CS Paper Radar

Should I Use This Synthetic Dataset for Training? How to Test with Minimal Real Data

Zhenyu Tao, Wei Xu, Xiaohu You, Petar Popovski, Osvaldo Simeone

cs.AI cs.ITmath.ST ·submitted 2026-08-28 07:05 UTC · v1

Abstract

Digital twins (DTs) and learned world models are increasingly used to generate synthetic data that augment the scarce real datasets available for training artificial intelligence (AI) models in engineering systems. Owing to the inevitable simulation-to-reality (sim-to-real) gap, however, augmentation may fail to improve the performance of the trained model on the real data distribution. This paper addresses the resulting decision problem: Given a real dataset, a candidate synthetic dataset, and a fixed learning algorithm, decide whether training on the augmented dataset improves the true, population-level performance, while consuming as few real test data points as possible. Two formulations are considered: a direct test on the mean loss difference between the two trained models, and a symmetry-based test on the paired loss difference, which trades a stronger null assumption for faster evidence accumulation. For the latter, we introduce the {adaptive e-process sign-flip test} (aeSFT), a doubly adaptive procedure that adapts both the number of Monte Carlo sign-flip rounds, and hence the computational cost, and the amount of real test data consumed. aeSFT yields anytime-valid Type-I error control, with no need to pre-specify the test-set size. Experiments on a synthetic-data classification task, a DT-aided wireless packet-scheduling task, and a radio-map prediction task show that aeSFT identifies useful synthetic data using substantially fewer real test samples than mean-based sequential testing, matches the power of fixed-sample sign-flip testing and the paired $t$-test, while keeping the false-positive rate below the target level.

Comment
Submitted to IEEE

Closest papers

Nearest neighbours by meaning across the whole index.

Generative Data Augmentation Without External Data: An Empirical and Theoretical Study on Deep Networks

cs.LG stat.ML ·2026-11-16 ·Daniel Kua, Yan Song
theory similarity 0.63
Abstract · 24 pages, 7 figures

Generative data augmentation adds samples from generative models to a classifier's training set. Many influential studies use generators pre-trained on large external datasets, and so mix the value of synthetic data with knowledge transferred through pretraining. We study the case without external data, where each generator learns only from the classifier's own training set, and ask when and why adding generated samples to that training set raises or lowers the classifier's test accuracy. We train classifiers with four backbones on six datasets, two of them medical, adding samples from four generators. We bound the excess risk of a classifier trained with synthetic data, that is, how far its population risk can lie above the minimum risk within its hypothesis class. The bound charges synthetic data for the total variation distance between the real and generated distributions and credits synthetic data for a larger training set. The gain from adding synthetic data, the fall in population risk, is at most the excess risk of the real-only classifier, which trains on the real images alone. Read through the bound, the experiments suggest that synthetic data help most when our classifiers detect only a small discrepancy between the generated and real data and the real-only classifier has room to improve, and that synthetic data help little or hurt when the detected discrepancy is large. Generators with a larger lower bound on the total variation distance, a bound that we estimate from our own classifiers, tend to help less on five of the six datasets, and on the CIFAR datasets the most accurate backbone gains the least. The bound gives these directions but not the size of the largest gains, most of which traditional augmentation also reaches at the same number of optimizer steps.

0.21

Statistical Analysis of Synthetic Data with Verification: A Linear Regression Framework

cs.LG stat.MLmath.ST ·2026-10-29 ·Heejune Sheen, Harrison H. Zhou
similarity 0.62
Abstract

Synthetic data are widely used for training modern AI systems. However, their statistical understanding remains limited. It is well recognized in statistics that repeated self-training on synthetic data can amplify errors inherited from pre-trained models, leading to model collapse. Verification plays a crucial role in selecting high-quality synthetic data to help prevent model collapse and improve model performance. We study verified self-training in a linear regression framework, where a pre-trained estimator generates synthetic data with injected generation noise and a verifier selects samples according to a verification threshold. Post-training on the accepted samples updates either all coordinates (full fine-tuning) or only an active subset (partial fine-tuning). Our analysis reveals three potentially counterintuitive effects. We establish that tighter verification does not always lead to lower prediction risk. We also find that a suitable level of injected generation noise can reduce prediction risk, while excessive noise can increase it. Moreover, full and partial fine-tuning can respond differently to the same verification rule, since pre-training error in the frozen coordinates affects both sample selection and post-training risk. We analyze these effects by deriving finite sample risk bounds for four separate regimes determined by the relative scales of the verification threshold, generation noise, and pre-training error. The bounds precisely characterize how verification affects prediction risk across these regimes. In particular, we quantify how the generation noise, the effective accepted sample size, and the covariance of the accepted covariates affect prediction risk. The analysis extends to iterative verified full fine-tuning, where sufficiently tight verification reduces the initial error contribution at a geometric rate.

