CS Paper Radar

Significance-Driven Semantic Communication

Christian McDowell, Andrea Panebianco, Sirin Chakraborty, Yin Sun

cs.IT ·submitted 2026-08-28 15:28 UTC · v2

Abstract

In this paper, we study a significance-driven cross- layer semantic communication design problem. Based on sta- tistical decision theory, we introduce an information-theoretic measure of per-sample data significance that quantifies the task-specific value of each individual observation. Using this metric, we formulate a cross-layer optimization problem that simultaneously optimizes (i) physical-layer semantic encoding and inference and (ii) MAC-layer resource allocation, with the objective of maximizing semantic spectrum efficiency, defined as the semantic value delivered per unit bandwidth per unit time. At the physical layer, we develop Meta-Learning Variational Information Bottleneck (Meta-VIB), a new semantic transceiver that employs a meta-learned hypernetwork to compress high- dimensional observations into semantically significant latents, enabling instantaneous adaptation to dynamic channel conditions and varying symbol budgets without online retraining. At the MAC layer, we model channel allocation as a Multi-Action Restless Multi-Armed Bandit (MA-RMAB) and adopt the Q- Maximization algorithm, which dynamically allocates channel resources to sensors based on their semantic value of information. Experimental results on a real-world pedestrian safety dataset demonstrate that our joint design achieves substantial gains in semantic spectrum efficiency over baselines, reaching up to 1000 times gain at an average SNR of 0 dB and 40 times gain at an average SNR of 5 dB.

Closest papers

Nearest neighbours by meaning across the whole index.

MetaCom: Meta Codebook Learning for Robust V2X Semantic Communications

cs.IT ·2026-11-11 ·Muge Yu, Danlan Huang, Xinyi Zhou, Shuqi Chai, Zhiyong Feng
published similarity 0.67
Abstract · 5 pages, 5 figures. Accepted by IEEE Communications Letters

Collaborative perception in Vehicle-to-Everything (V2X) networks faces dual challenges: strictly limited bandwidth and channel impairments. Existing static quantization schemes often suffer from feature manifold drift caused by highly non-stationary traffic environments. To address this, we propose MetaCom, a robust digital semantic communication framework featuring a Meta-Codebook Learning paradigm. First, we introduce a Differentiable Quantized Semantic Communications (DQSemCom) module trained with perturbations induced by the simulated digital modulation and channel via Gumbel-Softmax relaxation. Building on this, we design a Bi-Level Meta-Evolution Mechanism (Bi-MEM) that treats manifold drift as a sequence of rapid adaptation tasks, aligning the codebook via data-level smoothing and parameter-level meta-updates. Furthermore, we validate MetaCom under AWGN, Rayleigh, and Rician fading channels. Experimental results demonstrate that MetaCom achieves superior trade-offs between perception precision and communication overhead, outperforming state-of-the-art methods by a significant margin under low-SNR conditions.

0.43

A Semantic-Aware Multiple Access Scheme Leveraging Spatial Redundancy for Uplink-Dominant Network Services

cs.NI ·2026-09-03 ·Hamidreza Mazandarani, Masoud Shokrnezhad, Tarik Taleb
publishedbenchmark similarity 0.65
Abstract · This manuscript has been accepted for publication in IEEE Transactions on Network and Service Management

The transition toward semantic-aware communication offers a paradigm shift for next-generation mobile networks, promising to decouple information significance from raw data transmission. Despite advances in semantic extraction, the integration of semantic intelligence into the Medium Access Control (MAC) layer remains underexplored, particularly in exploiting spatial correlations among users. To address this, we introduce a novel multiple access scheme designed for uplink-dominant network services. This framework optimizes the trade-off between spectrum utilization and sustainability by formulating variable-packet-length access as distinct $α$-fairness and energy efficiency problems. A key innovation of our approach is the quantification of spatial redundancies through novel metrics of self-throughput and assisted-throughput, which account for the semantic correlation of data across user equipment. We analyze these formulations to identify optimal bounds before proposing PRISM (Protocol for Redundancy Identification in Semantic Multiple-access). Grounded in Model-free Multi-Agent Deep Reinforcement Learning (MADRL), PRISM enables devices to autonomously govern spectrum access using only local observations. Extensive evaluations demonstrate that PRISM successfully leverages redundancies to outperform semantic-oblivious schemes, achieving up to \({90\%}\) of the centralized optimal benchmark and improving both objectives by up to \({2\times}\) across diverse user-semantic association matrices. These results validate PRISM as a viable candidate for future distributed mobile network applications, complemented by orthogonal Multiple Access Schemes where signals are multiplexed in the semantic domain.

