CS Paper Radar

The Potential of Haptic Foundation Models

Jianquan Wang, Haiwei Dong, Abdulmotaleb El Saddik

cs.RO cs.CVcs.MM ·submitted 2026-08-23 03:30 UTC · v1
publishedbenchmark

Abstract

Despite the success of foundation models in language and vision, their expansion into embodied AI is bottlenecked by a lack of generalized touch sensing. This limitation is especially relevant to consumer electronics, where smartphones, wearables, VR controllers, home robots, and health monitoring devices require safe and adaptive physical interaction. Constrained by hardware heterogeneity and the necessity of active physical data collection, current haptic models remain rigidly task-specific. To overcome these limitations, this article explores the transformative potential and developmental trajectory of Haptic Foundation Models (HFMs). We detail the paradigm shift required to transition from passive Large Language Models and Vision Language Models into active HFMs across four core dimensions: action coupling, physical dynamical representation space, continuous time-series data granularity, and action-conditioned future state prediction. Furthermore, we synthesize existing large-scale tactile datasets and benchmark UniTouch, AnyTouch, T3, and Sparsh on TacBench for force estimation, slip detection, and relative pose estimation.

Comment
accepted by IEEE Consumer Electronics Magazine
DOI
10.1109/MCE.2026.3723054

Closest papers

Nearest neighbours by meaning across the whole index.

Learning Heterogeneous Tactile Representation for General Dexterous Manipulation

cs.RO ·2026-11-09 ·Bing Han, Yichuan Peng, Haoyu Dong, Yuanmeng Hu, Yongyi Jia +14 more
community pickpopular code similarity 0.76
Abstract

Tactile sensing is an indispensable modality for contact-rich dexterous manipulation, a capability that hints at the ultimate frontiers of embodied intelligence. However, commercially available tactile sensors are still at a relatively early stage of development, with each type of sensor offering irreplaceable strengths alongside its own drawbacks. A key challenge is thus to free tactile understanding from sensor-specific physics, so that embodied models can effectively leverage heterogeneous tactile data. To this end, we develop LingBot-Touch, a tactile foundation model characterized by the following properties. (i) Our model yields a unified representation across different tactile sensors (i.e., piezoresistive, magnetic, and visuotactile sensors), and is easily extensible to new sensor types. (ii) The resulting tactile tokens are plug-and-play: they can be seamlessly integrated into policy models across paradigms, from diffusion policy to vision-language-action (VLA) models such as $π_{0.5}$ and LingBot-VLA, consistently enhancing manipulation dexterity. (iii) Extensive experiments, spanning simulation and real-robot deployments across multiple hardware platforms, demonstrate that our tactile representation substantially benefits complex manipulation tasks while maintaining strong computational efficiency. We believe the findings in this work demonstrate the potential of leveraging cross-sensor data to scale tactile learning, and offer encouraging insights for the design of future hardware and embodied models.

0.19

Spark-0: Scaling Spatially Aligned Tactile Pretraining for Robot Dexterous Manipulation

cs.RO ·2026-10-15 ·Tianxing Chen, Wenwei Lin, Chuqiao Lyu, Peicheng Xiang, Junyuan Tang +17 more
benchmark similarity 0.71
Abstract · Website: https://xsparkai.com/Spark-0

Generalist robot policies benefit from large-scale visual pretraining but often struggle with contact-rich dexterous manipulation, where force, compliance, and incipient slip are hard to observe from images. We present Spark-0, a spatially aligned vision-tactile-language-action (VTLA) model that uses touch in two complementary ways. During pretraining, image-space contact maps derived from tactile gloves, together with features from a frozen 3D geometry teacher, supervise the visual tokens; these objectives are removed at inference. In parallel, a tactile pathway encodes regional force histories and 3D taxel states to condition the action expert. A single checkpoint therefore supports both vision-only and tactile-conditioned deployment. To scale this supervision, we build HumanTouch, a 1,000-hour dataset of full-hand tactile human manipulation, and pretrain Spark-0 on it together with egocentric video, robot data, and simulation. We also release SparkArena, which pairs vision-only simulated tasks with tactile-conditioned real-robot tasks on one dexterous embodiment. Spark-0 achieves the highest mean success rate on both SparkArena tracks and ranks first on all eight aggregate metrics of the Ego Humanoid Manipulation Benchmark. Compared with vision-only pretraining on the same data and compute with touch discarded, retaining the touch of 1,000 hours of HumanTouch raises vision-only success on Ego Humanoid from 52.5% to 71.7%, and success on SparkArena-Real, where touch is also used at deployment, from 44.0% to 52.0%, indicating that touch serves not only as a policy input but also as scalable supervision for dexterous visuomotor pretraining. The Website is available at: https://xsparkai.com/Spark-0.