0.12

Training-Aware Target Coverage for Synthetic Data Selection

cs.LG cs.AI ·2026-09-30 ·Yang Ba, Michelle V. Mancenido, Rong Pan
similarity 0.60
Abstract

Synthetic data are increasingly used to scale LLM training, yet more synthetic data do not necessarily produce better models. Useful synthetic data must add information relevant to the target task without introducing errors that offset their benefit, and the value of an example can change as the training set grows. We develop a linear theory that characterizes this tradeoff and determines where synthetic data are useful, how much should be added, and the marginal value of adding one example to an existing set. The analysis shows the conditions when input coverage alone is sufficient and when synthetic errors must also be considered. Guided by these results, we introduce \emph{Training-Aware Target Coverage} (TATC), a synthetic data selection method for LLM fine-tuning. TATC identifies candidates whose training effects are beneficial to the target task and selects among them to expand coverage of target-relevant directions not already represented by the available data. Experiments on text and image data verify the linear theory. With mathematical reasoning tasks, TATC selects synthetic solutions for fine-tuning Qwen2.5-Math-1.5B-Instruct and outperforms alternative synthetic-data selection methods on GSM8K across selection budgets. In summary, we provide a principled approach to synthetic data selection by quantifying and maximizing its value to the target task.

0.31

Sim+Real: Joint Simulation-Experiment Training Improves Balanced Prediction in Physical Systems

cs.LG ·2026-10-01 ·Mahindra Rautela, Alexander Scheinker, Ayan Biswas, Diane Oyen, Nathan DeBardeleben +1 more
code/data similarity 0.57
Abstract

Simulation and experimental measurements provide complementary data for learning spatiotemporal physical systems, but standard simulation-to-experiment fine-tuning optimizes only the experimental objective after transfer and can degrade simulation performance. We formulate simulation--experiment prediction as a multi-objective learning problem with domain-specific simulation and experimental risks. On four fluid systems from RealPDEBench and two model capacities, we compare Simulation only, Experiment only, Sim$\rightarrow$Exp, and Joint training, evaluating every final model on both held-out domains. Sim$\rightarrow$Exp tends to specialize more strongly to experimental data at the cost of simulation-domain forgetting. Joint training consistently achieves the best balanced performance over a broad range of simulation--experiment evaluation weightings, while substantially improving simulation retention over Sim$\rightarrow$Exp. Joint also better preserves simulation-only fields absent from experimental measurements. Project page: https://mahindrautela.github.io/morph.

0.64

When Does Training on Synthetic Data Provably Work?

cs.LG stat.ML ·2026-10-20 ·Leroy Odunlami, Tobias Riedlinger, Hanno Gottschalk
similarity 0.56
Abstract

High-quality training data are a major bottleneck in machine learning, motivating increasing use of artificially generated data. We study when a binary classifier trained on synthetic data transfers successfully to a real distribution, under a shared conditional label distribution. First, we derive finite-sample excess-error bounds when the real covariate distribution is absolutely continuous with respect to the synthetic distribution under a controlled density ratio. Second, we study the partially and fully singular case, where the real distribution has mass outside the synthetic one. If the hypothesis class is sufficiently expressive, synthetic risk alone cannot uniformly control real-world error: a classifier can be nearly optimal on synthetic data while approaching worst-case error on the uncovered real region, even when the distributions are arbitrarily close in Wasserstein distance. For function classes where hypotheses and the log-odds of the conditional label probability are Lipschitz, we recover a bound in terms of the probability that a real sample lies outside the reach of the synthetic data, restoring a transfer guarantee even in the fully singular case. Experiments confirm this in controlled low-dimensional settings and on 32,200 images generated as counterparts to real ImageNet images by four state-of-the-art generators: an adversarial classifier reaches 0.5% error on the synthetic domain but 99.25% error on the real domain, while ordinarily trained architectures show positively correlated synthetic and real test errors. Synthetic data should be budgeted at high sample counts and models validated on real data.

