe multi-agent coordination.

0.10

cuArms: GPU-Accelerated Conflict-Based Planning for Multi-Arm Manipulation

cs.RO cs.AIcs.MA ·2026-10-26 ·Philip Huang, Fabio Ramos, Jiaoyang Li, Caelan Garrett, Lars Johannsmeier
similarity 0.68
Abstract · 8 pages, 8 figures

Multi-arm manipulation has the potential to dramatically improve the throughput, efficiency, and dexterity of many manipulation tasks. Recent work coordinates multiple robot arms in a shared workcell by allocating and scheduling tasks for greater parallelism, jointly planning multi-arm motions, or directly learning multi-arm policies. So far, these approaches are either too slow, rely on domain-specific assumptions, or scale poorly with the number of robots and task horizon. Thus, we introduce cuArms, a conflict-based planner co-designed with GPU parallelism that efficiently decomposes the search space using reusable multi-modal roadmaps for individual robots and resolves conflicts and deadlocks through a lazy search. To jointly optimize task assignment, schedules, motions, and manipulation skills, we integrate a high-level scheduler that proposes candidate skeletons for cuArms to ground into coordinated manipulation plans. Experimental results show that our method establishes a new state of the art, with real-time initial solutions and anytime improvements in both motion quality and scheduling, without days of domain-specific training required by learning approaches. Videos of both simulated and real-world industrial tasks are available on https://cuarms.github.io/.

0.24

Graph-Sparse Distributed Predictive Control for Multi-Robot Motion Planning vianEdge-Consensus ADMM

cs.RO eess.SY ·2026-11-09 ·Josep Borras-Borras, Pablo Segovia, Carlos Ocampo-Martinez
similarity 0.68
Abstract

This paper presents a distributed model predictive control (MPC) architecture for collision-avoiding motion planning of planar robots with double-integrator dynamics. To reduce coordination demands, a time-varying predicted conflict graph selects relevant pairwise interactions. The associated collision-avoidance constraints are convexified once per MPC update using warm-start trajectories, yielding a fixed convex quadratic program (QP). The resulting QP is then decomposed using an edge-consensus formulation of the alternating direction method of multipliers (ADMM), enabling parallel robot-local optimization and independent closed-form projections onto separating half-spaces. Execution is selectively supervised by a centralized high-order control barrier function (HOCBF) QP when the distributed candidate does not satisfy the direct-execution conditions. Evaluated in C++ simulations involving 8, 16, and 32 robots, the proposed architecture achieves collision-free execution and substantially improves computational scalability while maintaining task-level performance comparable to a centralized complete-graph baseline.

0.20