0.20

ACTS: Learning Visuo-Tactile World Models from Human Physical Interaction

cs.RO ·2026-10-16 ·Yuxiang Ma, Weihan Xu, Pengfei Ye, Anna Mei, Yuxin Ray Song +3 more
similarity 0.71
Abstract · Project website: https://acts-anon.github.io/

Abstract Action-conditioned world models for contact-rich manipulation require data that captures how contact forms, slides, and releases under varying force. Such data are slow to collect through robot teleoperation, which often lacks force feedback and is constrained by gripper geometry. We ask whether these dynamics can instead be learned from human physical interaction and transferred to a robot. We present ACTS, a visuo-tactile world model trained only on human interaction data. Operators manipulate handheld GelSight sensors while we record third-person and wrist video, tactile images, 6-DoF sensor motion, and tactile-derived normal force, yielding React, a 4.9-hour bimanual dataset across three objects. We represent actions at the tactile sensor as motion augmented by force change, providing a shared action space for human collection and robot execution. ACTS jointly predicts future scene, wrist, and tactile observations. On held-out human data, ACTS improves scene-view prediction by 0.7-2.0 dB PSNR over the stronger of two visuo-tactile world models trained from scratch on React. Without fine-tuning, in the robot teleoperation rollouts we inspected, predicted tactile imprints still appear and disappear with recorded contact. Visual transfer is less robust: camera predictions exceed frame copying on PushT, are mixed on Rope, and fall below it on Motherboard, while wrist views can blur or hallucinate structure. These results suggest that contact dynamics transfer more reliably than visual appearance from human to robot.

0.22

SimpleTouch: Can Vision-Language-Action Models Master Contact-Rich Manipulation Without Tactile Policy Pretraining?

cs.RO ·2026-10-02 ·Chen Yang, Linzhe Shi, Changjie Wu, Hang Zhang, Ronghan Chen +5 more
code/data similarity 0.71
Abstract · 27 pages, 11 figures

Tactile sensing provides essential contact information for robotic manipulation, yet incorporating it into pretrained vision-language-action (VLA) models remains challenging. A common concern is that simply introducing touch during task-specific fine-tuning may fail to bridge the cross-modal gap, yielding limited gains or even reduced success. Consequently, existing methods often rely on large-scale tactile policy pretraining or separate visuotactile alignment, adding data requirements and training stages. We introduce SimpleTouch, a simple VLA extension that augments $π_{0.5}$ with a tactile expert, to test whether these additional stages are necessary. Leveraging all tokens from a frozen pretrained tactile encoder, the expert learns from action supervision and multi-horizon prediction of future tactile latents. This single-stage training uses only task demonstrations, without additional tactile policy pretraining or separate alignment. With 50 demonstrations per task, SimpleTouch achieves the highest success rate among evaluated methods on all six UniVTAC tasks. Its average success rate reaches 77.5%, compared with 45.2% for FTP-$π_{0.5}$ and 66.7% for FTP-1, corresponding to gains of 32.3 and 10.8 percentage points, respectively. Across four real-world tasks, it averages 71.3%, exceeding FTP-1 by 8.8 percentage points. These results demonstrate that, given pretrained VLA and tactile representations, additional tactile policy pretraining is not a prerequisite for strong performance on these tasks, offering a simpler route to contact-rich manipulation. Project page: https://simpletouch-robot.github.io/

0.54

HiTac-WAM: A Hierarchical Tactile World Action Model for Contact-Rich Robot Manipulation

cs.RO ·2026-08-20 ·Chao Xue, Chaofan Zhang, Wenxuan Ma, Guocai Yao, Shaowei Cui +1 more
similarity 0.71
Abstract · 8 pages, 7 figures, and 3 tables

World action models jointly predict future visual observations and actions, whereas existing tactile-aware variants typically represent future touch as an image or latent stream without modeling the physical dependencies that organize tactile states hierarchically. We present HiTac-WAM, a hierarchical tactile world action model that forecasts a sequence of future tactile states for each candidate action chunk before execution. The forecast factorizes into contact state, a 3D deformation field, and slip risk, organized as a directed hierarchy in which each downstream stage is conditioned on stop-gradient signals from preceding stages. A directed attention mask allows tactile queries to attend to the video-action context of each candidate while preventing video and action queries from attending to tactile tokens. For planning, HiTac-WAM ranks candidate action chunks using tactile forecasts and task-progress estimates. For execution, the selected tactile forecast is retained as a reference; persistent discrepancies between predicted and observed tactile states trigger corrective replanning. HiTac-WAM achieves a mean contact F1 of 0.921; under matched training budgets, the directed hierarchy reduces 3D displacement L2 error by 17.6% relative to the deformation-only predictor and improves slip AUPRC by 60.4% relative to the slip-only predictor. Across chip grasping, blackboard erasing, and USB insertion, selection guided by the hierarchical forecasts increases the average real-robot success rate from 31.1% to 61.1%, while the full system attains 72.2%.