0.28

Adaptive Replay Refinement: Allocating Test-Time Compute Between Revision and Resampling

cs.CL cs.LG ·2026-10-20 ·Ahsan Bilal, Muhammad Ahmed Mohsin, Muhammad Umer, Ayesha Mohsin, Sarmad Bilal +1 more
code/data similarity 0.55
Abstract

Test-time scaling allocates additional inference compute to refining existing solutions or generating new ones. This raises a fundamental question: Should I keep improving this solution, or stop working on it and try a completely new solution? Existing methods make this decision using fixed refinement schedules, self-verification judgments, or learned controllers, which can waste compute or rely on signals that may be incorrect or require additional training. We introduce Adaptive Replay Refinement (ARR), a training-free method that detects when a stationary revision reaches a fixed point and reallocates the released compute to a new independent sample; replay decoding treats the current solution as a draft and verifies unchanged tokens in parallel, enabling efficient fixed-point detection. Across seven models from five families and seven benchmarks, ARR matches majority voting on three of five mathematical reasoning benchmarks at equal compute, while reducing critical-path serial passes by up to 2.4 times. On MATH500, ARR achieves 84.6% accuracy with only 41% of the serial passes required by majority voting. These results demonstrate that detecting refinement exhaustion enables adaptive reallocation from revision to independent sampling, improving inference efficiency while highlighting the limits of self-revision. Code is available at https://github.com/AhsanBilal7/adaptive_refine.

0.33

Learning with Synthetic Data via SGD in High-Dimensional Linear Regression

cs.AI stat.MLcs.LG ·2026-09-09 ·Jichu li, Difan Zou
similarity 0.55
Abstract

Synthetic data has become a promising way to scale model training beyond limited human-generated data but it may also induce strong model collapse (Dohmatob et al., 2024), where any fixed fraction of synthetic data prevents model performance from improving under data scaling, leaving a non-vanishing excess risk floor. In this paper, we study how synthetic data affects the generalization of one-pass SGD in high-dimensional linear regression with model shift. We establish finite-sample risk bounds for mixed and two-stage training, separating standard bias and variance from source-mismatch effects, namely fluctuation and persistent drift under mixing and filtered initialization bias under two-stage. These bounds reveal a sharp contrast: mixed training induces strong model collapse, while two-stage training avoids the floor by using synthetic data only in the first stage, showing that collapse is not inevitable under a simple data curriculum. Under a random sketch model, we further obtain scaling laws for both protocols, with tight results for mixed training in the optimization-saturated regime. These laws show that larger models may amplify synthetic-induced degradation under mixing, and quantify how high-quality synthetic pretraining may reduce bias in two-stage training. Finally, we establish an exact finite-sample necessary-and-sufficient condition for two-stage training to strictly outperform real-only training under the same real-data budget and identical real-stage updates. Overall, our results highlight that synthetic data is neither inherently harmful nor beneficial; its effect depends critically on both its quality and the training protocol used to incorporate it.

0.33

Forecasting from Counterfactual Simulator Rollouts: A Sim2Real Evaluation

cs.LG ·2026-10-02 ·Angel Wang, Dominique Perrault-Joncas, Alvaro Maggiar, Dean Foster, Carson Eisenach
similarity 0.55
Abstract · 15 pages, 3 figures, 9 tables

Deploying a new decision policy creates a cold-start problem for prediction models whose targets depend on the policy's actions: historical observations reflect earlier policies, while real observations under the new policy are not yet available. Simulation offers a way to address this gap by rolling out the target policy across counterfactual scenarios and using the resulting trajectories to learn how the system responds to those controls. The simulation-to-reality (Sim2Real) transfer of this simulator-trained model can then be backtested by evaluating it against real observations from past deployments. Using two real-world inventory-control deployments, we evaluate this process from three angles: simulator fidelity, zero-shot transfer to real behavior, and adaptation as real target-policy observations accumulate. The simulator-trained forecaster achieves lower point-estimate mean absolute percentage error (MAPE) than the same architecture trained on historical real data, reducing MAPE by 1.2-3.1 percentage points in Study 1 and 12.5-18.7 points in Study 2. After deployment, lightweight calibration using early real observations further reduces error by up to 2.5 percentage points. These results provide empirical evidence that simulator-generated counterfactual data can support cold-start forecasting under a new policy, and the resulting model can be further refined as real deployment data become available.

0.34