CS Paper Radar

A Method for Layer Bit-Width Allocation in LLM Quantization via Performance Maximization Under a Quality-Degradation Constraint

Artem Safronov

cs.LG cs.AI ·submitted 2026-08-28 07:13 UTC · v1

Abstract

This paper proposes a layer bit allocation method for Gemma-3-1B, formulating the problem as performance maximization (latency decrease) given a degradation budget constraint (allowable level of generation quality loss). This approach is different from time- and resource-consuming uniform layer quantization methods that are used in the literature (like GPTQ or AWQ) or allocation methods without proven performance-accelerating effect (like MixLLM or TorchAO). The layer sensitivity profile resulting from our prior work SA-PTQ is applied using the activation pass-through mode inside TensorRT-LLM. For each layer precision is determined individually in blocks, according to a grouping introduced in the prior step (5+5, 10+10, all26), differentiating the contribution of FFN, Attention, and lm_head to the overall speedup. The clock speed was measured for 13 W8A8 variants on an RTX 5090. We find that for FFN and lm_head the time cost of quantization/dequantization is compensated for by the use of integer arithmetic, while for short context lengths, the opposite holds true for Attention: an additional step of quantization slows execution down. We propose a manual implementation of SmoothQuant for TensorRT-LLM which was necessary due to export failures, unavailable for lm_head. The best solution found under joint consideration of all three criteria with minimal degradation was FFN 5+5 with lm_head, providing an 11.0% reduction in latency with negligible quality loss (98.90% Top-1 agreement, +0.85% perplexity degradation). With acceptable quality loss for FFN all26 + lm_head, a speedup up to 19.1% was found possible. We suggest further optimizations: fused attention kernels in INT8, KV-cache quantization, using FP8 instead of INT8 and partial Attention quantization analogous to FFN.

Comment
22 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

An Interleaved Parallel Dependent Quantization Hardware Architecture for H.266/VVC

cs.AR ·2026-10-07 ·Jun Zhang, Weizhi Bian, Hao Zhang
similarity 0.67
Abstract

While dependent quantization in H.266/VVC delivers a high compression ratio, its strong serial nature and high complexity result in poor real-time performance, making it difficult to deploy in practical scenarios. To improve the real-time performance of dependent quantization with minimal degradation to its compression performance, we propose a interleaved parallel dependent quantization hardware architecture with low BDBR loss, which achieves four-channel parallel dependent quantization by time-division multiplexing most combinational logic. This architecture adopts the proposed intra-CG context simplification scheme and the encoding scheme that skips decAbslevel during rate estimation. The proposed design incurs a BDBR loss of only 0.42% under the All Intra configuration and 0.38% under the Random Access configuration, respectively. Implemented in Verilog HDL, the dependent quantization hardware architecture achieves quantization speeds of 4K@33.2, 91.4, 331.2, and 454.1 fps at QP = 22, 27, 32, and 37, respectively, when implemented on the Xilinx XCZU19 FPGA. When implemented on ASIC using the TSMC 28nm process standard cell library, the corresponding quantization speeds reach 4K@84.0, 231.0, 837.0, and 1147.7 fps.

0.13

Q-PACE: Dynamic Precision Allocation for Quantization-Aware Training

cs.LG ·2026-10-06 ·Alexandra Volkova, Matin Ansaripour, Erik Schultheis, Christoph H. Lampert, Dan Alistarh
similarity 0.66
Abstract

Quantization-aware training (QAT) leverages lower-precision arithmetic to reduce the cost of LLM deployment, but aggressive quantization degrades final model performance. A common remedy is mixed-precision training, in which high precision is assigned to some of the layers to maintain performance while keeping the cost constrained. This approach then requires precision assignments for model layers during training. We provide a new approach, called Q-PACE, consisting of a second-order sensitivity model that predicts the loss increase as a sum of quantization noise MSE weighted by per-layer curvature coefficients. During training, we periodically re-compute these coefficients using perturbations across layers, and re-assign precision. Pretraining and supervised fine-tuning experiments on LLMs of up to 4B parameters show that Q-PACE consistently improves over existing mixed-precision training recipes, and achieves comparable loss at substantially lower total memory budgets. We further find that quantization sensitivity is highly predictable by depth and layer type, and its stability during training allows for infrequent, cheap recalibration.