0.62

Adaptive Unequal Error Protection for Semantic Split Learning over Wireless Channels

cs.IT eess.SP ·2026-08-17 ·Vukan Ninkovic, Dejan Vukobratovic, Dragisa Miskovic, Chao Wang
published similarity 0.65
Abstract · Accepted for publication at IEEE Communications Letters

We propose a task-aware semantic split learning (SL) framework for wireless edge-cloud inference, in which the reliability of transmitted latent representations is dynamically adapted to their relevance for the downstream task. An autoencoder (AE)-based physical (PHY) layer enables end-to-end learning of the communication interface, while unequal error protection (UEP) is realized via mutual information (MI)-driven prioritization of latent components during training. The gradient of the estimated MI with respect to each latent component serves as a sensitivity-based proxy for task relevance, providing a fully learning-driven prioritization that adapts to both the data distribution and the downstream task. We further show that this prioritization translates into measurable physical-layer effects: MI-guided UEP assigns significantly higher transmit power to the most task-critical latent components compared to the equal error protection (EEP) baseline. Experiments on real-world IoT sensing data demonstrate consistent gains over equal and fixed-UEP baselines across SNR regimes. Additional analysis confirms ranking stability, estimator robustness and generalization across datasets and task types, indicating broad applicability of the proposed framework.

0.31

Prospective Importance-based Cognitive Pilot Design for Semantic Sensing in ISAC Systems

eess.SP ·2026-11-09 ·Guanping Shang, Anzheng Tang, Zeyan Zhuang, Shenghui Song
similarity 0.63
Abstract · The paper has been submitted to the 2027 WCNC conference

Semantic sensing enables integrated sensing and communication (ISAC) systems to acquire environmental information relevant to downstream tasks. However, existing pilot design methods either rely on static pilot configurations or learn end-to-end pilot selection policies, without explicitly evaluating the semantic contribution of candidate pilot locations. In this work, we propose a cognitive semantic sensing framework for human activity recognition in orthogonal frequency division multiplexing (OFDM)-ISAC systems. Rather than directly learning a high-dimensional mapping from observations to pilot locations, we introduce a semantic importance weight (SIW) to measure the semantic contribution of each candidate pilot location. Leveraging the information bottleneck (IB) principle and the mutual information-minimum mean-square error (I-MMSE) relationship, SIW assigns high values to future time-frequency (TF) channel coefficients that are both difficult to infer from the preceding observations and valuable for downstream inference. To efficiently obtain the SIW, we further develop a conditional diffusion model that predicts the corresponding uncertainty through denoising covariance estimation. Experiments on a real-world Wi-Fi sensing dataset show that the proposed method consistently outperforms baselines across different signal-to-noise ratios (SNRs) and pilot budgets.

0.37

Agentic Semantic Sensing for Resource-Adaptive AI-RAN

cs.AI eess.SP ·2026-10-06 ·Zhongqin Wang, Xiaoqi Zhang, Nan Yang, Kai Wu, J. Andrew Zhang +1 more
similarity 0.62
Abstract

Semantic sensing (SemS) acquires task-relevant information rather than reconstructing complete physical information. Existing SemS formulations typically operate open loop: sensing configurations and observation schedules are fixed before inference and cannot respond to evolving task-level evidence. We propose Agentic SemS, a closed-loop framework for AI-enabled radio access networks (AI-RANs) that controls sensing within a communication-feasible profile set. A profile-conditioned causal Transformer updates the semantic belief from streaming observations, while key-value caching enables efficient state updates across profile changes without repeatedly processing the complete history. A semantic utility network estimates the task-level benefit of acquiring the next observation block under each feasible profile after accounting for sensing cost. The resulting continuation utilities jointly support next-profile selection and semantic early exit, adapting sensing configuration and duration to evolving evidence. The expected semantic gain is further related to conditional mutual information, providing a value-of-information interpretation of continued online sensing. Experiments on Widar3.0 with six emulated sensing profiles show that, in comparison with full-sequence High, the resource-efficient Agentic setting reduces normalized cumulative sensing cost by 25.33% while achieving 85.79% Macro-F1. At the same utility checkpoint, semantic early exit provides a further 12.35% cost reduction over adaptive sensing without early exit, with a 0.97-percentage-point Macro-F1 decrease.