0.42

Visuo-tactile Diffusion Policy for Robotic Manipulation with Auxiliary Tactile Dynamics Prediction

cs.RO ·2026-11-02 ·Kaihong Ouyang, Zihao Su, Chengxuan Zheng, Weiyi Lai, Dong Zhou
published similarity 0.69
Abstract · 7 pages, 2 figures. Presented at ICCSSE 2026

Long-horizon robotic assembly requires reliable perception and action across grasping, alignment, and insertion. Vision captures global object pose and scene context, where as fingertip touch provides local contact cues that are especially useful as contact states change. We present a visuotactile diffusion policy that combines four-step histories from two camera views and two fingertip tactile images to condition action-sequence generation. A recurrent temporal representation integrates recent observations from both modalities. To encourage it to capture how contact evolves under action, an auxiliary objective predicts fingertip-image changes two steps ahead from the temporal representation and demonstrated actions. This objective is used only during training and adds no inference-time computation. Across three independent training seeds in MuJoCo assembly experiments, the full model achieves an average success rate of $59.0\% \pm 2.6\%$, improving on the visual-only baseline ($42.7\% \pm 1.5\%$) by 16.3 percentage points.

0.27

Dexterous Robotic Hands in the Foundation-Model Era: A Full-Stack Survey of Hardware, Data, Cross-Embodiment Transfer, Learning, and Evaluation

cs.RO cs.AIcs.CVcs.LG ·2026-11-04 ·Ji Pei
survey similarity 0.69
Abstract · 45 pages, 8 figures, 21 tables. Structured narrative review of hardware, data, cross-embodiment transfer, foundation models, tactile sensing…

Dexterous robotic hands are increasingly coupled to large-scale human data and foundation models, yet progress in hardware, representation learning and evaluation is often assessed separately. This survey reviews work from January 2024 to early November 2026, with earlier studies included to establish technical lineages. We organize the literature into five interdependent layers: hardware; data collection and curation; cross-embodiment transfer; learning and foundation models; and evaluation and applications. Human hand-object understanding and tactile sensing provide two cross-cutting perspectives. A system-level architecture, comparative tables and five case analyses connect design choices across these layers. We distinguish within-study experimental comparisons from heterogeneous corpus statistics, vendor specifications and company-reported results. Three conclusions emerge. First, the value of human data depends on kinematic, visual and contact alignment, not recording volume alone. Second, shared action representations and foundation policies do not remove embodiment-specific constraints on force, latency and contact. Third, task completion is insufficient to establish physical correctness or deployment readiness. Evidence remains limited for zero-shot transfer of contact-rich skills between morphologically different hands, long-duration reliability, and cross-sensor tactile generalization. We identify eleven open problems and propose reporting interfaces and controlled comparisons that can make full-stack progress more measurable. The review is a structured narrative synthesis rather than a pooled performance ranking or an exhaustive systematic review.

0.15

TacMind: Benchmarking and Modeling Tactile Interaction States for Robotic Manipulation

cs.RO ·2026-10-30 ·Jiaxin Shi, Zibin Wu, Yichi Zhang, Jianghua Duan, Siyu Zhu +1 more
benchmarkcode/data similarity 0.69
Abstract · Project Page: https://tacmind-bench.github.io/

Tactile sensing provides robots with direct observations of contact physics, local geometry, and interaction dynamics, making it a vital source of feedback for contact-rich manipulation. However, existing tactile manipulation studies are often developed and evaluated within specific task settings, making it difficult to systematically compare how tactile information contributes under different interaction conditions. In this work, we develop a benchmark in simulation comprising 128 tasks organized around three complementary evaluation regimes: Precise, Recognition, and Dynamic. The benchmark further includes controlled static and dynamic task variants and 12 perturbation settings for evaluating robustness under changes in visual and physical conditions. These settings motivate studying tactile information as a temporally evolving interaction representation rather than only as an instantaneous observation. We therefore propose an action-conditioned latent predictive world model that integrates tactile history and learns a tactile state through prediction of future tactile latents. Building on this representation, we design a model that conditions action generation on the learned tactile state and uses predicted future tactile information to refine candidate actions through predictive tactile reflection. Experiments on the proposed benchmark show consistent gains from incorporating tactile information across the evaluated regimes. Project Page: https://tacmind-bench.github.io/

0.18