0.15

HBQ: Hierarchical Scaling Block Quantization with Hardware-Efficiency-Aware Design for Accurate LLM Inference

cs.LG cs.AIcs.AR ·2026-08-31 ·Chun-Ting Chen, Dongmin Han, Hangyeol Mun, Jake Hyun, Arnab Raha +4 more
top venuecode/data similarity 0.65
Abstract · This work is accepted to the 59th IEEE/ACM International Symposium on Microarchitecture (MICRO 2026)

Block Quantization (BQ) enables efficient LLM inference by quantizing both weights and activations, but its design space remains underexplored. Through hardware-accuracy design space exploration, we identify block size as a key trade-off: larger blocks improve hardware efficiency by amortizing dequantization and accumulation costs, but degrade accuracy. Motivated by this insight, we propose Hierarchical Block Quantization (HBQ), which combines large blocks with low-overhead significand (SIG) scaling for second-level quantization. SIG scaling effectively compensates for large-block quantization errors while accounting for distinct weight and activation distributions. HBQ-A achieves W4A16-level accuracy with W4A5 and lower area than NVFP4, while HBQ-E further reduces hardware cost by 17% while outperforming existing BQ methods in accuracy. We implement HBQ for weights, activations, and KV cache in a 28nm ASIC accelerator and introduce partial-sum BQ to reduce EMA energy. At comparable accuracy, HBQ achieves 2.3x/4.6x higher area/energy efficiency than state-of-the-art weight-only quantization and 1.6-3.3x lower system energy with 1.5-3x speedup over prior BQ methods. Our implementation is publicly available at: https://github.com/SeoLabCornell/HBQ.git.

0.56

Q-Strata: Hierarchical Bit Allocation for Mixed-Precision Quantization of Mixture-of-Experts LLMs

cs.LG cs.AI ·2026-08-31 ·Deokjae Lee, Sihun Chu, Hyun Oh Song
top venuecode/data similarity 0.64
Abstract · EMNLP 2026 Long Paper - Main Conference

Mixed-precision quantization (MPQ) assigns a different bitwidth to each linear layer of a large language model (LLM) to minimize the quantization-induced quality loss under a fixed budget, but Mixture-of-Experts (MoE) models contain these layers in every expert of every MoE block, so the allocation space grows far larger than in a dense model. Existing methods either allocate within each block under a uniform per-block budget, or allocate across blocks through an additive proxy, and neither directly optimizes a model-level objective over the choices that couple the blocks. We propose Q-Strata, a bi-level allocator that ranks within-block assignments with a cheap proxy and allocates across blocks with a model-level objective evaluated on the assembled quantized model. Its inner stage caches a Pareto frontier of candidates per block over finely spaced budgets, leaving the outer stage to set one budget per block instead of a bitwidth for every linear layer. With the search reduced to one budget per block, the outer stage optimizes this model-level objective directly, capturing the inter-block coupling that additive proxies miss. On Mixtral-8x7B-Instruct, Qwen1.5-MoE-A2.7B, and DeepSeek-V2-Lite, Q-Strata consistently achieves lower WikiText2 perplexity than uniform-bitwidth GPTQ and the state-of-the-art MoE MPQ methods MxMoE and GEMQ in the low-bit regime. The code is available at https://github.com/snu-mllab/Q-Strata/tree/main.

0.79

A Target-Centric Survey of Quantization-Aware Training

cs.LG ·2026-08-30 ·Jiamin Song, Mengjie Zhao, Zijing Wang, Yongkang Liu, Qian Li +4 more
top venuesurvey similarity 0.64
Abstract · Accepted to EMNLP 2026 (Main Conference)

The rapid development of LLMs incurs prohibitive memory footprints and intensive computational demands. Quantization-Aware Training (QAT) techniques have emerged as a promising solution to address these challenges by explicitly simulating quantization effects during model training, yielding low-bit models that achieve accuracy comparable to their full-precision counterparts. In this work, we provide a target-centric survey of QAT, aimed at clarifying both its theoretical foundations and its evolving implementation landscape. We systematically review existing QAT methods through a target-centric taxonomy and synthesize cross-target differences in error characteristics, numerical formats, and strategy transferability. We further summarize QAT evaluation paradigms and discuss challenges in optimization and deployment, outlining potential directions for future research.