0.14

Wireless Physical-Layer Foundation Models: Architectures, Learning Paradigms, Applications, and Deployment

eess.SP ·2026-08-20 ·Mohammad Cheraghinia, Davide Buffelli, Liu Li, Mohammad Alhellani, Jaron Fontaine +4 more
hot direction similarity 0.62
Abstract

Foundation models, i.e., large neural networks pretrained on broad unlabeled data and adapted to many downstream tasks, have reshaped natural language processing and computer vision and are now being explored for the wireless physical layer. Wireless Physical-Layer Foundation Models (WPFMs) aim to learn transferable representations of signals such as channel state information (CSI), in-phase and quadrature (IQ) samples, and spectrograms so that a single pretrained backbone can support tasks ranging from channel estimation and prediction to localization and sensing while using limited task-specific data. This paper provides a dedicated review of WPFMs from learning design to practical deployment. We first establish the theoretical background, covering the neural architectures used for wireless signals, the self-supervised pretraining paradigms of masked modeling, contrastive learning, and generative pretraining, and the fine-tuning strategies that adapt pretrained models to downstream tasks. We then introduce a taxonomy that organizes existing models along five dimensions: architecture family, input modality and tokenization, pretraining objective, model scale and deployment target, and generalization capability. Building on this basis, we review applications across telecommunications, localization, and sensing, and, for each domain, analyze deployment feasibility by mapping model size to the memory, compute, and latency budgets of representative wireless hardware. Finally, we discuss model compression and efficient deployment, summarize the cross-cutting challenges, and outline open research directions. Our goal is to provide a reference that connects pretraining, architecture, and fine-tuning with the practical constraints of wireless systems.

0.47

SemISAC: Semantic Integrated Sensing and Communications

eess.SP ·2026-09-16 ·Xiaoqi Zhang, J. Andrew Zhang, Zhongqin Wang, Chang Liu, Weijie Yuan +2 more
similarity 0.60
Abstract

Conventional integrated sensing and communications (ISAC) systems primarily integrate communications and sensing through shared physical resources, without explicitly exploiting task-relevant semantic information. To move beyond such physical-level integration, we propose semantic ISAC (SemISAC), a general framework that unifies semantic communication (SemCom) and semantic sensing (SemS) to convey source meaning and acquire environmental meaning. Specifically, the transmitter combines source semantics and sensing task information with available side information to design the shared waveform and allocate radio resources, while the receiver-side communication and sensing task decoders recover the source meaning and infer the required environmental information, respectively. We also provide an information-theoretic interpretation to characterize the relationship between physical and task-relevant information and the resulting semantic trade-off in SemISAC. Building on this framework, we formulate the general SemISAC design problem and propose two realization methods, namely end-to-end (E2E) SemISAC optimization and modular SemISAC optimization. As a concrete realization, we apply modular SemISAC optimization to jointly design a learnable time-frequency (TF) precoder in an orthogonal frequency-division multiplexing (OFDM) system for representative SemCom and SemS tasks. Simulation results demonstrate that the proposed realization reduces sensing semantic distortion under a given communication requirement and achieves a more favorable communication-sensing trade-off than baseline designs.

0.41

Cooperative Multi-Task Semantic Communication for Joint Classification and Regression Tasks

eess.SP cs.LGeess.IVstat.ML ·2026-09-03 ·Ahmad Halimi Razlighi, Mohammad Siddiqur Rahman, Maximilian H. V. Tillmann, Edgar Beck, Armin Dekorsy
benchmark similarity 0.60
Abstract · This work has been submitted to the IEEE for possible publication

Multi-Task semantic communication (SemCom) prioritizes simultaneous execution of multiple tasks over bit-accurate reconstruction in future intelligent networks. In our prior work [1], we introduced the cooperative multi-task SemCom (CMT-SemCom) framework, in which the semantic encoder is divided into a common unit (CU) and multiple specific units (SUs) to facilitate cooperative multi-task processing. However, CMT-SemCom has been evaluated on homogeneous classification tasks on simplistic datasets, limiting its applicability to real-world perception systems. In this paper, we extend our CMT-SemCom to jointly handle heterogeneous classification and regression tasks on the complex Cityscapes dataset. We adopt the information maximization (InfoMax) principle so that it accommodates mixed discrete and continuous semantic variables. In particular, we benchmark the proposed framework against independent single-task training, a conventional task-agnostic digital transmission, and single-encoder multi-decoder SemCom. Additionally, we investigate the impact of CU capacity on joint task performance, providing design insights. Extensive evaluations demonstrate that CMT-SemCom significantly outperforms the benchmarks.

0.24