0.30

ProQuant: Preserving Expert Quality over Quantity in Ultra-Low-Bit Quantization of Mixture-of-Experts Models

cs.AI ·2026-10-22 ·Jiaqi Chen, Xianglong Yan, Chengzhu Bao, Xie Chen, Yulun Zhang
code/data similarity 0.64
Abstract

Mixture-of-Experts (MoE) large language models reduce computation through sparse activation but still incur substantial storage costs. Mixed-precision post-training quantization (PTQ) reduces these costs by quantizing different model components at different bit widths, but existing methods often struggle to preserve generation quality under tight bit budgets. We identify two key challenges: (1) nonlinear quantization errors at extremely low precision are underestimated when cross-layer propagation is ignored; (2) direct router fine-tuning may cause routing drift, and calibration gains may not generalize to downstream tasks. To address these issues, we propose ProQuant, a weight-only PTQ framework for MoE models. Prune-or-Prioritize Mixed-Precision Allocation (PoP) jointly optimizes expert pruning and bit-width assignment. It allows higher-precision experts to substitute for severely degraded ones while improving bit-budget utilization. Routing-Consistent RMSNorm Finetune (RoCo) adapts expert input representations through mathematically equivalent transformations. It compensates for quantization errors to reduce routing drift. Extensive experiments demonstrate that ProQuant outperforms existing methods across diverse generative tasks. Code is available at https://github.com/ThrowBug/ProQuant.git.

0.27

Chameleon: Dynamic Format Adapter for Efficient Diffusion

cs.LG cs.AIcs.CV ·2026-09-27 ·Arnab Sanyal, Sandeep Chinchali
similarity 0.63
Abstract · Under Review at International Conference on Learning Representations 2027

Post-training quantization (PTQ) is the standard way to run modern diffusion models on memory-constrained accelerators, yet every existing diffusion PTQ scheme fixes the $\mathit{number\ format}$ in advance and only tunes the scale, zero point, or per-layer bit-width. At a fixed bit-width the best format depends on the distribution being encoded, and that distribution differs across weight channels, across layers, and along the diffusion timestep, where activation distributions slide from heavy-tailed and noise-dominated to tightly clustered and structured. We propose Chameleon, a PTQ framework that holds the bit-width fixed and treats the format itself as a discrete variable, chosen per weight channel and per (layer, timestep bucket) activation tensor. Activation formats come from {INT8, FP8 E4M3, FP8 E5M2, MXFP8, MXINT8}, selected ahead of time from two cheap statistics (empirical kurtosis and the closed-form diffusion SNR) and stored in a lookup table; weight formats come from {INT8, MXINT8} at 8 bits or {INT4, NF4, FP4 E2M1, MXINT4, MXFP4} at 4 bits, selected offline by reconstruction error. An architectural fork adapts the same selection layer to multi-step UNets, single-step distilled models, and Diffusion Transformers. Across SDXL, SDXL-Turbo, and PixArt-$α$ on COCO-2014, Chameleon achieves the best FID in all six backbone $\times$ bit-width settings, with CLIP within 0.24 of the FP16 reference and the best of all quantized methods at $W_{4}A_{8}$.

0.26

BitLLM: Efficient Low-Bit, Conversion-Hiding LLM Decoding on Mobile GPUs

cs.AR cs.LGcs.OScs.PF ·2026-10-31 ·Hangyu Zheng, Zhihao Shu, Kunxiong Zhu, Minghai Qin, Xiaolong Ma +2 more
top venue similarity 0.63
Abstract

The rapid scaling of large language models (LLMs) has unlocked remarkable capabilities across various domains. However, deploying LLMs on mobile devices remains challenging because of their high computational and memory requirements. Low-bit quantization (e.g., 4-bit weights, 8-bit activations) can reduce model size while preserving accuracy, but its practical efficacy on mobile GPUs has been limited so far. In this paper, we identify that the performance gap stems primarily from frequent data type conversions between quantized and floating-point values, and dynamic and inefficient memory access patterns caused by the growing Key-Value (KV) cache during autoregressive decoding. We introduce BitLLM, a mobile inference engine that addresses type conversion overhead and suboptimal memory accesses in quantized LLMs. Our approach features an adaptive layout and packing strategy for the KV cache that ensures efficient memory access throughout LLM decoding. This is coupled with an integer-native execution pipeline that defers and overlaps type conversion outside the compute hot path, keeping the critical MatMul stages in the integer domain. Implemented on off-the-shelf mobile GPUs, BitLLM outperforms leading engines, i.e., LLAMA.CPP, MNN-LLM, LiteRT-LM, and MLC-LLM, achieving average speedups of 1.78$\times$, 1.73$\times$, 1.58$\times$, and 1.47$\times$, respectively, across various models and quantization levels. Under long-context generation, BitLLM reduces average energy consumption (per token) by up to 88.9%.

0.57